PROVN OF CERTAIN REVENUE AND MINOR WORKS AT INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

SCHEDULE 'A' PART-I (B/R WORKS) Demolition of stone slabs and PCC tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specified and directed by Engineer-in-charge.

M&L for 100 mm thick PCC B-1, 1:2:4 (20mm graded aggregate) for floor / sub base all as specified and directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

M&L for brickwork with fly-ash bricks (with old size bricks), straight or curved on plan exc 6m mean rate any radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement mortar on brick or stone walls etc including raking out joints , hacking for keys scrubbing down with water etc all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:4 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. all as specified and directed.

S&F for liquid water proofing compound complete all as specified and directed

M&L for RCC(Nominal mix) type B-1 1:2:4 (20mm graded aggregate) in Roof Beam, cantilevers, bressummers, lintel over 1.5m span all as specified

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for TMT bars but 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for preparation of new surface of wall applying two coat of oil emulsion distemper over a coat of alkali resistant primer to match all as specified and directed by Engr-in-charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces and preparation on walls all as specified and directed.

S&F for Steel work in tubular trusses in roof trusses (framed), trussed, posts, purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.

S&F for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.

M&L for new steel and iron surfaces apply two coats of synthetic enamel paint over one coat of red oxide of any description, not 10cm in width or girth, not otherwise described complete all as specified and directed.

S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. Note :-Any height of bldg.

Taking down Chowkhats or frames with shutter exc 1.5 sq. m but n exc 4 sq. m each all as specified and directed. (pvc door/aluminum door/ Aluminum window).

S&F Aluminum anodised Powder coated for doors, windows, ventilators and partition with one or more rebate (minimum thickness of powder coating 50 micron) and three track with 1.8 mm thick channel section and shutter frame thickness 1.65mm, without sash bars, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc complete all as specified and directed. Notes: 1) Size of window shall be as per site requirement. 2) Glass and wire cloth shall be measured separately.

S&F for Anodised aluminium powder coating 50mm thick micron door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F for Anodised aluminium powder coating 50mm micron window and ventilator shutters, cup board shutter for sliding type etc fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

S&F for Anodised aluminium powder coating 50mm micron window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

S&F 4.8mm thick ordinary quality sheet glass/frosted glass and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as directed. (upto 04 storey high building).

S&F for Aluminium 4 levers Mortice lock, vertical type, size 100 mm all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.

S&F Block boards 18 to 19 mm thick, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work( as in cup board) INCL taking down old one complete all as specified and directed.

S&F Decorative laminate type ( 0.9 mm thick) of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F Continuous (piano) hinges in brass bright finish, width of flap 40 mm complete all as specified and directed.

S&F 40mmdia,cupboard knobs fixed with nut, screw and washer in brass polished and bright finished complete all as specified and directed.

S&F multi purpose cupboard lock ( Brass finish) of 65 mm size in 4 lever complete all as specified and directed.

S&F cupboard magnets heavy duty complete all as specified and directed.

S&F Brass flush tower bolt, type 2 and fixed flush long, heavy duty complete all as specified and directed.

S&F Hydraulic cabinet Hinges any size as per direction of Engr-in-Charge.

M&L Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

Supply and fix bands, straps, supports or stays for cupboard , drawer , hanging shelf etc including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Material and labour for preparation of new and previously un-treated steel surfaces of any description, not otherwise described over 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed.

S&F anodised Powder Coated aluminium Shutter (Size 41mmx20mm 1.60mm railing size 20mm) @0.50Kg/Rm for windows, ventilators with one or more rebates including necessary jointing cleats, glazing clips rubber packing for fixing etc. complete all as specified.

S&F 5.5 mm thick coloured / tinted toughened frosted glass fixed in aluminium / Upvc beads (beading included with shutter) or as in hinge door , partition , windows , automatic doors and similar work including cutting to shape , drilling holes as required complete all as specified and as directed.

S & F solar control film 25 micron reflective type (garware sun control or equivalent ) complete all as specified and directed.

S&F prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to Aluminium/timber/iron frame work complete all as spd and directed.

M&L brick work with Fly ash bricks old size brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with Fly ash bricks' old size brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 20mm thick cement mortar bedding (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. (upto 04 storey High of building).

M&L for rendering 10 mm thick on fair faces of brick work or concrete wall surfaces in CM 1:6 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of acrylic distemper over a coat of alkali registrant primer with 1mm thick wall care putty. complete all as specified and as directed by Engineer-in-charge.

M/L preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coat of oil emulsion distemper over a coat of alkali registrant primer and one coat of wall putty (1 mm thick) to match with the new surface on wall. complete all as specified and as directed by Engineer-in-charge.

Providing precast cement concrete 1:2:4 type B1 20 mm graded aggregate as in landing , cover slab , chullah hoods, chajjas , water troughs , manager , kitchen slab , kitchen platform and similar article with plain face including chamfered , weathering , throating etc and set in cement mortar 1:6 complete with joints to match locks and joints , complete all as specified and as directed.

M&L for RCC type B-1 1:2:4 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roof , landings, balconies, canopies, slabs, deck slabs and in shelves and the like all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for laying pipes etc or for manhole shaft n exc 10 sqm on plan and n exc 1.5m in depth and getting out Soft and loose soil all as specified and directed.

M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation (using 40 mm graded granite stone aggregate) in foundation etc complete all as specified and directed.

M&L for hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L20mm thick coloured granite tiles, machine cut as in steps, jambs, pillars, window cills, cooking platforms and on floor over 10 mm thick backing layer in cement mortar (1:6) , set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite tile including rubbing and polishing complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point in any type of soil all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed.

