GE S U 15 2022 23 SPECIAL REPAIR TO SECURITY WALL AND ALLIED WORKS AND PROVN OF ALUMINIUM DOOR WINDOW AND CERTAIN B R WORK IN BUILDING NO CP 18 CP COLONY UNDER AGE BR II OF GE SOUTH UDHAMPUR

Amount

Demolition of brick/PCC block or stone masonary including all necessary arches, pillars, quions etc built in cement mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Dismantling old unserviceable barbed wire/fencing wire mesh including removing from site complete all as specified and as directed.

Demolition of cement concrete un-reinforced of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforced cement concrete work of any description not specifically provided including cutting down reinforcement complete all as specified and as directed.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out any type of soil complete all as specified and as directed.

Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation complete all as specified and as directed.

Flat form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter fair finished surfaces of concrete complete all as specified and as directed.

Reinforced cement concrete M-25 (Design mix) (using 20 mm graded crushed stone aggregates) using footing, foundation beams, plinth beam, roof beam, lintel band, retaining wall/toe wall and similar work etc. complete all as specified and as directed.

Use & waste of form work to pillars, coloumn and similar work etc rough finished surfaces square, retangular and polygon complete all as specified and as directed.

Reinforced cement concrete M-25 (Design mix) (using 20 mm graded crushed stone aggregates) using columns, pillars and similar work etc. complete all as specifed and as directed.

Formwork for rough finished to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Reinforced cement concrete M-25 (Design mix) (using 20 mm graded crushed stone aggregates) using beam, cantilevers, bressummers, lintels and similar work complete all as specified and as directed.

Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

All as per Srl item No. 14 above, but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and as directed.

Taking down cement plastering on concrete walls including taking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Brick work with sub class 'B' brick straight or curved on plan exc 6 m radius in CM 1:6 as in brick work/brick pillars etc complete all as specified and as directed.

Stone masonry random rubble un-coursed well bounded bedded and solidly hearted in CM 1:6 complete all as specified and as directed.

All as per Srl item No. 18 above, but except stone complete all as specified and as directed.

18/20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and as directed.

Providing cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in lintels up to 1.5m clear span, cills,seismic and other similar bands, plinth courses, copings, Bed blocks and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M & L for broken glass coping in CM 1:3 on top of walls complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick or concrete surfaces in CM 1:4 and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Raking out joints/ pointing squared rubble masonry, coursed or uncoursed, random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and as directed

Raised pointing to random or polygonal rubble masonary coursed or un coursed in CM (1:3) complete all as specified and as directed.

Prepration of newly wall surfaces and applying two coats of cement base paint over a coat of alkali resistance primer with curing properly complete all as specified and as directed.

Hand packing (any thickness) of broken stone or boulder at back of walls over arches etc and raising (or lowering) to the required level complete all as specified and as directed.

110 mm dia PVC (SWR) pipes single stack in any length as in weepholes of retaining wall complete all as specified and as directed.

Mild steel conforming to Fe-290 Gde E-165 angle post or struts in fencing fixed independently including cutting and bending to shape as directed drilling holes, notching for wire etc. complete all as specified and as directed.

Framed work such as grills, gratings & door etc..with ends of bars shouldered and/or riveted,or forged into spikes;walk ways; railings; and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Material and labour preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide chrome primer complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm thick as in soft/loose soil complete all as specified and as directed.

Removing excavated soil to a distance exc 50m and n.exc 1.50 Km out side MoD land complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling of old AC sheet complete all as specified and as directed.

Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of post including securing and tying at crossing with and provision of galvanised mild steel wire staple or steel pins etc complete all as specified and as directed. (Note : Each line wire to be mesured)

Concertina coil 500mm dia and 150mm prolong fixing to any type of standard rails including screwing in position complete all as specified and as directed.

Taking down frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each including iron mongry complete all as specified and as directed.

Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm each including iron mongry complete all as specified and as directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and as directed.

Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in verticle surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

Vitrified Dura stone tiles of size 300mm x 300mm x 10mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, including jointing with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and as directed

Anodised aluminium Partition, ventilator shutters, window/ fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Rendering 15mm thick in CM 1:6 on fair faces of brick/concrete finished fair and even without using extra cement complete all as specified and as directed.

Rendering 5 mm thick on fair faces of concrete finished fair and even without using extra cement in cement mortar 1:3 complete all as specified and as directed.

Complete removal of existing treatment of wall surface/new plastered surfaces and applying two coat of plastic emulsion paint over a coat of wall care putty complete all as specified and as directed.

Complete removal of existing treatment/new plaseter surface (using removal machine) including preparing surfaces of wall and applying two coats of weather proof exterior emulsion paint (APEX or equivalent) over a two coat of wall care putty with a coat of Primer complete all as specified and as directed.

Supply only for 5.5 mm thick tinted glass pane for glazed fixing for aluminium partition/ Windows complete all as specified and as directed.

Powder coated 15 micron aluminium door of approved design complete all as specified/directed with all fixing arrangement including providing and fixing door handle, tower bolts, mortice lock 6 lever (Make - Harrison/Godrej) one on each door and , aluminium Powder coated tower bolts 200 mm long (03 Nos on each shutters) and wire mesh or particle board or 5mm thick tinted glass pane of gauged shutter along with aluminium glazing beading of size 19.00 mm x 17.5 mm x 0.70 mm @ weight of 0.097 Kgs per RM including rubber gasket on both side complete alongwith neoprene lining. The member shall be made out of extended aluminium section comprising of :- (Size of the door shall be as per site requirement) (a) Door frame of size 95.25 mm x 44.50 mm x 1.70 mm @ 1.301 Kg/RM.. (b) Shutter vertical member 85 x 44.50 x 1.56 mm @ 1.39 Kg per RM. (c) Shutter top member 83.50 x 44.50 x 1.54 mm @ 1.139 Kg per RM. (d) Shutter bottom member 101.60 x 44.50 x 1.60 mm @ 1.301 Kg per RM. (e) Shutter lock rail member 83.50 x 44.50 x 1.54 mm @ 1.139 Kg per RM. The actual measurement shall be taken, wastage shall be included in the rates quoted, the above sections are from JINDAL/INDAL/HINDAICO/WALCO extruion. The contractor is at liberty to choose high section from approved make with minor variation in sizes and weight as approved. However nothing extra shall be paid for over size and over weight section also.

Aluminium powder coated frame with window shutters (glazed ,wire gauge and grill) side hung/three track sliding with aluminium frame or chowkat 1.5 mm thick aluminium powder coated of size 100 mm x 44.5 mm and window shutter frames glazed and wire gauze (middle, top rail, bottom rail) and styles 1.5 mm thick aluminum powder coated of size 44.5mm x 44.5mm including powder coated aluminium grill 50mm x 50mm aparture and all fitting such as rubber gasket, aluminium glazing clips locking cabinet, 4 mm thick tinted glass pane for glazed shutters, stainless steel wire mesh for gauge shutter and hook and eye for each shutter fixed with rubber gasket and glazing clip/aluiminium beads aluminium tower bolt 75 mm 02 Nos each shutter, aluminium butt hinges 75 mm 02 Nos in each shutter aluminium handle 100 mm 01 No in each shutter including all accessories complete all as specified and as directed.

vijay constrction co

SODHI TRADING CORPORATION

paras ram pachiala

V K CONSTRUCTION CO

SINGH CONST CO

R K BUILDERS