Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC BHANDARI NIWAS BHARAT NAGAR TEH DISTT PATHANKOT PIN 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹42.3 L+₹2.8 L (7.18%)Rejected-AOC BALSUA P O JHAKOLARI PATHANKOT PATHANKOT PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹42.8 L+₹3.3 L (8.43%)Rejected-AOC | L3 | Rejected-AOC Rejected |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
3 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N) Mamun
Garrison Engineer(N) Mamun Pin-145001
ANNUAL COMPREHENSIVE MAINTENANCE TO OTM ACCN AT ZONE D-IB UNDER AGE B/R-II OF GE (N) MAMUN
2022_MES_556306_1
GE(N)/M-30/2022-23
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer(N) Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N) Mamun
₹80,000
16 Dec 2022
7 Oct 2022
5 Nov 2022
7 Oct 2022
3 Nov 2022
22 Oct 2022
Amount
Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises all as specified and directed.
M&L for rendering 10mm thick cement plaster on faces of brick work , concrete or fair faces surfaces in cement mortar (1:6) finished even and fair without using extra cement all as specified and directed.
M&L Rendering 15mm thick in two layers (base layer 10mm & finishing layer 5mm thick) in cement mortar (1:4) using liquid water proofing compound in finishing layer on brick work or concrete surfaces of wall, surfaces finished even and smooth without extra cement, etc complete all as specified & directed. (Note : WPC shall be measured and paid separately)
M&L for 5mm thick cement plaster in CM 1:3 on concrete surface of ceiling, chajja etc finishing the surfaces even and smooth without using extra cement etc complete all as specified and directed.
M&L for two coats of white wash on newly plastered surface of ceiling including preparation of surfaces all as specified and directed.
M&L for preparing newly plastered surfaces and applying two coats of cement base paint over one coat of chalk whitening on wall etc complete all as specified and directed.
M&L for two coats of oil bound distemper over a coat of chalk whitening on newly plastered surface of walls including preparation of surfaces etc complete all as specified and directed.
Taking down chowkhats of frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.
All as per Srl Item No 8 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each etc complete all as specified and directed.
S&F Sheet glass, 5.5mm thick ordinary quality and glazing in square exc 0.5 sq. m in each pane etc complete all as specified and directed.
M&L for Pressed steel frames 125mmx60mm for door, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) tarring ends incl 02 coats of synthetic enamel paint over a coat of red oxide primer on exposed surface, etc complete all as specified and directed.
All as per item 12 but frames size 105mmx60mm
M&L for PCC (1:3:6) type C-1 using 12.5 mm graded crushed stone aggregate as in back filling of chowkhat all as specified and directed .
S&F 2nd class factory made hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc (divided into squares with plain chamfered or rounded , mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified & directed.
S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated all as specified.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing etc complete all as specified and directed.
S & F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed etc complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed etc complete all as specified and directed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified & directed..
S&F mild steel barrel tower bolts stove enameled black with bright bolts of length 150mm all as spd ISI Marked etc complete all as specified and directed.
S&F continuos (piano) hinges, mild steel, bright finish or elcetrogalvanised size of flap 30 mm etc complete all as specified and directed.
S&F 100mm hasp and staples, safety type of alum anodised complete complete all as specified & directed.
S&F mild steel pressed handle oval type stove enameled black of size 150mm complete all as specified & directed.
S&F Mild steel sliding door bolts (ISI Marked) 250mm long, stove enameled black, with bright bolt not less than 12mm dia with & incl a minimum of 6 bolts & nuts, four on sliding and two on staple plate complete all as specified & directed.
S&F 150 mm MS helical door spring for door closer,complete all as specified and directed.
M&L for Preparation of new or previously untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all complete all as specified & directed.
M & L preparation of wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed.
M&L for Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed ot welded incl 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to F I frame work , incl other fittings ,hinges ,handles tarred hold fasts PCC blocks. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified & directed.
M&L for Providing and fixing Eco 3000 Series Windows fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/Sq. Mtr.) with total coated thickness of 0.60 mm. Paint Specifications: Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Dimensions of Sections: Section for frame should be 48mm x 50mm, Section for Mullion should be of 48mm x 50mm, Section for Glazed Shutter Frame should be of 47mm x 20mm, and Section for Fixed Glass Bead should be of 12mm x 12mm.Fixing Details: Frame and Shutter Frame Sections should be cut to length and metre joined with Polypropylene Corner Brackets. Mullion Section should be joined with Frame/Mullion using Nylon Mullion Cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in Note: Coated rate including all glass and wire mesh
M & L for Eco 4000 Series Windows fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/Sq. Mtr.) with total coated thickness of 0.60 mm. Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Section for frame should be 48mm x 50mm, Section for Mullion should be of 48mm x 50mm, Section for Glazed Shutter Frame should be of 47mm x 20mm, and Section for Fixed Glass Bead should be of 12mm x 12mm. Frame and Shutter Frame Sections should be cut to length and metre joined with Polypropylene Corner Brackets. Mullion Section should be joined with Frame/Mullion using Nylon Mullion Cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter. Each Glazed Shutter should be provided with S.S. Pivot Hinges-1set, Seccolor Handle & Seccolor Stay. Window Frame should be fixed to brick/concrete masonry by using Nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frames. :Glass shutter & Fixed Glass portions should be provided with a glass of 5 MM Plain Float Glass. Windows should be provided with Grill made of 10mm sq. MS Bars welded to at 150mm center-to-center, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws Mesh Shutter should be provided with a Stainless Steel 32 gauge Fly mesh of 304 grades with 144 holes per square Inch. Note: Coated rate including all glass and wire mesh
M&L for hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads etc complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each paneetc complete all as specified and directed.
S & F figured glass pin head type 3 mm thick ordinary quality and glazing with oil putty n.exc 0.5 Sqm in each pane etc complete all as specified and directed.
S&F in repair Stainless steel wire cloth 0.34mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanized wire staple, etc complete all as specified and directed.
Dismantling floor, hearth or wall tilling and terrazo topping incl cement mortar bedding ( but not backing) removing serviceable tiles to stores and rubish off the premises complete all as specified & directed.
M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plaster in CM 1:4 complete all as specified and directed .
M&L for vitrified tiles 8-10 mm thick ( Square or rectangular) polished, double charged area of each tile not exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:6) all as spd and directed .
M&L for vitrified tiles 8-10 mm thick ( Square or rectangular) polished,double charged area of each tile not exceeding 0.36 sqm in daddo, skirting and like that set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 10mm thick screed bed in CM (1:4) all as spd and directed .
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:6) complete all as specified & directed.
Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia complete all as specified & directed.
Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia complete all as specified & directed.
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.
Fixing only the 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces to walls, floor, ceiling etc all as specified.
S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified & directed.
S&F for Fixing only the 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces to walls, floor, ceiling complete all as specified & directed.
S&F for Ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 20mm bore iron pipe and fixed (minimum weight 20mm -210 gms) fixed in reapirs complete all as specified and directed.
S&F in repair Bib taps cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore etc complete all as specified and directed.
S&F in repair angle valve / stop valve cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore etc complete all as specified and directed.
S&F in repair concealed type angle valve / stop valve cast copper chromium plated fancy type alloy with long shank and cup ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore etc complete all as specified and directed.
S&F in repair 20mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed complete all as specified and directed
S & F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia waste pipe complete all as specified & directed.
S & F in repair pillar tap 15 mm bore chromium plated screwed down, high pressure screwed for iron pipe complete all specified and directed .
S & F in repair PVC waste pipe 32 mm dia minimum 600 mm long for wash hand basin and urinal etc complete all as specified and directed.
S & F in repair PVC connection 15 mm size with PTMT nuts or length 450 mm etc complete all as specified and directed.
S&F in repair grating 100 mm dia of PTMT (Minimium weight 25gms)complete all as specified & directed.
S&F PVC flushing cistern 10 Ltr capacity, valve-less syphonic action type, low level, complete with inlet, ball valve, handle, including brackets/pins, PVC flush pipe 32mm bore and PVC connection 15mm bore 450mm long fixed in repair including taking out existing high/low cistern, etc complete all as specified and directed.