Supply and fixing factory made uPVC white colour Sliding window Three track, area not exceeding 2.00 sqm each, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 no's, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

Supply and fixing factory made uPVC white colour Sliding window Three track, area exceeding 2.00 sqm each, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 no's, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F powder coated anodised aluminium window grills of size 100 x 100mm having section width 6 mm and 3 mm thickness, fixed on aluminium section weighing not less than 0.55 kg/metre including necessary jointing fittings etc all as per manufacturer's instruction complete all as specified and directed.

S&F stainless steel wire cloth, 0.65mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as directed.

S&F 10 to 12mm thick gypsum board false ceiling on curved or plain type surface including any sunk or raised moulding including in step design . Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces complete all as specified and as directed by Engineer-in-Charge/ Garrison engineer.

M & L Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

(E/M PORTION) M & L for point wiring with 1.5 sqmm (Nominal Area) FRLS PVC insulated un sheathed multi stranded copper conductor, 1100 Volts grade, in and including PVC casing capping/conduit (ISI marked) with accessories such as bends, cross, elbow, tees etc. of suitable size including MS pressed steel cadmium plated terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and 3 mm thick laminated sheet top cover(ISI marked) including continuous earth wire FRLS PVC insulated unsheathed 1.5 Sq mm(nominal area) copper multistarnded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for one light point/Exhaust fan/ceiling fan/ call bell point point controlled by one switch Note : Wiring Color code i.e. Red/Yellow/Blue for Phase, Black for neutral and Green for earth shall be maintained.( for concealed wiring chase cutting will be measured and paid separately.)

All as per item No 70 above but for one three pin socket outlet on same board

All as per item No 70 above but for one three pin socket out let 5 amps on independent board.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Ceiling rose surface type 3 terminals 65x20mm complete all as specified

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Switch socket outlet 3 pin 6 amp' flush type complete all as specified and directed.

S&F Fan step regulator, 120W - 2 module complete all as specified and directed.

S&F White cover plate with frame, 2 module complete all as specified and directed.

S&F White cover plate with frame, 3 module complete all as specified and directed.

S&F White cover plate with frame, 8/12 module complete all as specified and directed.

S&F Metal flush box 1/2 module complete all as specified and directed.

S&F Metal flush box 3 module complete all as specified and directed.

S&F metal flush box, 8/12 module complete all as specified and directed.

M & L for point wiring with 4.00 sqmm (Nominal Area) FRLS PVC insulated un sheathed multi stranded copper conductor, 1100 Volts grade for 3 Pin socket outlet 15 Amps on independent board with PVC conduit (ISI Marked) medium duty not less than 20mm dia with accessories such as elbow, tees, internal & external bend etc. of suitable size including continuous earth wire FRLS PVC insulated 4.00 Sq mm copper multi stranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified. Note : 1) Wiring Color code i.e. Red for Phase, Black for neutral and Green for earth shall be maintained. 2) Necessary chase cutting for conduits if requires, shall be measured & paid separately under respective items in this schedule.

S&F modular Switch Socket combination outlet 6 pin 16 Amps flush type complete all as specified and directed.

S & F 6-M flush type with AC starter, 25 Amps MCB, Plug top with indicator, Alongwith Flush plate plate including connection complete all as specified and directed.

M & L for sub main wiring with single core PVC insulated unsheathed , 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metallic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit. (ii) chase cutting if required shall be measured and paid separately under relevant items in this schedule.

Supply and fix MCB SP 240V, 6-32 Amps capacity complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity 40 to 63 AMP in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F Double Door, Sheet Metal Enclosure for DBs (premium range), for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN008DD / LEGRAND, Cat No: 507611 /ABB, Cat No. E-SHC M 8 / SCHNEIDER, Cat No. A9HSND08 / HAGER, Cat No: VYS08D)

Cutting chases for concealed conduit wiring and making good, cutting not exc 10 cm girth complete all as specified and directed.

Supply and fixing LED lights fitting 1x 40W 220V, of size 1X4 Ft panel light with high performance commercial grade solution with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make Crompton Cat No-LCTLRNE-40-CDL.or equivalent make specified in tender.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F Building security light 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing wall mounted fans complete with blades, down rods, electronic regulator and accessories, 230 V, 400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized iron strip 25 X 4 mm (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing and dismantling of existing unsv earthing complete all as shown in Figure 15A of IS 3043 :1987, complete all as specified and directed.

Supply and fixing of switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) complete all as specified/ directed.

S&F Switch piano flush type single pole one way 5A SP 230 Volts complete all as specified/ directed.

Supply and fixing ceiling fans complete with blades, down rods and accessories, alongwith PVC flexbile pipe from ceiling rose to connector input voltage 165-285 V ,28W 1200 mm sweep, 360 RPM, Min air delivery 235 M3/Min CFM with LED indication for speed, service value 6.00 BEE, of 5 years on site warranty for all defects like winding/motor/PCB and remote with step speed control remote , Five star rated with brushless direct current motor (BLDC) including taking down of old unsv ceiling fans from same or diff locations. Make Atomberg Cat No Renesa + /CG/ Bajaj/ Havells. Note:- Contractor will submit the old ceiling fan obtanied from site to RRC complaint cell and same cost is deemed to be included in the mentioned rate. Any thing which is not included in BOQ, needed for installation of ceiling fans if required on site is deemed to be included in the quoted rate as well.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

AZIM ENTERPRISES

MODERN AGENCY

UNITED ENGINEERS

KWALITY CONSTRUCTION

SINHA ENTERPRISE

CHOWDHURY CONSTRUCTION CO

M/S L.R.ENTERPRISES