Guindy park elec

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point (for electronic regulator) ( 4 points / Coil)

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point (for electronic regulator) ( 5 points / Coil)

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box in flush with wall with 6A 2 way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Staircase Light point

Wiring with 2 x4 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with suitable Module GI switch box in flush wall with 1 no. 16A one way module switch and 1 no. 16A/6A 3 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 4 sq.mm copper wire for Open MS conduit 15A Plug point ( 8 points / Coil)

Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting

Supply and Fixing of 2 x 22W 4 Feet LED Fitting with 2 X 20W LED Tube Light with TW Round block on wall with PVC unsheathed copper leads from terminals to the Fittings.(Higher End)

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb

Supply and Fixing of 2' 10W Havells LUMILINEBS10WLED865SPCWHLED Light on Wall or Ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Havells/Equivalent)

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.

Supply and Fixing of Philips make 38W Green Space LED surface mounted Fitting on Ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells/Equivalent)

supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod on existing fan clamp)

Supply and fixing of Fan Cross Clamp for the ceiling fan with Material charges for heavy gauge Cross arm with Necessary 4" bolts and Nuts and fixing the Fan Clamp with necessary alignment.

Supply and fixing of 300mm (12") sweep (lightduty) AC exhaust fan complete without provision of hole in the wall with necessary suitable connection.

Supply and fixing of AC/DC 76mm buzzer/call bell suitable for 230volts 50c/s single phase AC supply on suitable TW board with push switch

Supply and fixing of 3 nos.6A two module 3 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 2 nos.6/16A two module socket , 2 nos. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 1 no.6A two module 3 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Supply and fixing of 63A FP MCB with FP Sheet steel Enclosure on wall with suitable necessary connection. Higher End

Supply and fixing of 63A FP Change Over MCB with suitable FP sheet steel Enclosure on wall with suitable necessary connection. Higher End

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 1.5 sq mm copper wire with painting of suitable colour.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 2.5 sq mm copper wire with painting of suitable colour.

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour

Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 6 sq mm copper wire with painting of suitable colour

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 10 sq mm copper wire with painting of suitable colour..

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of three phase seven segment type 4 way 63A distribution board with metal door cover code IP42 protection , with 63A 4 pole MCB as incoming and Sub incomers 3 nos 25A 30mA DP ELCB and 12 Nos 6A-32A SP MCB as outgoing with suitable AI frame on wall with cable entry boxes with earth connection only. The MCB DB and MCB’s should be with ISI mark. Higher End

Supply and fixing of three phase seven segment type 6 way 63A distribution board with metal door cover code IP42 protection, with 63A 4 pole MCB as incoming and Sub incomers 3 Nos 40A DP 30mA ELCB and 18 Nos 6A-32A SP MCB as outgoing with suitable AI frame on wall with cable entry boxes with earth connection only. The MCB DB and MCB’s should be with ISI mark. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and laying of 3 1/2 x 185 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and laying of 2 x 16 sq.mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and fixing of brass cable gland for 3-1/2 x 185 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 2 x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and providing cable end termination of 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and providing cable end termination of 3-1/2 x 185 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of 250A capacity dust and proof cubical panel board of size 7’ ft x 5’ ft x 2’ ft CRCA 16 SWG sheet for outer body and stiffness and doors switches supports respectively and with supply and fixing of the following cubical mounting switches with centre Vertical bus bar chamber and vertical covers, and cable chamber on both side of the buss bar chamber at the extreme ends on both side and confirming in I.S specifications. (Incomer) 1)250A 4pole MCCB-2Nos -2 Nos with interlocking arrangements of only one incommer on at any given time by means of one key two switching operation. (Outgoings) 2)63A TPN MCCB-10 Nos A Separate chamber on Top of one side should be built with (0-500 V) Voltmeter (0-250A) Ammeter with

The panel should be powder coat painting Siemens grey complete with LED Digital Display for VAF Meter chamber. The cable size, capacity of switch and location should be marked with white paint .(L&T/Siemens) @ Grnd floor

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

Supply, erection ,testing and commissioning of 15 KVA Numeric make online 3 phase in & 1 phase out UPS system 2HOURS BACK UPfor the following configuration 1) True ON LINE –UPS SYSTEMS with Pulse width modulation(PWM) Technology using IGBT Inverter. 2) INPUT VOLTAGE RANGE : 410 V 3)OUTPUT VOLTAGE : 380-410 V ± 1% 4)DC Volt:120V 5)INPUT FREQUENCY : 50Hz ± 5% 6)Out put Frequency: 50Hz ± 2% 7) Out put Waveform:Pure Sine Wave 8) LOAD POWER FACTOR : 0.8 to Unity 9)HarmonicDistoration: Less than 5% 10)Over Load: : 125% for 10Minutes11)Inverter Operation : PWM-IGBT 11)Inverter Operation : PWM-IGBT

12)Invertor Efficience : Better Than 90% 13)OPERATING TEMPERATURE : 0 to 50 Degrees centigrade’s on Full Load14)Digital Panel Meter : To Read output A/C Volts,Output D/C Volts Frequency 15)By pass : Manual 16)PROTECTION (INBUILT) a. Output Under Voltage b. Output Over Voltage c. Output Overload d. Output Short Circuit e. HRC Fuses, Output & Battery f. Battery Low trip

g. Battery Charging Current Limit. 17)INDICATIONS : 1. Mains On, 2. Inverter On, 3. Load on U.P.S. 4. Battery Low 5.Over load 6.Inverter Trip. The 15 KVA UPS system 3 phase input and Three phase output and as per the detaied specification enclosed, Sealed Maintenance free batteries to suppory 15 KVA for 2Hrs complete with intercell connectors & copper cables, battery stand made out of powder coated MS Angles with adeguate support to carry the load of the batteries. The vendor shall submit dimensional GA drawing of complete UPS/ Inverter system battery rack with batteries, Service panel and battery bank calculation.

Supply and providing of Plate Earth electrode with 3mts of Class ' B ' GI pipe 40 mm and 3mm thick of copper plate of size 24" x 24" x 3 mm riveted to the pipe at one end and providing a funnel at the top end with 2runs of 25mm x 3mm copper flat from the copper plate to the top of the electrode and embedding the above electrode in a pit to be excavated at a depth of 3mt and of size 60cm x 60cm and filling up the pit with charcoal, salt, sand.

Supply and Installation of copper air terminal spike arrestor with base and all fittings and stand.

Supply and installation of 70 sqmm copper cable run on the external wall from terrace to the ground floor in PVC 1” conduit.

Supply ,Erection,Testing and commissioning of 2.0TR split type Air conditioner 3 star rated with one outdoor air cooled condensing unit and indoor evaporator with inter connection of copper refrigerant piping between condensing unit and evaporator unit electrical cabling of performing cooling ,dehumidifying air circulating filtering etc.. suitable for operation on 230V 50Hz single phase.

Supply ,Erection,Testing and commissioning of 1.5TR split type Air conditioner 3 star rated with one outdoor air cooled condensing unit and indoor evaporator with inter connection of copper refrigerant piping between condensing unit and evaporator unit electrical cabling of performing cooling ,dehumidifying air circulating filtering etc.. suitable for operation on 230V 50Hz single phase.

Supply and fixing of 5KVA wall mounting type Automatic voltage stabilizer with time delay arrangements suitable for operation at 230 Volt, 50 Hz, AC power supply

Supply and fixing of 4KVA wall mounting type Automatic voltage stabilizer with time delay arrangements suitable for operation at 230 Volt, 50 Hz, AC power supply

Supply and laying of 5/8" and 3/8 copper pipe with necessary insulation, Cabling arrangement etc…

Supply and fixing of angle iron stand for outdoor Unit.

Supply and fixing of 1 inch PVC water drain pipe line on wall with suitable Clamp as required.

Towards charges for Core Cutting for 2 feet walls, wall opening for fixing ac units

Supply and fixing of 1000W automatic electric water heater of 25litres capacity suitable for 230V 50c/s AC supply on suitable MS clamps with 3 core flex wire,but without plumbing work.

Supply and fixing od UPVC cable management size of 50 X 80 mm with end cap and cover joint in necessary connection

Supply and fixing od UPVC cable management size of 100 X 50 mm with with end cap and cover joint in necessary connection

Supply and fixing of 0.7mx Height 1Mt x Width 0.75mt floor mounting type Pillar Box made up of 16SWG CRCA sheet steel with one coat of primer and two coats of painting in suitable masonry pedestal and AI frame work with one no Danger board and earth connection and necessary identification of danger letter in BOLD and connecting with 4 Nos 2"x1/4" copper flat for RYBN for the outgoing loads with necessary Identifcation stcikers, safety danger board.

Supply and erection of G.I. Stepped tubular pole of 8 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 114.30mm OD x 5.40mm Thick x 4500mm Length, 88.90mm OD x 4.85mm Thick x 1750mm Length, 76.10mm OD x3.25mm Thick x 1750mm Length, with single arm ornamental bracket of outer dia 50 mm pipe bent suitably to give a height of 1.5 mtr and overhang welded suitably with ornamental bracket and fixed rigidly with 8 Nos of bolt and nuts to prevent any turning movement of bracket due to wind with sheet moulded compound (SMC) junction box IP 42 protection of size (295mm x 225 mm x 120mm) , fire proof of suitable size with 4 way terminal block with hylem sheet of size (250mm x 200mm x 6mm) with 1 No. 16 A fuse unit with 1 No. suitable links provided at a height of 2.0 mtr from the ground level with embossing of metalic

"DANGER 440 V" with earth connection with earth bolts of size 8mmx25mm welded on the pole at one end with 4 mtr of 40 mm PVC pipe for incoming and outgoing cable. The pole shall be provided for coil earth with No. 8

for coil earth with No. 8 SWG GI wire of 11.5 mtr of length in which 10 mtrs of total length compressed in to a coil of one meter length. The pole shall be painted with one coat of red oxide primer paint and two coats of aluminium paint of reputed make to the length of pole with supply and fixing of 150W LED street light Higher end with necessary connection wire from junction box to the fittings with 3 x 1.5 sq mm PVC copper wire for each fitting with pole earthing with necessary connections testing and commissioning as per the specification. The pole should be mounted on the special type of bracket which would be fixed on the side of the crash barrier and the details are as follows The bracket should be fabricated like diagnal cut of the cubic structure with 25 mm thick plate of size

The bracket should be fabricated like diagnal cut of the cubic structure with 25 mm thick plate of size 425x400x25mm with 8mm thick stiffner plate for side support and providing 8 Nos 25 mm hole for fixing the bracket on wall with special flange on the other side of barrier, with necessary M14 and M16 bolt with spring washers, nuts etc.,

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (For RMG Room Lights and Street Light Cable)

Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for the 4x16 sqmm PVC Armoured LTUG cable with earth connection.

Supply and providing cable end termination of 4x16 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Please Enable Macros to View BoQ information