SMART MAINTENANCE TO INCLUDE REPAIRS TO LEAKAGE SEEPAGE TANK CLEANING SUNKON PORTION ROOF TREATMENT AND REPAIRS TO PLINTH PROTECTION DRAIN PATH CULVERT AND HARD STANDING FENCING RCC JALI AND MISC WORKS IN OFFRS MD ACCN ADM BLDG (9105/E8)

Amount

Note :- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ . (ii) Makes of material will be approved by GE in writing before commencement of work.

Demolition of cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) including removal of debris from site of work, complete all as directed.

M&L for 40mm thick plain cement concrete 1:2:4, type B-1, (using 20mm graded crushed stone aggregate) as in floor including finishing cement concrete surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in flooring,path , foundation etc., complete all as specified and as directed.

M&L for 50mm thick, PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection or similar places, without using extra cement, complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the out of MOD land, complete all as directed.

M&L for 25mm thick, cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) use as a levelling course, complete all as specified and as directed.

M&L for non skid ceramic colour joint free tiles (premium quality) 6 to 7 mm thick of size area exc 0.06Sqm but not exc 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over & including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson/ Orient bell as approved by GE.

M&L for Non - skid coloured Ceramic tiles (premium quality) 7 to 8 mm thick (square/ rectangular) area of each tile xceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson/ Orient bell as approved by GE.

M&L for non-skid coloured ceremic tiles (premium quality) joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade over & including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson/ Orient bell as approved by GE.

M&L for Glazed ceramic coolured tiles (premium quality) in vertical surface 350 x 250 x 7mm / 450 X 350 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick cement mortar 1:4 on stone masonary rendering, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson/ Orient bell as approved by GE.

M&L vitrified Ceramic tiles (Double charged) any shade 10mm thick (Square / rectangular) polishbed , area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to match over & including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson/ Orient bell as approved by GE.

All as per item No.12.00 above but vertical stone wall surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc., complete all as directed.

M&L Rendering 10 mm thick CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth, complete all as specified and as directed.

S&F wire netting galvanised steel wire cloth 0.9 mm nominal dia and 12 mm mesh lathing and fixed to ceiling including all laps, cutting and waste fixed with nails on ceiling, complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:4 finished even and smooth without extra cement on stone wall surface, complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface, complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry, Jodhpur type, regular course built in cement mortar, complete all as specified and as directed.

M&L for Keyed pointing to square rubble stone masonry, Jodhpur type, regular course in CM 1:3, complete all as specified and as directed.

M&L for two coats of oil bound distemper including one coat of primer including preparation of surface, complete all as specified and as directed.

M&L for three coats of white wash on newly plastered surface of ceiling including preparation of surfaces, complete all as specified and as directed.

M&L two coats of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation of surface, complete all as specified and as directed.

M&L for one coat of white wash on old surface of wall including preparation of surface, complete all as specified and as directed.

M&L for one coat of white wash on old surface of ceiling including preparation of surface, complete all as specified and as directed.

M&L one coat of colour wash on old surfaces including preparation of surface, complete all as specified and as directed.

Complete removal of existing treatment and preparing old decorated plastered or un-plastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and washing down with water including, complete all as directed.

M&L for applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces, complete all as specified and as directed.

M&L applying one coat of synthetic enamel paint on old painted surface wooden surfaces of any description over 10 cm width or girth including preparation of surfaces, complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces, complete all as specified and as directed.

M&L for applying one coats of synthetic enamel paint on old steel serface of any description over 10 cm width or girth including preparation of surfaces, complete all as specified and as directed.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame, complete all as directed.

Taking down chowkhats or frame exc 1.5 Sqm but not exc 4 Sqm each without taking off shutter from the frame, complete all as directed.

Taking down shutter of any description, exc. 1 Sqm but not exc 2 Sqm each, complete all as directed.

Mild steel work as in doors frames using MS angle iron, complete all as specified and as directed.

Mild steel framed work as in brackets etc for coller stands , chajja etc framed steps/stairs etc., complete using MS angle iron Steel bars gusset plate etc., complete all as specified and as directed.

Supply and fabrication of Mild steel guard bars and welded to window frames, complete all as specified and as directed.

M&L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape including two coats of synthetic enamel paint on internal surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as per drg No. CEBZ/TD/12/2008 sht 1/3 to 3/3, complete all as specified and as directed.

S&F 35mm thick (2nd class hard wood) factory made glazed and skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., complete all as specified and as directed.

S&F 35mm thick factory made (2nd class Hard wood) paneled door shutter factory made (two panel) with lock rail and panel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color PVC ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

M&L for solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with MS square tube, complete all as specified and as directed.

Taking down steel window/ventilator, complete all as specified and as directed.

S&F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, with cooler opening, dovetailed or welded, complete all as specified and as directed.

S&F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars, with cooler opening, dovetailed or welded , complete all as specified and as directed.

S&F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F of steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for glazing dovetailed or welded, complete all as specified and as directed.

S&F of steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for gauze dovetailed or welded, complete all as specified and as directed.

Repair to steel window including taking down, replacement of unserviceable hinging device box type , handles, making them in serviceable condition and re-fixing in same opening including making soffits and jambs in CM 1:4, complete all as specified and as directed of Engr-In- charge satifaction.

S&F of stainless steel ,tower bolt 200 mm long, complete all as specified and as directed.

S&F Stainless steel handle size 150mm long complete all as specified and directed.

S&F of stainless steel sliding door bolt with hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

S&F butt hinges 100 mm long,extruded aluminium alloy with mild steel hinge pin anodised type C- 21 for PVC door, complete all as specified and as directed.

S&F of stainless steel butt hinges 100mm size, complete all as specified and as directed.

S&F in repair of mild steel butt hinges 100mm size including welding fixed to frame, complete all as specified and as directed.

S&F 100mm size single action door spring hinge, complete all as specified and as directed.

S&F in repair 100mm size single action door spring hinge including welding fixed to frame, complete all as specified and as directed.

S&F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long, complete all as specified and as directed.

Hackilng out old broken glass (any thikness, size quality or description) from metel frame including punching or drilling cut old glazing pins & providing fixing new ones, complete all as specified and as directed.

S&F of 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty, complete all as specified and as directed.

S&F for 3 mm thick plain glass ordinary quality & glazing, complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm, complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm, complete all as specified and as directed.

S&F in repiar galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm as in necessary weilding, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 Mix (using 20mm graded crushed stone aggregate) as in hold fast iron fixing including necessary form work, complete all as specified and as directed.

S&F flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item, complete all as specified and as directed.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms), complete all as specified and as directed.

S&F in repair SS with decorative 25mm curtain rod with fixing brackets and fancy type finial ends etc., as in repairs, complete all as specified and as directed.

S&F in repair soap dish of PTMT fixed with screws, complete all as specified and as directed. Make : Prayag/ Commander/ Polytuff as approved by GE.

S&F in repair PTMT towel rail 450 mm long fiexd to wall with chromium plated brass screws and woodn cleats Min weight 170gms approved make, complete all as specified and as directed. Make : Prayag/ Commander/ Polytuff as approved by GE.

S&F in repair MS chromium plated peg set of five, fixing on wall with screws, complete all as specified and as directed.

S&F in repair Stainless steel sink ,1.00mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm, complete all as specified and as directed. Make : Jayna/ Blue Star/j Nirali as approved by GE.

S&F as in repairs of vitreous china clay, water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc., complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.

S&F as in repairs vitreous china wash down water closet european Type pedestal pattern with seat cover and jet spray complete incl fixing of flush pipe etc., complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.

S&F in repair Vitrous china wash basin, white flat back size 550x400 mm including , waste pipe, MS brackets, complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.

S&F in repair 15mm bore pillar cock, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and as directed. Make : Jaquar Cat No. QQT 7011 or equivalent in Kohler/ Cera as approved by GE.

S&F in repair 20mm dia stop valves (ISI Marked), cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20mm dia, complete all as specified and as directed.

S&F in repair 25mm dia stop valves (ISI Marked), cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia, complete all as specified and as directed.

S&F as in repairs 15mm dia angular stop cock with chromium plated long thread with flange , complete all as specified and as directed. Make : Jaquar Cat No. QQT-7053 or equivalent in Kohler/ Cera as approved by GE.

S& F as in repairs 15mm dia stop cock regular body with adujstable wall flange (concealed type), complete all as specified and as directed. Make : Jaquar Cat No. QQT-7083 or equivalent in Kohler/ Cera as approved by GE.

S&F in repair of bib, cock 15mm dia, cast copper alloy with crutch or butterfly handle, screwed for iron pipe, complete all as specified and as directed. Make : Jaquar Cat No. QQT-7037 or equivalent in Kohler/ Cera as approved by GE.

S&F in repair low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection, complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.

Taking down PVC low level flusing cistern from the wall and fixed the same opening after replace the flush bend, complete all as directed.

Dismantling of water tanks of capacity exc 250 ltrs but not exc 500 ltrs and removing to store, complete all as specified and as directed.

S&F 500 ltrs cap rotational moulded polythene water storage tanks triple layer White coloured (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank including tank led cover complete with fixing arrangement, complete all as specified and as directed. Make : Sintex/ Rotex as approved by GE.

S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.

M&L 50mm thick PCC 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) for water tank plinth, complete all as specified and as directed.

Demiolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise and removing of debris outside MD Land, complete all as directed.

Providing precast RCC using 1:2:4 Type B1 (using 20mm graded crushed aggregate) as in cover slab for man hloes set in CM 1:4, complete all as specified and as directed.

TMT bars 6 to 8mm dia and over, cut to length , bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in stirrups also, complete all as specified and as directed.

M&L for 5 cm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab , complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, dry bedded and removal of rubbish outside MD land, complete all as specified and as directed.

M&L 18 to 20 mm thick granite(approved quality by user ) in WHB counter top etc laid in dry bedded in pinning to wall including cutting rubbing grinding and polishing to edges and rounding off granite polish slab for smooth finish, complete all as specified and as directed.

S&F continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised, 30 mm width of flap (when open), complete all as specified and as directed.

S&F in repair 18/19 mm thick pre-laminated particle board exterior grade, pre-laminated one side with decorative choice of lamination and other side balancing white lamination as in cup board shutter fixed with screw teak wood beading all round/ exposed faces, complete all as specified and as directed.

S&F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink, complete all as specified and as directed.

S&F in repair 40 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink, complete all as specified and as directed.

S&F 35 mm thick, pre-cast cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in louvers & jallies/ zafri (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:4, complete all as specified and as directed.

M&L providing precast concrete 1:2 :4 type B-1 (using 20 mm graded crushed stone aggregate) as in RCC jalli post setting in mortar 1:4, complete all as specified and as directed.

S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks, triple layer (white colour) (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991, complete all as specified and as directed. Make : Sintex/ Rotex/ Polytuff as approved by GE.

M&L in repair for high quality looking mirror fancy type oval shaped 5 mm thick with with round edge fixed to wall with chromium plated bolt area not exc 2.0 sqm, complete all as specified and as directed by Engr-in-charge.

S&F in repairs EWC complete dual flush with seat cover elegance etc., complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.

S&F in repairs white coloured WHB counter top ofsize 525x390mm including waste pipe, complete all as specified and as directed.

S&F in repairs chromium plated 100mm dia shower with swivel joint of, complete all as specified and as directed. Make : Jaquar Cat No. or equivalent in Kohler/ Cera as approved by GE.

S&F in repairs15mm bore centre hole Basin mixture chromium plated, complete all as specified and as directed. Make : Jaquar Cat No. QQT-716B or equivalent in Kohler/ Cera as approved by GE.

S&F wall mixture chromium plated with bend pipe, complete all as specified and as directed. Make : Jaquar Cat No.QQT-7281 or equivalent in Kohler/ Cera as approved by GE.

S&F in repairs long nose pillar cock long threaded , complete all as specified and as directed. Make : Jaquar Cat No. CQT-23021B or equivalent in Kohler/ Cera as approved by GE.

S&F in repaird two way bib cock15mm bore chromium plated, complete all as specified and as directed. Make : Jaquar Cat No.QQT-7041 or equivalent in Kohler/ Cera as approved by GE.

S&F Cabinet type Mirror approved type standard size 300x450mm all as specified and directed.

S&F steel type plate rack sample approved by Engr-in-Charge, complete all as specified and as directed. Make : Jayna/ Blue Star/ Nirali as approved by GE.

S&F framed work as in door or gates ornamental type of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to br prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering runing rails and guides) including forging item (tersule etc) and hanging also fastening and fixing Conforming to Fe 290.Gde E165, complete all as specified and as directed.

Applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces, complete all as specified and as directed.

Dismantling of AC sheet (corrugated or semi corrugated etc.,) including AC ridges as in roof covering, complete all as specified and as directed. Note:- Opening of existing wind tie where required for taking down of AC sheet is included in the rate quoted against this item.

S&F 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with 'J' type bolts, complete all as specified and as directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Taking down or up steel tubing and connection including cleaning for refixing or removal to store, complete all as directed. (a) 25 mm dia

(b) 20 mm dia

(c ) 15 mm dia

S&F GI water tubing, medium grade, galvanized, with all fittings fixed to wall, complete all as specified and as directed. (a) 25 mm dia

(b) 20 mm dia

(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

S&F GI water tubing, medium grade, galvanized, with all fittings fixed to wall, complete all as specified and as directed. (a) 25 mm dia

(b) 20 mm dia

(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

Demolition of existing water proofing Treatment including PCC padding etc and cleaning roof surface etc preparing the surface to receive plaster /PCC by brushing with wire brush and fanning the surface to remove all loose dirt etc. complete all as directed.

M&L for PCC 1:2:4, type B-O (using 12.5mm graded crushed stone aggregate) as over roof for making good depression/undulation to make the existing as filling in depression of roof slab for receiving treatment of roof, complete all as specified and as directed.

M&L for PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof kerb including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for roof treatment in the following stages, complete all as specified and as directed :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 3.00Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 1.40 Sqm and grooves shall be filled with bitumen

Supply only Integral water proofing compund (ISI Marked), complete all as specified and as directed.

Complete removal of folliage/vegitation growth on buildings and in over non accessible roof, chajjas, wall and similar surfaces etc., and making good the surfaces, area of each job not exceeding 1.00 Sqm, including disposal of debris to a distance n.exc 50m of area of, complete all as directed. (Note : Appx height of Bldg is 7.00 mtrs).

M&L for PCC (1:5:10) lean cement concrete type E2 (using 40 mm graded crushed stone aggregate) in mass concrete after carrying out satisfactory testing of CI pipes/ PVC pipe joints and slab/walls by filling water for 72 hourse. sunken portion of nahani/ floor trap and pipe joints shall be embedded in PCC 1:3:6 type C1, complete all as specified and as directed.

S&F GI pipe 32mm bore light grade galvanised shall be provided 30cm beyond wall surface between to drain out leakage in if any. The mouth of GI pipe shall have greval to avoide chocking. Top of sunken portion of RCC slab to be finished such that its slope towards spout, complete all as specified and as directed.

M&L Factory made, chequred cement concrete tile 25 cm x 25 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

M&L Factory made coloured chequred tile (premium quality) 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

M&L coloured parking/varandah tile 30 cm x 30 cm 8-10 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

S&F Factory made machine Pressed precast cement concrete blocks (interlocking pavers) of 60mm thick M-35 Grade over and including 25mm thick sand cushion. The interlocking joints shall be filled with fine sand, complete all as specified and as directed.

S&F machine made precast cement concrete blocks (interlocking pavers) of 60mm thick M-35 grade, rubberised with 6mm top layers of ante abrasive material laid over and incl 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2, complete all as specified and as directed.

S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C-2 (using 20mm graded crushed stone aggregate), complete all as specified and as directed by Engr-in-Charge.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed.

M&L PCC solid building blocks 10 Cm thick of PCC 1:2:4 type B-1 set in cement mortar (1:6), complete all as specified and as directed.

M&L for squared rubble stone walling, Jodhpur type, regular coursed, well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.

-Ditto- All as per item No. 145.00 above item but except stone, complete all as specified and as directed.

M&L Precast cement conerete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid block exc 10 CM width and setting in cement cortar 1:6, complete all as specified and as directed.

Extra over square rubble stone walling, Jodhpur type, regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed.

M&L two coats of cement base paint over a coat of white chalk on wall over a plaster/ unplastered surfaces including preparation of surface, complete all as specified and as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as directed.

S&F 100 mm dia, Cast soil waste, and vent pipes in any length with or without ears with cement joints laid in trenches or in floor, complete all as specified and as directed.

S&F 75 mm dia, Cast soil waste, and vent pipes in any length with or without ears with cement joints laid in trenches or in floor, complete all as specified and as directed.

S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall, complete all as specified and as directed.

S&F 75 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall, complete all as specified and as directed.

S&F in repair 100mm CI bends any radius, complete all as specified and as directed.

S&F in repaie 75 mm dia CI bend with oval acess door fixed to pipe, complete all as specified and as directed.

S&F in repair 75 mm dia CI floor trap plain grating including jointing with solvent cement, complete all as specified and as directed.

S&F in repair Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggreate), complete all as specified and as directed.

S&F in repair of PVC SWR gully trap 125/110 mm size including setting and jointing with solvent, complete all as specified and as directed.

S&F 110 mm PVC SWR pipes single socketd in any length with rubber rings joints laid fixed in wall, complete all as specified and as directed.

S&F 75 mm PVC SWR pipes single socketed in any length with rubber rings joints fixed to wall, complete all as specified and as directed.

S&F110 mm PVC (SWR) bends any radius, complete all as specified and as directed.

S&F 75 mm PVC (SWR) bends any radius, complete all as specified and as directed.

Dismantling of RCC fencing post or struts of any description/section including taking out embeded ,barbed wire in concrete and making good disturbed, complete all as directed.

Dismantling of old Chain link fencing, complete all as directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum in soft/loose soil getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm watering and removing surplus soil to a distance not exc 50m and making good surfaces in any type of soil, complete all as specified and as directed.

S&F for angle iron frame work for fencing post, chajja conforming to fe 410-O or 310-O, complete all as specified and as directed.

S&F MS flat iron tie with angle iron post for chain link fencing, complete all as specified and as directed.

M&L for round bars 10mm dia and over, cut to length , bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in stirrups alsoFE 410-w(Gde, E-250 quality A or Fe 290(Gde-E-165), complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.

"Supply only" chain link MS galvanised fencing of size mesh 50mm x 50mm, complete all as specified and as directed.

"Fixing only" chain link MS galvaniced fencing including line wires any mesh size and type to any type of standards, rails straining bolts etc., including peovission of binding wire, complete all as specified and as directed.

Dismantling of old barbed wire, complete all as directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured) IWA type, complete all as specified and as directed.

M&L mild steel bolts, machine made, 10mm dia of neck hexagonal or square head at one end and screwed the other or screwd both ends each screwed end to be fitted with washers and one hexagonal or square exceeding 3 cm but not exceeding 5cm long, complete all as specified and as directed.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) (Fencing post) finished even and smooth, complete all as specified and as directed.

Taking down bush/plant in roof side, wall and any position in the existing bldg portion removing the all root on wall complete with the satisfication of Engr-in-charge and after removing the root the whole area will be sprayed with acid in the and making good distrubed area with PCC/Plastering etc., complete all as directed.

Dismantling, structural steel work, including doors, gates etc., complete all as specified and as directed.

S&F framed work as in door or gates ornamental type of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to br prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering runing rails and guides) including forging item (tersule etc) and hanging also fastening and fixing Conforming to Fe 290.Gde E165, complete all as specified and as directed.

S&F for mild steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to relvent IS with applying one coat of zinc chromate primer, complete all as specified and as directed.

S&F mild steel flat iron work as in wind tie including securing with nut and bolts, complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring benching to drain, coping, etc and the like edge slightly rounded or chamfered including necessary use and waste of form work, complete all as specified and as directed.

M&L providing 35 mm thick pre-cast cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in louvers & jallies (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:4, complete all as specified and as directed.

M&L providing precast concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in RCC jali post setting in mortar 1:6, complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, wall, aprons etc laid dry or laid dry and pointed, complete all as specified and as directed.

M&L for18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wall cladding and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 10mmthick rendering in CM 1:4, complete all as specified and as directed.

M&L for 5 cm thick sand stone slabs as in chajjas n.exc 2m in length punched dressed on face and along exposed edges ,self faced on other side and set and pointed in cm 1:4, complete all as specified and as directed.

M&L for 20-25mm thick Jodhpur stone tiles as in wall cladding fixed conplete over and incl 10mm thich cement plaster in CM 1:4, complete all as specified and as directed.

S&F 6 mm thick asbestos cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and as directed.

Note :- (i) Contract Sum shall be arrived at after deduction of amount of Schudule of Credit.

M/S KAUTILYA GARG

Nikhat nirman

mahalaxmi enterprises