Providing of Modular Kitchen in FD Type and FC Type Quarters at Senior Officers Enclave HAL Bangalore

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Year of Estblishment of Company/Business

If Other, please specify

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

PAN no and Name of Holder

PF number (If any)

ESI number

Goods and Service Tax ID No.

Contact details

Registered Contractor

Pls Enter

I.T Returns for past 03 assessment years

Turnover during the following 5 years (In Rs. Lakhs)

Pls enter Finiancial Turnover in Rupees Lakhs for all the years

DETAIL OF WORK ON HAND UPTO N-Months (N-contract period) [For Bid capacity calculation] NOTE : CA certified statement as per below format to be uploaded.

Name of Organization with address

Work Schedule for completion of works with in stipulated time [Please enclose action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)]

Bank(s) details: [Copy of ECS and cancelled cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Bank Statement for past three month

Latest Overdraft Facilties with Bank enter Name of Bank, Date of Issue and Value of Over Draft

Solvency Certificate Details

Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender. [Work experience certificates / Completion certificates should be uploaded for verification]. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost. [Amount put to the Tender]

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Type of Work and Organisation name [ Incase of private works the same shall be supported with TDS certificate]

Related Document to be Uploaded to eProcurement Portal

DEAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficant separate sheet to be uploaded with the same format as below)

Name of members or technical personllel avalable in the organization

DETAILS OF MACHINERY AVAILABLE

Name of Mechinery

Concrete Mixers - Type etc

Vibrators - Diesel - Electrical

Weiding equipment's

a) Rectifiers

b) Welding Generators

Erection equipment's

Cranes-

Hoists-

Lifts-

Water Lifting motor pumps

a) Diesel

b) electric

Drilling Equipment's

Compressors

Trucks

Stone crushers

Bitumen hot mixture plant

Bitume boiler

Rollers

Batching plants

Vibratory rollers

Generators

Cranes-Details

Concrete pumps

Road Pavers

Rock breakers

Transit mixers

Excavators

Weight batches

Others

DECLARATION

Pls enter

EMD details

Enclosed / Not enclosed

Enclosed

Average annual financial turn over during the last 3 years, ending 31st March 2025 and details for last 5 years to be provided to assess the bid capacity. The values provided to be supported by uploading Balance Sheet along with Profit & loss account (In Rs. Lakhs)

Specification

Demolition of existing brick masonry built in cement mortar manually / by mechanically means including stacking serviceable materials within 50Mtrs. Lead, etc., all complete as directed by Engineer-in-Charge.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable mterial and disposal of unserviceable material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10mm to 25mm, etc., all complete as directed by Engineer-in-Charge.

Disposal of moorum / building rubbish / malba / similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, etc., all complete as directed by Engineer-in-Charge. Note - item to be applicable in urban areas having directions for restricted hours for movement / plying of load carrying motor vehicle of 3.5Cu m or more, etc., all complete as directed by Engineer-in-Charge.

Dismantling 15 to 40mm dia G.I. pipe Internal Work including stacking of dismantled pipes (within 50 metres lead), etc., all complete as directed by Engineer-in-Charge. [Internal Work- Exposed on wall]

Taking out existing wooden door shutter, repair by cutting, painting etc.and refixing of repaired door shutters to existing door frames, includingreplacement of hinges with screws, etc. as required, etc., all complete as directed by Engineer-in-Charge.

Cement mortar (1:6) plastering 20mm thick for brick/concrete surfaces, finished smooth with trowel including lime rendering for interior faces of walls surfaces including scaffolding, curing, etc., all complete as directed by Engineer-in-Charge.

Providing and laying Antiskid Vitrified tiles Matt / Gloss finish of size [600 x 600]mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.30kg/Sq m including grouting the joints with white cement and matching pigments, etc., The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kgs per Sq m, including pointing in white cement mixed with pigment of matching shade, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing wooden cabinet of 60cm depth using 18mm thick BWR / Termite proof plywood board (8mm thick with one side lamite for rear surface fixed on wall) with both sides laminated with 1mm thick colour sheets of glossy / matt finish (machine pressed) of approved manufacturer for vertical and horizontal shelves fixed with SS Baskets and front exposed face with coloured sheets including handles, hydraulic / soft touch hinges, necessary screws, etc., all complete as directed by Engineer-in-Charge. Note: SS baskets will paid seperately under relevant item

Providing and fixing wooden crockery unit of 30cm deep using 18mm thick BWR/Termite proof plywood board (8mm thick with one side lamite for rear surface fixed on wall) with both sides laminated with 1mm thick colour sheets of glossy finish(machine pressed) of approved manufacturer for vertical and horizontal shelves, front doors and exposed face laminated with coloured sheets and glazed shutters with 5mm thick glass including handles, hydraulic / soft touch hinges, necessary screws, etc., all complete as directed by Engineer-in-Charge. Note: SS baskets will paid seperately under relevant item.

Supplying and fixing following Stainless steel kitchen baskets of heavy gauge and 304 grade of approved manufacture with necessary screws, etc., all complete as directed by Engineer-in-Charge.

Cultlery basket [60 x 50 x 10]cm

Cup & Saucer [60 x 50 x 10]cm

Plain basket [60 x 50 x 20]cm

Thali basket [60 x 50 x 20]cm

Providing and fixing Granite stone slab of colour black, Cherry / Ruby red 18mm thick & Area of slab over 0.50Sq m gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over cement based high polymer modified adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. The joints shall be treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish, etc., all complete as directed by Engineer-in-Charge.

Extra for fixing marble / granite stone, over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin based adhesive, including cleaning, etc., all complete as directed by Engineer-in-Charge.

Extra for providing opening of required size & shape for wash basin / kitchen sink in kitchen platform, vanity counter and similar location in marble / Granite / stone work, including necessary holes for pillar taps, etc., including moulding, rubbing and polishing of cut edges, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, etc., all complete as directed by Engineer-in-Charge. Concealed work, including cutting chases and making good the walls, etc.,

20mm dia

Supplying and fixing stainless steel A ISI 304 (18/8) Kitchen sink with drain board of size [510 x 1040]mm bowl depth 250mm, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 15mm dia C.P. brass fancy type Swan neck pillar taps of approved manufacture conforming to IS standards and weighing not less than 810gms, etc., all complete as directed by Engineer-in-Charge.

Distempering with 1st quality acrylic distemper (ready mixed) for old work one or more coats having VOC content less than 50gr/ltr of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour, etc., all complete as directed by Engineer-in-Charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work, etc., all complete as directed by Engineer-in-Charge.

Supplying, mixing and placing in position in suitable 1:2:4 Cement concrete for flooring (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), including finishing, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 of 15mm nominal bore, etc., all complete as directed by Engineer-in-Charge.

Rupees One Crore Forty Lakh Fifteen Thousand One Hundred Forty Five and Three Paise Only

Supplying and fixing brass batten/angle holder including connection etc. as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Single light point (Group B)

Exhaust fan point (Group B)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16A modular switch, connections etc. as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

2 X 2.5 sqmm + 1 X 2.5 sqmm earth wire ( For Lighting Ckts)

2 X 4 sqmm + 1 X 4 sqmm earth wire ( For Power Ckts)

2 X 6 sqmm + 1 X 6 sqmm earth wire

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 Way SPN MCB DB (Double door)

Supply and fixing 6A to 32 A rating, 230/415V 10kA, "C" curve, miiniature circuit bracker suitable for inducive load of following poles in the exesting MCB DB complete with connections, testing and commissioning etc., as required.

32A DP MCB

10A SP MCB

16A SP MCB