Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.4 LAccepted-AOC | 1 | Accepted-AOC low | |
| 2 | 2₹2.4 L+₹3,325 (1.39%)Rejected-AOC | 2 | Rejected-AOC high |
Tender Value
₹2.9 L
EMD Value
₹2,900
Closing Date
25 Apr 2025, 4:00 pmClosed
Executive Officer, Chengam Town Panchayat
Chengam Town Panchayat Office
15th Tied -Providing New Borewell with Syntax Tax at Krishnapuram Ettai Nagar
2025_DTP_548620_1
20-3/2025/A1
Open Tender
Civil Works - Water Works
Works
360 days
CHENGAM
Eligible
2 documents required · 2 mandatory
₹0
₹2,900
17 May 2025
19 Apr 2025
26 Apr 2025
19 Apr 2025
25 Apr 2025
19 Apr 2025
19 Apr 2025 - 24 Apr 2025
Amount
Earthwork excavation and depositing on bank with initial lead of 10m and lift of 2.00m in Hard stiff clay. Stiff Black Cotton soil. Hard red earth, Shales, Murrams and earth mixed with small size boulders etc. as per SS 20 B
Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification
Brick work in CM 1:5 (one cement five sand) 12mm thick over brick work including finishing curing etc. and as directed by departmental officers etc., complete
Plastering with CM 1:5 (one cement and five sand) 12mm thick over brick work including finishing curing etc., and as directed by departmental officers etc., complete
Painting two coats with approved cement paint over one coat of priming over the cement plastered exposed surface etc. complete and as directed by the departmental officers.
Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,
Supply and Delivery of HDPE pipe as per Standard Specification.HDPE PIPES - PE 100 AS PER IS 4984/2016
Lowering HDPE pipes and specials to trench and laying to proper grade and alignment and as directed by the TWAD Officers
Supply and Delivery of Gate value as per Standard Specification.
Conducting Geophysical survey including conveyance of survey instrument and other labour charges
Drilling of Bore well anywherw india in Tamilnadu including transport ation from one place to another with tamilnadu in alluvival soil sedimentary starta of clay and sand stone shall be pebbls moulders etc.,by first taking a polot bore of140mm/150mm dia and then enlarging required dia direct or reverse rotary mud circulation method using clay rings fuel, labour and drilling bentonite and water required for drilling are site (Site will be shown by the TWAD board officer )including construction of mud pit
Supply and delivery of 150mm PVC casing pipe without slotted including cost and conveyance of all materials to site etc.,Complete
Supply and delivery of 200 mm PVC casing pipe with slotted including cost and conveyance of all materials to site etc.,Complete
Labour charges for in inserting 150mm Dia PVC Casing pipes assembles (with slots or without slots)in the drilled hole including jointing the pipes with pipes with PVC couples cement with pastes etc., Complete supply and packing the annular space with pebbles of size and quality as approved by the execution Engineering of TWAD Board
SINGLE PHASE SUBMERSIBLE PUMPSET AS PER IS 8034/2002 WITHOUT PANEL BOARD Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 15x70 wd m1574
SINGLE PHASE PANEL BOARD WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor
Supply and delivery of 2.50 sqmm Copper Cable including cost and conveyance of all materials to site and all labour charges etc.,
Supplying and fixing of 1'' Dia G.I. Service pipe including cost and conveyance of all materials to site and all labour charges etc.,
Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.WD-W0871Upto 5 HP
Supply and delivery of PVC and GI Specials including cost and conveyance of all labour charges etc, complete
50mm MS clamp set WD- M0617
150 mm bore cover
50mm GM Gate valve WD- M0619
50 mm GI flangh set (P No. 83)
50mm Elbow (P No. 83)
25mm GI service pipe (P No. 84)
7/18 copper wire for service connection
63 amps main switch (P No. 196)
Nylan rope (P No. 156)
RAJESHWARI CONTRACTOR (BID ID -1318928)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .