8890 SPECIAL REPAIRS TO BLDG NO P-71 (SHIVAJI HALL) AT MINTSD UNDER GE (SOUTH) PUNE

Amount

Dismantling plain or corrugated, steel sheeting /AC Sheet of any gauge., thickness in roof coverings complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S & F Rolled Mild Steel roof trusses (framed), trussed, purlins, rails and fastenings etc.,confirming to Fe 410 - S including distance pieces, cleats, etc. complete all as specified and as directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an clour having tensile strength of 550Mpa asm in roof covering/cladding to wall, fixed with selt tapping screws complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as of roof covering/ridges fixed with self tapping screws complete all as specified & directed.

Dismantling boarding/ceiling of any description, fixed in any position like partition etc with nails including frame work of timber complete all as specified and as directed.

S&F PVC false ceiling consisting of 595 X 595 mm, 5mm thick plain exposed PVC sheet of 600 kg/cum density manufactured by an ISO certified company, used as panel inserted in a frame work made from anodised aluminium T-section of sizes 25X25mm 19 gauge or 1mm thick in square pattern of grid 600X600mm.The minimum frame work supported from the ceiling with 'J' hooks and GI wire/6mm MS rod of required size to maintain proper level etc.The aluminium frame work is supported on side wall with the use of alum 'L' section of 25X25mm angles etc complete all as specified and as directed by engr-in-charege and as approved by GE. (Make : M/s Rajshree / Armstrong / Syntex as approved by GE)

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 595 x 595 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed.

Dismantling of perforated particle board / slab incl fillets works tiles for insulation and acoustic purpose of any thickness complete all as specified and as directed.

M&L for providing and fixing of Anutone panel of size 2400 x 600 x 25mm ND 4 with Anutone strut H-spline,which will comprise to NRC 0.9 Anutone soak panel is to be installed on Anutone strut SC 48 frame work and meet the stringent fire test required having class P taking for lgnitability test as per BS 476 part 5 and class-1 are the heighest rating. BS part 6 fire progation index and for flaming ISO 1182 and smoke density as per ASTM E 662 beside base index confirm to EN 13168 2000 with complete Anutone strut frame as per installation details given complete as specified and directed. [NOTE : Any irregularity in surface where wall panelling is to be done by making surfaces good in cement plaster and rates for the same is deemed to be inclusive of quoted rates] (Make :- Anutone, / Accoustic india Pvt Ltd / Arm Strong as approved by GE)

Removing of old water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc 500m complete all as directed by Engr-in-Charge

M&L for water proofing treatment to RCC roof slabs, walls, chajjas etc shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc by brooming with broom sweeping free from dust etc and evenly applying a coat of approved bituminous primer @ 0.20 Kg/Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane non woven, polyster weighing not less than 3.5 Kg/Sqm with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engineer-in-Charge. Carrying out test by flooding water for 24 hrs for leakage and seepage and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkat with shutter without taking out shutter from the frame not exc. 1.5 Sqm complete all as specified and as directed.

Taking down chowkat with shutter without taking out shutter from the frame exc 4 Sqm and not exc 6 Sqm each complete all as specified and as directed.

Taking down chowkat with shutter without taking out shutter from the frame exc. 1.5 and not exc 4 Sqm each complete all as specified and as directed.

Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each and refixing in same opening complete all as specified and as directed..

S & F Aluminium anodised Powder coating of ivory/brown colour frame / shutters for windows/doors/Ventilator with one or more rebates including joining cleat, glazing clips, anodised aluminium snap beading for fixing, screws, anodised aluminium fittings such as peg stays, handle etc complete all as specified and directed.

M&L for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” or of equivalent approved make of aluminium section including glass and stainless steel wire mesh etc complete all as specified and directed by Engineer-in-Charge. (a) SP 20048 (b) Glazing clips 19352

S&F Aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock, handle, 5mm thick plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm thick laminated particle board as bottom pannel both side laminated using following sections as given in 'JINDAL' catlogue or of equivalent approved make complete all as specified and as directed. (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & bottom 20844

S&F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140mm size overall of ISI mark complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification complete all as specified and as directed by Engr-in-Charge.

Supply and fix for factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded Prelaminated PVC sheet on the front face and 2mm prelaminated colour PVC sheet on back face, fixed in frame at site as per specification and drawing including fittings complete all as specified and as directed.

S & F 100 mm butt hinges, extruded aluminium alloy type B-21 with galvanised mild steel ISI marked hinge pin, anodised and fixed with wooden screws complete as specified and directed.

S&F Aluminium anodised 150mm handle cast type, complete as specified and directed.

S&F aluminium anodised barrel tower bolt 200mm length of extruded section and fixed complete all as specified and as directed.

S&F aluminium alloy sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm of ISI mark complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floor apron etc laid bedded and pointed in cement mortar complete all as specified and as directed..

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for

M&L for 25 mm thick plain cement concrete type B-1 (1:2:4) (20 mm graded stone aggregate) as in floors complete all as specified and as directed.

Taking down carefully the existing chairs fitted with nut and bolt, keeping the chairs in safe cusotdy against any type of damage and refixing the same chairs at the same position after repairing the floor by providing four number nuts and bolts per chair complete all as specified and as directed. (Note : for fixing the Nuts are required to be embedded in floor)

M&L for granite 16 - 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but n.exc 0.38Sqm in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed or bedding layer 15mm thick in CM 1:6 complete all as specified and directed.

Material and labour for coloured glazed ceramic tiles of size 300mm x 600mm x 7 to 8mm thick of colour and pattern as approved by EIC, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over back coat complete all as specified and as directed.

M & L for Glazed Vitrified tiles (GVT) 10 to 15mm thick (Square/rectangular) of size 600 x 1200 mm in floor, etc set & jointed in neat cement slurry and pointed in white or coloured cement to match fixed over screed bed or bedding layer complete all as specified and directed .

M & L for Multicolour Glazed Vitrified Wooden tiles (GVT) 10 to 15mm thick (Square/rectangular) of size 600 x 1200 mm in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match fixed over screed bed or bedding layer complete all as specified and directed.

M&L for Screed bed or bedding layer 15mm thick in CM 1:6 complete all as specified and directed .

M & L for Polished Stone Pattern Exterior Elevation tiles 12 to 15mm thick (Square/rectangular) in wall cladding/ dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match fixed over back coat as per sample kept in AGE B/R-II Office complete all as specified and directed .

M&L for plastering / backing coat of 10mm thick in CM 1:4 complete all as specified and directed .

Dismantling of PVC water tanks of capacity upto 1000ltr capacity including removing to store and all as specified and directed by Engr-in-Charge.

Disconnecting existing tanks of Cap exc 1000 ltr but n. exc 2000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in same/ other position completer complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tank of 1000 ltr capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge.

Demolition of stone / block masonry /brick masonary built in CM complete all as specified and as directed.

M&L for Brick work with Fly ash brick, straight or curved on plan exc 6mtr Mean radius built in type CM 1:6 complete all as specified and directed by Engr-in-Charge.

Taking down cement or cement lime plaster on brick or stone wall etc. incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10 mm thick in cm 1:3 on fair faces of brick work or concrete surface in ceiling of roof, chajja and facia etc. complete all as specified and as directed.

M&L for rendering 10mm thick plaster in ready mix in cement mortar (1:6) on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. (Make:- ACC's"Acco plast" / CK Birla's "Aerocon" / "Magic plast" or equivalent)

Material and labour for 15 mm rendering in ready mix cement mortar (1:4) using water proofing compound @ 2% by weight of cement in finish coat on other than fair faces of brick wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed. (Note:- water proofing compound shall be measured and paid separately.) (Make :- ACC's "Acco plast" / CK Birla's "Aerocon" / "Magic plast" or equivalent)

M & L for 2mm thick wall care putty on wall complete all as specified and directed by Engr-in-Charge.

M & L for 2mm thick wall care putty on ceiling complete all as specified and directed by Engr-in-Charge.

M&L for Complete removal of existing treatment on walls by scrapping washing rubbing down etc and applying two coats of Exterior emulsion paint over a coat of primer all as specified and directed

M&L for Preparation of new plastered surfaces of wall and applying two coats of Exterior emulsion paint over a coat of primer all as specified and directed

M&L for Preparation of old painted surfaces of wall and applying two coats of Plastic emulsion paint complete all as specified and directed

M&L for Preparation of new plastered/putty surfaces of wall and applying two coats of Plastic emulsion paint over a coat of primer all as specified and directed

M&L for Preparation of new plastered/putty surfaces of ceiling and applying two coats of OBD over a coat of primer on ceiling all as specified and directed

M&L for Preparation of old painted surfaces of ceiling and applying two coats of OBD on ceiling complete all as specified and directed

M&L for Preparation of old steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed.

M&L for preparation of new steel surface of any description not otherwise described over 10 cm width or girth and applying, two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed

S&F vitrous china wash hand basin with pedestal snow white 630x480mm flat back inclduing and providing waste pipe 40mm dia medium grade, CP brass waste coupling 32mm dia with check nut washer etc fixed in repairs all as diected by EIC. [Make : Cera of cat no S2090109 or equivalent model in) Hindustan Sanitary Ware Industries (1st quality) (Hindware only) /Parry Ware (Super fine) as approved by GE]

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia complete all as specified and as directed.

Cutting chases, pinning in, making good to fancings where required and pointing in cement mortar 1:3 to edges or edges of landings, steps, cills etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10 cm girth in Brick walls complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia complete all as specified and as directed.

S&F in repairs GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed.

M & L for GI tubing 20 mm dia medium grade with all fitting & fixed complete to wall & Ceiling or laid in floor complete all as specified and as directed.

