CONSTRUCTION OF CLASS ROOM AND PROVISION OF UPS AND DUAL DESK TO GOVERNMENT INDUSTRIAL TRAINING INSTITUTE AT DEODURGA TALUKA.UNDER KKRDB (MACRO) FOR THE YEAR 2024-25.RCH2416111663 (SCP),RCH2416112664 (TSP),RCH2416113665 (GEN)

Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dr...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112)

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for isolated footings 8%. (PWD CSR VOL I for the year 2023-24. Sl. No. 1(a) P.No. 111)

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) 70% (PWD CSR VOL I for the year 2023-24. Sl. No. 9 P.No. 111)

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for Plinth Beams of Buildings 50%. (PWD CSR VOL I

for the year 2023-24. Sl. No. 2 P.No. 111)

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) 70% (PWD

CSR VOL I for the year 2023-24. Sl. No. 9 P.No. 111)

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112)

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112)

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slabs 50% (PWD CSR VOL I for the year 2023-24. Sl. No. 15 P.No. 112)

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for Chejjas, Canopy & Other Architectural projections of minor sections 45% (PWD CSR VOL I for the year 2023-24. Sl. No. 19 ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (PWD SR for Buildings VOL II...

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.74.1 P.No. 107...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.58 P.No. 105)

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.62 P.No. 105)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

VITRIFIED GLAZED SKIRTING

Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PW...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including riming coat of exterior primer applied @ 2.20 kg/10 m²) with pain...

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. (PWD SR for Buildings VOL II for the year 2...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Electrification Works

Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick

confirming to IS 2509 with suitable size bends, metal/PVC junction

boxes, adhesive paste etc., and running before concreting the ...

Supplying heavy gauge PVC Conduit Pipe 19 20mm dia 2mm thick with suitable size bends metal junction boxes adhesive paste etc by groove cutting in the wall and fixing by bracing U or J hooks and cemen...

Point wiring using Copper wire without switch.Supplying and

wiring adopting loop system in existing PVC Conduit casing

capping casing capping using 2x1.5Sqmm (Phase&Neutral)

&1x1.0sqmm(Earthwire) FRLS...

Medium point above 3Mtr upto 6Mtr from tapping point to out

let via switch box

PWD Electrical SR 2023-24, Page No-05, It No- 2.2.2

Long point above 6Mtr upto 10Mtr from tapping point to out

let via switch box

PWD Electrical SR 2023 24 Page No 05 It No 2.2.3

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand Copper with low conductor resistance

single core wire in open or concealed system of wiring with

specified IS...

PWD Electrical SR 2023-24, Page No-05, It No- 2.3.3

Supplying And fixingreplacing of 6/16/32A electricalaccessories

on existing switch board.6A Batten HolderPWD Electrical SR 2023-24, Page No-10, It No- 3.14.7

Supplying 6A flush type socket and 6 amps flush type SP switch

either surface/flush mounting in existing gang box or in 4mm thick

plastic sheet and fixing over a flush mounted wooden box and

Supplying and fixing of modular switch & connected accessories

on existing modular switch plate as per IS 3854 and IS 1293

Stepped fan regulator. Two Module

PWD Electrical SR 2023-24, Page No-9, It No...

16Amps one way switch.

PWD Electrical SR 2023-24, Page No-9, It No- 3.6.7

Supplying and flush mounting powder coated / galvanized metal

box suitable for mounting modular switch plates. The box should be

firmly flush mounted after due groove cutting in Brick/Stone/C.C

PWD Electrical SR 2023-24, Page No-8, It No- 3.4.5

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with

required nos. of machine screws, bolts nuts etc., complete on the

PWD Electrical SR 2023-24, Page No-8, It No- 3.5.5

Supplying and fixing of slim patty fitting, made out of CRCA Sheet

metal body with locking type holder completely wired. Excluding

Ballast & Fluorescent Tube. 1 x 4' Tube light fitting.

PWD Electrical...

Supplying and fixing/replacing of fluorescent tube. 18 to 40W

PWD Electrical SR 2023-24, Page No-48 , It No- 12.12.1

Supplying capacitor type ceiling fan complete with down rod

blades, shackle, canopies etc., for operation on 230 volts,50 cycles.

Single phase AC supply conforming to ISS-374-1979 and with

Fixing a ceiling / Wall mounting fan of all capacities and all types

to the existing 'S' hook with fan regulator to the existing board

together with supplying and fixing 5 amps. Ceiling rose, necessar...

Supplying and fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and 'C' Type

curve, indicator ON/OFF, energy cross-3 with Short circuit breaking

PWD Electrical SR 2023-24, Page No-17, It No- 5.18.4

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to

20A single phase Class-1 Accuracy with Temper Proof Energy

Meter. PWD Electrical SR 2023-24, Page No-19, It No 5.30

GEM PORTAL ITEMS (NON-SR RATES)

Online UPS 30KVA with Batteries of Backup Time 30 Minutes

Desk and Bench (Integrated) 3 Seater - Dual Desk

CONSTRUCTION OF CLASS ROOM AND PROVISION OF UPS AND DUAL DESK TO GOVERNMENT INDUSTRIAL TRAINING INSTITUTE AT DEODURGA TALUKA.UNDER KKRDB (MACRO) FOR THE YEAR 2024-25.RCH2416111663 (SCP),RCH2416112664 (TSP),RCH2416113665 (GEN)

Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick

confirming to IS 2509 with suitable size bends, metal/PVC junction

boxes, adhesive paste etc., and running before concreting the ...

Online UPS 30KVA with Batteries of Backup Time 30 Minutes

Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dr...

Desk and Bench (Integrated) 3 Seater - Dual Desk

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Supplying heavy gauge PVC Conduit Pipe 19 20mm dia 2mm thick with suitable size bends metal junction boxes adhesive paste etc by groove cutting in the wall and fixing by bracing U or J hooks and cemen...

Point wiring using Copper wire without switch.Supplying and

wiring adopting loop system in existing PVC Conduit casing

capping casing capping using 2x1.5Sqmm (Phase&Neutral)

&1x1.0sqmm(Earthwire) FRLS...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Medium point above 3Mtr upto 6Mtr from tapping point to out

let via switch box

PWD Electrical SR 2023-24, Page No-05, It No- 2.2.2

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112)

Long point above 6Mtr upto 10Mtr from tapping point to out

let via switch box

PWD Electrical SR 2023 24 Page No 05 It No 2.2.3

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand Copper with low conductor resistance

single core wire in open or concealed system of wiring with

specified IS...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

PWD Electrical SR 2023-24, Page No-05, It No- 2.3.3

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying And fixingreplacing of 6/16/32A electricalaccessories

on existing switch board.6A Batten HolderPWD Electrical SR 2023-24, Page No-10, It No- 3.14.7

Supplying 6A flush type socket and 6 amps flush type SP switch

either surface/flush mounting in existing gang box or in 4mm thick

plastic sheet and fixing over a flush mounted wooden box and

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for isolated footings 8%. (PWD CSR VOL I for the year 2023-24. Sl. No. 1(a) P.No. 111)

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying and fixing of modular switch & connected accessories

on existing modular switch plate as per IS 3854 and IS 1293

Stepped fan regulator. Two Module

PWD Electrical SR 2023-24, Page No-9, It No...

16Amps one way switch.

PWD Electrical SR 2023-24, Page No-9, It No- 3.6.7

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) 70% (PWD CSR VOL I for the year 2023-24. Sl. No. 9 P.No. 111)

Supplying and flush mounting powder coated / galvanized metal

box suitable for mounting modular switch plates. The box should be

firmly flush mounted after due groove cutting in Brick/Stone/C.C

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

PWD Electrical SR 2023-24, Page No-8, It No- 3.4.5

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for Plinth Beams of Buildings 50%. (PWD CSR VOL I

for the year 2023-24. Sl. No. 2 P.No. 111)

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with

required nos. of machine screws, bolts nuts etc., complete on the

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) 70% (PWD

CSR VOL I for the year 2023-24. Sl. No. 9 P.No. 111)

PWD Electrical SR 2023-24, Page No-8, It No- 3.5.5

Supplying and fixing of slim patty fitting, made out of CRCA Sheet

metal body with locking type holder completely wired. Excluding

Ballast & Fluorescent Tube. 1 x 4' Tube light fitting.

PWD Electrical...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112)

Supplying and fixing/replacing of fluorescent tube. 18 to 40W

PWD Electrical SR 2023-24, Page No-48 , It No- 12.12.1

Supplying capacitor type ceiling fan complete with down rod

blades, shackle, canopies etc., for operation on 230 volts,50 cycles.

Single phase AC supply conforming to ISS-374-1979 and with

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Fixing a ceiling / Wall mounting fan of all capacities and all types

to the existing 'S' hook with fan regulator to the existing board

together with supplying and fixing 5 amps. Ceiling rose, necessar...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts 60% (PWD CSR VOL I for the year 2023-24. Sl. No. 14 P.No. 112)

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying and fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and 'C' Type

curve, indicator ON/OFF, energy cross-3 with Short circuit breaking

PWD Electrical SR 2023-24, Page No-17, It No- 5.18.4

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slabs 50% (PWD CSR VOL I for the year 2023-24. Sl. No. 15 P.No. 112)

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to

20A single phase Class-1 Accuracy with Temper Proof Energy

Meter. PWD Electrical SR 2023-24, Page No-19, It No 5.30

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding for Chejjas, Canopy & Other Architectural projections of minor sections 45% (PWD CSR VOL I for the year 2023-24. Sl. No. 19 ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (PWD SR for Buildings VOL II...

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.74.1 P.No. 107...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.58 P.No. 105)

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (PWD SR for Buildings VOL II for the year 2023-24. I. No. 12.62 P.No. 105)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

VITRIFIED GLAZED SKIRTING

Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PW...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including riming coat of exterior primer applied @ 2.20 kg/10 m²) with pain...

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. (PWD SR for Buildings VOL II for the year 2...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...