Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.2 LAccepted-AOC 23 47 25D BHAGABARI ROAD ALLAHPUR ALLAHABAD UP | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹25.2 L+₹2.3 L (10.1%)Rejected-Finance AT PO DERA COLLIERY TALCHER DIST ANGUL ODISHA PIN 759103 | ANUGUL | ODISHA | 759103 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹25.6 L+₹2.8 L (12.2%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹26.0 L+₹3.2 L (13.9%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹26.1 L+₹3.3 L (14.5%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹38.8 L
EMD Value
₹77,600
Closing Date
18 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Prayagraj
Stanley Road, Teliyarganj, Prayagraj
Spl repair to QTR (OR MD ACCN) at Akshay Vihar at OD Fort Cantt Prayagraj.
2023_MES_620707_1
8675/E8
Open Tender
Civil Works
Item Rate
180 days
Prayagraj
As Per NIT
8 documents required · 8 mandatory
₹500
GE (East) Prayagraj
₹77,600
Yes
24 Nov 2023
26 Sept 2023
20 Oct 2023
26 Sept 2023
18 Oct 2023
11 Oct 2023
Amount
Demilition of cement concrete reinforced as in chajja and similar suspended work (reinforcment cut as required to facilitate demolition) complete all as specified and directed.
M&L for Pre cast cement concrete 1:2:4, Type B1 (using 20mm graded stone aggregate) as in manhole covers etc complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Demolition of brick work built in cement or cement lime mortar complete all as specified and directed.
M&L for Brick work with fly ash old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.(Except brick) NOTE : Bricks obtained from item No. 04 above shall be used.
M&L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
Dismantling of brick tiles any size laid bedded and pointed in any mortor complete all as specified and directed.
Demolition of mud in roofs any thickness and in any position and leaping over roof terrace, removing the demolished materials to a distance exc 250 Mtr & n.exc 500m and depositing where directed complete all as specified and as directed.
M&L for Plain Cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs/padding and finishing the surface fair & even complete all as specified and as directed.
M&L for screed bed or bedding layer 10mm thick in CM (1:4) over roof slab mixed with water proffing compound (WPC shall be measured and paid separately) as per manufacture's instructions finished even & fair complete all as specified and directed.
M&L for roof treatment over roof comprising the following including taking down existing roof treatment tratment of any type from roof slabs and dismantling of floor, lime teracing as required, cleaning of surfaces by wire brushes, brooming, removing dust and applying following :- (a) Bitumen primer conforming to IS-3384-1965 @ 0.50 kg per sqm. (b) Applying a tack coat of hot blown bitumen 85/25 @ 1.20 kg per sqm conforming to IS-702-1998 for water proofing membrane. (c) Applying of APP water proofing membrane weight not less that 3 kg per sqm over entire area with overlaps and sealed all as specified and directed. (d) Again applying a tack coat of hot blown bitumen 85/[email protected] kg/sqm over water proofing membrance. (e) Dusting dry sand @ 0.75 kg per sqm over water proofing membrance (f) Cement concrete tiles 250mm x 250mm x 25mm thick, machine pressed set jointed and pointed in neat cement slurry in floors and cut and polished built with grey cement and no pigment over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Coloured non - skid joint free Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
All as per item No. 14 above but as in vertical surfaces such as skirting/ dado over and including rendering layer 10 mm thick in CM (1:4)
M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in coloured cement to match tiles over and including 10 mm thick rendering layer in CM (1:4) complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. .
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base 20mm thick cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and pre polishing complete in machine cut, bedded, jointed and pointed with grey cement slurry including cutting and polishing complete all as specified and directed.
All as per item No. 19 above but as in vertical surfaces such as in riser of steps, skirting, dado and pillar laid over and including rendering layer 10 mm thick in CM (1:4)
M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade as in machine cut, bedded, jointed and pointed with grey cement slurry including cutting and polishing complete all as specified and directed.
All as per item No. 21 above but as in vertical surfaces such as skirting/ dado over and including rendering layer 10 mm thick in CM (1:4)
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for Rounding (half round) to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl chequrred tiling and paver blocks complete all as specified and directed.
M&L for 25mm thick Cement concrete 1:2:4 type B-0 (using 12.5mm graded aggregate)in levelling course of floor finished complete all as specified and directed.
M&L for 1st quality non skid coloured ceramic Heavy duty garden/parking tiles (ENDURA type), area of each tile n.exe 0.11 sqm, 10mm thick set jointed and pointed in neat cment slurry in floors with coloured cement to match in floor over and including 15 mm thick screed bed in CM(1:4) as in open area complete all as specified and directed.
M&L for 75 mm thick plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in plinth protection, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 100 mm thick plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) in levelling course for floor or ENDURA tiles in open area benching etc, finished even and rough for receiving finishind surface complete all as specified and directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar(1:4) on fair faces of brick work or concrete surfaces (external) & mixed with water proffing compound (WPC shall be measured and paid separately) as per manufacture's instructions, finished even and fair complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces (internal), finished even and fair complete all as specfied and directed.
M&L for rendering 5 mm thick in cement mortar (1:3) on concrete surfaces in ceiling, finished even and smooth complete all as specfied and directed.
Supply only liquid integral water proofing compound complete all as specified and directed.
M&L for Preparing of new plastered or unplastered surfaces of walls and applying two coats of cement base paint in approved colour/shade over a coat of primer complete all as specified and directed.
M&L for Preparing of old plastered or unplastered surfaces of walls and applying two coats of cement base paint in approved colour/shade over a coat of primer complete incl removal of existing treatment from walls (any number of layers) by scrapping with machenical scrapping machine, including filling depressions of scrapped surfaces complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper smooth wall finish in approved colour/shade over a coat of primer incl 1mm wall care putty after preparation of surfaces complete all as specified and directed.
M&L for prepairing old decorated plastered surfaces of wall including cornices,pilastered etc. and applying two coats of Oil bond distemper over one coat of primer incl 1mm wall care putty on wall surface complete removal of existing treatment from walls (any number of layers) by scrapping with machenical scrapping machine, including filling depressions of scrapped surfaces complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for complete removal of existing treatment (any number of layers) from old surfaces of ceiling and applying two coat of white wash complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning for refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) on wall surface complete all as specified and directed.
S&F 110mm PVC (SWR) pipes single socketed , in any length with rubber ring, joints, laid in trenches or in floors complete all as specified and directed.
S&F 110mm PVC (SWR) pipes single socketed , in any length with rubber ring, joints,fixed to walls complete all as specified and directed.
S&F 75mm PVC (SWR) pipes single socketed , in any length with rubber ring, joints, laid in trenches or in floors complete all as specified and directed.
S&F 75mm PVC (SWR) pipes single socketed , in any length with rubber ring, joints, fixed to walls complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends with access door complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends with access door complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single (Single T)equal or unequal with access door complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single (Single T)equal or unequal with access door complete all as specified and directed.
S&F 110mm PVC (SWR) Vent cowl complete all as specified and directed.
S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrte type B1 (1:2:4) suitable for 75mm bore pipe complete all as specified and directed.
S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof as in 110mm dia bore complete all as specified and directed.
S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof as in 75mm dia bore complete all as specified and directed.
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
Taking up or down 15mm dia bore of steel tubing and connections, including cleaning for refixing or removal to store from walls and ceiling or laid in floors complete all as specified and directed.
Taking up or down 20mm dia bore of steel tubing and connections, including cleaning for refixing or removal to store from walls and ceiling or laid in floors complete all as specified and directed.
Re-fixing old steel tubing 15mm dia bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.
Re-fixing old steel tubing 20mm dia bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.
S&F GI steel tubes 15mm dia bore , medium grade with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F GI steel tubes 20mm dia bore , medium grade with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repairs 15mm size bib taps, cast copper alloy, chromium plated fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs 15mm size angular cock, cast copper alloy, chromium plated fancy type with capstan head, screwed down, screwed both end for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, white coloured, with integral foot rests, including provision of lime concrete bedding complete all as specified and directed.
S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe , complete all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.50 mm thick sheet glass shelf 12 cm wide chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repairs Vitreous china wash basin with padestal pattern, white, flat back, size 550x400 mm excluding pillar cock but including brackets waste coupling of 32 mm size and cutting for and pinning in ends of brackets,complete all as specified and directed.
Spply only 15mm size pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. Note : Labour component for fixing is deemed to be included in quoted rates for item No. 68 above.
S&F in repair Brass chromium plated shower rose 125 mm size with swivel joints, complete all as specified and directed.
S&F in repairs 15mm size stop valve, cast copper alloy, chromium plated fancy type with capstan head with long cup and shank (concealed type) screwed down, screwed both end for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked double layered, hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210 gms) complete all as specified and directed.
S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.
S&F in repair 20mm dia bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) and nipple suitable for HDPE water tank. (Minimum weight 45gms), complete all as specified and directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repair 40mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.complete all as specified and directed.
S&F in repair Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges including brackets complete all as specified and directed.
S&F in reapir brass chromium plated soap dish complete all as specified and directed.
Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for sunken floor treatment comprising the following including taking down existing treatment of any type and dismantling of floor, lime teracing as required, cleaning of surfaces by wire brushes, brooming, removing dust and applying following :- (a) Bitumen primer conforming to IS-3384-1965 @ 0.50 kg per sqm. (b) Applying of APP water proofing membrane weight not less that 3 kg per sqm over entire area with overlaps and sealed all as specified and directed. (c) Applying a tack coat of hot blown bitumen 85/25 @ 1.20 kg per sqm conforming to IS-702-1998 for water proofing membrane. (d) Again applying a tack coat of hot blown bitumen 85/[email protected] kg/sqm over water proofing membrance. (e) Dustingdry sand @ 0.75 kg per sqm over water proofing membrance complete all as specified and directed.
M&L for Plain Cement concrete, 1:5:10, type E2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete in sunken floor portion complete all as specified and directed.
Taking down chowkhat with shutters (with out taking off shutters from the frame) n exc. 1.50 Sqm complete all as specified and directed.
Taking down chowkhat with shutters (without taking off shutters from the frame) exc. 1.50 Sqm but n exc. 4 Sqm complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified by the manufacturer complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
S&F 125 x 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.
S&F 105 x 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in bed block and filling in door frame complete all as specified and directed.
S&F Flush shutters 30mm thick, solid core consturction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 2nd class HW glazed and skeleton shutters for doors, 35mm thick, open rebated and prepared to receive glass or gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered bead for securing glass/gauze etc size of shutter as specified in SSR part I section 8, clause 8.24(a) complete all as specified and directed. and directed
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
S&F Aluminium handles, cast type anodised 150mm size complete all as specified and directed.
S&F 200 mm long alluminiuml tower bolt, complete all as specified and directed. and directed.
S&F Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F butt hinges, medium weight, cold rolled stainless steel, 100 mm size complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. and directed
M&L for preparing new surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing new steel & iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparing old painted steel & iron surfaces of any description over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
S&F anodised aluminium powder coated (minimum thickness of powder coating not less than 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed
S&F anodised aluminium powder coated (minimum thickness of powder coating not less than 50 micron) three track sliding window shutters, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and directed. and directed
S&F anodised aluminium powder coated (minimum thickness of powder coating not less than 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and directed. and directed
S&F 5.5mm thick plain sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm in each panes complete all as specified and directed.
S&F 5.00mm thick Figured glass,(Frosted) pin headed type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.
S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed.
S&F Hasp and staple 150 mm size, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate, fixed with screws complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) , Fe 410 -W (GdeE- 250) quality A complete all as specified and directed.
M&L for Cutting holes into or through brick walls built in cement mortar superficial area n. exc 150 sq. cm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 30mm (when open) complete all as specified and directed.
M&L for Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' as in Size of gully traps in mm 150mm x 100mm setting and jointing in neat cement mortor (1:1) complete all as specified and directed.
M&L for 18mm thick coloured prelaminated PVC ply fixed with screws, solvent cement/ adhesive to make wall mount kichen cabinet back and pull out drawer sides as per specifications and drawing complete all as specified and directed .
S&F in repair glass/fibre three tier corner shelf assembly consisting of 5.50 mm thick sheet pvc shelf 7.5 cm wide chromium plated bracket guard and railing 40 cm long complete all as specified and directed.
S&F in repairs Stainless steel plate rack (utensil rack) of size (600mm x 750mm) and depth 300mm made with 0.63mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts fixed complete all as specified and directed.
Taking down carefully aluminum/copper point wiring (light fan socket or power) complete and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed. keeping aside serviceable items for reuse with in the same bldg and removing U/S items from site.
M&L in repairs for point wiring in concealed PVC conduit complete including necessary chasing, cutting with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) multi stranded copper conductor single core and including non metallic concealed PVC conduit not less than 20 mm dia with concealed in wall pressed steel terminal boxes not less than 1.6 mm thick of reqd size (factory made) with top cover 3 mm thick of plastic laminated sheets of required colour painting terminal boxes inside and outside with two coats of block bituminous paint over a coat of red oxide primer complete with all accessories and including PVC insulated and unsheathed cable 1.5 sqmm (nominal area) stranded copper conductor single core of green col our as earth wire to common earth and connected to earth dolly drawn in same concealed conduit incl making good disturbed surfaces and finished to match with existing surface complete all as specified for the following:
All as per item No. 119 above One light/fan/exhaust fan point controlled by one switch
All as per item No. 119 above but with 2.5 Sqmm cable for one 5 pin 5 Amp socket outlet point on the same board with other switch.
All as per item No. 119 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm.
One 15 Amp socket outlet on Independant board but with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) multi stranded copper conductor single core including PVC insulated 2.5 sq mm stranded copper conductor green colour as earth wire complete all as specified and directed.
S&F in repairs switch piano, single pole one way 5 Amps 240 Volt complete all as specified and directed.
M & L for switch piano fiush button single pole one way 15 amps 240 volt complete all as specified and directed.
M & L for socket 5 amps 5 pin flush type , 230 volts complete all as specified and directed.
M & L for socket 15 amps 6 pin flush type , 230 volts complete all as specified and directed.
M&L ceiling rose three terminals/ PVC/ polycarbonate, isolated body on PVC board complete all as specified and directed.
S&F in repairs for LED tube light fitting 1 x 20 watt, decorative , ultra slim round profile LED lighting fixture with co extruded polycarbonate body , environmental friendly , energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on wall firmly complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S & F in replacement lamp holder insulated body PVC/ Polycabonate type with back plate suitable for batten/angular/pendent holder fittings including lamp 9W complete all as specified and directed
S&F in replacement for wall mounting light fitting polycarbonate body, decorative type unbreakable with LED lamp 9 Watt and making connection complete all as specified and directed.
S&F in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required or directed by engineer-in-charge complete all as specified and directed.
S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 A complete all as specified and directed.
S&F in replacement sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. (Note-MCBs will be measured separately.)
S & F in replacement MCB single pole 240 volt any rating from 6 to 40 amps , with rupturing capacity 10 KA , inculding providing thimble for out going cable complete all as specified and directed.
S & F in replacement MCB SPN 240 volt any rating from 6 to 40 amps , with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed.
Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawing into existing conduit and connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC riged conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.
Taking down carefully ceiling fan/ exhaust fan by disconnecting all electrical connection and refixing the same including electric connection wire 3 core 23/0.0076 copper conductor including one coat of synthetic enamel paint and marking MES no with paint after necessary repair work complete all as specified and directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. fixing on wall/pole with GI pipe bracket made of GI pipe 25 to 40 mm light grade 1.2 m long bent to shape and grouting on wall with necessary MS nuts, bolts and washers complete all as specified and directed.
Earthing complete with steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel earthwire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit made from PCC (1:2:4) type B-1(using 20mm graded stone aggregates) with 17mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 No and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom, 1.75 metre long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 17mm x 8mm FI with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No.5 of SSR Part-I connected to earth test point all as specified or indicated including testing on completion.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including cutting of suitable hole for exhaust fan and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed.
M/S A P CONSTRUCTION
KHALSA BUILDER
Hi-Tech Constructions
M/S JAI DURGA CONSTRUCTION
shweta constructions
creative construction co.
vs construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .