Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST L1 | |
| 2 | L2₹15.7 L+₹1.5 L (10.8%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹15.9 L+₹1.7 L (11.9%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹16.6 L+₹2.4 L (16.8%)Rejected-Finance AZAD COLONY B 90 FEET ROAD SOURA SRINAGAR J K 190011 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190011 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹16.6 L+₹2.4 L (16.9%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹18.5 L
EMD Value
₹37,000
Closing Date
31 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE 970 EWS C/O 56 APO PIN 913970
REPAIR AND MAINT OF EXT ELECTRIC INCL LT OHT LINES LT PANELS DG SET SUMMER WINTER APPLIANCE AND CONNECTED WORKS AT SONAMARG HAWS AND GUND UNDER GE 970 EWS
2022_MES_542586_1
GE 970 EWS-39/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE 970 EWS C/O 56 APO
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹37,000
Yes
9 Mar 2023
2 Aug 2022
2 Sept 2022
2 Aug 2022
31 Aug 2022
17 Aug 2022
60 days
Amount
Excavation in trenches in soft / loose soil not exceeding 1.5 Mtr in wide and not exc. 1.5m in depth for taking out / laying of under ground cable in trenches or cable ducts all complete all as specified.
Excavation in trenches in soft / loose soil not exceeding 1.5 Mtr in wide, exceeding 1.5 m depth and not exc. 3.0 m in depth for taking out / laying of under ground cable in trenches or cable ducts all complete all as specified.
Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick in soil after repairing / jointing and laying and testing of cables complete all as specified
Removing surplus soil to a distance not exceeding 50 Mtr and deposited at a level not exceeding 1.5 mtr above from the starting point complete all as specified
M&L natural river sand as cushioning of cables including spreading and punning down all as per clause No 19.75 of SSR part -I all as specified. Note : punned thickness shall be measured for payment purpose
Supply and lay brick of conventional size 230x110x75mm locallly available as protection of cable in trenches complete all as specifed and as directed.
Laying only of serviceable bricks of any size and type recovered during taking out of old cable, over newly laid or re-laid cables complete all as specified and directed.
M&L for 50mm dia GI pipe medium grade for cable protection and sealing both ends including taking out old pipe complete all as specified and directed.
M&L for 80mm dia GI pipe medium grade for cable protection and sealing both ends including taking out old pipe complete all as specified and directed.
M&L for 100mm dia GI pipe medium grade for cable protection and sealing both ends including taking out old pipe complete all as specified and directed.
Relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 2/3.5/4 core 16 to 70 sqmm in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified and directed. Note ;- Lugs and Glands will be measured and paid separately.
All as per Item Sl No 11 above but of size 3.5 core 95 to 240 sqmm
Taking down old unserviceable LT UG cable from any description (tranches, walls, ceilings.,etc) from various locations, including any length, supply and laying under ground LT cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area 16 Sq mm, 4 core, with aluminium conductor with suitable size aluminium cable lugs and jointed in any description complete all as specified and directed. NOTE:- 1. Excavation , concrete cable protection bicks, pipe, PCC work for crossing/hard standing and sand for cushioning will be measured and paid separately. 2. Cost of aluminium cable lugs (eye lid/barrel/bottle neck type/ring type or any shape), gable gland, new nut bolt and washers of required size shall be deemed to be included in the unit rate quoted by the tenderer.
All as per item Sl No 13 above but of size 16 sqmm 2 core
All as per item Sl No 13 above but of size 25 sqmm 4 core
All as per item Sl No 13 above but of size 35 sqmm 3.5 core
All as per item Sl No 13 above but of size 50 sqmm 3.5 core
All as per item Sl No 13 above but of size 70 sqmm 3.5 core
All as per item Sl No 13 above but of size 95 sqmm 3.5 core
M&L straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 16sqmm x 4 core cables including testing and commissioining complete all as specified Make : Densons / 3M / Raychem
All as per item Sl No 20 above but of size 25 to 50sqmm x 3.5 / 4 core, as per the size of existing UG cable. Make : Densons / 3M / Raychem
All as per item Sl No 20 above but of size 70 to 120 sqmm x 3.5 core, as per the size of existing UG cable. Make : Densons / 3M / Raychem
M&L LT indoor/outdoor end joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty cables with aluminium conductor including jointing kit, including making joints for the cable of size 150/185 sqmm x 3.5 core cables including testing and commissioining complete all as specified ( Make : Densons / 3M / Raychem)
M&L LT indoor/outdoor end joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty cables with aluminium conductor including jointing kit, including making joints for the cable of size 240-300 sqmm x 3.5 core cables including testing and commissioining complete all as specified ( Make : Densons / 3M / Raychem)
Material & labour in repairs ACSR conductor any size from poles including stringing on LT poles complete including aluminium binding wires, jumpering, bindings at insulators etc complete all as specified and dirceted.
Supply & fixing in repair 250 A 4 pole MCCB, 36 KA, 415V, 50 Hz, AC supply adjustable type of thermal and megnatic setting including necessary cable lugs & wire etc complete all as specifeid and directed.
Supply & fixing in repair 250 A 3 pole MCCB, 36 KA , 415V, 50 Hz, AC supply adjustable type of thermal and megnatic setting including necessary cable lugs & wire etc complete all as specified and directed.
Supply & fixing in repair 200 A 3 pole MCCB, 36 KA, 415V, 50 Hz, AC supply adjustable type of thermal setting including necessary cable lugs & wire etc complete all as specified and directed
Supply & fixing in repair 100 A 3 pole MCCB, 16KA , 415V, 50 Hz, AC supply including necessary cable lugs & wire etc complete all complete as specified and directed.
Supply & fixing in repair 63 A TP MCCB, 16 KA, 415V, 50 Hz, AC supply including necessary cable lugs & wire etc complete as specified and directed.
Supply & fixing in repair digital type Ammeter 96X96 mm square Flush mounted case of class 1.0 complete as specified and directed.
Supply & fixing in repair digital type Voltmeter 0-500V, 96X96 mm square Flush mounted case of class 1.0 complete as specified and directed.
Supply & fixing in repair CT 400 - / 5A, 200/5A or 100/5A for ammeter complete as specified and directed. MAKE : AE / IMP / MECO / MEI / HPL
M&L in repair for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galavanised earth strip 32x6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3, connected to earthing point of outdoor panel boards all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel, complete all as specified and testing on completion.
Supply and fixing in repairs decorative garden light (landscape lighting) made up of high grade unbreakable polycarbonate materials of capacity 9W LED complete all as specified and directed. Make : Bajaj Cat Part No BGBOM 650 9W LED (Tulip) or equivalent/Havells/CROMPTON. Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) The contractor should include the rates for PCC as required and nut bolts for fixing the light in the quotated rate.
Dismantling and taking down old unserviceable LT panel board from it's existing position after isolating electric supply and supply, install, tsting and commissioning of CPRI Approved LT panel board, outddoor, cubical, dust and vermin proof made out of 3.0 mm thick MS sheet with front and back door openable type fitted with nuts, bolts and washers fitted with knobs and hinges and air vents incl painting with two coats of enamelled paint over a coat of red oxide primer, suitable for 415 Volt, 50 Hz, 3 phase, 4 wire suitable for and incl the following (Distribution panel 1 & 2) :-
a). MCCB 4P 250 Amps 25 KA - 01 (Incoming)
b). MCCB TP 63 Amps,25 KA - 06 Nos (outgoing)
c ). MCB TP 32 Amps,25 KA - 01) (outgoing)
d). MCB SPN 32 Amps 16 KA - 01) (outgoing)
g). LED indicator lamp -03 Nos
h). Aluminium bus bar chamber of capacity with bub bar 400 Amps TPN with bub-bar insulator etc in clour coding
j). Internal wiring with suitable size single core copper conductor cable of Red,Yellow, Blue and black colour including lugs, Ferrule, tag etc
M & L for painting the steel Surfaces of any description, not otherwise described, over 10cm width or girth with synthetic enamel paint after preparing the old surface, properly removing the dust, wornout material, applying one coat of primer all complete as specified and described. make : Berger Paints/ Asian paint
Disconnecting the windings of loose overhead conductors of LT lines from insulators and restringing the same for proper sag and rewinding incl aluminium winding wires, tapes etc and jumpering for any type of conductor complete of single run conductor all as directed. Note: Triming of tree branches around the pole upto 3 mtr is deemed to be included in the rates quoted.
Taking out old unserviceable steel tubular/RCC poles 9 mtr long and supply and erection of steel tublar swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts, screws as specified type 410 SP-31 (9.0 mtr long) and shifting of conductors and insulators etc incl painting the exposed portion of the pole with two coats of aluminium paint over a coat of red oxide primer and internally through out plus embedded portion with two coats of black bituminous paint over a coat of red oxide primer. Marking of pole number with black paint in yellow circle all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of insulator pin type porccelain viterious, white brown or green insulator including one galvanised mild steel spindle, two galvinised washers and one GI nut 100 mm hight and 65 mm dia for 1100 Volt grade complete all as specified and directed.
Supply and fixing in replacement of insulator shackle type porccelain viterious, white brown or green insulator including one galvanised mild steel strap, washers, insulator bolts, washers and nuts for working preasure 100 mm hight and 65 mm dia for 1100 Volt 115 mm dia, section of strap (31 x5) mm dia of bolt 14mm complete all as specified and directed.
Supply and fixing PVC line spacer (Separator) of superior quality of 4 way spiral type for three phase over head conductor complete all as specified and directed
Supply and fixing PVC line spacer (Separator) of superior quality of 6 way spiral type for three phase over head conductor complete all as specified and directed
M & L for Painting of steel tubular pole 9.0 mtr long, by applying one coat of alluminium paint after scraping / brushing and cleaning the rust on pole and cross arms . Alluminium painting will be done on pole above 1.5 Mtr hight from ground level and balance 1.5 mtr from ground level will be painted by alternate layer of black and white enammelled paint ( 30 cms each) Pole Nos will be written on pole by black paint in yellow circle of 150mm dia all as directed.
Supply and fixing in repair off load change over switch in sheet metal enclosure of capacity 4P 63 Amps, complete all as specified and directed. Make :- Indoasian or equivallent in CG/ Havells
Supply and fixing in repair on load change over switch in sheet metal enclosure of capacity 4P 100 Amps, complete all as specified and directed. Make : Indoasian or equivallent in CG/ Havells
Supply and fixing in repair on load change over switch in sheet metal enclosure of capacity 4P 200 Amps, complete all as specified and directed. Make :Indoasian or equivallent in CG/ Havells
S & F in repair of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front having 3500 lumen output mounted on MCPCB in gress protection IP-66 complete all as specified and as directed. Make : Havells or equiavalent in Phiips/ Crompoton.
S & F in repair of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front having 6000 lumen output mounted on MCPCB in gress protection IP-66 complete all as specified and as directed. Make : Havells or equiavalent in Phiips/ Crompoton.
S & F in repair of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front having 9000 lumen output mounted on MCPCB in gress protection IP-66 complete all as specified and as directed. Make : Havells or equiavalent in Phiips/ Crompoton.
S & F in repair of LED driver suitable for upto 6000 lumen lumanaries complete all as speified and directed.
S & F in repair of LED driver suitable for upto 9000 lumen lumanaries complete all as speified and directed.
Supply only Kit, fuel filter (Primary, secondary & super bye pass) and ring complete for 30/35 Kva DG set.
Supply only Element for Lubrication oil filter for 180/200 Kva DG set.
Supply only Seal, O Ring for 30/35 Kva DG set.
Supply only Air Cleaner element for 30/35 Kva DG set.
Supply only Tappet cover Gasket for 30/35 Kva DG set.
De-scaling of radiator assembly by carefully removing from the engine, transporting to the workshop (if required) and removing the sediments, scales and rust etc by means of acid cleaning, high pressure water washing and air cleaning, arresting the leakages by gas welding / soldering with suitable material at workshop or at site, re-assembling the same with new gaskets including replacement of radiator cap (wherever required) and fixing to the engine for DG Set of capacity from 30 / 35 KVA complete all as specified and directed by Engineer-in-Charge.
Taking down the defective radiator assy from the position transport to work shop removing the damaged cooling fin layer, supply and fix single layer radiator fin assy of complete set made up of copper fins and tube suitable for 30/35 KVA DG set of any make incl bracing work in any layer for the same all as directed.(Note : Each layer of cooling fin shall be measured and paid separetely)
Supply & filling Coolant concentrate Superkool xtra as required in the DG oil sump all as directed.
Supply & filling Engine Oil Premium Blue 15 W 40 grade API CI 4 PLUS / Kirloskar engine oil as required in the DG oil sump all as directed.
Dismantling the defective alternator / field winding of any capacity from the existing foundation and from Engine after removing all electrical connections, transporting to approved / authorised / directed workshop, opening and taking out burnt winding, cleaning the stator assy rewinding with super enameled copper wire as per existing gauge as per original manufacturer and applying insulating varnishing of ‘F’ class, baking in oven re-assembling the alternator, transporting back to site re-installing the same position, carrying out alignment of complete DG set connecting up all electrical connections testing and commissioning complete. Note : - (a) Rate quoted shall be deemed to be inclusive of making good the disturbed surfaces. (b) The DG set shall be tested on load as per rated capacity for the satisfaction of Engineer- in- Charge to achieve designed parameters.
S & F in repair door hinges for canopy of any capacity of DG set door including nut, bolt, drilling of hole, welding as per directed.
Dismantling the old and unserviceable DG Set rubber hose pipe complete set suitable for 30 /35 KVA DG set of any make and type and replacing the same with of existing size and equal length for any capacity DG Set including both side hose clamp, with nut, bolt and washers as required , etc as directed by the Engineer in Charge .
Supply and connect battery lead (not less than 1.00 m long each) made out of PVC Insulated Plain/Striped Automobile Cables with high conductivity bright annealed copper conductor bunched together, insulated with dielectric grade PVC compound (impervious to oils, greases, acids, petrol and water) conforming to IS 2465 of size 25 sqmm soldered one end with copper/brass connector with nuts and bolts for battery pole and the other with copper lug for self starter terminal including taking down of existing u/s battery lead with connector and lug of any description complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair rectifiers diodes for 30/35 KVA DG sets.
Supply and fix in repair maintenance free battery 12V, 150 AH for DG set including initial filling & Charging complete all as specified and directed by Engineer-in-Charge.
Dismantling the unserviceable Dynamo / Alternators 12/24 volts and rewinding with ‘F’ class copper wire of 22 /existing gauge incl dismantling the old coil, cleaning thoroughly and winding with super enamelled copper cord of existing size and gauge, varnishing, drying etc and re fixing with dynamo/alternator properly including testing on completion complete all as specified and directed by Engineer-in-Charge.
Dismantling the defective self starter assembly 12V/24V carefully from the DG set and carryout repair and servicing by cleaning all accessories with suitable cleaning agent and supply and replace commentator, carbon brush set, carbon brush holder, king pin holder, armature choke nut, body screens, clutch plate assay and solenoid etc re-assembling and re-fixing the same and testing on completion for DG set of capacity from 30/35 KVA complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair digital type Amp/volt meter square type up to 3 Phase AC 50 HZ, 500 volts of and connecting for DG set complete all as specified and directed by Engineer-in-Charge.
supply and fixing in repair lamp indicator assy LED lamp type 230 volts AC .
Supply and wrap asbestos rope of 10 mm dia of superior quality over silencer of DG sets including taking down of existing unserviceable rope complete all as specified and directed by Engineer-in-Charge. Note: Straight length of silencer is measured for the purpose of payment
S&F in replacement fan belt suitable for 30 /35 KVA DG Set as per existing model and size including dismantling the old one.
S & F in repairs self starter 12V/24V with sononoid switch assy complete set as per existing make of DG Set 30 to 35 KVA all as directed.
M&L for opening the unserviceable/burnt ceiling fan 1200/1400 mm sweep and cutting of old burnt copper winding and rewinding the same with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, reassembling, testing and connecting for satisfactory run, complete all as specified and directed (NOTE:- Taking down/dismantling of ceiling fan and refixing after repair shall deemed to be include in this unit rate.)
Supply and fixing in repair of ball bearing of the ceiling fan (any sweep) as per existing size incl greasing/oiling, complete all as specified and directed by engr-In-Charge. Make:- SKF/ NBC or Equivalent
Supply and fixing in repair of gun metal bushes of suitable size for ceiling fan incl necessary mechanical work, complete all as specified and directed by Engr-In-Charge.
Supply and fixing in repair of flexible cable, three core 0.5 Sqmm PVC insulated copper conductor cable for connecting ceiling fan, complete all as specified and directed. Make:- Plaza, Havells .
Supply and fixing in repair capacitor of of 2.5 MFD for ceiling fan, complete all as specified and directed.
Supply and fixing in repair capacitor of 4 Mfd for exhaust fan, complete all as specified and directed.
Supply and fixing in repair Stepped type electronic fan regulator flush type as per exisitng model on the existing board all as directed.
Supply and fixing in repair of ceiling fan blade set of three, heavy duty suitable for 1200/1400mm sweep of as per existing make as direcetd.
Supply and fixing in repair of PVC canopy for ceiling fan 1200/1400mm sweep complete for existing various makes/model of fan, complete all as specified and directed by Engr-in-Charge.
M&L in repair for opening and cutting of old burnt copper winding of exhaust fan and rewinding of exhaust fan motor of sweep 450mm with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, re-assembling, testing and connecting for satisfactory run, complete all as specified and directed as specified and directed. (NOTE:- Taking down/dismantling of exhaust fan and refixing after repair shall deemed to be include in this unit rate.)
