REPAIR TO FLOOR, WALL, PLUMBING AND SANITARY FITTINGS AT BK- 7 OBLIQUE 6, 7, 9 OR MD ACCN UNDER AGE (I) AYODHYA CANTT

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles from site and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, laid in flooring etc over & including 15mm thick screed bed in cement mortar in (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular), area of each tile not exceeding 0.36 sqm, laid in flooring etc over & including 15mm thick screed bed in cement mortar in (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed by Engr-in-Charge.

M&L for joint free glazed coloured ceramic tiles of size 600mm x 300mm x 9mm thick (as approved by Engr-in-Charge) in vertical surfaces as in dado/ skirting over & including10mm thick backing coat in cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed by Engr-in-Charge.

S&F in repair, vitreous china wash down water closet squatting pan (Orissa pattern) of size 630X450mm, white (excluding flush pipe, flushing cistern) including connection to trap and flushing pipe anti-syphonage pipe etc and making good floor to match the existing floor complete all as specified and directed by Engr-in-Charge.

S&F in repair, PVC low level flushing cistern 10 Ltr capacity syphonic action type, white with inlet ball valve float and handle including brackets and PVC flush pipe 32mm dia low or high density for low level cistern complete all as specified and directed by Engr-in-Charge.

S&F in repair, chromium plated shower roses with or without swivel joints, size 125 mm dia including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge.

S&F in repair, 15mm dia and 450mm long PVC connection pipe with PTMT nuts at both ends, complete all as specified and directed by Engr-in-Charge. .

S&F in repair, 15 mm bore dia bib cock fancy type chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified and directed by Engr-in-Charge.

S&F in repair, 15 mm dia bore pillar taps, cast copper alloy, with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair, 15 mm dia bore concealed stop valve, cromium plated with long shank and cup, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed down both ends for iron pipe including making good the disturbed surfaces complete all as specified and directed by Engr-in-Charge.

S&F in repair, viterous china wash hand basin flat back of size 550 x 400mm, white including 32mm bore waste coupling, PVC down pipe of 32 mm bore and brackets complete all as specified and directed by Engr-in-Charge.

S&F in repair, 15 mm dia bore angle valve / stop valves with wall flange, cast copper alloy, fancy type, cromium plated, screwed down both ends for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair, stainless steel grating 100mm square/round with or without hole complete all as specified and directed by Engr-in-Charge.

Dismantling of PVC water storage tank exc 250 but not exc 500 ltrs capacity and removing to store complete all as specified and directed by Engr-in-Charge.

S&F 500 ltrs capacity Rotational moulded polythene water storage tank in three layers (cylindrical vertical with close top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engr-in-Charge.

S&F in repair, 20 mm bore PTMT ball valve high pressure (Minmum weight 210 gms) with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair, 25 mm bore PTMT ball valve high pressure (Minmum weight 455 gms) with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

Taking up or down 15mm dia bore steel tubing and connection and removing the same from site / keeping aside for reuse complete all as specified and directed.

Taking up or down 20mm dia bore steel tubing and connection and removing the same from site / keeping aside for reuse complete all as specified and directed.

S&F 15mm dia bore steel tubing, medium weight, ISI marked, galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia bore steel tubing, medium weight, ISI marked, galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F in repair, 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality one side decorative lamination and other side plain white color to make kitchen cabinet/drawer/cupboard shutters fixed with screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed .

S&F in repair, 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality both side plain white color to make kitchen cabinet/drawer/cupboard shutters fixed with screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed .

S&F 40 mm width (when open) continuous (piano) hinges mild steel bright finish or electrogalvanised complete all as specified and directed by Engr-in-Charge.

S&F magnetic catcher of size 20 mm X 50 mm, suitable for cupboard shutter complete all as specified and directed by Engr-in-Charge.

S&F in repair, plastic water closet seat cover, coloured / white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging devicecomplete all as specified and directed by Engr-in-Charge.

S&F in repair, 600mm long PVC connection pipe with PTMT nuts at both ends, complete all as specified and directed by Engr-in-Charge. .

S&F in repair, 32 mm dia bore brass bottle trap for WHB, chromium plated, having minimum water seal 25 mm complete all as specified and directed by Engr-in-Charge.

M&L for repairs to existing wall mixer 3 in 1 / center hole basin mixture including replacement of defective parts such as leg, extension nipple etc complete all as specified and directed by Engr-in-Charge.

S&F in repair, chromium plated health faucet for pedestal pattern WC, screwed down, high pressure including 1.00 m long flexible CP pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair, chromium plated jet for pedestal pattern WC with 1.00 m long flexible pipe, screwed down, high pressure complete all as specified and directed by Engr-in-Charge.

S&F in repair, 15 mm dia bore brass CP mixer for mixing hot and cold water, screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair, 32mm bore PVC waste pipe for WHB, complete all as specified and directed by Engr-in-Charge.

S&F in repair, 40mm bore PVC waste pipe for kitchen sink, complete all as specified and directed by Engr-in-Charge.

Supply only 75 mm dia oval shape brass handle fancy type polished bright finish complete all as specified and directed.

