SPECIAL REPAIRS TO BLDG NO P 03 EME OFFICERS SINGLE LIVING ACCN POULTRY FARM UNDER GE NORTH DELHI CANTT 10

Amount

M&L Taking down cement plaster of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water , rendering 10mm thick in cement mortar 1:6,mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shell be measured and paid seperatly

M&L Taking down cement plaster of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water,and rendering 15 mm th in cm (1:4) in ,mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and directed. Note : PD proof 101 LW(+) and super latex 302 shell be measured and paid seperatly

M&L Taking down cement plaster of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water 15 mm thick cement plastering over brick wall in CM 1:4 on fair faces finished even and smooth without using extra cement , using liquid water proofing compound,complete all as specified ( WPC will bemeasured and paid seperatly)

M&L taking down cement plaster of any description from brick, stone walls or concrete surfaces, Rendering 10mm thick CM (1:3) on fair faces of brick work or concrete surfaces as in ceiling/chajja/RCC surfaces complete all as specified and directed.

Supply only PD proof 101 LW (+) of Dr Fixit or eqe.

Supply only super latex 302 of Dr Fixit or eqe.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc omplete all as specified and as directed.

M&L for brick work with sub class 'B' bricks old size bricks strainght or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for half brick thick brick work with sub class B brick using old size brick, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4complete all as specified and directed

M&L prepartion of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer over 3mm thick wall care putty in two or more layer, all as specfied and directed.

M&L for prepration of old surfaces by Complete removal of existing treatment & levelling of wall surface using mechanical / electrical operated sanding / scraping machine within-built vaccum suction system to suck the existing treatment as retrieved by scrapping / sanding etc and applying two coats of Oil Bound Distemper over a coat of primmer by using Air-less paint/primer sprayer over 3 mm thick water proofing wall care putty in two or more layer on prepared surface of wall. complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment from surfaces of wall by mechanised sander of Berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible, applying two coats of exterior emulsion paint (Apex) over a coat of priming coat of alkali resistant priming paint and putty complete all as specified and directed.

Material & labour for preparation of Undecorated surface of wall and applying two coats of exterior emulsion paint (Apex) over a coat of primer and putty all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L , Viterified ceramic tiles 10 mm thick square/rectangular light shade texture polished,area of each tiles Not exceeding 0.36 sqm,in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed. complete all as specified and directed.

All as above item no 15 but on vertical surface as in dados/skirting over 15mm thick plaster as backing coat in CM 1:4 complete all as specified and directed.

M&L coloured Glazed ceramic tiles (400x400mm) x6-7 mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match colors of tiles & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles of size 450x300x7mm thick in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified.

M&L in for Granite stone slab of any colors 20 mm thick machine cut , polished, bedded and jointed in neat cement slurry and pointed in white cement with pigment to match colour of granite including screed bed of 15mm thick in cement mortar 1:4 all as directed and specified.

Dismantling cup board shelf, partition, wall panelling or similar items including shutter, insulation boards/slabs/blankets any thickness including cover fillets all as directed

M & L for 18mm Thick one side decorative lamination and other side balancing white sheet consisting of carcass 18mm thick PVC sheet fixed with approved adhesive and self tapping screws all as specified. Make :-Rajshri

M and L for 20mm wide & 1mm thick PVC EDGE BENDING to paste on Edge of PVC Furniture with suitable adhesive. Make : Rajshri

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and all as directed.

All as above item no 23 above but exc 1.5 sqm but n.exc 4sqm each

Taking down shutters exc 1sqm but not exc 2 sqm each and all as directed.

S&F Rolled mild steel (Fe-410-W(Gde-E-250 quality-B)Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete

M & L 30 MM thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER" consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 X 19mm for styles and 15 X 15mm for the top and bottom rails, M.S frame shall have a coat of metal primer of approved make and manufacture . M.S.frame shall be covered with heat moulded PVC ‘C’ channel made from 5mm (±0.25) thick sheet of Density 600 Kg /Cbm manufactured by an ISO- 9001-2015 certified company, of size 30mm thickness, 50mm width to form styles and 5mm (±0.25) thick and 75 mm wide PVC sheet for the top rail, lock rail and bottom rail on either side of the panel An additional 5mm (±0.25) thick PVC strip of 20mm width is to be stuck on the bottom side of the 'c' channel . Panelling of 5mm (±0.25) thick PVC sheet to be fitted inside the M.S frame welded/sealed to the styles and rails with 5mm (±0.25) x 30mm PVC sheet beading on either side and joined togther with solvent cement adhesive etc., 10mm thick ( 5mm (±0.25) x 2nos.) , 20mm wide cross PVC sheet as gap insert for the top rail & bottom rail. Door to be fixed to frames with 3 nos. M.S powder coated butt hinges of size 100mm*25MM*2mm using 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws, Complete as per direction of Engineer-in-Charge. Make : Rajshri

M&L for Factory made PVC Door Frame (Single Rebate) made out of sigle piece extruded solid PVC foam profile with homogenous fine structure having smooth outer integral skin having 62mm width & 32mm thickness of Density 600kg/Cbm manufactured by an ISO-9001-2015 certified company, frame will be mitred & jointed with self driven self tapping screws of size 50mm x 8mm solvent cement or fusion Heat Welding Process all as per manufacturer's specifications and direction of Engineer-in-charge. Make :- Rajshri

S&F 2nd class Hard wood Factory made Plain framed, Skelton door shutter (gauzed shutter) 35mm thick (two panel or more panel) with panels of timber flat on both side rebated molded bead and planted round the panels on both faces, diveded into squares,, with pail chemfered or rounded, , mitreed sash bars , as per approved design. rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed.

S&F 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed.

Taking down shutters exc 1sqm but not exc 2 sqm each and refixing in same opening comlete all as specified and all as directed.

S&F 140mm long Floor door stopper of brass body & tongue with hard drawn steel spring.complete all as specified and directed.

S & F aluminium powder coated three track window as per Make: Jindal Series "C" of thickness 1.5mm ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified.

S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight , cold rolled, stainless steel and fixed complete all as specified and directed.

S & F 150 mm size extruded brass handle, fabricated type polished complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 200mm long extruded section all as specified.

S&F 250mm long aluminium alloy anodised sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete.

S&F in repairs drapery curtain rods Mild steel powder coated polished 25 mm dia incl brackets, side stop complete all as specified and directed.

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down 20mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed.

S&F of 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls complete all as specified and directed.

Dismantling water tanks and removing to store of capacity exc 500 & n exc 1000 litrs complete all as specified and directed.

Rotational moulded polyethylene water storage white colour three layer tanks 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position with PP-R Ball valve (brass insert) as per requirement or the site all as specified in SSR Part I complete all as specified and directed.

S & F in repair vitreous china wash hand basin white flat back of size 550x400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe, 32mm dia, brass chromium plated waste fittings, PVC connecting pipe and CP pillar tap etc complete all as directed and spcified.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) white colour closed pattern floor mounted with in built P trap including connectio to trap and to flushing pipe including soft closing white seat cover all as specified and directed.

S&F PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed.

S & F in repair fancy type chromium plated long body bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified Make : Hindware.or equivalent

S & F in repair angular stop cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.

S& F in repair 15 mm dia Central hole basin Brass CP mixer formixing hot & cold water screwed down for iron pipe and fixed.

S&F in repairs 15 mm wall mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F in repairs two way angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions.

S&F in repairs 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers complete all as specified and directed.

S&F in repairs CP hygienic spray (health facucet with 1.5M long tube) complete all as specified.

S&F in repairs 15 mm bore shower Rose chromium plated ABS material of size 100x100mm square brass with 'L' bend and PVC washers complete all as specified and directed.

S&F in repairs brass CP towel Rail 20mm dia, D type, 60cm long between flanges etc, complete all as specified.

S&F in repairs of Sheet glass shelf assembly conisting of 5mm thick sheet glass shelf 12cm wide with Chromium plated bracket guard and railing 60cm long complete all as specified.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S & F CP grating 100 mm dia complete all as specified and directed.

S&F steel powder coated coat hook set of 6 pegs complete all as specified and directed.

S&F cp brass toilet paper holder complete all as specified and directed.

S&F for Corner glass shelf with bracket 200mm radius. (Make Jaquar/Parryware or eqv) complete all as specified and directed.

S&F 100mm cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified.

Dismantling and breaking up old cast iron drain pipes of 75/100/mm dia jointed in cement mortar and taking out of trenches and removing materials from site of work complete all as specified.

S&F 75mm bore cast iron soil, waste and vent spun pipes, in any length with or without ears, with cement joints, fixed to walls, complete all as specified.

S&F 100mm bore cast iron soil, waste and vent spun pipes, in any length with or without ears, with cement joints, fixed to walls, complete all as specified.

S&F 110mm bore PVC(SWR) pipe single socketed, in any length fixed to wall with rubber ring joint, ISI marked complete all as specified.

S&F 75mm bore (any radious) cast iron bends diminishing pieces or tapers (larger bore measured) complete all as specified.

S&F 75mm bore (any radious) cast iron bends diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified.

S&F100mm bore (any radious) cast iron bends diminishing pieces or tapers (larger bore measured) complete all as specified.

S&F100mm bore (any radious) cast iron bends diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified.

S&F 110mm bore (any radious) PVC (SWR) bend, ISI marked complete all as specified.

S&F 75mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 75mm cast iron branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S&F 100mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 100mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S&F stack clamps for 75mm bore pipeout of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F stack clamps for 100mm bore pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided for including cutting of reinforcement with mechanical cutter in such a way balance structure should not damage all as specified and directed

M&L RCC type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in chajjas/ shelves etc complete all as specified and as directed.

Formwork to chullah hoods, chajjas, troughs, curved and similar items including edges complete all as specified and directed.

M&L mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip). complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories). complete all as specified and directed.

Demolition of Un-reinforced cement concrete of any description & in any position not otherwise specifically.

M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M & L PCC type D-1, 1:4:8 ( 20mm graded crushed stone aggregate) in foundation filling,sub base of floor,mass concrete complete all as specified and directed.

M & L PCC type B-2 1:2:4 ( 20mm graded stone aggt) in foundation filling, sub base of floor, mass concrete complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete including screed bed of 15mm thick in cement mortar 1:4 all as directed and specified

Dismantaling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) (Fe-410-W(Gde-E-250 quality-B), round or square pipes including distance pieces etc.all as specified and directed.

S&F steel work in tubler trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 all as specified and direced.

S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge.

Material and labour preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Applying two coats of Synthetic paint over a coat of pink primmer on new wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of surface all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Constructional, along the wall or as directed using ATT chemical (20% EC emulsion )@ 2.25 litres per linear metre including drilling and plugging holes etc all as specified and directed.

M&L for removal of existing roof treatment complete and preparation/roughning of the plastered/unplastered roof surfaces incl removal of grass, small trees and fixing the APP polymeric water proofing membarance of minimum 3mm thickness & weighing not less than 3.6kg/sqm of Make : ' Sikka or equvalent as approved by GE, black finished reinforced with non-woven poleyster matt. with a thermofusible finish laid over compatible bitumen1.2Kg/Sqm over bitumenous primer at the rate of 0.40 kg/sqm, torching overlaps with a propane or a butane gas torch with a overlap of 100 mm at the sides and 150 mm at the ends and sealing applying a consistent coat of bituminous alluminium paint over APP surface all as per manufacturers instructions over and including screed bedding 15mm thick on brick/roof surfaces in cement mortar 1:4, mixed with water proofing compound as per manufactrurs instruction incl all as directed and specified

Removal of plants/trees of girth n exe 30 cm from roof tops/sides, external walls of bldg, chajjas, wall junctions, junctions of rain water/CI soil/waste pipe junctions including taking out the roots entered in wall/slab surfaces and making good the disturbed surfaced using PCC (1:2:4) type B-0 or cement mortar (1:2) including repairing the GI/CI/PVc pipe joints which were damged during cutting/taking out process to match with the existing and finishing the disturbed surfaces to match with existing including necessary scaffolding/staging upto a height of 15.00 m from the ground level complete all as specified as directed. Notes (i) Any CI/AC/PVC pipes or pipe fittings damaged during the process of work shall be replaced by new one without any extra cost to the department. The decision of the GE in this regard shall be final and binding. (ii) The debris including vegetation plant/trees shall be disposed off to a distance exc 0.5 Km and n.exe 1.00 K m all as directed by engineer -in charge. (iiI) For deciding the girth of the plant/tree the height shall be taken at 30 cm above the slab/wall. (iv) The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted shall be deemed to include the same.

Dismantling of concrete by chiselling from RCC roof ceiling exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting providing at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 75 mmx 75 mm (10 gauge welded mesh) & tack welding & provision guniting pressure 2.2 to 2.5 Kg/Sqcm with admixer 1 cement 2 of sand of thickness 25 mm including stripping floating with wooden strippers for proper dimension control necessary form work & scaffolding up to four storey complete surface of guniting to be finished fair with 10mm thick plaster in cement mortar 1:4 with water proofing compound @ 3% by weight of cement and recron 3S as per manufacture instruction cleaning & removing of waste material etc as directed at site (Addl reinforcement if required measured and paid separetly. (Note: 1.Only steel scaffolding is allowed and rate included in above item)

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed.

S&F Stainleless steel handle 75mm fancy type for cub board shutter complete all as specified and directed.

S&F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed complete all as specified and directed .

S&F continuous piano hinges mild steel hinges bright electro galvanised width of tops 40mm (when opened) complete all as specified and directed (Make - Ashish/Elite).

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable using colour coding with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc suitable for up to 8 module and suitable for Anchor/Havells/Legrand, accessories etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point/fan/socket on independent board controlled by one, one way switch 06 Amps.

All as per srl item No 109 here-in-before but one 5 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch.

All as per Serial Item No 109 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 6 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

Supply and fixing modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection complete all as specified & directed.

Supply and fixing modular bell push with indicator, 06 Amps, single pole, one way, 230 volts, complete all as specified & directed.

Supply and fixing modular switch, with indicator, 16 Amps, single pole, one way, 230 volts, one module complete all as specified & directed.

Supply and fixing modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified & directed.

Supply and fixing modular socket outlet 06 Pin, 16 Amps, 02 module with shutter complete all as specified & directed.

Supply and fixing ding dong bell, AC, 230 volts, single pole complete all as specified & directed.

Supply and fixing ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 100 watts, duly ISI marked complete all as specified & directed.

Supply and fixing ceiling rose, 6 Amps, 230 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified & directed.

Supply and fixing lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting including 7W LED bulb, complete all as specified & directed.

Supply and fixing decorative wall mounting, S.S finish fixture with opal PC diffuser suitable for 10/12 watt LED Lamp, lamp holder, including 12 Watts LED bulb of 6500 K of B22 base cap, and all accessories pre-wired including connecting up complete all as specified and directed.

Supply and Fixing surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing on surface and wall mounted LED batten with polycarbonate housing and initigarated electronic drive 20 Watt fixture 4 feet provided for efficient heat dissipation with policorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as specified and directed.

Supply and fixing energy saving security light fitting of 45 watts LED Versatile pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

Supply and fixing of 300mm dia, 900 RPM, exhaust fan of steel metal body, heavy duty with louver shutter, frame, blades complete including taking down of old unserivcable fan and depositing in E/M store yard all as directed.

Supply and fixing Exhaust fan of 250 mm sweep of plastic body, 230 volts, AC, 50 Hz capacity, cutting of hole in wall, making of wooden frame, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed by Engineer-in-charge.

Submain wiring using two single core PVC insulated cables with copper conductor(FRLS) of size 04 sq.mm (nominal area) & drawn into medium grade PVC conduit 25 mm dia with all fittings and accessories fixed concealed including chase cutting in brick/stone masonry walls for fixing conduit and plastering the external surface and matching the same with existing surface including provision of 2.5 sq.mm copper conductor(FRLS) PVC insulated earth wire complete all as specified. Note:- 2 Run of 04sqmm + 1 Run of 2.5 sqmm +1Run of PVC conduit shall be measured as 1 RM.

Submain wiring using two single core PVC insulated cables with copper conductor(FRLS) of size 06 sq.mm (nominal area) & drawn into medium grade PVC conduit 25 mm dia with all fittings and accessories fixed concealed including chase cutting in brick/stone masonry walls for fixing conduit and plastering the external surface and matching the same with existing surface including provision of 04 sq.mm copper conductor(FRLS) PVC insulated earth wire complete all as specified. Note:- 2 Run of 06sqmm + 1 Run of 04 sqmm +1Run of PVC conduit shall be measured as 1 RM.

Submain wiring using two single core PVC insulated cables with copper conductor(FRLS) of size 10 sq.mm (nominal area) & drawn into medium grade PVC conduit 25 mm dia with all fittings and accessories fixed concealed including chase cutting in brick/stone masonry walls for fixing conduit and plastering the external surface and matching the same with existing surface including provision of 06 sq.mm copper conductor(FRLS) PVC insulated earth wire complete all as specified. Note:- 2 Run of 10sqmm + 1 Run of 06 sqmm +1Run of PVC conduit shall be measured as 1 RM.

Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 230 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 230 volts, 08 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed.

Supply and fixing sheet metal enclosure double door triple pole and neutral (VTPN), AC, 440 volts, 04 ways with 200 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed and comprising of the following:- (a) MCCB, 125 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 230 volts of 06 to 32 Amps, "C" curve, 10 KA breaking capacity - 12 Nos.

Supply and fixing MCB, SP, AC, 230 volts of 06 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fixing MCB, SPN, AC, 230 volts of 63 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:6 on fair unfair faces of brick wk on concrete surfaces complete all as specified and directed.

The new hut furnitures

Salaria Builders

SHREE RAM BUILD TECH

Kunal Construction Co.

QUALITY CONSTRUCTIONS CO

V M CONSTRUCTION

GIAN ENGINEERS

RISHU CONSTRUCTION COMPANY

SHIV INFRA

garnet engineers contractors

imran construction company

CAPITAL NIRMAN CO INDIA

S.K. ENTERPRISES