S&F for Vitreous china wash down water closet pan pedestal pattern , white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe incl plastec seat and cover ( As directed ) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) etc complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protection laid in panels and joints filled with mix of bitumen and sand (1:3) by weight, finished the surface even and smooth using extra cement including demolition of damaged plinth protection and removal of debris out off the premises etc complete all as specified and directed.
M&L Marble work 12mm to 15mm thick (table rubbed and polished) in cooking plateform, window cill, steps etc in cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green/ Black Marble Bhaislana Zebra etc complete all as specified and directed
S&F Rotational moulded polyethylene water storage tanks three layer of capacity 500 litre, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm ball valve high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball etc complete including taking out existing water tanks of any description complete all as specified & directed.
S&F Rotational moulded polyethylene water storage tanks three layer of capacity 1000 litre, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm ball valve high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball etc complete including taking out existing water tanks of any description complete all as specified & directed.
M&L Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres including all accessories, complete all as specified & directed.
M&L Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres including all accessories complete all as specified & directed.
S & F 20mm bore Ball brass valves, high pressure with polythene float and flynut complete, screwed down for iron pipe fixed complete all as specified & directed.
S&F in repair 20mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore etc complete all as specified and directed
Supply only liquid water proofing compound.
M&L PCC 1:2:4 type B-0 padding as roof , surface finished even and smooth without using extra cement etc complete all as specified and directed
M & L for cement concrete (1:2:4) type " B1 " ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work. ( Item also applied in broken RCC chajjas and roof projection )
M & L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement (WPC measured separetaly)
APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.
APP modified roof treatment over existing accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.6mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane, Physical property of membrane shall be as under :- (i) Membrane weight not less than 3.60 Kg/Sqm. (ii) Non woven polyester weight not less than 160 gsm/Sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650/Sqcm and transverse not less than 450/sqcm at 230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N. (vi) Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 Kg/Sqcm. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.
S&F Cast iron waste and vent pipes sand cast 100mm dia bore in any length with or without ears with cement joints fixed to walls with all fittings includign taking down the unservicable pipe with fitting complete all as specified & directed.
S&F Cast iron waste and vent pipes sand cast 75mm dia bore in any length with or without ears with cement joints fixed to walls with all fittings includign taking down the unservicable pipe with fitting complete all as specified & directed.
M&L for CI branch piece single of 100mm bore or with parallel branches fixed in repair complete all as specified & directed.
M&L for CI branch pipece single of 75mm bore or with parallel branches fixed in repair complete all as specified & directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
Mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.
M&L for reinforced cement concrete 1:2:4 type B-0 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed.
M&L Granite ( including demolition of old stone/ tiles) work 15mm thick (table rubbed and polished) in steps, jambs, pillars, steps, window cills,cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of granite etc complete all as specified and directed
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers , PVC waste pipe fixed in repair including waste copling ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.
M&L for taking down shutter of any description exceeding 1 sqm and not exceeding 2 sqm each including builders hardware etc, complete all as specified and directed
M&L 18/19 mm thick block Board, grade 2 quality interior grade, commercial type with outer edge locked with Wooden fillets of 2 nd class hard wood, fixed with screws to timber frame work complete all as specified and directed
S&F in repair vitreous china, squatting from Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including provision of lean concrete bedding connection to drain out pipe and to flush pipe and to flush pipe anti syphonage pipe etc complete including making good to floor where required complete all as specified and directed.
S & F Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats ( min wt 190 gms) complete all as specified and directed
M&L 2nd class hard ( wood wrought all sides )Small fittings such as brackets of any type ( wood wrought all sides) ,latch and hinge blocks, shaped door and window stops and the like incl all necessary labours articles n exc 200 Cu.cm each complete all as specified and directed
S&F in repair towel rail CP 600 mm long complete all as specified and directed.
S & F swivel shower of PTMT any colour for fixing with 15mm pipe ( Minimum weight 40 gms) (fixed in repairs) complete all as specified & directed.
S&F in repair grating 100 mm dia of PTMT (Minimium weight 25gms)complete all as specified & directed.
S & F PVC shelf of PTMT fixed with and incl chromium plated brass screws and wooden and plastic cleats ( min wt 300 gms) complete all as specified and directed
S&F in repair over head shower 125mm size for 15mm bore pipe, cast copper alloy chromium plated fixed in repairs complete all as specified and directed
S&F in repair stainless steel kitchen plate rack of size 750 x 900 mm of approved make fixed with mild steel screw complete all as specified and directed
Dismantling brick tile or terracing tiles single layer on roof complete all as specified & directed.
M & L for brick tiles laid on cement mortar in CM 1:4 and joints grouted and flush pointed in CM(1:3) and mixed with 5 % of crude oil by wt. of cement complete all as specified and directed
M & L for brick tiles laid on cement mortar in CM 1:4 and joints grouted and flush pointed in CM(1:3) and mixed with 5 % of crude oil by wt. of cement but except brick tiles complete all as specified and directed
Taking down eaves gutters and rainwater pipes 100 mm dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc including cleaning or refixing or removal to store complete all as specified and directed
S&F PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls complete all as specified and directed
S&F PVC (SWR) bend any radius 110mm dia bore complete all as specified and directed
Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed
S&F Pre- painted galvatume aluminum zinc coating( zinc coating 275) GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.
S&F Plain, Pre-painted galvalume aluminum zinc coating( zinc coating 275) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.
S&F False ceiling of 7 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm of manufacturer M/s Saint Gobain or equivalent of Armstong/Everest including taking down existing ceiling board & grid work etc of any type/pattern complete.
S & F in repair Curtain rails of 20mm bore ,anodised aluminium alloy with bracket ,end bulbs, fancy type, fixed in position as approved by GE.
M&L for18-20mm thick machine cut kota stone slab flooring of size not less than 550x550mm set and jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 20mm thick screed bed in CM 1:4 (surface finished even and rough to receive kota stone) including rubbing and polishing, etc complete all as specified and directed.
M&L for 18-20mm thick machine cut kota stone in dado,riser,skirting to match in size and pattern with kota stone flooring, set and jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 10mm thick backing coat in cement mortar 1:3 (surface finished even and rough to receive kota stone) including rubbing and polishing etc complete all as specified and directed.
M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified & directed.
M&L Cement concrete type D-2,1:4:8(40mm graded aggregate) as in subbase, rough surface complete all as specified & directed.
M&L providing cement concrete Type B-1 (1:2:4), 20 mm graded aggregate as in in coping, benching etc complete all as specified & directed.
M&L Machine pressed precast concrete pre-laminated coloured interlocking paver block any shape and conforming IS 15658-2006 of 60mm thickness M-35 grade complete all as specified & directed.
Dismantling boarding, any description, fixed in any position complete all as specified & directed.
S&F vitreous China ware one piece counter type wash hand basin of size 660 x 390mm incl 32 mm dia CP waste coupling and PVC waste pipe and MS steel brackets fixing with pre polished granite slab 20mm thick of size(1000x600mm) complete all as specified & directed.
S&F 15mm bore sensor pillar faucet (AC-DC) regular spout with flange, fancy type, screwed down high pressure with or without letters hot or cold with long shank screwed for iron pipe ISI marked complete all as specified & directed.
S&F Vitreous china wash down wall hung one piece water closet pan (pedestal pattern), white, complete including fixing to trap, PVC seat cover for pedestal pan complete all as specified and as directed. Make Somany Cat No 120555/Hindware or equivalent make as per list of make attached.
S&F white hand dryer machine technologies complete including necessary accessories and fixing arrangement make as per list of make attached.
S&F in repair urinal sensor with DC battery operated of approved quality complete all as specified and directed.
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for rebates, joining cleat for fixing etc complete all as specified and directed.
S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminum snap beading screws complete all as specified and directed.
S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium aluminium snap beading, screws complete all as specified and directed.
S&F powder coated aluminium grill aperture n exc 50mm x50mm and size of wire 8-10 mm fixing to aluminium frame with zinc coating screws etc complete all as specified and directed.
Deduct Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs. 91,375.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum)
GANDOTRA CONSTRUCTION CO
Alishan Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .