Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-Finance | L1 | Accepted-Finance Valid documents received and accepted. | |
| 2 | L2₹34.2 L+₹2.6 L (8.10%)Accepted-Finance | L2 | Accepted-Finance Valid documents received and accepted. | |
| 3 | L3₹34.8 L+₹3.2 L (10.0%)Accepted-Finance | L3 | Accepted-Finance Valid documents received and accepted. | |
| 4 | L4₹36.2 L+₹4.6 L (14.5%)Accepted-Finance | L4 | Accepted-Finance Valid documents received and accepted. |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
10 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AFA),HYDERABAD
GE(AFA),HYDERABAD, DUNDIGAL
COMPREHENSIVE B/R AND E/M REPAIRS TO MES INSTALLATIONS AT VARIOUS LOCATIONS AND REPAIRS MAINTENANCE OF CERTAIN TEMPORARY BUILDINGS IN TECH AREA AFA HYDERABAD
2024_MES_635963_1
8390/E8
Open Tender
Civil Works
Item Rate
270 days
GE(AFA)
As per tender Documents
5 documents required · 5 mandatory
₹500
GE(AFA),HYDERABAD
₹80,000
13 Feb 2024
5 Jan 2024
12 Feb 2024
5 Jan 2024
10 Feb 2024
20 Jan 2024
5 Jan 2024 - 19 Jan 2024
Amount
Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable material to store and rubbish off the premises complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified
M&L for glazed ceramic coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:4) complete all as specified.
Taking down shutters n.exc 1 sqm each complete all as directed.
Taking down shutters exc 1 sqm but n.exc 2 sqm each complete all as directed.
Taking down chowkhats or frames with shutters without taking off shutters from frame n.exc 1.5 Sqm each complete all as directed.
Taking down chowkats or frames with shutters exc 1.5 sqm but n exc 4 sqm each of any description (without taking off shutters from the frame) complete all as directed
S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as directed
S & F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as directed.
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as per specified and as directed by Engineer-in-Charge.
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making openabled/sliding/fixed for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket and necessary Builder hardwares required for functioning etc, with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make , fixing with dash fasteners of required dia and size, including necessary fittings, stays, locking arrangement, rooler etc filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as per specified and as directed by Engineer-in-Charge. (Note-weight of aluminiun material will be considered for payment purposed.)
S & F 12mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination in aluminium doors/partition complete all as specified and directed
S & F for 5.50 mm thick sheet glass, ordinary quality and glazing in aluminium door frames with beading not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as directed.
S&F extruded aluminum alloy handle fabricated type anodized 150mm long complete all as directed..
S&F Aluminum anodized barrel bolt of extruded section 150mm long complete all as directed.
S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as directed.
Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane complete all as directed.
Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane.complete all as directed.
Supply and fix in repairs plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip/glass putty in aluminum window/ms windows shutter not exc 0.5 Sqm in each pane.complete all as directed.
S & F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.complete all as directed.
S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
M&L preparing old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed.
Dismantling of cast iron/PVC pipe any dia and any shape incl bends/branch pieces jointed in cement mortar and taking out if reqd.complete all as directed.
S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.
S&F for 110mm dia PVC (SWR) bends any radius complete all as specified.
S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified.
S&F for 110mm dia PVC (SWR) branch piece single (Single T ) equal or unequal complete all as specified.
S&F for 110mm dia PVC (SWR) vent cowl complete all as specified.
S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.
S&F for 75 mm dia PVC (SWR) grade bends of any radius
S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius
S&F PVC (SWR) branch piece, single (SingleT ) of radius equal or unequal, 75mm dia.
S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia.
S&F PVC (SWR) vent cowl, 75mm dia.
M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified.
S&F in repairs vitreous china wash hand basin white flate back of size 550x 400 mm with peatestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete.
S&F for 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with long screwed shanks and fly nuts etc all as specified.
S&F for 15mm dia CP bib taps long body with flange cast copper alloy fancy type with capstan head screwed for iron pipe or for brass ferrule etc all as specified and as directed.
S&F for 15mm dia CP two way bib taps long body with flange cast copper alloy fancy type with capstan head screwed for iron pipe or for brass ferrule etc all as specified and as directed.
S&F in repairs angular stop cock (concealed type) cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe etc all as specified and as directed.
S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified.
S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets complete all as specified.
S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position etc all as specified and as directed.
S&F in repairs PVC connection 15 mm dia and 600 mm long with PTMT and nuts complete all as Specified and as directed.
Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store
Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store
S& F for 20mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc
S& F for 25mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc
S&F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as Specified and as directed.
Cutting chases in PCC block walls/brick wall for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge.
S&F rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge.
S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge.
Dismantling of mild steel/structural steel work of any description incl door/gates/grills/fencing post etc complete all as specified.
S & F for 1.25mm thick steel rolling shutters , with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete, gear operated type with chain wheel and hand chain
S&F safety level locks mild steel with 4 levers for rolling shutter all as specified and directed
S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete
S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; amework of water tanks and similar work conforming to Fe.290.Gde-E-165
M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer all as directed.
M&L for preparation of old steel surfaces over 10 cm in width or girth not otherwise described and applying one coats of synthetic enamel paint over one coat of red oxide primer all as directed.
Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified.
M&L for rendering in two layer i.e.5mm thick in CM 1:4 including with or without mixing water proofing compound over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished even and smooth without using extra cement on all as specified.(Note WPC shall be measured and paid separately)
M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.
M&L for preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.
M&L for preparation of old plastered wall surfaces with 3mm average thick wall care putty and applying one coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.
Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.
Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.
M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified.
Providing precast cement concrete solid building blocks or slabs Type C1 1:3:6 (20 mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar(1:4) complete, in walls
M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed by Engineer-in-Charge.
M&L for 75mm thick PCC (1:3:6) type C-1 (20 mm graded aggregate) as in plinth protection finished even and smooth without using extra cement including forming 6mm wide joints at n,exc 2.0 sqm area and filling with mastic comprising one part of heated bitumen 85/25 grade and three parts of sand complete all as specified.
M&L for Plain cement concrete 1:3:6, Type C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc., complete all as specified and directed.
Dismantling fencing wire mesh, any type
Supply & fabricate and fixing in position angle iron posts for fencing posts and struts including flat iron etc and including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets for securing fencing including all necessary welding , drilling, bolting or riveting, complete all as specified and directed.(Steel confirming to Fe-290 (Gde E-165)).
Supply only galvanised chain link fencing, 40x40x4mm all as specfied.
Fixing only chain link fening including line wires, any mesh, size type to any type of standards, rails,straining bolts, etc. including provision of binding wire
S & F for 10mm dia MS round bar for tighting/securing fencing wire etc,including two coats of synthetic enamel mpaint over a coat of red oxide
M & L for Mild steel screw bolts (machine made) with hexagonal or square head one end and screwed the other, or screwed both ends each screw-wed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long diameter of neck in exc 16mm and n.exc 20 mm
M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in cooping
M&L for preparation on newly plastered wall surface and applying two coats of cement base paint complete all as specified and as directed.
M&L for preparation of old surfaces of walls and applying one coat of cement base paint including filling of cracks, holes and including leveling the surface which undulation found with cement putty etc. complete all as specified.
M&L for preparation of old surfaces of walls and applying two coat of cement base paint including filling of cracks, holes and including leveling the surface wherever undulation found with cement putty etc upto 26 meter height including necessary use of scaffolding for over head tank. complete all as specified.
M&L for preparation of old plastered surfaces of ceilings and applying one coat of white wash complete all as specified.
M&L for 150mm thick PCC (1:2:4) type B2 using 40mm graded stone aggregateas in floor, hard standing including use of formwork and finishing surfaces even and smooth complete all as specified & directed by Engineer-in-Charge.
M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in floor, hard standing including use of formwork and finishing surfaces even and smooth complete all as specified & directed by Engineer-in-Charge.
M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound primed and sealed with sealing compound , grade 'A' complete all as specified.
M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in 75mm thick as in sub base complete all as specified & directed by Engineer-in-Charge.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand
S&F for chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigment set jointed and pointed in neat cement slurry laid over and including 20 mm thick screed bed of cement mortor (1:6) in floors.
M&L for pre cast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings cover slab for manholes shelves etc, set in cement mortor (1:6) includingndismentling of old cover slab all as specified and directed
M&L for TMT bars (Fe-500/Fe500D) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or twisted bars.
M&L for cement concrete1:2:4 Type B-2 Using 40mm graded stone aggregate as in surface channels or drain
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified
Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto item above item
Writing letters or figures (Block Roman, Italic or Indian) n exc. 30 cm high with thick paints so that thoy standard boldly and solidly without showing signs of brush work all as specified and as directed
(i) Removing existing water proofing treatment of any description, any type on roofs, picking, sweeping, cleaning and washing down with water to remove all loose particles, dust etc complete all as directed by Engineer-in-charge. (ii) While doing the treatment on existing roof, concrete should be thoroughly inspected for any significant distress, if any shall be repaired. rehabilitated and treated. Pipes over roof shall be realigned where ever required. (iii) Cleaning the surface of roof & up to 300 mm of parapets and crumple joint including junction of roof and parapet, providing and laying / fixing TPO (Thermoplastic Polyolefin) waterproofing membrane FOSROC Proofex ORG (Minimum 2 mm thick) over a min 200 GSM Geo textile or Asian Paints TPO or equivalent product of M/s MC Bauchemic / CIPY/ SIKA/ Pidilite or Dr Fixit TPO membrane, applied as per manufacturer’s instructions. (iv) The work shall be carried out complete as per manufacturer’s specifications and application methodology. Execution to be done with authorised trained / skilled applicator of manufacturer as per the technical guidelines laid by manufacturer, Company guarantees to be given by contractor after completion of water proofing work before payment.
Dismantling plain or corrugated steel sheeting, any gauge thickness including roof coverings
Dismantling WI or MS work of any description in any position
S&Fof Steel work in tubular posts, trusses including and purlins, special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240.
S & F of Structural steel section as in main and cross beam, hip and jack rafter,purline where connected to common rafters , Vertical Posts etc fixed with angle cleats or other connecting plates cleats etc using ERW or induction butt welded tubes confirming to IS 1161-1998 grade St -240 or with hollow structural steel sections confirming to IS 4923-1997 Grade St 240 all as specified and as directed.
S&F Pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed.
S&F Pre painted galvalume aluminium zinc coating GI based plain sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed.
S & F for mild steel work as in wind tie for roof any size fixed with self tapping screws of any size with integral EPDM washer in roof covering and including dismantling of old wind tile
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome primer on Surfaces of any description,over 10cm in width or girth, not otherwise described complete all as specified and as directed.
M&L for preparation of old steel surfaces and applying one coat of synthetic enamel paint on Surfaces of any description,over 10cm in width or girth, not otherwise described complete all as specified and as directed.
M&L for preparing old wall surfaces and applying one coat of cement base paint.
SRI RAM CONSTRUCTION
Rajesh Engineering Consultants
S J REDDY
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .