SPECIAL REPAIR TO OR MD ACCN P-24, P-29 AND P-30 (BLOCK OF 08 QTRS) AT DUNDAHERA MIL STN UNDER GE (SOUTH) DELHI CANTT-10

Amount

Taking down chowkats or frame with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) including removal from site complete all as specified & directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each including removal from site complete all as specified & directed.

Taking down shutter of any description exceeding 1.0 Sqm but not exceeding 2 Sqm each including removal from site complete all as specified & directed.

S & F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, Filling hollow of frame with plain cement concrete 1:3:6 and painted with one shop coat of zinc chromate primer, and two coat of synthetic enamel paint complete all as specified & directed..

S & F 35 mm thick Factory made 2nd class hardwood plain, framed, paneled shutters(any number of panels) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces Size of rail and stile as per IS-1003(part) Kiln seasoned and chemically pressure treated complete all as specified & directed.

S & F 30 mm thick factory made 2nd class Hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive glass/gauge etc. divided into squares edges of framing Plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/gauge etc. Size of members of shutters complete all as specified & directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure wooden grain having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified, as shown on drawing and as directed. Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

S&F Factory made wood grain solid PVC moulded door with particle board core shutter 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick plain colour PVC sheet on front face & 2mm thick plain colour PVC sheet on back face, including hinges complete all as specified, as shown on drawing and as directed.

S & F stainless steel (304 grade) 200mm long barrel tower bolt of extruded section ,ISI marked complete all as specified & directed.

S & F stainless steel (304 grade) 150mm long handle complete all as specified & directed..

S & F in repairs stainless steel (304 grade) butt hinge 100mm size, complete all as specified and as directed.

S & F 250mm long stainless steel (304 grade), sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed etc. complete all as specified and directed.

S & F in repair for mild steel, 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed..

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 60mm complete all as specified & directed.

S & F in repair for mild steel hasp and staple 75 mm long complete all as specified & directed.

Labour for easing and adjusting of doors/windows without taking down shutter from frames for easy closing against floor/cills/changing the position of hinge etc. complete all as specified & directed.

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over & including a coat of wooden primer complete all as specified & directed.

S & F magic eye and fixed to doors complete all as specified & directed.

M&L for cutting openings for brick walls built in cement mortar or cement lime mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish to a distance not exc. 50m complete all as specified and directed.

M&L Sand filling under floors or in foundation including watering and well ramming layers etc. complete all as specified directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples including wooden beading, complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples including wooden beading, complete all as specified and directed.

S&F Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of red oxide primer, and two coat of synthetic enamel paint, complete all as specified and directed.

S&F Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of red oxide primer, and two coat of synthetic enamel paint, complete all as specified and directed.

S&F for Steel window or ventilator , fixed type, without glazing bars including one shop coat of red oxide primer, and two coat of synthetic enamel paint, complete all as specified and directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M & L for preparing new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over & including a coat of red oxide primer, complete all as specified and directed.

S & F 3mm thick Sheet glass ordinary quality & glazing with oil putty in square n.exc. 0.5 sqm in each pane Complete all as specified & directed.

S & F figured glass 3mm thick, pin head type and glazing with silicon based putty in square n exc. 0.50 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/spring clips wherever necessary, complete all as specified and directed.

M & L for Welding in repairs exc. 2.5cm but n.exc 5cm in length thickness of metal to be welded exc. 6mm but n.exc. 9mm complete all as specified and directed .

Dismantling of boarding, any description, fixed in any position with nails complete all as specified & directed..

M & L for 18 mm thick wood plastic composites (WPC) board, fixed with screws fitted under or above the kitchen cooking platform and/or other platform complete all as specified and directed. Note : (a) Pattern & design of WPC board to be decided by GE. (b) Cupboard knobs & Stainless Steel clip on hinges shall be measured & paid separately.

S & F Stainless Steel clip on hinges (Inset) complete all as specified and directed .

S & F 40/50mm dia, cup board knobs fixed with nut, screws and washers of aluminium, anodised complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M&L for Vitrified coloured ceramic tiles 10mm thick( square/rectangular)area of each tile exceeding 0.18 sqm but n exc. 0.38 sqm, as in floor over & including 15 mm thick in CM 1:6 , set and jointed in neat cement slurry pointed in white/coloured cement to match the shade of tiles complete all as specified & directed.

M&L for Vitrified coloured ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but n exc. 0.38 sqm, as in skirting/dado over & including 10 mm thick in CM 1:4 , set and jointed in neat cement slurry pointed in white/coloured cement to match the shade of tiles complete all as specified & directed.

M & L for Non-skid tiles 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.06 Sqm but n exc. 0.11 Sqm over & including screed bed or bedding layer of 15 mm thick in CM 1:6 , set & jointed in neat cement slurry and pointed in white cement with pigment to match the tiles as in floor complete all as specified and directed.

M & L for Glazed Ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and directed

Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons, skirting etc. laid bedded and pointed in any mortar complete all as specified and directed

M & L for Granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, cooking platforms, skirting with necessary hole for gas pipe where ever required and likes over & including bedding layer of 20mm thick in CM 1:6 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed. Note:- Granite on cooking platforms shall be provided in single piece)

M& L for Mirror polish Machine cut 18-20mm thick kota stone slab flooring as in treads of staircase over & including cement screed base 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified & directed.

M& L for Mirror polish Machine cut 18-20mm thick kota stone in riser of steps, skirting, dado and pillar, laid over & including cement screed of 10mm in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including, rubbing and polishing complete all as specified & directed..

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M & L for 75 mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection complete all as specified & directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition (Parapet wall) complete all as specified and directed.

M & L for reinforced cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in fins, fascias, louvers, parapets, and railings, newels, balustrade, and the like complete all as specified & directed.

S & F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc. cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete all as specified & directed.

S & F 8 mm dia TMT bars, cut to length bent to shape required including cranking bending spirally for hooping for columns, chajjas to parapets etc. hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified & directed.

M & L for use & waste of formwork, flat, fair finished, to faces of walls, retaining walls, butments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified & directed.

M & L for 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base/floor complete all as specified & directed..

M& L for 60mm thick, M-35 grade machine pressed precast rubber moulded colour concrete paver block in any shape and size as approved conforming to IS 15658-2006 including filling the joints with same matched coloured pigment complete as specified and as directed".

Taking down cement plaster of any description on brick/stone walls or concrete surfaces including racking out joints, hacking for key scrubbing down with water etc. on walls and ceiling, complete all as specified and directed.

M & L for 15mm thick rendering with ready mix plaster on brick /concrete of wall finished even and smooth without using extra cement, complete all as specified and directed.

M & L for 10mm thick rendering with ready mix plaster as in ceiling and finished even and smooth without using extra cement, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, pillars, ashlar facings, dressed stone work and precast articles etc. complete all as specified and directed.

M & L for brick work with sub class ‘B’ old sized bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified & directed..

M & L for brick work with sub class 'B' old sized bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M & L for preparation of surfaces and applying three coats of white wash on ceiling on newly plastered surfaces complete all as specified & directed..

M & L for preparation of newly plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M & L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion over & including one coat of wall care putty on whole surface to achieve smooth, even & uniform surface complete all as specified and directed .

M & L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified & directed.

M & L for complete removal of existing treatment , washing down and stopping and applying two coats of cement base paint over external surface of wall complete all as specified and directed .

M & L for complete removal of existing treatment , washing down and stopping and applying two coats of distemper oil emulsion, white or tinted over & including one coat of wall care putty on whole surface to achieve smooth, even & uniform surface complete all as specified and directed .

M & L for complete removal of existing treatment, washing down and stopping including preparation of old plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified & directed.

M & L for preparation of plastered or unplastered old decorated surfaces of ceiling by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of Paris etc. and applying one coat of white wash as in ceiling complete all as specified & directed.

M & L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint complete all as specified & directed.

M & L for preparing old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connection including cleaning or removal from the site of work complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connection including cleaning or removal from the site of work complete all as specified and directed.

S & F GI tubes, 15 mm bore, medium grade galvanised, with all fittings , fixed to walls and ceilings or laid floors or concealed, complete all as specified and directed .

S & F GI tubes, 20 mm bore, medium grade galvanised, with all fittings , fixed to walls and ceilings or laid floors or concealed, complete all as specified and directed .

M&L for cutting chases for concealed water tubing n.exc 10cm girth in brick wall complete and making good with cement mortar 1:3 all as specified and as directed.

Dismantling of water tanks of any type/pattern not exc. 500 ltr and removing from site of work, complete all as specified and directed.

M & L for rotational moulded polyethylene water storage tanks triple layer, 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

S & F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified & directed.

S & F in repair 15 mm angle valve / stop cock chromium plated, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed for both ends for iron or for unions complete all as specified & directed.

S & F in repair brass chromium plated shower rose of size 150 mm with arms including fixing to steel pipe complete all as specified & directed.

S & F in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420mm, bowl size 410mm x 330mm x160mm complete all as specified & directed.

S & F in repair stop valve cast copper alloy, screwed down both, high pressure, with crutch or butterfly handle, screwed both end for iron pipe or for unions and fixed, 20 mm internal bore complete all as specified & directed.

S & F in repair PVC low level white flushing cistern, valve less syphonic action type 10 ltr capacity with inlet, ball valve, float and handle including PVC flush pipe 32mm dia bend and a pair of mild steel iron brackets of suitable size including making necessary connection to water supply pip line and, complete all as specified and directed.

S & F in repair PVC connection for 15 mm bore pipe, 450mm long complete all as specified & directed.

S & F in repair bib taps long body 15mm bore, chromium plated cast copper alloy, with crutch or butterfly handle screwed both ends completed all as specified and directed.

S & F pillar taps 15 mm, cast copper alloy chromium plated with capstan heads, screwed down high pressure, screwed for iron pipe and fixed all as specified and directed.

S & F chromium plated grating with 100mm dia of approved make including fixing with cement to floor/nahani traps etc., complete all as specified and directed.

S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified & directed.

S & F in repair vitreous china wash hand basin white flat back, size 550 x 400mm excluding taps, waste coupling, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S & F 32 mm dia PVC waste coupling for Wash Hand Basin, complete all as specified and directed.

S & F 32 mm dia and 65 cm long PVC waste pipe for sink and wash basin, complete all as specified and directed .

S & F in repair vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, coloured, with integral foot rests, fixed in repairs including provision of lime concrete bedding complete Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.

S & F in repairs elegant mirror PVC cabinet without towel rail of size 450 x 350 mm complete all as specified & directed.

Dismantling up to 100/75mm bore cast iron pipe (soil/ waste/ vent) with fittings, jointed with cement or lead, from wall or floors including of all fittings such as tee, bend, branch pieces, complete all as specified and directed.

S & F cast iron (sand cast) soil, waste and vent pipe in any length with or without ears with cement joints, fixed to walls, 100mm bore, complete all as specified and directed.

S & F cast iron (sand cast) soil, waste and vent pipe in any length with or without ears with cement joints, laid in trenches or in floors, 100mm bore, complete all as specified and directed.

S & F cast iron (sand cast) soil, waste and vent pipe in any length with or without ears with cement joints, fixed to walls, 75mm bore, complete all as specified and directed.

S & F cast iron (sand cast) soil, waste and vent pipe in any length with or without ears with cement joints, laid in trenches or in floors, 75mm bore, complete all as specified and directed.

S & F Cast iron branch piece single (equal or unequal) ordinary or inverted, spigot or socket type or with parallel branches bore of pipe 100mm, complete all as specified and directed .

S & F Cast iron branch piece single (equal or unequal) ordinary or inverted, spigot or socket type or with parallel branches bore of pipe 75mm, complete all as specified and directed

S & F cast iron bends (any radius) of any description for bore of pipe 100mm jointed with polymer based jointed materials without oval access door, complete all as specified and directed .

S & F cast iron bends (any radius) of any description for bore of pipe 75mm jointed with polymer based jointed materials without oval access door, complete all as specified and directed .

S & F stack clamps for 100mm bore pipe made out of 50mm X 5mm flat iron and 16mm dia round iron stay including bolts and nuts and securing ends of stays to walls or roof, complete all as specified and directed.

S & F stack clamps for 75mm bore pipe made out of 50mm X 5mm flat iron and 16mm dia round iron stay including bolts and nuts and securing ends of stays to walls or roof, complete all as specified and directed.

Taking down eaves gutter rain water pipe (any size of pattern) including all fittings, heads, shoes, bends, swan-necks and cleaning or fixing or removal, complete all as specified and directed.

S & F PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S & F PVC (SWR) bends/shoe 110mm bore, any radius, complete all as specified and directed.

S & F tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges complete all as specified & directed.

S & F mild steel powder coated coloured fancy drapery curtain rod of 20 to 22mm dia including brackets & side Knobs complete all as specified & directed..

S & F 6 mm thick glass corner shelf fancy type with railing and fitting complete of size 25cm x 25 cm of best quality (as per sample approved by GE) complete all as specified & directed.

S & F in repair stainless still plate rack made of 1.00 mm thick stainless steel sheet of size 750 mm x 750 mm x 210mm consisting of three shelf for bowls and one shelf for keeping six Nos. of big utensil and seven Nos. of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre complete all as specified and directed .

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified & directed.

Demolition of lime/concrete of sunken floors exc. 15 cm thickness (below or above ground level ) including WC complete all as specified and directed.

M & L for 25 mm thick PCC 1:2:4 using 20 mm graded stone aggregate over 250 mm thick cement concrete type E2 ( 1:5:10 ) with 40mm brick bats as in filling of sunken floors over a layer of polyethylene film black 50 micron over a layer of bitumen blown any grade applied hot (1.5 Kg/sqm) over 10mm thick plaster in CM 1:3 with WPC @2% by wt. of cement including treatment to side wall of sunken complete all as specified & directed. Note:- Over all floor area only be measured for payment, rate for side wall deemed to be included.

Dismantling of bricks tiles (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) on roof surfaces complete all as specified & directed.

Demolition of mud in roof, any thickness, including plastering and leeping complete(whether full thickness removed or only a part there of) and removing rubbish outside MoD land complete all as specified and directed .

M & L for roof treatment comprising of following stages, complete all as specified and directed:- (i) Preparation of concrete surfaces by wire brush and cleaned top surfaces of cement concrete . (ii) PCC type B-0, 1:2:4 (12.5mm graded stone aggregate) to maintain slope with average thickness of 40mm as in roof padding. (iii) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 Kg per sqm including cleaning surfaces (iv) APP polymeric water proofing membrane minimum 3 mm thick and weighing not less than 3.0 Kg per Sqm , black finish reinforced with non woven polyester matt (wt. not less than 150 gms/sqm)with a thermo fusible finish laid over bitumen primer @ 0.5Kg/Sqm by torch application with a propane or a butane gas torch with an overlap of 100mm at the sides and 150mm at the ends, as per manufacturers instructions (Manufacturer as approved by GE). Note:- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectiveness of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractor's payment for a period of 10 Years reckoned from date of physical completion of this work, or in lieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory of 10 years period.

M&L for guniting of spalled/corroded reinforced cement concrete surface i.e. column, beam, slab, chajja, comprising of chipping of spalled and loose concrete as follows:- (i) Cleaning rust form reinforcement by sand blasting, scrubbing down concrete surface with wire brushes , cleaning with water, allowed to dry, and applying a layer of anti rust chemical on all exposed reinforcement followed by a coat of corrosion inhibitor on all exposed surface of reinforcement. (ii) Applying a coat of bond coat of approved epoxy adhesive on all exposed surface of concrete to be gunited. (iii) Applying two layers of guniting over & including steel welded wire mesh having 5mm dia of wire mesh and aperture 50mm, total thickness of gunite not exc. 60mm thick (average thickness using cement mortar 1:2 using OPC 43 grade, duly mixed with polycretee admixture @2% by weight of cement or as per manufactures instructions. (iv) Applying 5 mm thick ready mix plaster over gunite surface finished fair and smooth conforming to proper geometrics to match the existing surface as is in side and soffits of slabs, chajjas, fins, fascias, parapet, lintels, columns and beams with and including necessary scaffolding, shuttering, chases to brick work or RCC member etc., complete all as specified and directed. Note : GI wire mesh shall be insert into RCC member by doing hole then inject epoxy injectable mortar into the hole before guniting.

M & L for cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, and cut and polished laid over & including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M & L for Providing and injecting chemical chloropyriphos emulsifiable concentrate for Post Constructional Anti termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & directed.

M & L for Anti termite Treatment of soil under existing floors using chemical chloropyriphos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors all as specified .

M & L for 15mm thick rendering with Ready Mix Plaster on brick or conc surfaces finished even and smooth without using extra cement mixed with by adding permeability reducing polymer @ 400gm/sqm at time of mixing with water as per manufacturer's recommendations including all leveling the surface, curing etc. complete.

M & L for providing and applying a bond coat of Latex:Water:cement - 1:4:8 with Latex consumption @100gm/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing complete.

M&L for following operations:- (i)Expose the first joint of masonry structure at ground level horizontally. The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. (ii) Drilling Holes: Drilling holes 10mm diameter in masonry structure along the side of the joint at 45° angle so as to cross the brick/block at the intervals spacing of 15-30 cm depending on extent of rising dampness, (iii) Cleaning of holes: Clean the holes by air blower prior to fixing nozzles. (iv) Install Packer injection packers 9.8mm diameter, 10cm long in the holes and tighten. Fix the packer securely using solvent free, moisture tolerant thyrotrophic, two part structural adhesive and repair mortar based on epoxy resins and special fillers. (v) Cutting of Packers: Cut the packers after completion of grouting without damaging structural elements.

M&L for a 3 part, very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time having Mixed viscosity : 3-11 Mpa at +20 Deg C, Reaction time : adjustable according to ambient temperature and execution requirement between 8-50 mins, pH – 9-10, Tested as per Wissbau No. 2002-094-(1A) – Function test with re-injectable hose system. Pump Injection-306 at >20 bar into or behind fissures or into masonry joint which are allowing water to infiltrate into unwanted areas. If voids in masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout. When movement stops or elastic polyacrylic injection resin appears at the next packer move to the next packer and inject complete all as specified & directed.

Taking down carefully the old u/s Aluminium/ Copper point wiring (light, fan, socket or power) complete with conduit & fittings such as light fitting, switches, ceiling roses, pendants, sockets, regulators, call bell etc. and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area i.e. with OBD/colour wash/white wash as the existing finish complete all as specified & directed.

M & L for point wiring concealed type with 1.5 sqmm nominal area, single core,1100 Volts grade, multi standard, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PV insulated unsheathed, FRLS copper conductor cable connected to common earth and earth dolly in and including rigid non-metallic PVC conduit with accessories and including Modular sunken pressed steel terminal box 2mm thick of required size including modular plate and modular flush box in different module with all accessories complete all as specified & directed for following :- Note: 1.The rate is inclusive of cutting/chasing and making good the disturbed surface with CM 1:3 and the same surface finishes with the adjoining surface of disturbed area . 2.In case of wiring encountered with ceiling or column the wiring will run on surface.

One light/fan/Bell point controlled by 01 one way switch

One light point controlled by two 2-way switch

One 3 pin socket outlet 5 amps on independent board

One 3 pin socket outlet 5 amps point on same board

M & L for point wiring concealed type with 4 sqmm nominal area, single core,1100 Volts grade, multi standard, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 4 sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PV insulated unsheathed, FRLS copper conductor cable connected to common earth and earth dolly in and including rigid non-metallic PVC conduit with accessories and including Modular sunken pressed steel terminal box 2mm thick required size including modular plate and modular flush box in different module with all accessories complete all as specified & directed for following :- Note: 1.The rate is inclusive of cutting/chasing and making good the disturbed surface with CM 1:3 and the same surface finishes with the adjoining surface of disturbed area . 2.In case of wiring encountered with ceiling or column the wiring will run on surface.

S & F bell push, modular type 5 Amps all as specified and directed. Make- Crabtree of Havells/Penta of Anchor/ Myrius of Legrand

S & F electric bell (Dingdong) AC, 230 volts single phase complete all as specified & directed. Make- Crabtree of Havells/Penta of Anchor/ Myrius of Legrand

S & F switch modular type 5 Amps single pole one way, ISI marked complete all as specified & directed. Make- Crabtree of Havells/Penta of Anchor/ Myrius of Legrand

S & F switch modular type 5 Amp single pole two way ISI marked complete all as specified & directed. Make- Crabtree of Havells/Penta of Anchor/ Myrius of Legrand

S & F socket modular type 5 pin single pole one way, ISI marked complete all as specified & directed. Make- Crabtree of Havells/Penta of Anchor/ Myrius of Legrand

S & F switch modular type 15 Amps single pole one way, ISI marked complete all as specified & directed. Make- Crabtree of Havells/Penta of Anchor/ Myrius of Legrand

S & F socket modular type 6 pin single pole one way, ISI marked complete all as specified & directed. Make- Crabtree of Havells/Penta of Anchor/ Myrius of Legrand

S & F ceiling rose surface Bakelite 60x 25 mm two to three terminals, ISI marked complete all as specified & directed.

S & F for Batten holder with PVC body and back plate suitable for LED Bulb B-22 cap. complete all as specified & directed.

S & F LED Integrated Batten T5 20 Watt 4 Feet White, indoor decorative PVC extruded T5 LED batten -integrated type complete with including flexible wire complete all as specified & directed.

S & F for wall mounting fitting Decorative wall light fixture in durable plastic body, suitable for 09 W LED retrofit Lamp (B-22 base) complete all as specified and directed.

S & F LED Integrated Batten T5 LED tube light fitting of 10 Watt - 2' white, indoor decorative aluminium extruded T5 LED batten integrated type complete with including flexible wire complete all as specified & directed.

S & F LED Integrated Batten aesthetically designed linear mirror LED light fitting of 05 Watt 1 feet long white, indoor decorative aluminium extruded provided with a high output PMMA diffuser for glare free light LED batten integrated type including flexible wire complete all as specified & directed.

S & F Bulkhead LED 10W, Bulk head in die cast aluminium housing & frosted glass including all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete all as specified & directed.

S & F LED RETROFIT LAMP of 09 Watt LED lamp for wall mounting fitting, Holder & Bulkhead complete all as specified & directed.

S & F LED Security light fitting 45 Watt Highly efficient made of pressure die cast aluminium housing with heat resistance toughened glass including fixing material i.e. MS clamp, Nut and bolt, anchor fastener washer etc. complete all as specified & directed.

S & F in replacement of vertical distribution board triple pole and neutral 4 way for fixing MCCB up to 100 Amps as incomer and MCBs as out goings with metal door and IP 43 Protections and connecting complete all as specified & directed.

S & F MCCB 63 Amp, 415V, 3P with 16 KA complete all as specified & directed.

S & F in replacement of MCB DB SPN 12 Way double door type, (IP 43 Protection) flush mounting for MCBs complete all as specified & directed.

S & F MCB SPN 40 AMP 'B' curve complete all as specified & directed.

S & F MCB SP 6 to 32 AMP 'B' curve complete all as specified & directed.

M & L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm, 1100 Volts grade in & including PVC Conduit 25mm medium grade complete with conduit accessories and copper cable 6 sqmm continuous earth wire as in replacement complete all as specified and directed Note:- (i) Two runs of cable 6sqmm with 01 earth wire 6 sqmm & conduit shall be measured as one unit. (ii) The unit rate quoted is inclusive of taking down old sub main wiring, making good the disturbed surface and same surface finishes with the adjoining surface of disturbed area .

Taking down of Old serviceable/unserviceable ceiling fan/exhaust fan and deposited to MES Store yard complete all as specified and directed .

Refixing only exhaust fan including provision of new nuts and fastener and necessary electrical connection complete all as specified and directed.

S & F Ceiling Fan 1200 mm sweep of color White complete with blades, down rods, electronic regulator and accessories, 230 V. Min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified & directed..

Taking down and refixing of any type / any make of electric meter after repair / replacement on completion of special repair work including repair/ replacement of all required parts and fixing at the same position with lugs & thimbles upto capacity of 40 Amps, single phase, 50 Hz KWh meters including sealing material complete all as specified and directed. Note: Contractor will ensure that meter is working accurately to the satisfaction of Engr-in-Charge.

M & L for Earthing in replacement complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as per electrical plate No. 03 and connected to earth test point including testing on completion and complete all as specified & directed.

SHAKSHI ENTERPRISES

P R Constructions

Chaudhary Constructions

BEHAL TRADERS

M/S Parshant Associates

YP INFRA

Shivom Projects Private limited

M/S Rohit Enterprises

M/s KUMAR BUILDERS