Construction of 1 Nos F type Qtr. Building at J.Uchhala PHC for the year 2025-26

Earth work in excavation of foundation in hard soil with all leads and lifts including dressing the sides and levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P,royalty etc. complete and as directed by the Engineer-in-charge.

Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge.

Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge.

cement concrete PCC (1:2:4) with 12mm size (C.B.) broken hard granite chips including hoisting and laying per 1cum etc complete.

Fly Ash brick masonry in cement mortar (1:6) on foundation and plinth using bricks of 9” size having a crushing strength of not less than 35 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks for six hours in waters before use with all necessary projections, splays cutting, circular moulding, chamfering, corbelling, watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge.

Providing 2.5cm thick Damp Proof Course with cement concrete (1:2:4) using 12mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of wall including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

R.C.C. work with M-20 grade In Different Works having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position. Column footing ground floor.

R.C.C. work with M-20 grade In Different Works having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position.Plinth Beam. Ground floor.

R.C.C. work with M-20 grade In Different Works having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position.Column shaft & beam Ground floor,

R.C.C. work with M-20 grade In Different Works having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position. Lintel Ground floor.

R.C.C. work with M-20 grade In Different Works having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position. Chhaja 65mm thick. ground floor.

R.C.C. work with M-20 grade In Different Works having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position. Shelve 50 mm thick ground floor.

R.C.C. work with M-20 grade In Different Works having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position. Roof beam.

R.C.C. work with M-20 grade In Different Works having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position. Roof slab.

Supplying fitting, with Straightening, cutting, bending, cranking, hooking, welding or jointing (if required) the HYSD steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works and for providing cost, conveyance and taxes of M.S. rods or Tor steel including binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. completefor ground floor or as directed by the Engineer-in-charge.

Fly Ash brick masonry in cement mortar (1:6) on Supperstructure using kiln Burnt bricks of 10” size having a crushing strength of not less than 75 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks for six hours in waters before use with all necessary projections, splays cutting, circular moulding, chamfering, corbelling, watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge.

Fly Ash brick masonry in cement mortar (1:4) on Superstructure using kiln Burnt bricks of 10” size having a crushing strength of not less than 75 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks for six hours in waters before use with all necessary projections, splays cutting, circular moulding, chamfering, corbelling, watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge.

Providing 16mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Supplying, fitting, fixing of tile in floors marbonite or equivalent make in all floors using Vetrified tile over 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Fixing vetrified tiles in dados of size 0.3mx0.3m with 12mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing and polishing etc. complete.

Providing and fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5 mm reflective with cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlins frames of doors windows ventilabour and beams.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.32mm thick. (both side 1mm th. laminate, Teak wood leapping and glass pannel including all S.S. hardware fittings)

Supplying,Fitting and fixing of two track UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame shutters and all fitting and fixtures

Supplying of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials etc.complete as per the instruction of Engineer-in-Charge .

Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Finishing surface of walls with Acrylic putty (water based) of approved make & finished smooth & even surface to receive painting incluidng cost of materials taxes labour etc.

Distempering two coats to walls with distemper of approved shade on new work. including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Painting two coats to new Iron work with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing, fitting & fixing of Granite tiles on dado including of all cost, conveyance etc all complete.

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard )

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group B.

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group C .

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group B .

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group C .

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group B.

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) S/F of Angle holder replacing Ceilling Rose.

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board .

S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required

S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC

S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover.

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 4 Modular box with base & cover.

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 8 Modular box with base & cover.

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 12 Modular box with base & cover.

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1).

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x2.5+1x1.5 (1.8.2).

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x4+1x1.5 (1.8.3).

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x6+1x2.5 (1.8.4).

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard)Inverter wiring (1x1.5smm) Copper wire (1.19.1).

S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)

S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the 2 Way double door MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b)

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of MCB 12 way Single door (1.3.3).

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) . S/F of 63A. DP MCB Changeover on 2way single door DB

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17).

Supply, Installation, Testing & Commissioning of exhaust fan upto 300 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43)

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.

S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL

Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Millenium/Crompton-Jura /Anchor-XL/Havels-Velocity/Spark/Orient-Summer pride )

Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Millenium/Crompton-Jura /Anchor-XL/Havels-Velocity/Spark/Orient-Summer pride )S/F step type fan regulator.

Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Millenium/Crompton-Jura /Anchor-XL/Havels-Velocity/Spark/Orient-Summer pride )S/F of 15mm dia down rod with all accessories (1.35+1.40).

Supply & fixing of superior type C.I bulk head fitting with 9W Led Bulb for general domestic use ISI marked square / oval type with premetallic glass cover provided with galvanized steel wire guard including necessary connections. ( M-5 )

Supply & Fixing of 30-35Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)

Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)

Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.

S/F of 6 sqmm twin core unbonded aluminium service connection wire with no.10 G.I. Guard wire to support the aluminium wire

S/F of 6 sqmm twin core unbonded aluminium service connection wire with no.10 G.I. Guard wire to support the aluminium wire S/F of 12w Watt LED Bulb.

Area lightings Supply & Installation 40 W AIO Solar street lights having 100 Wp or more highly efficient Monocrystalline PV module & 12.8 V 42 Ah or more ) Lithium Ferrophosphate (LiFePo4) Battery having BIS ) which shall be inside the extruded aluminium luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be> 6400 lumen or more in CCT 6000K (+/-500K) (Lumen efficacy of 160 lm/w ) as per LM 79 report of NABL lab . The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24 Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) to be mounted on the top of the luminaire housing. The luminaire must be having IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) . The AIO street light is having IK 08 .The luminaire should have the provision the tiltable/ adjustable mounting bracket to mount it on the top of the pole directly. Warranty on the AIO street lights must be 5 years . The following test reports/certifications must be submitted for the technical acceptance of the products . 1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 Report of NABL lab (Make-Panasonic Havels/Crompton/Philips/Wipro).

Supply of 7 mtr long hot dip galvanized Octagonal pole having base dia of 175 mm and top dia of 70 mm and plate thickness of 4 mm or more complete with base plate and 4 nos. Jtype En 8 grade foundation bolts M24X750mm to withstand 180 KM / HR wind speed considering the weight. Solar lights fixed on the top of the pole . AIO Integrated Solar lights . One no of AIO Solar lights at a height of 7 mtr above ground .Both the Octagonal pole, En8 grade fdn bolts and bracket must be manufactured in the Octagonal pole manufacturing company. ( Bracket & En8 grade Fdn bolts manufactured by third party pole supplier/manufacturer shall not be acceptable). Make:- Utkarsh/RR Ispat/Vakrangee .

Earthwork in all kinds of soil with in 50mtr initial lead & 1.50mtr initial lift including rough dressing & breaking of clods to maximum 5cm to 7cm & laying in layers not exceeding 0.30mtr in depth & as per the direction of E.I.C.

Earthwork in all kinds of soil with in 50mtr initial lead & 1.50mtr initial lift including rough dressing & breaking of clods to maximum 5cm to 7cm & laying in layers not exceeding 0.30mtr in depth & as per the direction of E.I.C. above 1.5 mtr.

Supplying allmaterials,labour,T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite,payment of royalty,taxes etc.all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing cc(1:3:6)with 40mm HG metal including watering, curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HBG chips including watering,curing and conveyance of all materials to site payment of royalty,taxes etc all complete as per direction of the E.I.C.

Supplying all materials,labour,T&P and providing Brick work with K.B.Brick having crushing strength not less than 75kg/cm2 with dimensional tolerence of +/-8% in cm(1:4)including watering,curring, conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per P.H specification and direction of E.I.C.

Supplying all labour,T&P and providing 50mm thick precast RCC bafflewalls in cc(1:1.5:3)with 12mm size bhg chips fitted&fixed in position and finished smooth etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling then after casting including conveyance of all materials to work site payment of royalty taxes etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing MS reinforcement for RCC work including cutting, bending,binding and tying the grills and placing the position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site payment of royalty,taxes etc all complete as per direction of E.I.C.

Supplying all materials,labour,T&P and providing RCC(1:1.5:3)with 12mm size bhg chips for RCC works including hoisting,laying,watering,curring,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per the direction of E.I.C.

Supplying all materials,labour,T&P and providing 12mm thick CP in cm(1:3) with punning on brick work including watering,curing,conveyance of all material to worksite,payment of royalty,taxes etc all complete as per direction of E.I.C

Supplying all materials,labour,T&P and providing 550x550x100mm thick RCC precast M.H cover in cc(1:1.5:3)using 12mm size hbg chips,placing the cover on the MH/S.tank & finishing smooth etc all complete including watering,curing,conveyance of all materials to work site,payment of royalty,taxes etc all complete as per the specification and direction of E.I.C.

Filling in F&P with excavated materials including watering and ramming as per the direction of E.I.C.

Supplying all materials,labour,T&P and fixing ceramic tiles/marble tiles/chequered tile in floor,tread and landing on 25mm thick bed of cement slurry mixed with pigments to match the shades of the tile including rubbing and polishing complete as per the specification & direction of E.I.C. .

Supplying all materials,labour,T&P and fixing porcelain glazed tiles/marble tiles/kota tiles/kodappa tiles on 12mm thick CP(1:3)jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per the direction of E.I.C.

Providing fitting, fixing of Al. door with OELanodized Al. door section of 9202 as verticla member, 9201 as top meber and 9200 as bottom and middle member and 12 mm thick pre-laminated board fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No.1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete.

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C. 110mm dia PVC pipe.

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C.160mm dia PVC pipe .

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C.110mm dia PVC'P' trap.

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C.110mm dia.PVC S/J/D.

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C.110mm dia.PVC Door Bend.

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C.110mm dia PVC Plain Bend.

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C.110mm dia PVC Tee.

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C.75mm dia. PVC pipe.

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C.75mm dia. PVC Plain Bend.

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C.110mm dia PVC SWR Nanhi trap without jally .

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C.110mm dia PVC offset.

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C110mm dia PVC Cowl.

Supplying all materials, labour, T&P and fitting & fixing of OD-UPVC SWR) soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C125mm dia CP greatings.

Supplying all materials,labour,T&P and cutting holes through brick/stone masonry wall for taking PVC pipes and fittings including making good the damages etc.all complete as per the P.H. specification and direction of E.I.C. 250mm thick wall.

Supplying all materials,labour,T&P and cutting holes through brick/stone masonry wall for taking PVC pipes and fittings including making good the damages etc.all complete as per the P.H. specification and direction of E.I.C.Roof cutting.

Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking GI/PVC pipes and making good the damages as per the direction of E.I.C

Supplying all materials,labour T&P and fixing wash down water closet(E.W.C) of ISI mark of with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C. (Parry ware/ Hind ware/cera/Equivalent)

Supplying all materials,labour,T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C.

Supplying all materials,labour,T&P for fixings water closet,squatting pan (I.W.C pan/Orissa pattern squatting pan)dully embedded in CC(1:5:10) using 4cm h.g. metal all complete as per the direction of E.I.C. (Hindware/Parryware/Cerao/Equivalent)

Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C. (Parry ware/Hind ware/cera/Equivalent)

Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size HG metal on bed,1st class K.B brickwork in cm(1:6),moulding&shapping the channel inside & benching with cc(1:1.5:3)using 12mm size HG chip,12mm thick cp(1:3) with punning to inside,cement flush pointing(1:3) to outside,RCC coverslab in cc(1;1.5:3)using 12mm size HG chips with RCC MH cover in excavation in all kinds of soil & refilling the cavity around the chamber including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per approved specification & direction of the E.I.C.

Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and aound trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.

Supplying all materials,labour,T&P and laying of 110mm dia. PVC pipes,in trenches (to level or slope) and jointing with supply of approved rubber lubricant by non heat application method using 40mm bhg metals on bed of the trench and hunching or allround concrete encasing with cc(1:4:8)using 40mm size h.g metal including curing,conveyance of all materials to worksite,payment of royalty,taxes etc. and testing all complete as per approved drawing,design,specification and direction of E.I.C.110mm dia PVC pipe with allround encasing.

Supplying all materials,labour,T&P and laying of 110mm dia. PVC pipes,in trenches (to level or slope) and jointing with supply of approved rubber lubricant by non heat application method using 40mm bhg metals on bed of the trench and hunching or allround concrete encasing with cc(1:4:8)using 40mm size h.g metal including curing,conveyance of all materials to worksite,payment of royalty,taxes etc. and testing all complete as per approved drawing,design,specification and direction of E.I.C.160mm dia PVC pipe with allround encasing.

Supplying all material,labour,T&P and constructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cm(1:6)for the remaining height at top,12mm thick CP(1:4)inside&outside over masonary brickwork gravel packing in the rear of well steining,RCC coverslab in cc(1:1.5:3)using 12mm size h.g chips fitted with iron lifting handles including earthwork in openwell excavation in all kinds of soil and refilling the cavity around the pit & painting the iron work,watering,curing,conveyance of all materials to worksite,payment of royalty, taxes etc.all complete as per approved drawing,specification and direction of E.I.C.

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank of conforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above G.L and placing the tank in required position including conveyance of all materials to worksite,payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000ltrs capacity water storage tank.

Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C. 25mm dia CPVC Pipe.

Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.25mm dia CPVC Pipe.

Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.

Supplying all materials,labour,T&P and cutting holes in RCC,floors,roofs,etc. upto 19cm thick for passing GI/PVC pipes and fitting etc and repairing the holes after insertion of pipes etc with cc(1:2:4) including finishing complete so as to make it leak proof as per direction of E.I.C.

Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking GI/PVC pipes and making good the damages as per the direction of E.I.C

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C.(hindware/parryware/Jaquar/Equivalent)) 15mm dia C.P Bib Cock(L.B)

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C.(hindware/parryware/Jaquar/Equivalent)) 15mm dia C.P Bib cock(S.B).

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C.(hindware/parryware/Jaquar/Equivalent)) 15mm dia C.P Two Way Bib cock.

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C.(hindware/parryware/Jaquar/Equivalent)) 15mm dia C.P Health Fuccet.

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C.(hindware/parryware/Jaquar/Equivalent)) 15mm dia C.P Pillar cock.

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C.(hindware/parryware/Jaquar/Equivalent)) 15mm dia Angle Stop Cock.

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C.(hindware/parryware/Jaquar/Equivalent)) 15mm dia Concealed Stop Cock.

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C.(hindware/parryware/Jaquar/Equivalent)) 15mm dia. C.P flange.

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C.(hindware/parryware/Jaquar/Equivalent)) 25mm dia P.V.C F.W.V.

Supplying all materials,labour,T&P and fitting and fixing 10Ltrs capacity PVC LL flushing cistern with a pair of C.I/M.S.brackets complete with fittings such as syphonic arrangement,15mm nominal size Brass/ PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet, overflow pipes,32mm dia PVC flush bend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C 10 lit PVC L/L Cistern (Parry ware/Hind ware/cera/Equivalent).

Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick AC. sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. Mirror with plastistic mounted frame rectangular shape 453x357mm.

Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.

Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C20mmx450mm long CP towel rail .

Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.CCP towel ring.

supplying all labour,T&P materials & fixing wash Kitcken Sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.

Supplying all materials,labour T&P and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of E.I.C.

Sinking of 125mmx100mm dia Tube well by fast drilling Sofasticated Rig.Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth rock with down the hole hammer drilling rig combination drilling rig as required to soil,the soil condition as per direction of E.I.C including supply of rigs with all accessories,T&P consumable etc for lowering 125mm dia PVC pipes for casing fitted with sockets,washers and without well screen as per the necessity for the soft,medium and hard formation(PCV/G.I)casing pipes for the over borden is to be provided by the contractor including lowering and drawing after complete of tube well.Tube well(1No)..Drilling of 125mm dia. Bore-0.00mtr to 30.00mtr.

Sinking of 125mmx100mm dia Tube well by fast drilling Sofasticated Rig.Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth rock with down the hole hammer drilling rig combination drilling rig as required to soil,the soil condition as per direction of E.I.C including supply of rigs with all accessories,T&P consumable etc for lowering 125mm dia PVC pipes for casing fitted with sockets,washers and without well screen as per the necessity for the soft,medium and hard formation(PCV/G.I)casing pipes for the over borden is to be provided by the contractor including lowering and drawing after complete of tube well.Tube well(1No)..Drilling of 100mm dia. Bore-30.00mtr to 70.00mtr.

Lowering the following G.I/PVC pipe confirming to ASTM-D-1785/89(sch-80) with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing material,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I) supplied by the contractor (including cost of pipe) Lowering of 125mm dia PVC pipes:00.00 mtr to20.00mtr .

Lowering the following G.I/PVC pipe confirming to ASTM-D-1785/89(sch-80) with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing material,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I) supplied by the contractor (including cost of pipe)Cost of 125mm dia PVC pipes:-00.00mtr to 20.00mtr

Cleaning and developing the tubewell with their own compressor contineously worked till clean and adiquate discharge is obtained from the tube well including supply of & use of all necessary equipments and labour as per the direction of E.I.C.

1.00H.P.Single Phase Submersible Pump Set Supplying of I.S.I.Mark 1.00H.P.Single Phase Verical Submersible Pump Set with discharge of 1800-2200 ltr./hour and a head of 45-60mtr of reputed make like KSB/Texmo & equivalent including all cost, conveyance and taxes etc all complete as per direction of E-I-C.

Supplying all labour,T&P and fitting and fixing of 1.00H.P Single phase vetrical Submersible Pump Set with commissioning and testing etc.all complete as per direction of E.I.C.

Supplying and fitting and fixing of I.S.I.mark D.O.L Starter of reputed make like BCH or equivalent for 1.00H.P Single Phase Submersible Pump including all cost,conveyance of all taxes etc all complete as per direction of the E.I.C.

Supplying and fitting and fixing of three core flat cable(1.5mm2) of I.S.I. make of reputed company like BCH/Finolex or Equivalent and connecting the pump and starter including all cost,conveyance and taxes etc all complete as per direction of the E.I.C.

Supplying and fitting and fixing of plastic rope MS Well cover,MS Clamp,stainless steel short piece,bend &socket including all cost ,taxes etc all complete as perdirection of the E.I.C.

Please Enable Macros to View BoQ information