Special repair to cottage No.7 at Brock Hurst Shimla

Amount

Dismantling tiled floors laid in mortar upto all floor level including stacking of serviceable materials and disposal of un-serviceable materials and disposal of un-serviceable materials with in 20 mtrs.(Twenty metres)lead (wooden/concrete joists to be measured and paid for separately)including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) For thickness of tiles upto 25mm(Twenty milimetre)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 (fifty)metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Nominal concrete 1:3:6(One cement :three sand: six graded stone aggregte) (one or richer mix (i/c equivalent design mix).

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 (fifty)metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50(fifty) metres lead as per direction of Engineer-in-charge. (i) In cement mortar.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (I) Of area 3 sq. metres(three square metre) and below

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 (fifty) metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50(Fifty) metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level. (i) Cement mortar 1 : 4 (One cement : four coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5(seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in.(i) Cement mortar 1:4 (One cement : four coarse sand) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Tile work in skirting, risers of steps and dado up to 2 m (two metre) height over 12 mm(twelve milimetre) thick bed of cement mortar 1:3 (One cement :three coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) 8 mm(eight milimetre) thick

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm(three hundred into three hundred milimetre) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty milimetre)thick cement mortar 1:4 (one Cement: four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty milimetre) thick cement mortar 1:4 (One cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) Size of tile 600x600mm (six hundred into six hundred milimetre)

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall ceiling and floor including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 15mm(fifteen milimetre) nominal bore.

Centering and shuttering including strutting, propping etc. and removal of form for : including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.(i)Shelves (Cast in situ)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) Mild steel and Medium Tensile steel bars

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (One cement : One point five coarse sand) : three raded stone aggregate 20 mm (twenty milimetre) nominal size) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.(i)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately)including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Powder coated aluminium (minimum thickness of powder coating 50 (fifty) micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) Powder coated aluminium (minimum thickness of powder coating 50 (fifty) micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i)With float glass panes of 5 mm (five milimetre) thickness (weight not less than 12.50 kg/ sqm)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (i) With stainless steel cover plate minimum 1.25 mm (One point two five milimetre) thickness

Providing and fixing Brass 100mm (One hundred milimetre)mortice latch and lock with 6 (six) levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Providding and fixing aluminium casement window fastener of required length for aluminium windows with necessary screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) Anodized (AC 15) aluminium

Providing and fixing aluminium round shape handle of outer dia 100 mm (One hundred milimetre) with SS screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) Anodized (AC 15 ) aluminium

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm (two hundred milimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. (Only weight of grill to be measured for payment).

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600.(i) Upto 10 mm(ten milimetre) depth and 10 mm(ten milimetre) width

Providing and fixing ACP sheet in door shutters with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge (cost of aluminium snap beading shall be paid in basic item) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing polycarbonated transparent sheet 2mm (two milimetre) thick in roofing with galvanised J or L hooks bots and nuts with G.I. limpet and bitumen rubber washer complete with all accessories as required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing 1.50mm(One point five zero milimetre) thick PVC antistatic venyl Flooring plain or coloured,carbed or mosaic/metalled finish laid with approved adhesive on sub-floor(damp proofing treatment to be paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.MAKE LG

Providing and fixing non wooven carpet (Unitex) of superior quality in all shade and colour of approved sample having 3.8mm(three point eight milimetre) thickness and 900 grams weight per square meter laid on floor with approved adhasive complete in all respect including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Providing and fixing byson board ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) 9mm (Nine milimetre) thick

Providing and fixing plain square edged cover fillets (beading)40mmx12mm (forty milimetre into twelve milimetre) section with wood screws in ceiling and lining including mitring at junctions including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.( i) Ist class Indian teak wood.

Providing & fixing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. ( a)2nd class Deodar wood.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (a) 40mm(forty milimetre) thick (i)2nd class deodar wood.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm (zero point five six milimetre) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.(i) 40mm (forty milimetre)thick 2nd class deodar wood.

Applying priming coat over new wood and wood based surfaces after and i/c preparing the surface by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (a)Ready mixed paint brushing wood primer pink.

Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.( a)With white enamel paint.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) 125 mm(One hundred twenty five milimetre)

Providing and fixing anodized aluminum sliding door bolts anodized colour and shade with bolts and nuts screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (a) 250x16mm (two hundred fifty into sixteen milimetre)

Providing and fixing aluminum tower bolts(barrel type)anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.(a) 200x10mm (two hundred into ten milimetre)

Providing and fixing bright finished or/and black enamelled iron (Helical door spring 150mm(One hundred fifty milimetre)) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Providing and fixing bright finished brass handles with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) 100mm (One hundred milimetre).

Providing and fixing 19mm (Nineteen milimetre) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.(a) 6mm (six milimetre) thick.

Providing and fixing 19mm (Nineteen milimetre) thick commercial board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Providing and fixing magnetic Catchers ISI marked with necessary screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Providing and fixing square edges cover fillets (beading) 19mmx6mm (Nineteen milimetre into six milimetre) section including mitring at junctions with wood screws and nails complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (a)1st class Indian teak wood

Providing and fixing 1.00mm (One point zero milimetre) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Applying priming coat over new wood and wood based surfaces after and i/c preparing the surface by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(a)Ready mixed paint brushing wood primer pink.

Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(a) With white enamel paint.

Providing and fixing Pine wood readymade plain framed panelling with necessary screws priming coat on unexposed surface etc. complete with pine wood including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing Ply wood lining with butt jointing and wood screws or nails (frame work and cover fillets to be measured and paid for separately) including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(a) 9 mm (nine milimetre) thick.

Providing and fixing 4mm thick teek ply of standard quality and of approved shade & design wall lining including fixing with approved adhesive, butt jointing and nails & screws complete (Base frame work to be measured & paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Removing old paint or polish from wood and wood based surfaces with paint remover of approved brands and manufacture and making the surface even with including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.(i)Blow lamp

Applying spirit or oil stains (any colour)on wood and wood based surfaces to given an even surfaces including cleaning the surfaces of all dirt,dust and sand papering so as to produce a smooth dry and matt surface including stopping & knotting including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Applying three coat of seelar filling on new wood and new wood based surfaces to given an even surface including cleaning the surface of alkl dirt, dust and sand papering so as to produce a smooth dry and matt surface including stopping & knotting including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Providing and fixing plastic bubble water proof sheet for moisture proof complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing PVC floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting and making goods the walls and floors including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.(i) 75mm (seventy five milimetre) nominal diameter

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (a)110 mm (One hundred ten milimetre) dia.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (a) 110 mm(One hundred ten milimetre) dia.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) 110mm (One hundred ten milimetre)dia

Painting one coat(excluding priming coat)on previously painted wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. ( i)With white enemal paint.

ii) With enamel paint other than white.

Extra over item No. 65 for every subsequent coat of paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)With white enemal paint

( ii) With enamel paint other than white.

Painting one coat (excluding priming coat) on previously painted steel and othermetal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a)With white enamel paint.

Extra over item No.67 for every subsequent coat of paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(a) With white enamel paint

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Polishing two coats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Painting two coats (excluding priming coats) on new steel and other metal surfaces with enamel paints spraying to give an even shade including cleanign the surfaces of all dirt,dust and other foregin matter including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge.(i)With enamel paint other than white

AKBAR ANSARI

babu ram

Pawn Kr

pawan kumar