REPAIRS, RESURFACING OF INTERNAL ROADS, REPLACEMENT OF ROAD FURNITURE AND ALLIED WORKS AT VARIOUS LOCATIONS AT MIL STATION BHUSAWAL UNDER GE (S) AHILYANAGAR

Amount

M&L for premixed bituminous macadam laid using mechanical paver for any width of road, rolled & compacted to required gradient and camber ( consolidated thicknes 75mm or less) with binder content ( paving bitumen of VG-30 grade bitumen ) of min 4% by weight of total mix complete all as specified and as directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) confirming to IS: 8887 at a rate application of 2.50 Kg / 10 Sqm on bituminious surface as specified in table 500-5 of MORTH Specification for road and bridge works 2013 ,using mechanical sprayer after cleaning of existing surface complete all as specified and as directed.

M&L for premixed bituminous semi - dense asphaltic concrete 30mm consolidated thickness laid using mechanical paver for any width of road with min 5.00% binder content paving bitumen VG-30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and as directed.

M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.0 mm thick single coat as a centre line or edge line etc, road marking n exc100 mm width using thermo plastic paint (Hot application) white/yellow by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter fillers etc, thermoplastic requirement for glass beads shall be confirming to BS-6086 of most specification including spraying of glass beads etc complete all as per manufacturer's instructions and complete as all specified and directed.

S&F for road side convex mirror for road safety with installation kit & adjustable fixing bracket (nuts & Bolts), ISO Certified 9001:2015, of size 800mm dia, made up of polycabronate, mounted on MS pipe of 2.1m long and dia of pipe is 80mm including two coat of synthetic enamel paint over a coat of zinc chrome primer in MS pipe including necessary excavation and earthwork in any type of soil, RFR, removal and for fixing and embedding the MS pipe on ground with hold fast using PCC (1:2:4) type B1 using 20mm graded aggregates (block size 0.3m x 0.3 m x 0.45m below GL) and proper grouting, Including taking down existing complete all as specified and directed by the Engr-in-Charge.

Supply and fix solar cat eye aluminum alloy shank (100% water proofing design) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystaline solar panel 2.4V/ 0.3 watt one NI-Led rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. incl taking out existing cat eye complete all as specified and directed .

S&F Solar Delineator 80mm dia, 145mm high made out of poly carbonate clear, U.V resistant protected with mesh, solar panel of monocrystalize - 2.5 volt/300 MA battery 02 nos x 1.2 volt, 1600MAH, blinking type red color with back up minimum 36 hrs and pole height 1mtr, including embedding in PCC 1:2:4 (150x 150 x 300mm) including taking out existing delinator complete all as specified and directed

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufacturers instructions complete all as specified and directed.

Demolition of cement Concrete (Unreinforced) any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Framed work such as cattle trap, grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including 40X3 mm clips & nut bolt for fixing complete all as specified and directed.

M&L for Plain cement concrete 1:2:4, Type B-2, (using 40 mm graded corase aggregate) as in surface channels and drains including form work complete all as specified and directed

Demolition of brick/ block/ stone masonry built in cement mortar or cement lime mortar of any description.

M&L for brickwork with old size fly ash bricks straight or curved on plan with mean radius exc 6m built in CM 1:6 complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete etc. all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work /concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement complete all as specified and as directed.

Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc complete all as specified and as directed.

M&L for Precast cement concrete interlocking tiles (glossy finish/ rubber mat finish) of 80 mm thick, hydraulically pressed cemented tiles of grey colour with pigments, (glossy finish/ rubber mat finish) factory made, M-40 grade conforming to IS-15658-2006, as in floor/hard standings laid over & including 25 mm thick sand cusion and including filling of interstices with fine sand complete all as specified and as directed. (Note : Size, shape, colour & pattern of tiles shall be as approved by GE).

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete including demolition of existing kerb stone all as specified and as directed.

M&L for cement concrete 1:2:4 type B-0 (20 mm graded stone aggregate)as in copings, complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:4:8, type D-2 using 40 mm graded stone aggregate as in sub base of flooring all as specified.

S&F Mild steel bolts purpose made with hexagonal or square head at one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, Exc 30cm long complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down existing pipe all as specified and as directed.

M&L for preparation of newly plastered or unplastered of wall surface/ kerb stone etc, and applying two coats of acrylic exterior emulsion paint over a coat of primer all as specified and as directed.

JANARDHANANDSONS (BID ID -3499451)

M/S H.N.ENTERPRISES (BID ID -3495770)

M/S K. K. ENTERPRISES (BID ID -3497040)