SPECIAL REPAIR TO TOILETS GENTS LADIES OFFICERS JCOS ORS AT P 62 CHOPRA AUDITORIUM AND PROVISION OF FALSE CEILING IN BUILDING NO ENP 229 OF MT WING INCLUDING CONNECTED EM WORKS IN ASC SOUTH 2 ATC UNDER AGE BR II IN GE CENTRAL BANGALORE

Amount

Dismantling Asbestos Cement Corrugated or Semicorrugated in Roof covering .

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing debris outside MD land complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposing serviceable tiles to MES store and the rubbish/debris out side MD land complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors, plinth protection/path/pavings etc not exceeding 15 cm thickness. (below or above ground level) and removing debris outside MD land complete all as specified and directed.

Taking down chowkats or frame, not exceeding 1.5 Sqm in each with shutters (without taking off shutter from the frame) complete all as specified and directed.

M & L for Hardcore of broken/crushed stone aggregate of gauge n.exc 63 mm deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

S&F aluminium anodised coloured powder coated (minimum thickness of powder coating 50 micron) fixed/sliding type ventilators, top portion with wire mesh and louvers with glazing, bottom portion with fixed type glass (pin headed glass) aluminium sections weighing not less than 0.50kg per metre, all are made of from aluminium anodised section including necessary track, jointing cleat, glazing clips, rubber packing anodised aluminium snap beading, screws of suitable size, 4mm thick glass pane and stainless steel wire cloth etc complete all as specified and directed by the Engr-in-Charge.

Supply and fixing ASTER MULTI PURPOSE wall mounted liquid /shampoo/ hand wash/ saniterzier 500ml

Supply and fixing stainless steel hand dryer EH 27 touch free infrared activation, wall mounted type, sensor range 12-15 cm complete all as directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed

S & F 4 mm thick, Figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.

S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 150 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F Rolled mild steel work as in trusses, purlins, posts rafters etc using Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc including cutting, welding complete. Steel section conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.

S & F band, straps, supports or stays for rainwater pipes, ventilating pipes, including bolts if required hooks (stay), heavy duty, for large gate, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, wind ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and the similar small articles conforming to Fe-290 Gde- E-165 all as directed.

S&F false ceiling of 4mm thick designer ceiling board, prepainted cement fibre board of size 595x595 mm of any texture (lake and hill,oceanic,cascade or Electra) using GI snap grid system with rool formed out of hot dip galvanised steel capings (powder coated).The suspension system consisting of perimeter wall angle of size 24x24/19x19 mm 0.45 mm of thick GS sheet to secure on wall portion face with the help of rawl plug@ 450 mmC/C universal main runner of T shaped section with single rotary stitching of size (38x24 mm) made from 0.33 GS sheet of length 3.60 mtr to be spaced@1200 mm C/C cross runner T shaped with double rotary stitching of size (30x24mm) of length 1200 mm made from 0.25mm thick GS sheet spaced@ 600 mmC/C (120x600mm) of size module immediate T shaped cross runner of size (25x24 mm) of length 600 mm made of 0.25 mm thick GS sheet to form(600x600mm) size of module incl suspension of the ceiling from the roof/structural members,soffit angles,cleats,GI suspenders of 4 mm thick GI wire and level adjiusters all complete and including cost of making opening for light fitting diffusers,cut out to T required line and shape as per manufactures recommendations at any height complete all as specified and as directed. Make of framework and Board :- Eternit Everest / lafarge/ Armstrong or equivalent as approved by GE

M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.

M & L for 40mm thick Plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in sub base, level course of floor, etc complete all as specified and directed.

M & L for granite stone slab (of any type) 18 to 20 mm thick, (table rubbed or polished) in step, jambs, cooking platform and the like, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 20 mm thick screed bed in cement mortar 1:4 & cutting, polishing complete all as specified and directed.

M & L for roundings to edges of stone slabs, one edge, as in steps, cooking platform and other similar situation complete all as directed.

M & L for non-skid, ceramic, coloured tiles, Grade B II(a), 8 to 10mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles, Grade B II(a), 8 to 10mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.36 sqm, in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for ceramic, coloured tiles 7 to 8 mm thick as in skirting to match the length of floor tile procured under No 16 above including 10 mm thick screed bed in cement mortar 1:3 set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for glazed ceramic, coloured tiles joint free tiles 350x250x 7mm/450x350x7 mm thick, Grade B III, as in Dado/Skirting/Steps/vertical surfaces including 10 mm thick screed bed in cement mortar 1:3 set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for cutting holes in stone/brick wall built in cement mortar for insertion of hold fast and making good dismentaled portion by using plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) or Cement mortar 1:3 including necessary form work complete all as specified and directed.

M&L for precast cement concrete block masonry type C1, 1:3:6 (20 mm graded granite stone aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M & L for Precast Reinforced Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slab of drain, etc and set in cement mortar 1:4 including necessary form work, moulds, etc complete all as specified and directed by the Engr-in-Charge. (Note : Reinforcement shall be measured and paid separately)

M & L for Plain cement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregate) as in roof kerb, coping, kneelers, bed plates, filling to gap between roof sheet and wall etc including weathering slightly rounded or chamfered angles including necessary form work complete all as specified and directed.

S & F TMT steel bars 10mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M & L for preparing new plastered surfaces of walls and applying two coats of distemper-oil-emulsion over 1 to 2mm thick wall care putty, finished smooth over a coat of primer complete all as specified and directed.

M & L for preparing old plastered surfaces of walls by complete removal of existing treatment and applying two coats of distemper-oil-emulsion over 1 to 2mm thick wall care putty, finished smooth over a coat of primer complete all as specified and directed.

M & L for for preparing old plastered surfaces of walls by complete removal of existing treatment and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for Preparation of old surfaces walls and applying two coats of white wash complete as specified and directed.

Taking up or down 15mm bore, Steel tubing and connections.

S&F rotational moulded polyethylene water storage tanks 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia brass ball/float valve high pressure with polythene float and flynut, 20 mm water tank nipple suitable for HDPE water tank, including taking down old unserviceible water tank of 1000 litre capacity complete all as specified and directed.

Supplying and laying of 20mm dia CPVC pipes (ISI marked) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in Repair Vitreous China Wash hand basin , white flat back size 550x400 mm including a pair of mild steel angle iron brackets duly painted, erected/embeded in wall, providing Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & 32 mm dia LDPE PVC waste pipe, PVC connection 15 mm size 600 mm long including cutting hole and pinning in ends making good disturbed portion using cement mortar 1:3 complete all as specified & directed by Engineer-in-charge.

S&F in Repair Vitreous China Wash hand basin ,snow white, counter/table top, wall hung of size 640X450X200 mm including 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & 32 mm dia LDPE PVC waste pipe, PVC connection 15 mm size 450 mm long including cutting hole and pinning in ends making good disturbed portion using cement mortar 1:3 complete all as specified & directed by Engineer-in-charge. Make of Basin CERA Cat No S2020132 or equivelent of Make PRAYAG/HINDWARE/PARRYWARE as approved by GE.

Supply and fixing vitreous china urinals with integrated EFS type size 360X330X740mm snow white with grating and union of discharge pipe (back or corner wall type) complete including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinals to plug with and including 60mm long brass screws, pointing around urinal back in cement, 32mm dia waste pipe including 450mm long PVC connection and 15mm size CP push tap complete complete as specified and directed. Make CERA Cat No S1043113 (CROMA) or equivelent of Make PRAYAG/HINDWARE/PARRYWARE as approved by GE.

Supply and fixing vitreous china wall hung EWC of size 550X365X355mm, snow white, with trap, coloured PVC seat and cover, connection with flush pipe using new GI flush bend (Floor portion) and making good to floors, matching to existing surfaces complete. Make CERA Cat No S1043113 (CROMA) or equivelent of Make PRAYAG/HINDWARE/PARRYWARE as approved by GE.

Supply and fixing in repair concealed flushing cistern set with full frame of size 550X95X500 including aquator knob shine finish to make the system fully functional and making necessary connection as directed. Make CERA Cat No B1110108, B1120118 or equivelent of Make PRAYAG/HINDWARE/PARRYWARE as approved by GE.

Supply and fixing stainless steel health faucet brass body with wall hook and one metre SS braided rubber hose pipe. Make CERA Cat No F8030301 or equivelent of Make PRAYAG/HINDWARE/PARRYWARE as approved by GE.

Supply and fixing stainless steel towel rail 600mm long brass body fixed to wall using suitable screws complete . Make CERA Cat No F5002103 or equivelent of Make PRAYAG/HINDWARE/PARRYWARE as approved by GE.

Supply and fixing stainless steel paper holder with flap guard fixed to wall using suitable screws complete . Make CERA Cat No F5002110 or equivelent of Make PRAYAG/HINDWARE/PARRYWARE as approved by GE.

S & F in repair 10 litre capacity, PVC valve less syphonic action type, 32mm dia flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including PVC connection pipe of 15mm dia, 600mm long, brackets complete all as specified and directed.

S&F in Repair Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest S or P trap etc. including 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long and 32mm dia flush pipe, S or P Trap & Provision of concrete bedding and making good to floor all as specified & directed by Engineer-in-charge.

Supply and fixing 110 mm PVC (SWR) WC connector with lip ring complete

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc area not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Supply and fixing RCC pipe, 150mm bore, class NP-3, spigot and socket type, laid and jointed in cement mortat 1:1, complete all as directed.

M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggragate) as in bed to drain pipes including packing under and against the sides of pipes after they are laid and tested complete for 150 mm bore RCC drain pipes complete all as specified and directed.

S&F in repair 15 mm bore pillar tap deck mounted sensor type, cast copper alloy chromium plated with capstan head screwed down to iron pipe, fancy type complete all as specified and directed. Make CERA Cat No F6010102 or equivelent of Make PRAYAG/HINDWARE/PARRYWARE as approved by GE.

S&F in repair 15 mm bore bib taps cast copper alloy chromium plated with capstan head screwed down to iron pipe, fancy type complete all as specified and directed. Make CERA Cat No F2006151 or equivelent of Make PRAYAG/HINDWARE/PARRYWARE as approved by GE.

S&F in repair 15 mm bore stop valves/angle valve cast copper alloy chromium plated fancy type screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make CERA Cat No F2006202 or equivelent of Make PRAYAG/HINDWARE/PARRYWARE as approved by GE.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (Total coated thickness) of any colour, finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with best quality self tapping screws as specified

S & F Pre-Painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and directed. (Colour of ridge shall be same colour as that of sheet used for roof)

Taking down carefully unserviceable aluminium/copper point wiring (light, fan, socket or power) including unserviceable light fittings, switch board complete, switch sockets, ceiling roses, pendants, regulators, sockets, etc and removing materials from site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M & L for Point wiring surface type, with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including providing PVC conduit 'medium grade' conforming to IS-9537 with all fittings and accessories (like Tee, bend etc.) complete in walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point and earth dolly including MS/PVC terminal box with 3mm thick masonite laminated sheet top cover fixed on wall with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed.

All as per item No 91 above but for one 3 pin socket outlet, 5 Amps on Independent board complete all as specified and directed.

All as per item No 91 above but for one 5 Amps, 3/5 pin socket outlet on the same board with other switches complete all as specified and directed.

All as per item No. 91 here in before but wiring with cables of size 2.50 sqmm for wiring & cables of size 2.50 sqmm both (FRLS) as continuous earth wire for one 15 Amps, 6 pin Switch/Socket outlet on Independent board complete all as specified and directed.

S & F switch piano, 5 Amp, single pole, flush type one way 230 volts complete all as specified and as directed.

S & F Switch socket combination, 2 in 1, 5 Amps (bearing ISI marked), flush type, 240 volts complete all as specified and directed.

S & F Switch socket combination, 5 in 1, 5/15 Amps (bearing ISI marked), 240 volts, flush type complete all as specified and directed.

S & F Ceiling rose, 3 phase/PVC/polycarbonate (bearing ISI marked), isolated body including providing PVC square/round block complete all as specified and directed.

S & F Stepped type(five steps) electronic fan regulator flush type complete all as specified and directed. (Make: Anchor, Model No. 14502 or equivalent make as per list of manufacturer)

M & L for Sub main wiring with two runs of 4 sqmm (Nominal area) single core FRLS cable PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through/in and including PVC conduits, medium grade, of suitable size, fixed to wall/ceiling etc with all accessories, fittings, fixures including 4 sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, FRLS copper conductor as earth wire and duly connected to common earth point including PVC conduits/casing-caping of suitable size complete all as specified and as directed by Engineer-in-charge. (Note : PVC Conduits, two run wiring cables and one run of earth wire will be measured as one length.)

M & L for Sub main wiring with two runs of 6 sqmm (Nominal area) single core FRLS cable PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through/in and including PVC conduits, medium grade, of suitable size, fixed to wall/ceiling etc with all accessories, fittings, fixures including 6 sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, FRLS copper conductor as earth wire and duly connected to common earth point including PVC conduits/casing-caping of suitable size complete all as specified and as directed by Engineer-in-charge. (Note : PVC Conduits, two run wiring cables and one run of earth wire will be measured as one length.)

S & F Factory made distribution board (DB), Double Door in sheet steel enclosure fitted with common bus bar neutral link, earth bar and din rail, SPN, 4 way, 240 Volts IP-43, IK -09, suitable for housing MCB'sfixed flush in wall complete all as specified and directed.

S & F Factory made distribution board (DB), Double Door in sheet steel enclosure fitted with common bus bar neutral link, earth bar and din rail, SPN, 8 way, 240 Volts IP-43, IK -09, suitable for housing MCB's fixed flush in wall complete all as specified and directed.

S & F MCB, SPN, 240 Volts, 6 to 32 Amps, 'C' Series, 10KA breaking capacity complete all as specified and directed.

S & F MCB, 'C' Series, SP, 240 Volts, 6 to 32 Amps, 'C' Series, 10KA breaking capacity complete all as specified and directed.

Taking down ceiling fan/exhaust fan and applying one coat of painting at site using synthetic enamel paint using spray painting machine after cleaning properly including provision of suitable size twin core copper cable connecting up with ceiling rose, replacing 2.5/3.15 MFD capacitor, canopy, bearing, bush, rubber bushing, screws, bolts, nuts etc and greasing complete all as directed.

M & L for rewinding of ceiling fan using appropriate size of copper enamrlled wire including varnishing heating with proper insulation including testing complete all as directed.

M & L for hook/clamp for hanging of ceiling fanfabricated out of 40X6mm Mild steel flat iron made to shape as required, fixed on angle iron truss/GI tubing member using necessary bolts, nuts, rubber bushing and washers including two coats of painting over a coat of primer complete

S&F LED tube light fitting of 10 watts 6000K , 230 volt, decorative ultra slim square profile LED lighting fixure with extruded polycarbonate environmental friendly energy efficient glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : Havells Cat No LHEXACP7IN1W010 or equivelent of make Crompton Greaves/Bajaj/Philips

S&F LED tube light fitting of 20 watts 6000K , 230 volt, basic all purpose surface and wall mounted type with polycarbonate housing & integrated electronic driver complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and providing & connecting up with twin core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : Havells Cat No LUMILINEBS20WIED830SPCWH or equivelent of Philips/Crompton Greaves/Bajaj

Supply and fixing in repair 34 Watts LED light 2' X2' LED environmental friendly, new generation, asthetically design, ultra modern recess mounting luminare with high brightness SMD LEDs as light source, suitable for Amstrong/Grid ceiling with all acessories internally pre-wired and conecction up with suitable twin core twisted flexible copper conductor cable complete all as directed. MAKE HAVELLS Cat No PLUTONEO2X2PLR34WLED840S OR equivelent of Make Bajaj/CG/Philips.

S&F energy saving environmental friendly long life, with high power LED building security light 1x 15 Watt LED pressure die-cast aluminium, heat resistant, toughened glass diffuser, IP65/66 and wired with all accessories and connection up with and including 3 core flexible copper conductor cable 4/20 mm size, 1.5m long and testing on installation all as specified and directed. Make: Havell's Cat No. ENDURAPEARLSL15WLED757SASYTOPC or equivelant of make

S&F security light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed.

M & L Earthing complete with Galvanised steel earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers,necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing complete inclduing taking down old one as specified and as directed.

SHANTA DURGA TRADERS