Providing and fixing powder coated Aluminum doors and Aluminum powder coated ornamental grills in the corridor areas at JamunaAlakananda

Schedule -A -Civil Works

Dismantling granite / tile work in floors and roofs laid in cement mortar including stacking material within 50m lead For thickness of tile 10mm to 40mm. Rate quoted shall include cutting the granite/ tiles for required shape before dismantelling

Demolishing cement concrete including disposal of material within 50m lead 1 : 3 : 6 or richer mix

Brick work with Fly ash concrete blocks of class designation M100 in foundation and plinth in Cement mortar 1:6 (1 Cement : 6 coarse sand / M Sand)

Add Extra for brick work with Fly ash concrete blocks in superstructure above plinth level up to floor V level

15mm cement plaster of mix : 1:4 (1 Cement : 4 Fine sand / coarse sand / M sand)

Providing and laying of 18mm thick Mirror polished Granite of approved colour laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand / M sand) in floors, skirting and parapet wall top, staircase raiser, treads, etc with pointing of the joints in matching pigment and etc complete as per the direction of Engineer-in charge. The granite for corridor flooring, borders, skirtingn, parapet wall top and staircase shall be pre-polished at factory. For payment, the exposed flooring area including border and skirting will be measured in sqm. Rate quoted shall include the cost for making necessary cuttings/ holes to facilitate fixing of handrails, providing double grooves at the edge of staircase treads, etc.

Extra for providing edge moulding to 18mm thick stone counters, vanities etc., including machine polishing to edge to give high glass finish etc., complete as per design approved by Engineer - in – charge Granite work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand / M sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 1200x600 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead

Providing and laying Polished Granite Stone tile in required design and patterns, in linear as well as crvilinear portions at Flooring, on parapet wall tops, skirting, borders, step raisers, treads, etc of the building all complete as per the requirement with 10 to 12mm mm tk. Stone slab over avgerage thick base of cement mortar 1:3( 1 Cement : 3 coarse Sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc., all complete as specified and sa directed by the Engineer- in-Charge. Model - Black Granite Tile for skirting

For shutters -Providing and Fixing colour anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS :733 and IS 1285, fixed with rawl plugs and scews or with fixing clips, or with expansion hold fasterns including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / Stainless steel screws, all complete as per architectural drawings and the directions of Engineer - in- charge. (Glazing and panelling to be paid for separatelly) For Shutters Anodised aluminium (anodised transport or colour anodized dyed to required shade according to IS 1868, Minimum andioc coating of grade AC 15)

Providing and Fixing colour anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS :733 and IS 1285, fixed with rawl plugs and scews or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / Stainless steel screws, all complete as per architectural drawings and the directions of Engineer - in- charge. (Glazing and panelling to be paid for separatelly) For fixed portion Anodised aluminium (anodised transport or colour anodized dyed to required shade according to IS 1868, Minimum andioc coating of grade AC 15)

Filling the gap in between aluminum frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Up to 5mm depth and 5 mm width

Providing and fixing of glazing to door/ window/ ventilator shutter and partition etc with pvc neoprene gasket / wooden reapers / necessary adhesives etc complete as per the direction of engineer in charge (Saint Gobain / Modifloat). 5mm thick float glass

Providing and fixing 10-12mm thick cement board / Calcium silicate /bison board or equivalent) over the alumium frame of the doors, widows etc.

Providing and fixing of aluminum colour powder coated (50 micron) ornamental grill for window using 50x50mmx6mm size opening fixed on aluminum frame with heavy duty aluminum U channel with all-round of grill and the rate including labour and material. (the rate of frame will be paid seperately) (Alumnium grill weight shall not be less than 3.5Kg/ Sq).

Providing and Fixing Aluminum Handles ISI marked anodised (anodic coating not less than Grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc., complete: for 150mm. (JAL / CLASSIC / CROWN)

Providing and fixing aluminum butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete (Classic, Crown, Jal) 75x63x4mm

Providing and fixing ISI : 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete 125 x 64 x 1.90 mm

Providing and fixing IS 3564 marked Aluminum die cast body tubular type universal hydraulic door closer hardwyn make (classic queen) or equivalent with necessary accessories and screws etc complete

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cussion, screws etc. to suit shutter thickness complete (Godrej / Link)

Providing and fixing aluminum tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete (Classic, Crown, Jal) 300 x 10 mm

Providing and fixing aluminum tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete (Classic, Crown, Jal) 100 x 10 mm

Providing and fixing aluminum handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete (Classic, Crown, Jal) 100 mm

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing paint surface

Applying super premium quality 100% Exterior Acrylic (Asian / ICI /Berger / Nippon / Nerolac) emulsion : (Fresh work including complete scraping / surface preparation, as appropriate base (primer) coat and top two or more coats). Applying exterior paint of approved colour, make, brand and surface coverage of painting as per the manufacturer specification. The exterior paint shall be applied over dry surface after complete scraping and removal of all loose or defective paint or powdery residue using mechanical methods with Zero dust vaccum technology followed with High pressure Jet washing and sealing the surface with necessary exterior base coat or primer before application of top coat of exterior paint. The contractor shall also carryout necessary surface preparation including removal of loose plastering, patch plastering, crack filling, micro-concreting, application of damp proof coating and making good the wall surface etc wherever required before applying base or primer coat. The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The rate quoted shall be inclusive of charges towards all labour, material, transport , scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc but excluding the cost of waterproofing, attending to leakages and major civil repair works if any. The Paint manufacturer shall inspect the work in every stage, submit inspection / field test report, certify the product / application and give 10 year Guarantee.

Painting with water based enamel paint : Wall painting using water based enamel paint (ICI /Asian / Berger): (two or more coats over a primer coat including complete scraping and surface preparation) Applying water based enamel paint of approved colour, make, brand with surface coverage of painting as per the manufacturer specification. The water based enamel paint shall be applied over dry surface after complete scraping and removal of all loose or defective paint or powdery residue using mechanical methods with Zero dust vaccum technology followed with sealing the surface with a coat of approved primer before application of top coat of water based enamel paint. The contractor shall also carryout necessary surface preparation including removal of loose plastering, patch plastering, crack filling, micro-concreting, application of damp proof coating and making good the wall surface etc wherever required before applying primer coat. The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc but excluding the cost of waterproofing, attending to leakages and major civil repair works. - In corrdior

Dismantling doors, windows and clerestory windows (Steel or wood) shutter including chowkhats, Architrave, Holdfasts, etc. complete and stacking within 50m lead : of area 3 sqm and below

Demolishing Brickwork including stacking of serviceable material and disposal of unserviceable material within 50m lead in cement mortar

Providing and Fixing Aluminum sliding door bolts ISI marked anodised (anodic coating not less than Grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc., complete: 250x16mm. (JAL / CLASSIC / CROWN)

Making hole up to 20 x 20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand / M Sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing of CPVC pipe with necessary couplings, solution and special clamp as per approved make Supreme / Ashirvad or Equivalent ISI Make etc. complete.

Supplying and fixing SS cloth hanger of size 280 mm long including fixing in position (with necessary) screws as directed by Engineer-in charge

Supplying and fixing Pvc coated GI wire thickness not less than 2mm at all levels for cloth hanging. complete as per the directions of Engineer incharge.

Supplying and fixing SS D calmp for fixing cloth drying ropes for fixing at all heights for the item sl no 35

Please Enable Macros to View BoQ information