S&F in repair cast iron Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repairs PVC CARRIE twin flushing cistern 10 Ltr capacity low level snow white with inlet valve , float handle, inlet and out let connection, bend pipe complete all as specified and directed. (Make :-Cera cat No B1020104 or equivalent as approved by GE)

S&F in repairs bib tap of cast copper alloys with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferule and fixed for 15mm dia pipe inclduing removing the old unserviceable bib taps fixed complete all as specified and as directed.

S&F Pillars cock with swan neck left and areator for iron pipe complete all as specified and directed (Make : Cera of cat no F2007104 or equivalent model in Jaguar/Marc/ ESS-ESS as approved by GE.)

S&F in repairs vitreous china wash down floor mounting EWC of snow white including fixing bolts etc with flat bottom including MS, CP or aluminium anodised hinges devices etc complete all as specified and directed. [Make : Cera of cat no S1050106 S trap or equivalent model in) Hindustan Sanitary Ware Industries (1st quality) (Hindware only) /Parry Ware (Super fine) as approved by GE]

M&L in repairs of plastic water closet seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and as directed. [Make : Cera of cat no B1510103 or equivalent model in) Hindustan Sanitary Ware Industries (1st quality) (Hindware only) /Parry Ware (Super fine) as approved by GE]

S&F in repairs Health faucet complete all as specified & directed. [Make Cera Cat No.F8030301 or equivalent model in Jaguar/Marc/ ESS-ESS as approved by GE.]

S&F in repairs CP toilet paper holder confirming to CAT No CAN-1151N of "Jaquar" or Equivalent make here in after.

S&F in repairs angle cock with wall flange and cup concealed type secrewed both ends for iron pipe or for unions and fixed in repairs of 15 mm dia complete all as specified & directed. [Make : Cera Cat No F2007201 or equivalent model in Jaguar/Marc/ ESS-ESS as approved by GE]

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc complete all as specified and as directed. (Note : pipe will be laid under floor)

S&F vitreous china, squatting pan, 'Orissa' pattern, size 580mm x 440mm white, with integral foot rest, including concrete bedding and including high level PVC flushing cistern 10 Litre capacity including all internal fittings, inlet, outlet pipe connections etc. complete all as specified and directed. [Make : Cera of cat no S3010104 or equivalent model in) Hindustan Sanitary Ware Industries (1st quality) (Hindware only) /Parry Ware (Super fine) as approved by GE]

S&F in repair stop valve chromium plated fancy type with long shank and cup (concealed type) cast copper alloy screwed down high pressure with capstan head or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete 15mm dia.complete all as specified and directed.

S&F in repair stop cock fancy type with long shank and cup (concealed type) cast copper alloy with capastan heads screwed down high pressure of 20mm dia complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mmcomplete all as specified and directed.

M&L for Vitreous China urinals, half stall type (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. [Make : Cera of cat no S4020107 or equivalent model in) Hindustan Sanitary Ware Industries (1st quality) (Hindware only) /Parry Ware (Super fine) as approved by GE]

S&F in repair 15mm dia brass self closing angle cock prismatic for urinal with wall flanges and 200 mm connecting pipe fixed complete all as specified and as directed. (Make : Cera cat no F9020203 or equivalent model in Jaguar/Marc/ ESS-ESS as approved by GE.)

S&F in repair urinal spreader of brass body chromium plated for fixing with 15mm dia pipe suitable for urinal complete all as specified and as directed. (Make : Cera cat no F8070201 or equivalent model in Jaguar/Marc/ ESS-ESS as approved by GE. )

S&F in repair steel grating 150mm size of ISI mark complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair aluminium powder coated decorative type curtain rod 20mm dia complete all as specified and as directed

S & F aluminium powder coated brackets suitable for 20mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out all as specified in (Soft/hard) average soil. complete all as specifed and directed.

M&L for Cement concrete 1:4:8 type D- 2,(40 mm graded aggregate) 75mm thick as sub base of floor complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, of any shape and size, conforming to IS-15658-2006 glossy finish as in floor/pavement laid on and including 75mm thick stone dust cushioning, laid dry to the profile over rammed earth/murrum filling complete all as specified and directed

M&L for PCC (1:2:4) type B-1 using 20mm graded stone agg as in coping, on top of wall, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work. complete all as specified and as directed.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 mtr depth n exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M & L 150 mm dia RCC class NP 2 pipes laid in trenches and jointed with collar complete all as specified and as directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete as specified and directed.

M&L for precast cement concrete 1:2:4, typeB1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm in soils complete all as specified and as directed.

S&F in repair stainless steel railing S-304 material made from 38mm outer dia and 16 gauge fixed using S/S 304 anchor fasteners and sturd supports in position incl flanges ect embeded in PCC 1:2:4 and including necessary buffing complete all as specified and as directed

Vijay Construction and Company

Suma Construction