Providing and laying Carpet in the LHC

Providing and fixing Flotex or equivalent high-performance flocked textile flooring, featuring a 100% Nylon 6.6 wear layer with an ultra-high density of 80 million fibres per square metre, electrostatically bonded to a completely waterproof resilient vinyl backing with dual fibreglass reinforcement for a dimensional stability of ≤ 0.10% and width roll form with a 4.3 mm total thickness and an approximate weight of 1.8 kg/m², incorporating permanent static control (< 2.0 kV), inherent stain resistance, and a Sanitized® anti-microbial treatment. Technical compliance EN 13501-1 Bfl-s1 fire rating, EN 14041 Class DS slip resistance, and ISO 10361 Hexapod appearance retention, anti-allergic performance.installation shall be approved by authorized from the manufacture under the covered by a 10 years warranty of any defect from the manfacturing . The work shall be completed in all respects, including approved color, size, and adhesive, and shall be approval by the Engineer-in-Charge/Institute.

Providing & fixing aluminium satir nosing of 8mm thickness of length 2500mm with countersunk metal screws in the finishing shall be approved by the Engineer-in-Charge/Institute.

Providing and laying Mapei Novoplan 257 or equivalent self levelling compound 3-4 mm average thickness over substrates prepared to a clean, structurally sound. The system must include mandatory priming to ensure a bond strength exceeding 1.5 MPa. 1 Materials must meet EN 13813 (CT-C25-F7) standards, delivering a compressive strength of 25 MPa Mixing requires 5.25–5.75L of water per 25kg bag using a high-shear mechanical mixer to a lump free consistency. The area should be kept free of traffic for 24 hrs and installation of final floor finish should be done afte the surface is dry and mositure free in the finishing shall be approved by the Engineer-in-Charge/Institute.