Repair Renovation of Primary Health Centre at Chibba

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer.

Wall Painting with plastic emulsion paint of approved lj brand and manufacture to give an even shade. Two or more coats on new work

Finishing Wall with Nerolac surksha Plus Exterior Point to give on even shade Two or more coats.

Dismantling of old plaster or skirting, raking out joints and clearing the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Labour engaged for Demolishing/Dismantaling angular follet (gola) incl. disposal of rabbish to the dumping gred within 50mtr lead and cleaning the roof surface.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade Old steel work (one or more coats)

Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope, relaying plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 ( 1 cement : 3 fine sand ) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead.

Raking out joints in lime or cement mortar and preparing the surface for repainting or replastering including disposal of rubbish to the dumping ground within 50 metres lead.

Flush pointing with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska: With F.P.S. brick tiles

Making khurras 45x45 em with average minimum thickness of 5 em cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing gala 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design : In 75x75 mm deep chase

Painting of flower and logos around the Windows & Doors. Proper branding as per Health and Wellness Centres Drawings.

Renewing glass panes, with wooden fillets wherever necessary : Glass panes weighing 10 kg I sqm

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area beyond 3 sq. metres.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area of 3 sq. metres and below

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood (30mm thick)

Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze .of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows: 9.23.1 lSI marked M.S. pressed but hinges bright finished butt hinges of required size with necessary screws Second class deodar wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 1 Okg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood. (30mm thick)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked.

Disposal of Dismantled Mulba/Unservisable Material from Dumping ground by way of engaging trolly.

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Supplying of brick tiles for regrading items.

Supplying and stacking of good earth at site carriage compelte job.

Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.

Sand / Stone for an avg. lead of (25.00 Kms lead)

Brick Tiles (Av. Lead 45.00kms)

Bashir Ahmed Parrey

HAMIT ULLAH

SHOKAT ALI

M/S MILKHI RAM CONTRACTOR

Ravinder Nath Sharma

ROMESH CHANDER