NIT No. 349/TC/EinC/PWD/26-27

OFFICE OF THE EXECUTIVEENGINEER E/M DIVISION PWD DURG (C.G.)

TERMS & CONDITION

FOR Construction of Proposed Livelihood College Building I/C. Water Supply, Sanitary Fittings, Boundary Wall, approach Road & Electrification Works at Durg Distt-Durg (C.G.)

1. Electric installation shall be carried out in accordance with the General Specification for Electrical Works (Part - I Internal) & (Part - II Exlernal) 1972 of C.P.W. D. adopted by E- In-C M.P.W.D. Bhapal & also : Confider With Indian Electrical Rule 1956 as amended. Up to Date.

2. Civil contractor should Subler the Electrical Work only those Electrical contractor who are Registered in PWD for Electrical Work as following class.

(I) "D" Class Electrical Contractor - Up to 1.00 Crore

(II) "C" Class Electrical Contractor - Up to 2.00 Crore

(III) "B" Class Electrical Contractor - Up to 10.00 Crore

(IV)"A" Class Electrical Contractor - Unlimited

3. Contractor will submit along with final bill.

(a) Completion Certificate

(b) Completion Plan drawn to a suitable seale on tracing cloth with ink. Indicating Location of main switch , D.B. Circuit fitting and their location

4. The Contractor will be fully responsibility for any accident damages and losses occurred due to negligence of work. The amount of the losses and damages etc. Will be recovered from the Contractor.

5. The Contractor shall have his own tools and plants, helmet, hand gloves, first aid box and other safety measures. In good working condition for staff No. Extra payment shall be made for this arrangement and no Claims shall be paid by the department.

6. The Contractor himself shall be fully responsibility for any accident casualty of the staff if occurs due to Electrical fault or any other reason during the work and no claim will be paid for such accident of causality by the department.

7. The Contractor will be fully responsibility for taking all of safety measures during contract period.

(a) Electrical power supply arrangement temporarily at site will be made by contractor No payment will the made by PWD Department

(b) Earthing system should be installed in presence of A. E. (e/m)/ Sub Engineer (E&M)

8. Earth Continuity conductor of required size & material should be installed with entire run of wiring Earth nut bolt must be provided at all switch boards All metallic parts Ceiling fan tube fitting socket out let should be essentially connected to earth.

9. All Connection of ceilling fan, tube fixture, street light fixture shall be made by Core PVC/ Rubber sheathed cable of required.

10. The Civil contractor should have a Electrical Supervisor for Electrical works at site as per Norms of C.G./ M.P. Govt. who Electrical Diploma/ Degree Holder as Required as per PAC Amount.

NAME OF WORK :- Construction of Proposed Livelihood College Building I/C. Water Supply, Sanitary Fittings, Boundary Wall, approach Road & Electrification Works at Durg Distt-Durg (C.G.)

LIST OF APPROVED MATERIALS FOR ELECTRIFICATION WORK

S.No. Name of Item Make Remark

1 Flush type Switches/Sockets/ Power Plugs 5A/15/Amps, Angle Holder/Batlen Holder and Ceiling Roses 3 Plate 1. M.K.(Elements) 2. Hevell's (Febio) 3. Legrand (Myrious) 4.Schneider (Livia) 5. Anchor (Roma)

2 PVC Wires (Fire Ratardant) 1.5 Sqmm. / 2.5 Sqmm./4 Sqmm & 6 Sqmm. 1. RR cable 2. Polycab 3. KEI 4. Finolex

3 PVC Pipe & its accessories (a) 2 mm Thick for concealed wiring as well as for surface 1. Preciesion 2. BEC Plast 3. Plaza 4. Polycab

4 MCB/MCCB/DB/Main Switches/Change over Switches 1. Schneider 2. L&T 3. HPL 4.Havells 5 C&S

5 Armoured/Unarmoured Cable (Power Cable HD) 1. R.R. 2. Polycab 3. KEI 4. Finolex 5. Gloster

6 Ceiling fan 1200 mm / 1400 mm 1.Bajaj, 2.Havell's, 3.CROMPTON 4. Usha

7 Fresh air Fan/Exahust fan 300mm/380.. 1. Bajaj 2. Crompton 3. Usha 4. Havells

8 LED light (luminaries) LED Bulb & LED Street light fitting & LED flood light 1. Bajaj 2. Crompton 3. Philips 4. HPL 5.Wipro

9 Air Conditioner 1. Daikin 2. Mitsubishi 3. Voltas 4. Blue Star 5. Panasonic

10 Submersible Pump 1. Kirlosker 2. Crompton 3.CRI 4.Texmo

Sub-Division Officer Executive Engineer

PWD(E/M)Sub-Division Durg PWD (E/M) Division Durg

Nit for Construction of Proposed Livelihood College Building I/C. Water Supply, Sanitary Fittings, Boundary Wall, approach Road & Electrification Works at Durg Distt-Durg (c.g.)

PAC RS 409.22 LACS

S.No. DEPARTMENT SOR YEAR SOR NO. Item of work Unit Rate Qty. Amount

1 PWD BUILDING 2015 1.5 Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. sqm 1.90 3025.00 5747.50

2 PWD BUILDING 2015 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. 1.1.1) In all types of soil Cum. 185.00 4402.64 814488.77

3 PWD BUILDING 2015 1.6 Extra for every additional lift of 1.5 m or part thereof. 1.6.1) All types of soils Cum. 26.50 1900.21 50355.43

4 PWD BUILDING 2015 1.26 Carriage by mechanical transport upto 5 km lead: 1.26.1) Earth Cum. 111.00 4402.64 488693.26

5 PWD BUILDING 2015 1.10 Pumping out water caused by springs tidal or river seepage, broken water main or drains and like during Excavation or during Excavation and laying of base concrete (volume to be calculated taking height from water level to bottom of pit and to be measured and paid) . Cum. 146.00 421.30 61509.80

6 PWD BUILDING 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. Cum. 371.00 4991.02 1851669.16

7 PWD BUILDING 2015 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 3.1.3) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). Cum. 2970.00 433.33 1286985.65

8 PWD BUILDING 2015 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. (Note :Excess/ less cement used as per design mix is payable/ recoverable separately) 3.2.1) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4163.00 1784.40 7428443.46

9 PWD BUILDING 2015 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: 3.12.1) Thermo-Mechanically treated bars FE 415 kg 54.50 144098.54 7853370.43

10 PWD BUILDING 2015 2.1 Providing and fixing form work including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: 2.1.1) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. Sqm. 139.00 1774.52 246658.84

11 PWD BUILDING 2015 2.1.3 Window sills, anchor blocks, string course, bends, copings, bed plates and like. sqm 184.00 119.50 21987.08

12 PWD BUILDING 2015 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape Sqm. 297.00 2093.620 621805.14

13 PWD BUILDING 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) Sqm. 235.00 2697.81 633985.59

14 PWD BUILDING 2015 2.1.8 Beams, lintels, cantilevers & walls sqm 202.00 2114.55 427139.10

15 PWD BUILDING 2015 2.1.13 Weather shade, chhajja, Cornices and mouldings sqm 294.00 104.29 30661.26

16 PWD BUILDING 2015 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: 7.5.4) Cement Mortar 1:6 (1 cement : 6 coarse sand) cum 3263.00 497.53 1623430.60

17 PWD BUILDING 2015 3.4 Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work. ground floor cum 97.50 378.26 36880.35

18 PWD BUILDING 2015 3.4 first floor cum 195.00 352.89 68813.36

19 PWD BUILDING 2015 3.4 terrace cum 292.50 9.55 2793.96

20 PWD BUILDING 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: ground floor sqm 121.00 210.93 25522.41

21 PWD BUILDING 2015 7.6 first floor sqm 242.00 217.86 52722.12

22 PWD BUILDING 2015 7.6 terrace sqm 363.00 57.84 20994.11

23 PWD BUILDING 2015 7.11 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: 7.11.2) Cement Mortar 1:4 (1 cement : 4 coarse sand) sqm 382.00 836.39 319500.22

24 PWD BUILDING 2015 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: ground floor sqm 11.00 424.77 4672.51

25 PWD BUILDING 2015 7.12 first floor sqm 22.00 411.61 9055.49

26 PWD BUILDING 2015 7.20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. sqm 62.50 836.39 52274.19

27 PWD BUILDING 2015 11.2 Providing and making 12mm thick cement plaster of mix: 11.2.4) In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 91.50 3532.79 323250.28

28 PWD BUILDING 2015 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: 11.3.4) In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 107.00 2355.19 252005.76

29 PWD BUILDING 2015 11.42 Providing sand faced plaster to concrete or brick masonry surface in all positions in two coats, base coat 13mm thick in C.M. 1:4, cleaning the surface by combing it and finishing coat 8mm thick in C.M. 1:3 and taking out grains on surface by hand operated mechanical arrangement with cost of all material labour, all leads & lifts, and scaffolding etc. complete. sqm 180.00 2695.67 485220.42

30 PWD BUILDING 2015 11.1 Providing and making 6mm thick cement plaster of mix: 11.1.2) In Cement mortar 1:4 (1 cement : 4 fine sand) sqm 87.00 3387.26 294691.62

31 PWD BUILDING 2015 11.31 Providing and making 12mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) per cm width 11.31.1) Flush bands Rm 2.10 100.00 210.00

32 PWD BUILDING 2015 11.31.2 Sunk Bands Rm 2.60 100.00 260.00

33 PWD BUILDING 2015 11.31.3 Raised Band Rm 3.00 100.00 300.00

34 PWD BUILDING 2015 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height. sqm 86.00 2035.18 175025.82

35 PWD BUILDING 2015 12.74 Providing and fixing rectified glazed ceramic floor tiles of 1st quality conforming to IS:15622-2017 of approved make, in all colours, shades overs 20mm thick bed of cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with matching pigment complete. 12.74.2) Size 400x400mm thickness 7 to 8 mm sqm 826.00 229.88 189883.36

36 PWD BUILDING 2015 12.75 Providing and fixing rectified glazed ceramicWall/Dado tiles of 1st quality conforming to IS:15622-2017 of approved make, in all colours, shades overs 12mm thick bed of cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with matching pigment complete. 12.75.1) Size 300x450mm thickness 7 to 8 mm sqm 710.00 528.96 375561.60

37 PWD BUILDING 2015 12.45 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) 12.45.2) Granite stone black sqm 2646.00 487.81 1290745.26

38 PWD BUILDING 2015 13.6 15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. 13.6.2) Granite stone black sqm 3279.00 30.00 98353.61

39 PWD BUILDING 2015 12.46 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m) 12.46.2) Granite stone black sqm 2719.00 40.59 110364.21

40 PWD BUILDING 2015 13.19 Extra for providing edge moulding to 15mm thick stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 13.19.2) Granite work Rm 172.00 299.45 51506.09

41 PWD BUILDING 2015 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm) sqm 897.00 767.60 688538.10

42 PWD BUILDING 2015 12.36 Chequered terrazzo tiles 22 mm thick with graded marble chips of size upto 6mm in floors on 25mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including grinding rubbing and polishing complete. 12.36.2) Medium shade using approximately. 50% white cement and 50% ordinary cement. sqm 713.00 160.42 114375.90

43 PWD BUILDING 2015 12.79 Providing and laying DOUBLE/MULTI CHARGE (minimum 2.0mm thick layer) VITRIFIED floor tiles with water absortion less than 0.05% and conforming to IS:15622-2017 of 1st quality of approved make in all colours, shades and size mentioned below (+/- 10mm) laid on 20mm thick cement mortal 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. 12.79.1) Size 600x600mm thickness 9 to 10 mm sqm 1082.00 1698.16 1837403.71

44 PWD BUILDING 2015 13.24 Providing and fixing one side polished 25 mm thick RAJIM SAND STONE shelves fixed in walls in cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. 13.24.2) Both side polished sqm 414.00 124.74 51642.36

45 PWD BUILDING 2015 13.21 Extra for making opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including making necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. each 253.00 13.00 3289.00

46 PWD BUILDING 2015 13.17 Providing and fixing 15mm thick Granite (machine cut, table rubbed & mirror polished on both sides) for partition curtain in toilets or similar locations of required size in wall with cement mortar 1:4 (1 cement : 4 coarse sand) including cutting chase in wall and joint with wall treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. 13.17.2) Granite stone black sqm 2924.00 8.25 24123.00

47 PWD BUILDING 2015 12.6 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm 12.65.2) Pigment Coloured (rubber mould) precast interlock concrete blocks sqm 632.00 815.16 515177.96

48 PWD BUILDING 2015 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 18.76.2) 110 mm dia pipe. mtr 267.00 99.00 26434.07

49 PWD BUILDING 2015 18.77 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.. 18.77.1) Tee/ Tee with door/ Bend 45°/ Bend 90° 18.77.1.2) 110 mm each 154.00 20.00 3080.00

50 PWD BUILDING 2015 18.77.4 Access door cap 18.77.4.2) 110 mm each 59.00 20.00 1180.00

51 PWD BUILDING 2015 8.1 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. 8.1.2) Sal, bijasal, benteak, khair, haldu cum 61051.00 0.53 32056.05

52 PWD BUILDING 2015 9.16 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 9.16.2) Angle-iron frames Kg 73.50 492.80 36220.80

53 PWD BUILDING 2015 8.16 Providing and fixing PVC membrane foil coated (laminated) flush door shutters, made with core of block board with frame of first class hard wood, coated with 0.30mm membrane pasted with resin using vacuam treatment process complete all but excluding hinges. 8.16.1) 35 mm thick (Double leaf) sqm 1982.00 51.77 102599.02

54 PWD BUILDING 2015 8.16.2 30 mm thick (single leaf) sqm 1768.00 52.50 92820.00

55 PWD BUILDING 2015 8.15 Extra for double leaf shutter instead of single leaf sqm 52.00 81.99 4263.43

56 PWD BUILDING 2015 8.11 Providing and fixing glass panes in glazed or paneled and glazed shutters of doors and window, clearstory windows etc (Only area of glass panes to be measured). 8.11.2) 5mm thick sqm 502.00 9.03 4533.06

57 PWD BUILDING 2015 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: 9.47.1) For fixed portion kg 331.00 885.60 293133.57

58 PWD BUILDING 2015 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). kg 338.00 885.60 299333.48

59 PWD BUILDING 2015 9.48 Extra for powder coated (minimum 50 micron) aluminium sections instead of anodized. kg 27.00 1771.21 47822.67

60 PWD BUILDING 2015 9.51 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): 9.51.1) With float glass panes of 4 mm thickness sqm 611.00 187.80 114742.75

61 PWD BUILDING 2015 9.34 Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete. sqm 791.00 131.85 104294.14

62 PWD BUILDING 2015 9.61 Providing and fixing aluminium composite panels in approved panel sizes, thickness and shape on aluminium frame work on face of building. (Frame to be paid separately) 9.61.1) 3mm thick each 1283.00 44.10 56580.30

63 PWD BUILDING 2015 8.158 Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc complete. each 1450.00 22.00 31900.00

64 PWD BUILDING 2015 9.55 Providing and fixing of six/seven levers branded and approved mortise lock. each 594.00 36.00 21384.00

65 PWD BUILDING 2015 9.56 Providing and fixing of floor spring IS: marked (Everite, Door link or any equivalent make) with stainless steel cover plate each 1920.00 5.00 9600.00

66 PWD BUILDING 2015 8.3 Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm. providing 40x5mm iron hold fast 40cm long each 72.50 384.00 27840.00

67 PWD BUILDING 2015 8.58 Providing and fixing bright finished brass butt hinges with brass polished MS screws complete: 8.58.1) 125x85x5.50 mm (Heavy Type) each 245.00 252.00 61740.00

68 PWD BUILDING 2015 8.60 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete. 8.60.1) 300x16mm each 475.00 46.00 21850.00

70 PWD BUILDING 2015 8.62 Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete: 8.62.1) 250x10mm each 276.00 45.00 12420.00

72 PWD BUILDING 2015 8.65 Providing and fixing bright finished brass door handles with brass polished MS screws complete: 8.65.1) 125 mm each 55.50 158.00 8769.00

73 PWD BUILDING 2015 8.76 Providing and fixing bright finished brass hanging door stopper with necessary brass finished MS steel screws complete. each 44.00 86.00 3784.00

74 PWD BUILDING 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.. kg 67.50 3404.70 229817.25

75 PWD BUILDING 2015 9.11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. sqm 3330.00 6.12 20379.60

76 PWD BUILDING 2015 9.27 Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring. 9.27.2) 80x1.20mm M.S. Laths sqm 1570.00 6.12 9608.40

77 PWD BUILDING 2015 9.28 Providing and fixing 27.5cm long wire spring for rolling shutters. RS each 362.00 2.00 724.00

78 PWD BUILDING 2015 9.29 Providing and fixing M.S. sheet top cover for rolling shutter 9.29.2) 1.20mm thick sqm 530.00 0.72 381.60

79 PWD BUILDING 2015 9.30 Providing and fixing ball bearing for rolling shutters. RS each 423.00 1.00 423.00

80 PWD BUILDING 2015 9.57 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. 9.57.2) SS Grade 304 kg 525.00 199.20 104580.00

81 PWD BUILDING 2015 14.22 Painting on new work (two or more coats) to give an even shade with: 14.22.1) Satin synthetic enamel paint sqm 133.00 329.69 43849.10

82 PWD BUILDING 2015 14.13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. sqm 82.00 8758.45 718192.74

83 PWD BUILDING 2015 14.10 Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. 14.10.1) On new work (two or more coats) sqm 74.00 4906.31 363067.24

84 PWD BUILDING AMM. 2015 14.68 Providing and applying on exterior surface with PREMIUM Exterior emulsion paint of required shade to give protective and water proof finish minimum 3 coats applied@ 1.40 lit / 10Sqm up to final finish as per relevant I.S.Code 15489:2013 Type -2 Class D, C (Glossy /Semi Glossy finish) (Product such as Asian Apex ,Dulux Weather Shield Prima E900, Berger Weathercoat Antidust, Nerolac Everlas Excel, Nippon Sumo Etra, Opus True flex) inclusive of providing abro tape on edges and articleand cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. (With 3 Year Warranty.) sqm 74.00 3852.13 285057.62

85 PWD BUILDING AMM. 2015 14.68 Providing and applying on exterior surface with PREMIUM Exterior emulsion paint of required shade to give protective and water proof finish minimum 3 coats applied@ 1.40 lit / 10Sqm up to final finish as per relevant I.S.Code 15489:2013 Type -2 Class D, C (Glossy /Semi Glossy finish) (Product such as Asian Apex ,Dulux Weather Shield Prima E900, Berger Weathercoat Antidust, Nerolac Everlas Excel, Nippon Sumo Etra, Opus True flex) inclusive of providing abro tape on edges and articleand cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. (With 3 Year Warranty.) sqm 84.00 2695.66 226435.78

86 PWD BUILDING 2015 18.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : 18.1.3) White Orissa pattern W.C. pan of size 580x440 mm each 2899.00 8.00 23192.00

87 PWD BUILDING 2015 18.4 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 18.4.1) White pedestal type each 2882.00 15.00 43230.00

88 PWD BUILDING 2015 18.22 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 18.22.2) 560x410 mm bowl depth 215 mm. each 6210.00 2.00 12420.00

89 PWD BUILDING 2015 18.17 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required 18.17.2) White Size 550x400 mm each 1408.00 4.00 5632.00

90 PWD BUILDING 2015 18.17.5 White Oval or round size 550x400mm. each 1605.00 18.00 28890.00

91 PWD BUILDING 2015 18.19 Providing and fixing vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.required 18.19.1) White each 1130.00 4.00 4520.00

92 PWD BUILDING 2015 18.13 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: 18.13.1) Flat back half stall urinal of size 460x380x250mm each 1776.00 13.00 23088.00

93 PWD BUILDING 2015 18.15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : each 2014.00 9.00 18126.00

94 PWD BUILDING 2015 18.27 Providing and fixing cast iron grating for gully trap. 18.27.1) 100x100mm square or round each 30.00 58.00 1740.00

95 PWD BUILDING 2015 18.29 Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 599.00 22.00 13178.00

96 PWD BUILDING 2015 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 18.76.1) 75 mm dia pipe. Rm 182.00 67.50 12285.00

97 PWD BUILDING 2015 18.76.2 110 mm dia pipe. Rm 267.00 155.25 41451.75

98 PWD BUILDING 2015 18.77 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 18.77.1) Tee/ Tee with door/ Bend 45°/ Bend 90° 18.77.1.1) 75 mm each 113.00 18.00 2034.00

100 PWD BUILDING 2015 18.77.2 Double "Y" with or without door 18.77.2.1) 75 mm each 129.00 20.00 2580.00

102 PWD BUILDING 2015 18.77.3 Vent covel 18.77.3.1) 75 mm each 34.00 10.00 340.00

104 PWD BUILDING 2015 18.77.4 Access door cap 18.77.4.1) 75 mm each 49.50 20.00 990.00

106 PWD BUILDING 2015 18.77.5 "P" trap 110mmx110mm long each 227.00 5.00 1135.00

107 PWD BUILDING 2015 18.77.6 Nahani trap 110x75mm each 90.50 59.00 5339.50

108 PWD BUILDING 2015 18.77.7 Multi floor trap 110 each 122.00 8.00 976.00

109 PWD BUILDING 2015 18.77.8 Plain reducing Tee 110x75mm each 129.00 20.00 2580.00

110 PWD BUILDING 2015 18.78 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 18.78.1) 75 mm each 57.00 80.00 4560.00

112 PWD BUILDING 2015 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., 19.5.1) 15 mm nominal outer dia .Pipes. Rm 133.00 70.00 9310.00

113 PWD BUILDING 2015 19.5.2 20 mm nominal outer dia .Pipes. Rm 167.00 60.00 10020.00

114 PWD BUILDING 2015 19.5.3 25 mm nominal outer dia .Pipes. Rm 213.00 25.00 5325.00

115 PWD BUILDING 2015 19.5.4 32 mm nominal outer dia .Pipes. Rm 284.00 50.00 14200.00

116 PWD BUILDING 2015 19.1 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: 19.13.1) Bib cock (250 grams) each 185.00 50.00 9250.00

117 PWD BUILDING 2015 19.13.2 Bib cock (350 grams) each 237.00 50.00 11850.00

118 PWD BUILDING 2015 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: 19.14.1) Bib cock (400 grams) each 382.00 40.00 15280.00

119 PWD BUILDING 2015 19.14.3 Long body bib cock (500 grams) each 426.00 8.00 3408.00

120 PWD BUILDING 2015 19.14.4 Piller Cock (400 grams) each 398.00 24.00 9552.00

121 PWD BUILDING 2015 19.14.5 Two way bib cock (800 grams) each 708.00 8.00 5664.00

122 PWD BUILDING 2015 19.14.6 Stop cock (concealed) (600 grams) each 494.00 20.00 9880.00

123 PWD BUILDING 2015 19.14.14 Soap dish plate each 163.00 20.00 3260.00

124 PWD BUILDING 2015 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) set 774.00 20.00 15480.00

125 PWD BUILDING 2015 19.18 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 19.18.1) 25 mm nominal bore each 413.00 12.00 4956.00

126 PWD BUILDING 2015 19.18.2 32 mm nominal bore each 556.00 5.00 2780.00

127 PWD BUILDING 2015 20.28 Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : 20.28.1) Inside dimensions 455x610 mm and 45 cm deep for single pipe line : each 3796.00 8.00 30368.00

128 PWD BUILDING 2015 20.28.2 Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : each 4357.00 3.00 13071.00

129 PWD BUILDING 2015 20.3 Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/cm2, water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 20.3.2) 150 x 100 mm size P type. nos 1397.00 1.00 1397.00

130 PWD BUILDING 2015 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. each 1709.00 2.00 3418.00

131 PWD BUILDING 2015 21.18 Providing and fixing filter of minimum 100 litre capacity for roof top rain water harvesting through tube well consisting of two layered HDPE tank with five layers (each layers of minimum 100 mm) consist of coarse sand, 4mm, 6mm, 8mm & 12 mm gravels with stainless steel wire mesh fixed between each layer with suitable length and sufficient numbers of 110 mm dia PVC pipe pieces in the bottom of tank to support the above layer including fixing of inlet and out let P.V.C. pipe of required diameter upto 2 metre length on each side, Cement Concrete plateform of required size complete as directed by Engineer in charge. (excluding cost of tubewell and inlet and outlet pipe beyond 2 metre) litre 18.50 2000.00 37000.00

132 PWD BUILDING 2015 21.19 Providing and fixing 80-100 mm dia PVC ball valve for inlet/ outlet of rain water harvesting pipe and filter. each 644.00 2.00 1288.00

133 PWD BUILDING 2015 21.1 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level. 21.1.1) All types of soil 21.1.1.3) 150 mm dia. Rm 339.00 30.00 10170.00

134 PWD BUILDING 2015 21.1.2 Rocky strata including Boulders. 21.1.2.3) 150 mm dia. Rm 396.00 60.00 23760.00

135 PWD BUILDING 2015 21.2 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level. 21.2.2) Rocky strata including Boulders. 21.2.2.3) 150 mm dia. Rm 424.00 60.00 25440.00

136 PWD BUILDING 2015 21.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) slotted pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 21.4.3) 150 mm nominal size dia. Rm 546.00 30.60 16707.60

137 PWD BUILDING 2015 21.12 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 21.12.3) 150 mm clamp. each 1055.00 1.00 1055.00

138 PWD BUILDING 2015 21.13 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I). 21.13.3) 150 mm dia each 171.00 1.00 171.00

139 PWD BUILDING 2015 9.6 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. 9.6.1) In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. kg 70.00 145.00 10150.00

140 PWD BUILDING 2015 9.6.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. kg 68.00 180 12240.00

141 PWD BUILDING 2015 9.3 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. 9.3.1) Electric resistance or induction butt welded tubes Grade-250 kg 88.50 7608.98 673394.29

142 PWD BUILDING 2015 9.4 Extra for curvature in making steel work in tubular structure in built-up sections, trusses and frame work kg 2.30 7608.98 17500.65

143 PWD BUILDING 2015 9.5 Extra for hoisting trusses and placing in position over height above 5m for every 2.5 m height or part thereof. kg 2.70 7608.98 20544.25

144 PWD BUILDING 2015 10.12 Supply and fixing of polymer precoated galvalume profile sheets (PPGL) of approved size, shape and pitch of corrugation, total coated thickness (TCT) 0.60 mm +/- 5%, epoxy primer on both side of the sheet and colour polyester top coat 18-20 microns and 6-7 microns on bottom. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm 693.00 686.11 475476.31

145 PWD BUILDING 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank litre 7.30 3000.00 21900.00

146 PWD BUILDING 2015 4.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of WC, kitchen and the like consisting of: sqm 445.00 62.47 27796.93

147 PWD BUILDING 2015 8.13 Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges. 8.13.3) 30 mm. thick (single leaf) sqm 1197.00 9.45 11311.65

148 PWD ROAD 2015 3.2 Excavation in soil (by Mechnical means ) Excavation for roadway in soil using mechanical means including loading in tipper for carrying of cut earth to embankment side and unloading with all leads & lifts as per relevant clauses of section 300 cum 95.00 107.91 10251.45

149 PWD ROAD 2015 3.12 Construction of embankment with Material Obtained from Borrow Pits/Borrow Area (Construction of embankment with approved material/selected soil having C.B.R.>5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) cum 223.00 104.31 23261.13

150 PWD ROAD 2015 4.1 Granular Sub-base as per Table:- 400-1 Construction of granular sub-base by providing graded Material, ,carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401. b) For Sub-base cum drainage layer or upper sub-base with (i) Grading-V Material cum 1372.00 52.16 71556.66

151 PWD ROAD 2015 6.1 Dry Lean Cement Concrete Sub-base as per IRC:SP-49 (Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 26.5 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing as per clause 601.) cum 2332.00 34.16 79661.12

152 PWD ROAD 2015 6.7 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads) (iii)) P.C.C. M-30 cum 4391.00 67.10 294636.10

153 PWD ROAD 2015 9.4 Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe on first class bedding. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts on first class bedding of granular material including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets). B) 600 mm dia mtr 2617.00 7.50 19627.50

154 PWD ROAD 2015 4.11 Construction of Shoulders (Construction of shoulders as per clause 408 with selected soil from borrow pits / borrow areas having CBR not less than 12 and shall have L.L. and P.I. not more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing required cross fall, compacting. watering rolling and royalty charges etc. complete. B) With smooth wheeled roller cum 277.00 24.40 6758.80

155 PWD BUILDING 2015 15.5 Boring, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in cement concrete 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size), to carry a safe working load, excluding the cost of steel reinforcement but including the cost of boring with auger by manual means and making one bulb using suitable bulb enlarging tool by MANUAL MEANS with all instruments and arrangements required for boring true to vertical line etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap): 15.5.2) 300 mm dia piles metre 776.00 98.36 76325.81

156 PWD BUILDING 2015 15.6 Extra for providing additional bulb in under reamed piles, under specified dia using necessary bulb enlarging tool and by MANUAL MEANS (Only the quantity of extra bulbs are to be paid): 15.6.2) 300 mm dia piles. each 365.00 37.83 13807.95

157 PWD BUILDING 2015 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. 1.1.1) In all types of soil (Column) Cum 185 15.90 2941.54

158 PWD BUILDING 2015 3.1 Providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work. 3.1.3) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). Cum 2970 4.01 11921.16

159 PWD BUILDING 2015 3.2 Providing and laying nominal mix reinforcement cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 3.2.1) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). Cum 4163 7.94 33053.95

160 PWD BUILDING 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Cum 97.5 3.57 348.56

161 PWD BUILDING 2015 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire all complete: 3.12.1) Thermo-Mechanically treated bars Fe 415 Kg 54.5 2337.54 127396.19

162 PWD BUILDING 2015 2.1 Providing and fixing formwork including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: 2.1.1) Foundations, footings, base of columns and plinth beam in any shape and size. Sqm 139 70.33 9776.52

163 PWD BUILDING 2015 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape Sqm 297 47.67 14156.74

164 PWD BUILDING 2015 7.5 Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: 7.5.4 ) Cement Mortar 1:6 (1 cement : 6 coarse sand) Cum 3263 17.99 58690.63

165 PWD BUILDING 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Cum 121 17.99 2176.39

166 PWD BUILDING 2015 11.2 12mm thick cement plaster of mix: 11.2.4) In Cement Mortar 1:6 (1 cement : 6 fine sand) Sqm 91.5 120.94 11065.97

167 PWD BUILDING 2015 11.3 15mm thick cement plaster on the rough side of single or half brick wall of mix: 11.3.4) In Cement Mortar 1:6 (1 cement : 6 fine sand) Sqm 107 116.40 12454.80

168 PWD BUILDING 2015 14.12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete. Sqm 23.00 237.34 5458.81

169 PWD BUILDING 2015 14.15 Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: 14.15.1) On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sqm 56 237.34 13291.02

170 PWD BUILDING 2015 3.21.2 Providing and fixing in position impregnated fibre board confirming to IS: 1838 in expansion joints, including cost of primer, sealing compound all complete.25mm thick Sqm 768.00 2.44 1877.30

171 PWD ELECT 2020 1.7 Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5), 1.7.1 ,,short point Point 266.00 93 24738.00

172 PWD ELECT 2020 1.7.2 Medium Point Point 424.00 191 80984.00

173 PWD ELECT 2020 1.7.3 Long Point Point 588.00 424 249312.00

174 PWD ELECT 2020 1.8 Wiring for twin control light point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 420.00 6 2520.00

175 PWD ELECT 2020 1.9 Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 216.00 135 29160.00

176 PWD ELECT 2020 1.10 Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5), 1.10.1 , short point Point 442.00 39 17238.00

177 PWD ELECT 2020 1.10.3 Long Point Point 922.00 7 6454.00

178 PWD ELECT 2020 1.10.4 Extra Long Point I Point 1302.00 8 10416.00

179 PWD ELECT 2020 1.10.5 Extra Long Point II Point 1657.00 7 11599.00

180 PWD ELECT 2020 1.10.6 Extra Long Point III Point 1995.00 9 17955.00

181 PWD ELECT 2020 1.11 Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5),1.11.3 , long point Point 1350.00 9 12150.00

182 PWD ELECT 2020 1.11.4 Extra Long Point I Point 1807.00 12 21684.00

183 PWD ELECT 2020 1.11.5 Extra Long Point II Point 2315.00 12 27780.00

184 PWD ELECT 2020 1.11.6 Extra Long Point III Point 2825.00 14 39550.00

185 PWD ELECT 2020 1.12 Wiring for power plug point with 3x6 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 32 Amp SPMCB "C" curve and 6 pin 20 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)1.12.3 , long point Point 1705.00 1 1705.00

186 PWD ELECT 2020 1.12.4 Extra Long Point I Point 2326.00 2 4652.00

187 PWD ELECT 2020 1.12.5 Extra Long Point II Point 3016.00 3 9048.00

188 PWD ELECT 2020 1.12.6 Extra Long Point III Point 3708.00 2 7416.00

189 PWD ELECT 2020 1.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5), 1.13.1 , 3 X 1.5 sq. mm in 20mm conduit Metre 92.00 730.8 67233.60

190 PWD ELECT 2020 1.13.2 3 X 2.5 sq. mm in 20mm conduit Metre 111.00 682 75702.00

191 PWD ELECT 2020 1.13.3 6 X 2.5 sq. mm in 25mm conduit Metre 172.00 650 111800.00

192 PWD ELECT 2020 1.13.4 9 X 2.5 sq. mm in 32mm conduit Metre 238.00 530 126140.00

193 PWD ELECT 2020 1.13.5 12 X 2.5 sq. mm in 32mm conduit Metre 288.00 430 123840.00

194 PWD ELECT 2020 1.13.6 3 X 4 sq. mm in 25mm conduit Metre 145.00 420 60900.00

195 PWD ELECT 2020 1.13.7 3 X 6 sq. mm in 25mm conduit Metre 182.00 295 53690.00

196 PWD ELECT 2020 1.13.13 6 X 6 sq. mm in 32mm conduit Metre 312.00 285 88920.00

197 PWD ELECT 2020 1.13.14 6 X 10 sq. mm in 40mm conduit Metre 515.00 315 162225.00

198 PWD ELECT 2020 1.13.15 6 X 16 sq. mm in 50mm conduit Metre 772.00 205 158260.00

199 PWD ELECT 2020 5.4 Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification.5.4.3 Bell push Each 80.00 9 720.00

200 PWD ELECT 2020 5.4.8 Fan regulator (one module size) electronic stepped type moving all rounds Each 186.00 140 26040.00

201 PWD ELECT 2020 5.4.18 25/32 amp A.C. Starter switch Each 246.00 8 1968.00

202 PWD ELECT 2020 5.4.22 Batten/ angle holder Each 41.00 78 3198.00

203 PWD ELECT 2020 5.6 Providing and fixing composite unit for computer points having modular type 1 No 6 pin 16 amp socket outlet, 1 No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3 Nos 6 amp switches, suitable G.I. box, base and cover plates, earthing the sockets and switch box including etc. as per specification. Each 816.00 29 23664.00

204 PWD ELECT 2020 5.7 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts A.C. supply, complete as per specification.5.7.2, Deluxe Each 107.00 9 963.00

205 PWD ELECT 2020 5.10 Providing and fixing fan hook made of 12mm dia steel bar in existing ceiling slab including cutting of roof, fixing hook above reinforcement on both side, repairing with cement mortar 1:2 (1 cement : 2 sand) etc. as per specification. Each 109.00 140 15260.00

206 PWD ELECT 2020 6.1 Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments. 6.1.3 , 1200mm sweep Each 1697.00 140 237580.00

207 PWD ELECT 2020 6.5 Supplying and fixing of wall/ cabin fan including connection etc. as per specification. P.F. should be greater than 0.9 , 6.5.2 , 400mm sweep Each 2043.00 4 8172.00

208 PWD ELECT 2020 6.6 Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9. 6.6.1 , 300mm sweep Each 2446.00 17 41582.00

209 PWD ELECT 2020 6.6.2 380 mm sweep Each 2858.00 27 77166.00

210 PWD ELECT 2020 6.15 Supplying, installation, testing and commissioning of following LED fitting (luminaries) Panel Light in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. , 6.15.5 , 15/16 Watt Each 679.00 103 69937.00

211 PWD ELECT 2020 6.16 Supplying, installation, testing and commissioning of following sleek LED panel down lighters (luminaries) in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.16.1 , 24 watt, size 300 x 300mm Each 1775.00 28 49700.00

212 PWD ELECT 2020 6.17 Supplying, fixing, testing and commissioning of following LED lamps with inbuilt electronic driver heat sink and all other accessories in existing holder/ luminaries as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.17.5. , 12watt Each 215.00 78 16770.00

213 PWD ELECT 2020 6.21 Supplying, installation, testing and commissioning of following LED tube light fitting {Inverter Type: with builtin battery backup} including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification. IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. , 6.21.1 , 20 watt Each 997.00 281 280157.00

214 PWD ELECT 2020 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt.6.28.6 , 45 watt Each 2729.00 17 46393.00

216 PWD ELECT 2020 7.18 Providing and making interconnection in cubical panel between BBC and switchgears with following size copper strip of length upto 50cm as per specification (To be measured separately for each phase/ neutral).7.18.1 , 20x3mm (100 amps) Each 173.00 20 3460.00

218 PWD ELECT 2020 7.19 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. (Only face area is to be measured), 7.19.2 , Above 300 mm and upto 450 mm deep sqm 7525.00 3.2 24080.00

219 PWD ELECT 2020 7.20 Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) aluminium bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification.7.20.4 .400 amp (50x6mm) Metre 1531.00 6 9186.00

220 PWD ELECT 2020 9.1 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu… , 9.1.3 , 3 pole MCCB, 25-100A, Adjustable Thermal Release, 18KA Each 2385.00 5 11925.00

221 PWD ELECT 2020 9.1.4 3 pole MCCB, 100A, Adjustable Thermal - Magnetic Release, 25KA Each 3734.00 5 18670.00

222 PWD ELECT 2020 9.1.12 3 pole MCCB, 400A, Adjustable Thermal - Magnetic Release, 35KA Each 14220.00 1 14220.00

223 PWD ELECT 2020 9.5 Supplying and fixing on surface/ recess vertical type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, with 200 amps tinned copper busbar, common neutral link, earth bar, din bar, detachable gland/ knock out plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)9.5.4, 4 way (4 + 12), Double door Each 4149.00 4 16596.00

224 PWD ELECT 2020 9.5.5 8 way (4 + 24), Double door Each 5138.00 4 20552.00

225 PWD ELECT 2020 9.11 Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.9.11.2 , .6 amps to 32 amps Each 148.00 138 20424.00

226 PWD ELECT 2020 9.16 Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.9.16.5.63 amps Each 1316.00 9 11844.00

227 PWD ELECT 2020 10.8 Providing and fixing metal clad, TP&N motorized change over switch unit, 415/500 volts, including drilling holes on the board, connections, earthing the body, testing and commissioning etc. as per specification.10.8.5. ,, 400amp Each 47577.00 1 47577.00

228 PWD ELECT 2020 10.13 Providing and fixing 3 pole, 415/500 volts following rating (AC-1 Duty) power contactor in existing starter/ cubical panel including, connections, testing and commissioning etc. as per specification.10.13.3. 60 amp Each 3261.00 1 3261.00

229 PWD ELECT 2020 10.17 Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification. Each 94.00 10 940.00

230 PWD ELECT 2020 10.18 Providing and fixing penal mounting following rating analog type ammeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification.10.18.3 . 0-200amps Each 458.00 4 1832.00

231 PWD ELECT 2020 10.20 Providing and fixing penal mounting 0-500 volt voltmeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification.10.20.2 . Digital type Each 835.00 4 3340.00

232 PWD ELECT 2020 10.21 Providing and fixing penal mounting selector switch in existing cubical panel including, connections, testing and commissioning etc. as per specification.10.21.1 . For voltmeter Each 189.00 4 756.00

233 PWD ELECT 2020 10.21.2 For ammeter Each 207.00 4 828.00

234 PWD ELECT 2020 10.22 Providing and fixing following Time switch (timer) in existing panel including connection, testing and commissioning as per specification.10.22.1 , digital type Each 1901.00 1 1901.00

235 PWD ELECT 2020 11.2 Supplying, installation, testing and commissioning following rating single phase in single phase out ON-LINE UPS including connection etc but without batteries as per specification.11.2.2 . 3 KVA with DC bus voltage 72 V Each 33027.00 2 66054.00

236 PWD ELECT 2020 11.4 Supplying, installation, testing and commissioning following rating (Sealed Maintenance Free) lead acid battery including connection as per specification.11.4.4 . 120AH Each 12124.00 2 24248.00

237 PWD ELECT 2020 12.3 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 6209.00 10 62090.00

238 PWD ELECT 2020 12.4 Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as per specification. Metre 77.00 125 9625.00

239 PWD ELECT 2020 12.5 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including soldering, excavation and refilling the trench etc. as per specification. Metre 513.00 45 23085.00

240 PWD ELECT 2020 14.2 Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification..14.2.6.. 160mm outer dia Metre 664.00 100 66400.00

241 PWD ELECT 2020 15.1 Supplying and laying following sizes one number FRLS PVC insulated/XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade direct in ground at a depth not less than 40 cm and upto 90 cm including excavtion, sand cushioning, protective covering and refilling the trench etc as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1).15.1.15 . 3.5 x 95 sq. mm Metre 488.00 130 63440.00

245 PWD ELECT 2020 15.23 Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. .15.23.16 , 3½ X 95 sq. mm (38 mm) Each 256.00 8 2048.00

249 PWD ELECT 2020 19.3 Supply of swaged steel tubular pole as per IS 2713 with base plate of size 300x300x6mm welded at bottom, necessary hole for cable entry and earthing stud welded at specified height including painting with one coat of red oxide zinc chromate primer.19.3.11 , Designation 410 SP-32 height 9.00 metre Each 11825.00 12 141900.00

250 PWD ELECT 2020 19.9 Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification.19.9.2,,Single Over Hang 1.00 metre Long Each 1057.00 8 8456.00

251 PWD ELECT 2020 19.9.6 Double Over Hang 1.00 metre Long Each 1509.00 4 6036.00

252 PWD ELECT 2020 19.10 Erection of STEEL TUBULAR or "H" BEAM/ ISMB pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation and cement concrete collar of size 0.4 metre dia and 0.50 metre height from ground level including excavation and refilling etc. as per specification of length:19.10.4, 7 metre to 10 metre Each 2610.00 12 31320.00

253 PWD ELECT 2020 19.17 Supplying and fixing PVC water tight terminal box of approved make and brand with detachable gland plate in bottom, hinged front openable cover, rubber gasket, having 1 Nos 4way connector and 1 No SPMCB inside the box for cable connection, fixed to pole with 2 Nos clamp made from 25x3mm GI flat with 2 No GI nuts bolts complete as per specification.19.17.2 , 300x200x125 mm for 3 phase Each 989.00 12 11868.00

254 PWD ELECT 2020 23.3 Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010). Note: submersible Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant.23.3.3 ,2.0 HP, single phase Each 19805.00 1 19805.00

255 PWD ELECT 2020 23.6.1 Supplying and fixing following dia HDPE pipe PE-80 Grade (8kg/sqcm) in single length in the suction/ delivery line of water supply pump etc. as per specification. 23.6.32 mm outer dia Metre 55.00 95 5225.00

256 PWD ELECT 2020 23.11 Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as per specification. a) Phase indicating lamps with fuses and toggle switches 1 set b) 1/2/3 HP 1 phase DOL starter with over load and no volt relay 1 No c) 25 A "C" curve DPMCB 1 No d) Voltmeter 0-250 V 1 set e) Ammeter 0-10 A 1 set Each 4030.00 1 4030.00

257 PWD ELECT 2020 23.12 Supplying and fixing M.S. clamp 50 cm long made of 50mmx5mm thick M.S. Flat for holding the pipes and submerable pump set as per specification. Metre 291.00 1.5 436.50

258 PWD ELECT 2020 23.13 Supplying and fixing 300 mm dia 2 mm thick M.S. sheet cover with 3 cm edge in two past on tube well bore pipe as per specification Each 388.00 1 388.00

259 PWD ELECT 2020 23.14 Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as per specification and IS: 694 (2010). Note: Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant.23.14.3,3x4.0 sqmm Metre 90.00 120 10800.00

260 PWD ELECT 2020 23.16 Supplying and laying of approved make stainless steel wire rope of 6 mm dia for support of submersible pump set complete with tying to pump set and pump holding clamp. Metre 16.00 120 1920.00

261 PWD ELECT 2020 24.23 Supplying, installation, testing and commissiong of following size drinking water cooler storage type ISI marked, eco friendly non CFC refrigarant, water tank and cooler cabinet sheet material- stainless steel {grade AISI 304} with thickness>= 0.8 mm, with PUF insulation including all accessories connection etc complete as per specification. 24.23.3 .150/150 Ltrs/hr Each 47568.00 1 47568.00

262 PWD ELECT 2020 24.24 Supplying, installation, testing and commissiong of following capacity of RO purification system with UF/UV/TDS controler and UV lamp {IS 14724 Ultra voilet disinfection} and minimum three stage purification, automatic on/off, output water conferming standard IS 10500 with inbuild storage tank including all accessories connection etc complete as per specification. 24.24.2 . 50 Ltrs/hr output capacity Each 39021.00 1 39021.00

263 PWD ELECT 2020 26.17.5 CO2 type Fire Extinguisher ISI marked confirming to IS:15683:2018 Capacity 4.5Kg. INITIAL CHARGE:- Carbon dioxide used in extinguishers shall comply with IS 15222. FIRE RATING:- 55B. Complete with Hose Assembly and horn , locking arrangement, operation manual, bracket with two screw and sleeve Each 8222.00 10 82220

264 PWD ELECT 2020 30.12 Providing and laying Cast-in-situ cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm including mixing with mechanical mixer, compacting with vibrator, finishing and currying etc. complete but excluding form work. cum 3426.00 3.5 11991.00

G Total 40922143.60

Say Rs. 409.22 Lacs