Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.1 Cr
EMD Value
₹3.2 L
Closing Date
8 Oct 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Bangalore Electricity Supply Company Limited
T G Ramakrishna
Construction of Rural sub division office building at Yeluvahalli, Chikkaballapura
BESCOM/2024-25/BD/WORK_INDENT204
BESCOM/2024-25/BD/WORK_INDENT204
Open
Buildings
Two Tender Document System(Two Cover)
BESCOM Corporate Office Civil Section Bengaluru
8 documents required · 8 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The bidders shall upload the work done certificate for having executed One building work of value not less than Rs. 106.00 lakhs and completed satisfactorily as a prime contractor within stipulated time period in the past 5 years (i.e., F/Y 2019-20 to 2023-24). Work done certificate shall be duly signed by the officer not below the rank of Executive Engineer or equivalent.
The bidders shall upload a valid registered KPWD Civil contractor Licence of Class II and above.
The bidders shall achieved turnover for an amount not less than Rs.424.00 lakhs achieved in any two financial years in the past 5 years (i.e. F/Y 2019-20 to 2023-24) (in all classes of civil engineering construction works only). The Turnover certificate along with Balance sheet and P & L statement of past 5 years for the Civil Engineering works only (i.e. F/Y 2019-20 to 2023-24) issued from a Registered Chartered Accountant (Registered Chartered Accountant PIN and UDIN number must be mentioned failing which bid will considered Non-Responsive) should be uploaded.
The bidders shall upload the work done certificate for minimum quantities of work executed in any one year, for following quantities (In a continuous period of 12 months from April to March) in the last 5 years (i.e. F/Y 2019-20 to 2023-24) the certificate shall be issued by the officer not below the rank of Executive Engineer or equivalent. a.PCC/RCC -275.00 Cum b.Burnt brick masonry/Solid block masonry -168.00Cum / 730.00 Sqm c.TMT steel reinforcement- 28.00 Tonnes d.Vitrified / Ceramic / Granite flooring -605.00 Sqm
The bidder/tenderer or his identified Sub contractor should upload required valid electrical licence along with consent / undertaking letter for executing building electrification works and should have executed similar electrical works totalling for Rs.16.00 lakhs in any one year in the last 5 years, (i.e. F/Y 2019-20 to 2023-24) signed by the officer not below the rank of Executive Engineer or equivalent for Electrical works.
The banker certificate pertaining to Liquid Assets for availability of fund requirement for the work not less Rs.63.50 Lakhs issued by Nationalised / Scheduled Bank for the subject work addressed to General Manager (Civil), Corporate office, BESCOM after 31.08.2024 in the enclosed format.
Bidders who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The bidder should calculate and upload available tender capacity as per the formula :Assessed available tender capacity : (AXNX1.5 - B) where, A -Maximum value of civil engineering works executed in any one year during the last five years updated to 2024-25 price level taking into account the completed as well as works in progress.N -Number of years prescribed for completion of the works for which tenders are invited.B -Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next 12 Months.
Bidder shall upload the self-declaration affidavit as per the enclosed format on the stamp paper of value not less than Rs. 500/- duly notarized
All other terms and conditions as per NIT and KW4
₹5,000
₹3.2 L
5 Sept 2024
5 Sept 2024
9 Oct 2024
1 Oct 2024
18 Sept 2024
Construction of Rural sub division office building at Yeluvahalli, Chikkaballapura
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not excee...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size...
Extra for making chequers of approved pattern on 1:2:4 cement concrete floors, steps, landing, pavements etc.
Providing and laying in position Reinforced cement concrete for all Foundation works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Shuttering Work for Isolated Footing
Shuttering Work for Combined Footing
Shuttering Work for Columns Upto Plinth Beam
Shuttering Work for Plinth Beam
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc The granite/trap/basalt crushed graded coarse aggregates and...
Shuttering Work for Wall
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height The g...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height The g...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height The g...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height The g...
Shuttering Work for Columns - Stilt Floor
Shuttering Work for Columns - First Floor
Shuttering Work for Columns - Second Floor
Shuttering Work for Columns- Terrace Floor
Shuttering Work for Roof Beam, Lintel Beam -Stilt Floor
Shuttering Work for Roof Beam, Lintel Beam - First Floor
Shuttering Work for Roof Beam, Lintel Beam - Second Floor
Shuttering Work for Roof Beam, Lintel Beam -Terrace Floor
Shuttering Work for Roof Slab - Stilt Floor
Shuttering Work for Roof Slab - First Floor
Shuttering Work for Roof Slab - Second Floor
Shuttering Work for Roof Slab-Terrace Floor
Shuttering Work for Staircase Stilt Floor
Shuttering Work for Staircase - First Floor
Shuttering Work for Staircase - Second Floor
Shuttering Work for Chajja Stilt Floor
Shuttering Work for Chajja - First Floor
Shuttering Work for Chajja - Second Floor
Shuttering Work for Chajja- Terrace Floor
Supplying, fitting and B32placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, t...
Supplying, fitting and B32placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, t...
Supplying, fitting and B32placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, t...
Supplying, fitting and B32placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, t...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings /...
Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings /...
Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings /...
Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to openings /...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Providing and fixing hand rail of approved size by welding etc to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer M...
FULLY GLAZED PARTITION WITH TOUGHENED GLASS & ALUMINIUM CHANNELS
Providing and fixing full height glass partition with 12mm thick clear toughened glass as per design fitted over aluminium channels bot...
Providing and fixing Single shutter glass door of 12mm thick frosted toughened glass of approved make The door is fixed by using any approved make hardware fitting like patch fitting, pivot floor mach...
Providing, fabricating and fixing of stick type structural glazing using Alluminium Extrusions of 63.5 mm x 58.00 mmx 2.25 mm of 1.73 kgs/ mtr for vertical and Horizontal members and 63.5 mm x 38.1 x ...
Providing, fabricating and fixing of stick type structural glazing using Alluminium Extrusions of 63.5 mm x 58.00 mmx 2.25 mm of 1.73 kgs/ mtr for vertical and Horizontal members and 63.5 mm x 38.1 x ...
Providing, fabricating and fixing of stick type structural glazing using Alluminium Extrusions of 63.5 mm x 58.00 mmx 2.25 mm of 1.73 kgs/ mtr for vertical and Horizontal members and 63.5 mm x 38.1 x ...
Providing and Fixing Baguette Terracotta tile with aluminium support bars and frame work complete as per instructions of engineer in charge
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing an...
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing an...
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing an...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size compris...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size compris...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing supply and fixing SS 304 Aldrop - 200mm x 16mm for door shutters including SS screws cost of materials, labour etc. complete as per specifications of vendor and as per architects details Mak...
Providing supply and fixing Cylindrical Lock-SS-Key less with 5 years warranty suitable for Flush door shutters including cost of materials, labour etc. complete as per specifications of vendor and as...
Providing and fixing bright finished brass handles with screws etc complete:
Brass handles 125 mm with plate 175x32 mm
Providing and fixing bright finished brass handles with screws etc complete:
Brass handles 125 mm with plate 175x32 mm
Providing and fixing bright finished brass handles with screws etc complete:
Brass handles 125 mm with plate 175x32 mm
c) Second Floor
Providing and fixing bright finished brass handles with screws etc complete:
Brass handles 125 mm with plate 175x32 mm
d) Terrace Floor
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc to suit shutter thickness complete
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc to suit shutter thickness complete
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc to suit shutter thickness complete
c) Second Floor
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc to suit shutter thickness complete
d) Terrace Floor
Providing and fixing bright finished brass butt hinges with necessary screws etc complete :
125x85x5.5 mm (heavy type)
Providing and fixing bright finished brass butt hinges with necessary screws etc complete :
125x85x5.5 mm (heavy type)
Providing and fixing bright finished brass butt hinges with necessary screws etc complete :
125x85x5.5 mm (heavy type)
c) Second Floor
Providing and fixing bright finished brass butt hinges with necessary screws etc complete :
125x85x5.5 mm (heavy type)
d) Terrace Floor
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete :
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete :
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete :
c) Second Floor
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete :
d) Terrace Floor
Providing supply and fixing MS Holdfast of size 260mm x 25mm x 5mm thk for fixing door frame to walls including cost of materials, cutting masonry pockets for receiving MS Holdfast, one coat of shop p...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...
Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs,laid to slope compacting, including cost of materials, labour, curi...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs,laid to slope compacting, including cost of materials, labour, curi...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height The granite/trap...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height The granite/trap...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height The granite/trap...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-charge.
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-charge.
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-charge.
Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of...
Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of...
Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) greater than 78, solar reflection greater than 0.70 and initial emittance greater than 0.7...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surf...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surf...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surf...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surf...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...
Providing textured paint of approved quality, colour and shade to wall surface after cleaning and rubbing the wall surface with wire brush of medium size emery stone to remove all the loosely adhering...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting wood work with Deluxe Multi Surface Paint of required shade Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an ev...
Painting wood work with Deluxe Multi Surface Paint of required shade Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an ev...
Painting wood work with Deluxe Multi Surface Paint of required shade Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an ev...
Painting wood work with Deluxe Multi Surface Paint of required shade Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an ev...
Providing and fixing Gypsum false ceiling as per India Gypsum specification for ceiling with drops as per drawing including of providing and fixing G.I Frame work as per specification of India gypsum ...
Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in module size of 600 x 600 x 20mm with Exposed Grid for Hospitals, Shopping malls, Commercial establishments and office complex...
Non Sharing workstation Size : 1200 mmW x 600mm D x 1200 mm ht (Non Sharing-Edgebinding table top): single unit
FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLPB table top , 25 mm thick PLPB with edge bomded End table...
Providing and fixing L-shape table made with prelaminated particle board Table top made with 25mm and understructure made with 18mm board.storage box made with 18mm prelaminated board This is includin...
Providing and fixing conference table consisting of 19 mm double thick Ply table top edge bounded with 6 mm thick CORIAN top finish at top area and at sides with 45mm depth corian finish, 19 mm double...
Supplying Black Medium Back Mesh chair of size 585mm(L)x585mm(W)x1040mm(H) with cushion seat and mesh back with cushion arms and nylon base with Pnuematic height adjustable system with wheel rollers c...
Supplying Liberate High Back Mesh chair of size 660mm(L)x660mm(W)x1250mm(H) with cushion seat and mesh back with cushion arms and chrome plated metal base with Pnuematic height adjustable system with ...
Supplying and placing of 3 Seater sofa of Leatherite finish of size, Length-1200mm, Width-710mm, Height-780 mm, and seating height 410mm, of approved make & color etc. complete as per specifications.
Supplying and placing of 3 Seater sofa of Leatherite finish of size, Length-1800mm, Width-710mm, Height-780 mm, and seating height 410mm, of approved make & color etc. complete as per specifications.
Providing and fixing storage unit made out of 19mm thick Approved commercial ply for shutters, sides, bottom, Compartments and Drawers finished with Acrylic laminate (Approved make and shade) of 2 mm ...
5 BAY MOBILE RACK COMPACTOR Total no.of Racks of size 1980mm H X 1000mm W X 380mm D with 5 compartment-80 Nos,
Capacity of Flat Files considering 25mm thickness-16000 files (OR) Capacity of Box Files ...
BAY MOBILE RACK COMPACTOR Total no.of Racks of size 1980mm H X 1000mm W X 380mm D with 5 compartment-80 Nos,
Capacity of Flat Files considering 25mm thickness-16000 files (OR) Capacity of Box Files co...
5 BAY MOBILE RACK COMPACTOR
Total no.of Racks of size 1980mm H X 1000mm W X 380mm D with 5 compartment-80 Nos,
Capacity of Flat Files considering 25mm thickness-16000 files (OR) