REPAIR OF APPROACH PATH, DRAIN, CULVERT, COMPOUND WALL, GATE, JAFRI WALL AND REPAIR REPLACEMENT CLEANING OF SEWAGE LINE AND SEPTIC TANK UNDER AGE BR II OF GE EAST JABALPUR

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

M&L for brick work with old size flyash bricks, straight or curved on plan exceeding 6m mean radius, built in 1:4 cement mortar complete all as specified and directed.

M&L for brick work with old size flyash bricks, straight or curved on plan exceeding 6m mean radius, built in 1:6 cement mortar complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying three coat of white wash on prepared brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coat of cement based paint over a coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Cement Concrete 1:4:8 type D-2, using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658 - 2006 of 100 mm thickness M-50 Grade with grey cement & no pigment complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering & consolidation complete all as specified and directed.

Demolition of Cement Concrete (reinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M&L for form work to faces of walls, retaining walls, abutments, parapets & staircase railings & similar work including attached pillasters, buttresses, etc, vertical or to batter, fair finished flat surfaces of concrete complete all as specified and directed.

M&L for Reinforced Cement Concrete M-25 (Design Mix) (20 mm graded aggregates) in walls, retaining walls, basement walls, ballast walls & the like, any thickness; above top of footings; including attached pillasters & buttresses complete all as specified and directed.

S&F of Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F of Mild steel TMT bars 6 mm dia & over upto & including 10 mm dia in stirrups, spacers & binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Hardcore of broken stone or boulders of gauge not exc. 63 mm, deposited, spread & levelled in layers not exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for Cement Concrete 1:2:4 type B-1, using 20 mm graded stone aggregate as in path/ hard standing surface finished even and fair complete all as specified and directed.

M&L for forming construction joint 90 mm deep x 10 mm wide filled with grade 'A' sealing compound complete all as specified and directed.

M&L for Heavy Duty Vitrified Ceramic tiles 10 mm thick (Square/Rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for coloured rubber moulded chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over & including 20 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed.

Excavation in trenches in soft/loose soil, n.exc 1.5 metre wide & not exceeding 1.5 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, et. n.exc 10 sqm on plan & getting out complete all as specified and directed.

M&L for removing surplus excavated material (soil) to a distance exc 250 metre but n.exc 500 metre & depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and directed.

M&L for providing Cement Concrete 1:2:4 type B-1, using 20 mm graded crushed stone aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic & other similar bands, plinth courses, string courses, lacing courses, parapets & railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs & the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L for returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

M&L for removing surplus excavated material (soil) to a distance n.exc 50 metre & depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and directed.

M&L for rendering 15 mm thick in one layer in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) mixed with liquid water proofing compound (water proofing compound to be measured & paid separately as supply only complete all as specified and directed.

Supply only liquid water proofing compound ISI marked complete all as specified and directed.

M&L for Cement Concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in surface channels & drains complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Add or Deduct for each 25 mm girth or part thereof over or under 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for providing Precast Cement Concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate in landings, cover slabs (for manholes etc), chullah hoods, chajjas, water troughs, mangers, shelves & similar articles with plain faces including necessary chamfers, weatherings, throating etc & setting in CM 1:6 including necessary formwork if required complete all as specified and directed.

M&L for demolition and breaking up 150 mm internal dia drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortor complete all as specified and directed.

M&L for demolition and breaking up 200 mm internal dia drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortor complete all as specified and directed.

Demolition & breaking up of 300 mm Internal dia, drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition & breaking up of 450 mm Internal dia, drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for reinforced Cement Concrete Pipes, Class NP-2, 300 mm bore laid & jointed complete with collars complete all as specified and directed.

M&L for reinforced Cement Concrete Pipes, Class NP-2, 450 mm bore laid & jointed complete with collars complete all as specified and directed.

M&L for Cement Concrete bed 1:3:6 type C-2, using 40 mm graded crushed stone aggregate to 150 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for Cement Concrete bed 1:3:6 type C-2, using 40 mm graded crushed stone aggregate to 200 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for Cement Concrete bed 1:3:6 type C-2, using 40 mm graded crushed stone aggregate to 300 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for Cement Concrete bed 1:3:6 type C-2, using 40 mm graded crushed stone aggregate to 450 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Fe 410-W (Gde-E-250) quality - A, Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described & applying two coat of synthetic enamel paint (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified and directed.

Dismantling posts or sturts (wood, steel or R.C.C) any section embedded in concrete, brickwork, masonry, etc, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.50 cum in soft/loose soil, getting out, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering & removing surplus soil to a distance n.exc 50 m & making good surface complete all as specified and directed.

M&L for Cement Concrete 1:3:6 type C-2, using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for Providing Reinforced Cement Concrete 1:2:4 type B-1, using 20 mm graded crushed stone aggregate) in precast posts, fencing post, straining or terminal posts, struts etc for fencing average sectional area n.exc 100 sqcm, with or without chamfered angles & flat, splayed, rounded or mitred tops as directed & fixed including necessary formwork if required complete all as specified and directed.

S&F of mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) quality-A or Fe-290 (Gde-E-165) complete all as specified and directed.

S&F of Hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repair, Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, as directed (each line wire to be measured) complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, n.exc 10 cm in width or girth when unconnected with other painting or when painted in a different tint & apply two coat of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified and directed complete all as specified and directed.

S&F of Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm & n.exc 15 cm, diameter of neck 11 to 15 mm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including provision of binding wire complete all as specified and directed.

Supply only Chain link MS galvanised fencing any size or type complete all as specified and directed.

M&L for providing precast cement concrete louvres and jallies, 35 mm thick (measured solid), Type B-0, 1:2:4 using 12.5 mm graded crushed stone aggregate including all mouldings but excluding frame, set in CM 1:6 including necessary formwork if required complete all as specified and directed.

S&F of Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F of Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F in repair, Steel Concertina Coil (Razor cut) of super profile of 600 mm dia stress in position hot dipped Galvanised steel wire coated with CLR anti corrosive paint making diamond shape with the help of dove tail clip (18 SWG) the coil fixed with razor wire at points were coil touch the bottom layer wire with help of hog rings (14 SWG) with and including all fittings like fastener, clips, luggs rings etc as approved by Engr-in Charge complete all as specified and directed.

M&L for 150 mm internal diameter Salt glazed stoneware (SGSW) drain pipes laid in trenches and jointed in CM 1:1 complete all as specified and directed.

M&L for 200 mm internal diameter Salt glazed stoneware (SGSW) drain pipes laid in trenches and jointed in CM 1:1 complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 200 mm internal dia of pipe complete all as specified and directed.

M&L in repair salt glazed stone ware gully traps size 150 x 150 mm, square or round mouthed, type ‘P’ including setting and jointing to drains with CM 1:1 including demolition of existing traps complete all as specified and directed.

M&L for removing of sludge from septic tanks including removal of sludge water manually or mechanically in all respect and removing the sludge to a distance exc 250 metre but n.exc 500 metre and burried in to the ground and making to a true surface and covering with loose soil complete all as specified and directed. Note - The rate for excavation and return filling shall be deemed included in quoted rate.

M&L for cleaning of sewage line (length from manhole to manholes) of any dia by roding and flushing after cleaning and removing mud/sludge etc to a distance exc 250 metre but n.exc 500 metre and spreading in low laying areas and covering with loose soil complete all as specified and directed.

M&L for cleaning of manholes and removing mud/sludge from manholes of any size and depth and removing mud/sludge etc to a distance exc 250 metre but n.exc 500 metre, deposing the sludge and spreading in low laying areas and covering with loose soil complete all as specified and directed.

M&L for cleaning the blockage of floor trap, nahani trap, gully trap and first manhole and removing sludge to a distance exc 250 metre but n.exc500 metre, deposing the sludge and spreading in low laying areas and covering with loose soil complete all as specified and directed.

M&L for dewatering of soak well by diesel driven pump & motar collecting the liquid in closed sewage tank and removing the same to an isolated place to a distance exc 1.50 Km but n.exc 5 Km & depositing where directed complete all as specified and directed. Note :- All T&P such as diesel, pump, motar, pipe section and delivery and sewage tank arranged by the contractor and the cost of the same shall be deemed included in quoted rate etc.

M&L for cutting all grass, vegetation & wild bushes, surface dressing around the Septic Tank/Soak Well/Manholes to a distance of 2 metre all around and removing excavated material to a distance n.exc 50 metre & depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and directed.

M&L for cleaning and removing shrubs plants from roof, chajja, facia or brick wall complete with roots and providing anti vegitation growth chemical spray at any height and making good in CM 1:4 complete all as specified and directed.

Schedule of credit amount of Rs. 1,16,436.00 to be deducted during AOC.

LAL SINGH & SONS

R R VISHWAKARMA CONSTRUCTION CO

GHANI CONSTRUCTION

M/S RAJ BUILDERS