S&F in repairs, drawer side channel of standard size including roller for moving drawer, mild steel bright finish or electrogalvanised, width of flap 30mm for modular kitchen complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering cement mortar (1:4) on fair faces of brick work (external surfaces), finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper after applying 1mm thick wall care putty to obtain smooth surfaces, complete all as specified and directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, head, shoes, bends, swan-necks etc includng cleaning for removal to store (measured overall as fixed along the centre line over fittings) and S&F new 75mm dia bore PVC (SWR) pipes, single socketed, fixed in any length with rubber ring joints on walls with and including PVC clamp complete all as specified and directed.

S&F in repair, 75mm dia bore PVC floor trap with grating complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness, laid dry in floors, aprons etc complete all as specified and directed.

M&L for 20mm thick Granite stone slab of any type, work table rubbed and polished, laid in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, stainless steel sink with drainage board made of 1mm thick stainless steel sheet including bedding in cement mortar to dwarf wall or fixing M S cantilever brackets of size 25mmx25mm x4mm duly painted and connecting union to pipe, overall size of 915 mmx460mm, bowl size 410mx330mmx160mm including PVC waste pipe of suitable dia and length complete all as specified and as directed by Engr-in-Charge.

S&F in repairs, stainless plate rack of size 900mmx900mm x250mm, fixed to wall with PVC rowl plugs and screws of suitable size or fasterners to fix on wall including taking down of old damaged plate rack of any pattern, complete all as specified and directed by Engr-in-Charge.

S&F factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door / window / ceosetory window and other frame / chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder / rice husk / wheat husk and non toxic additives) maximum toxicity index of 12 for 100 grms complete all as specified and directed by Engr-in-Charge.

S&F 30 mm thick factory made single extruded WPC wood polymer composite and decorative type flush door shutter, comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre (wood powder / rice husk / wheat husk and non toxic additives) maximum toxicity index of 12 for 100 grms complete all as specified and directed by Engr-in-Charge.

S&F 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.

S&F 150mm size aluminium handle extruded type, anodised complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size butt hinges medium weight, cold rolled, mild steel complete all as specified and directed by Engr-in-Charge.

S&F 250 mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted section and fixing bolts and sliding bolts of sxtruted section or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge.

S&F 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commericial type on both sides complete all as specified and as directed by Engr-in-Charge.

S&F 35mm thick 2nd class HW glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc (any number of sash bars), edges of framing plain chamferred or rounded fitted with mitred beads for securing glass etc, sizes of members of shutter as specified in SSR Part-I, Section 8, Clause 8.20 (a), fitted to chowkhat, complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture of 1.40 mm, fixed with stainless steel staples, complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium sections in any type of doors, windows and ventilators etc including fabrication of frame shutter and fixing with necessary glazing clips, joining cleats etc, complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engr-in-Charge.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing with beading n.exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.

M&L for mild steel framed work such as grills, grating, doors or gates etc of angle with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, frame work of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed by Engr-in-Charge.

S&F in repairs, 20 mm dia bore gun metal globe or gate valve, ISI marked, wheel head cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-Charge.

M&L for preparing old decorated surfaces of walls by complete removal of existing decorative treatment of any description including steel wire brushing, scraping etc and applying two coats of white wash complete all as specified and directed by Engr in Charge.

M&L for preparing old decorated surfaces of walls by complete removal of existing decorative treatment of any description including steel wire brushing, scraping, stoping etc, applying wall care putty of thickness not less than 1mm, sand papering the surfaces to achieve smooth surfaces and applying two coats of oil emulsion distemper, white or tinted complete all as specified and directed by Engr in Charge.

S&F in repair, looking mirror 5 to 6 mm thick fixed on 8mm thick commercial decorative water proof ply wood with coloured PVC frame all around of shade as approved by AGE(I) and hook, fixed in any size complete all as specified and directed by Engr-in-Charge.

Demolition of cement Concrete in ground floors and pavings n.exc 15 cm thick (below or above ground level) including chequered tiles and Paver blocks etc complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) in roof padding / levelling course including finishing the surfaces fair & even complete all as specified and directed by Engr-in-Charge.

M&L for 10mm thick screed bed/ rendering in cement mortar (1:3) over roof slab, mixed with & including water proofing compound as per manufacturer’s instructions, finished even & fair complete all as specified and directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces of roof slab including cleaning the surface using wire brush / pressure hose and applying high performance polyurethane liquid membrane roof casting cold applied in two coats @ 1.5 Kg/Sqm applied with spray / brush an elongation of 300% to 700% and tensile strength not less than 3N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging ability of 3.5 mm as per ASTM C 1305, shore a hardness of not less than 60as ASTM D 2240. The item includes epoxy primer applied @ 0.15 Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufacturer's instructions and sound engineering practice complete all as specified and directed by Engineer-in-Charge.

Jaya Construction (BID ID -3322509)

M/s Sultan Khan (BID ID -3314759)

SAI RAM ASSOCIOATES (BID ID -3321589)

ABC CONSTRUCTION CO. (BID ID -3322262)

D K Engineers and contractors (BID ID -3315213)