All as per srl item No. 86 here-in-before, but 300mm sweep.
Supply and fixing in repair ball bearing of exhaust fan of any size/make as per the existing, complete all as specified and directed. Make: SKF/NBC or equivalent .
M&L for painting the exhaust fan including louvers of size 300/450mm sweep with two coats of synthetic enamel paint after cleaning and making the surface of oil/dust free, complete all as specified and directed.
M&L for servicing of geyser by disconnecting the electric and water supply connections, dismantling the geysers of any size, type & capacity and opening the top and bottom cover, thermostat, heating element, safety valve, vent pipe, separating inner & outer tank, removing glass wool insulation complete and keeping aside for re-use after de-scaling of inner tank by liquid chemical and with pressure water jet and assembling back the geyser including re-installation on wall with studs, nuts & bolts complete and testing after reconnecting electric and water connections, complete all as specified and directed.
Supply and fixing in repair heating element for geyser of capacity 1.5KW, AC 230 Volts, 50 Hz (as per sample), complete all as specified and directed. Make:- Micron/ Bajaj/ Havells
Supply and fixing in repair Heating element for geyser of capacity 2.0KW, AC 230 Volts, 50 Hz (as per sample), complete all as specified and directed. Make:- Micron/ Bajaj/ Havells
Supply and fixing in repair thermostat for Geyser of capacity 25/35/50/100 ltr (long size) with temperature setting adjustment range from 40 to 85°C, ISI Marked, complete all as specified and directed. Make:- Philips/ Bajaj/ Venus
Supply and fixing in repair geyser syphon assembly Set suitable for 25 ltr capacity geyser, fixed in replacement, as per existing complete all as specified and directed by engr-in-Charge.
All as per item Srl No. 94 above but for 35 Ltr capacity.
All as per item Srl No. 94 above but for 50 Ltr capacity.
Supply and fixing in repair rubber gasket for water heater storage type of any capacity and suitable as per the existing, complete all as specified and directed
Supply and Fixing in repair plug top 15/16 Amps for Geyser, complete all as specified and directed. Make:- Havells/ Anchor/Leader/Plaza
Supply and fixing in repair PVC sheathed three core copper conductor flexible wire of size 2.5 Sqmm for connecting geyser, complete all as specified and directed. Make:- Finolex/Polycab/L&T
Supply and fixing in repair of safety valve for geyser of 25/35/50 litre capacity, as per existing make complete all as specified and directed
Supply and fixing in repair of non return valve 15mm dia for geyser of 25/50 litre capacity, complete all as specified and directed.
Supply and fixing in repair heavy duty PVC connector 600mm long 15mm dia with PTMT nut for geyser of 25/50 litre capacity, complete all as specified and directed.
Supply and fixing in repair copper inner tank of geyser capacity 15/25 litre and refilling of glass wool, refixing, connecting and testing, complete all as specified and directed.
All as per item Srl No. 103 above but for 35 Ltr capacity.
All as per item Srl No. 103 above but for 50 Ltr capacity.
Supply & fixing in repair stop cock brass 15mm dia, complete all as specified and directed.
S & F in repairs sheet metal enclosure SPN with a two pin and earth plug and socket complete with one SP MCB 20 Amps complete all as specified.
Supply and fixing in repair of GI anchor Bolt 100 mm long with nut & washers for geyser, complete all as specified and directed
Supply and fixing in repair of compressor fo refrigerator of 165 to 200 ltr capacity as per the existing complete all as specified and directed.
Supply and fixing in repair of thermostat for refrigerator of 335 ltr capacity.
Supply and fixing in repair of thermal relay for refrigerator of 335 ltr capacity.
M&L for Charging refrigerant R134A and testing for proper cooling and leakage complete for refrigerator of 165 to 200 ltr capacity all as specified and directed.
Taking out unserviceable/burnt stabilizer of 3 KVA to 5 KVA capacity, rewinding the same with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, reassembling, replacement of knobs, LED's etc. and making fully functional on load as connected to Refrigerator/Deep freezer/AC complete all directed.
All as per item Srl No. 113 above but for capacity 1 KVA .
Supply and fix repair sensor board suitable for water heater 25/ 25 Ltr capacity complete all as specified and directed. Make :- Venus/bajaj/Usha
M/S Noor Mohammad Shalla
M/S RAFIQ AHMAD SOFI AND SONS
FG CONSTRUCTION
M/s Nasir Rasool Dar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .