REPAIRS TO JOINERY AND PLUMBING, SUNKAN FLOORING AND

Amount

Taking down steel tubing or removing from site of 15mm bore pipe all as specified and directed by Engineer-in-charge.

All as above item no.1 but 20mm bore.

Demolition of brick work built in CM incl all quoins, pillars etc but excl ashlar facings, dressed stone work and precast concrete

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. raking out joints ,hacking for key and scrubbing down with water upto 4 storeys building complete all as specified.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on Bk surfaces on fair face of brick work and finished even and smooth w/o using extra cement complete all as specified.

M&L for 10 mm thick cement plaster in cement mortar 1:3 on concrete or brick surface and finished even and smooth w/o using extra cement as in ceiling complete all as specified and directed

M&L for preparation of new surface and applying two coats of white wash on ceiling all as specified and directed.

M&L for preparation of new surface and applying two coats of distemper on wall including 3 mm wall care putty complete all as specified and directed.

M&L brick work with old size sub class B brick straight or curved on plan exc 6 m mean radius in half brick thick wall built in cement mortar in CM 1:4 complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

All as per item no10 bove but 20mm bore

S&F in repairs long body bib taps, cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15mm bore.

S&F in repairs angle valve ,stop valve, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore.

S&F in repairs pillar tap, fancy type,cast copper alloy, chromium plated, with capston heads screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts, screwed for 15mm bore pipe

M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors/wall etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over including 15 mm thick screed bead in CM 1:4, including dismantling of tiles complete all as specified and directed by Engr-in-Charge. Note : Debris removed from site outside of MOD land

M & L for Glazed ceramic coloured tiles of size 350x 250x 7mm/ 450X 350X 7 thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles and including 10 mm thick backing coat in CM (1:4) including dismantling of tiles complete all as specified and directed by Engr-in-Charge. Note : Debris removed from site upto outside of MOD land

M&L for vitrified coloured ceramic tiles, 10mm thick (Square/rectangular) area of each tile n.exceeding 0.36 sqm in floors/wall etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over 15 mm thick screed bead in CM 1:4, and including dismantling of tiles complete all as specified and directed by Engr-in-Charge. Note : Debris removed from site upto outside of MOD land

All as per item no.17 above but as in skirting/ dado etc with and including 10mm thick backing coat in cement mortar 1:4 an wall and including dismantling of tiles complete all as specified and as directed.Note : Debris removed from site upto outside of MOD land

M&L for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of stone slab complete all as specified and directed by Engr-in-charge.Note : Debris removed from site upto outside of MOD land

S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete..

S&F in repairs vitreous china wash hand basin of size 550mm x 400mm white, flat back including angle iron brackets with two coats of synthetic enamel paints including PVC waste pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts, and 32mm dia brass waste fitting complete all as specified.

S&F in repair vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, ‘P’ trap 110mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge.

S&F in repairs viterious china wash down water closet pan (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe)incl P or S trap etc all as specified.

S&F in repair PVC flushing cistern of 10 ltr capacity valveless, symphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including flush pipe of 32mm bore PVC and connection to pipes etc and taking down existing flushing cistern complete all as specified and as directed by Engineer-in-Charge.

S&F of plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete

S&F in repair 32mm bore PTMT waste coupling fixed to waste pipe and wash hand basin complete all as specified and as directed by Engineer-in-Charge.

S&F for 15mm bore PVC connection 450mm long with brass nuts on both ends complete all as spd

S&F in repair chromium plated shower rose 125mm size with or without swivel joint and fixed for 15mm bore pipe.

S&F in repairs steel Grating doom 125 mm dia with waste hole or without hole complete all as specified and directed by EIC

S&F in repair 100mm bore PTMT sink waste coupling fixed to waste pipe and wash hand basin complete all as specified and as directed by Engineer-in-Charge.

M&L in replacement of PVC waste pipe 75mm long, 32/40 mm bore complete all as specified

S & F in repair PTMT long body bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe and fixed

M&L for prepration of old plastered or unplastered surfaces of walls and applying one coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks with putty,complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of ceiling including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and one coat of white wash on ceiling complete all as specified and directed.

M&L for prepation of old painted wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Taking down frame or Chowkhats with shutters (without taking off shutters from the frames) of any description not exc. 1.50 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Taking down frame or Chowkhats with shutters (without taking off shutters from the frames) of any description exc. 1.50 Sqm not exc. 4.0 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Taking down Door shutter of any description exc. 1.0 Sqm but n exc 2.0 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete as specified and as directed.

S & F for 35 mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F for size 105x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, hold fast, lock strike plate, etc., complete as specified,complete all as specified and directed by Engr In Charge.

S&F for size 125 x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, hold fast, lock strike plate, etc. complete all as specified and directed by Engr In Charge.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide/ zinc chromate. complete all as specified and directed by Engr In Charge.

M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, complete all as specified.

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, complete all as specified and directed by Engr -in-Charge

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F 100 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F aluminum alloy handles fabricated anodised of 150 mm long complete all as specified and directed. .

S&F aluminum alloy handles fabricated anodised of 100 mm long complete all as specified and directed. .

S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed

S & F galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

Supply and fixing windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mmx12mm flat iron with 10mm square bar M.S. grill and all fitting, fixtures accessories complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series), complete all as specified and direted by Engr-in-Charge. Note : (i) Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grill as per Note above mentioned drawing deemed to be inclusive in the rate quoted for unit. (ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacture of window only. (iii) Including 2 coats of synthetic enamel paint over a coat of red oxide complete.

Demolition of cement concrete in sunken portion in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge. Note : Debris removed from site upto outside of MOD land

M&L for providing and making fillet of cement concrete in 1:2:4 in sunken portion to maintain the slope towards the spout including applying the under mentioned course of sunkan treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply two coats of acrylic polymer modified elastomeric water proofing coating (mixture of liquid plymer component and a cementitous powder) as per manufacturers instruction to bottom and vertical sides up to finished floor level + 100mm height , the thicknes of each layer shall be 1 mm . when the second lyaer is still, sticky, coarse sand spray shall be carrried for the vertical and bottom surface. Plaster the bottom and sides up to bottom of the sunken slab portion with minimum 10mm thick cement mortar 1 : 4 mixed with integral water proofing compound as per manufacturers specifications including rounding of corners and junctions slopping towards spout. Note:- This treatement shall be done by the approved authorized applicators and guarantee of treatement shall be minimum 10 years complete all as specified and directed by Engr In Charge.

Refilling PCC 1:5:10 type E2 using 40mm stone aggregate, 300mm thick in the sunken with the help of proper tools & equipments & plants complete all as specified and as directed by Engineer-in-Charge.

Providing and making cement concrete in 40mm thickness in 1:2:4 type B0 (12.5mm graded aggregate) including mixing of Dr Fixit Pidiproof LW+. Complete in sunken upto the below level of tiling complete all as specified and as directed by Engineer-in-Charge.

Spply and fix 40mm dia GI pipe as spout in sunkan floors, medium grade etc complete all as specified and as directed.

Dismantling existing tanks capacity exc. 250 ltr but n.exc 500 ltr,and removing.

S&F rotational moulded vertical water storage tanks triple layers with closed tops ( cylinderical ) fix hoisted and in position 500 ltr capacity incl disconnecting and refixing the existing GI fitting and pipe complete

S&F of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified.

Taking down of old /unserviceable kitchen cabinet / Cupboard incl all fixture and fittings. Note :- For measurement superficial area in elevation will be measured only.

S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet and cupboards shutter and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.

S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.

S&F factory made 5mm thik PVC sheet of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 5mm thick PVC sheet paneling for back side(wall side) and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing.

S&F continous piano hinges, mild steel, bright finish or electrogalvanised of width of flap 30mm

M &L for 50 mm magnetic catches and fixed complete all as specified and directed by Engr-in- Charge.

S&F 100mm Hasp and staple, safety type, with mild steel hinges pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr In Charge.

S&F 100 mm size Stainless Steel handle complete all as specified and as directed by Engr -in - Charge.

S & F in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified.

S & F in repair 25 mm dia anodised aluminium alloy with powder coated curtain rod including all necessary fixing arrangement like clamps, end brackets, end to end bracket and eight nos rings per meter complete all as specified and directed by Engr In Charge.

Welding in repairs not exceeding 2.5 cm in length thickness of metal to be welded exceeding 6 mm but not exceeding 9 mm. Note Rate including taking down steel window or door chowkhat , ventilator frame and welded with Angel iron /MS Flat as required length and refix the same and making good disturbed area all as specified and directed by Engr-in Charge

S&F for 35mm thick factory made 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F in repairs150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F in repairs 100 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F in repairs aluminum alloy handles fabricated anodised of 150 mm long complete all as specified and directed. .

S&F in repairs aluminum alloy handles fabricated anodised of 100 mm long complete all as specified and directed. .

S&F in repairs aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed

S & Fin repairs galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

M&L Pre polished kota stone slab 20 mm(+-2mm) thick in tread of steps, and similar over cement screed 20 mm thick in cm 1;4 base laid and jointed with grey slurry mixed with pigment to match the shade of slab laid over and including 20mm thick screed bed in cement mortar 1:4 including rubbing, grinding and polishing including dismantling complete all as specified and directed by Engr In Charge. Debris removed from site upto 20 Km outside of MOD land

All as item no.82 above but riser on stair case, skirting on walls etc incl the surface with . jointed with grey slurry mixed with pigment to match the shade of slab laid over and including 10mm thick rendering in cement mortar 1:4, rubbing, grinding and polishing including dismantling complete all as specified and directed by Engr In Charge. Debris removed from site upto outside of MOD land.

Ashish Sehgal and Co.

Rishi Constructions

SM CONSTRUCTION COMPANY

GIR RAJ BUILDERS

High Tech Metal India

OMVIN ENTERPRISES LLP

Mahesh Enterprises