Construction of 10,000 Litres capacity OHT at Panchal Village in Erukkandurai Village Panchayat, Valliyoor Panchayat Union.

Amount

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

For first depth of 2m

For Second depth of 1m

Supplying and filling with sand including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Supplying and filling with excavated earth including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

1.50m to 4.50m Below GL

Centering charges for RCC works including all cost and conveyance all materials to site etc., complete.

PLANE SURFACE:-

Below GL

Above GL (0.000 - +3.300m)

Above GL (+5.300 - +6.300m)

CURVED SURFACE:-

Above GL (0.000 - +3.300m)

SQUARE COLUMN:-

Below GL

Above GL (0.000 - +3.300m)

Above GL (+3.300 - +4.300m)

Above GL (+4.300 - +5.300m)

Above GL (+5.300 - +6.300m)

Supplying and fabrication of steel including all cost and conveyance and all labour charges for cutting, bending, tieing and placeing in position etc., complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.

1.50m to 4.50m Below GL

0m to 1.50m Below GL

Above GL (0.000 - +4.500m)

Above GL (+4.500 - +7.320m)

Above GL (+7.320 - +10.980m)

Plastering with CM 1:3 mix using to 10mm thick including all cost and conveyance of all materials and all labour charges etc., complete

Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Fabrication, Supply, delivery and fixing in position of outside M.S.ladder of 0.45m wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm c/c welded, jointed etc., providing with one coat of Red Oxide paint for providing access to Roof top with suitable inclined length, bottom anchorage and including transportation charges etc., complete.

Supplying and fixing of CI manhole frame and cover of size 0.60mx0.60mwith suitable 50x50x6mm MS angle fixed along edges etc., complete.

Supply and delivery of 5 HP submersible motor pump set (Three Phase) with duty condition of 100LPM against 175 head etc., complete.

Supply and delivery of Panel Board (Three Phase) for 5 HP Submersible motor pump set

Supply and delivery of 3core 4mm2 flat submersible cable

Supply and delivery of 40mm dia UPVC Pipe

MR.S MARTIN BABU, CONTRACTOR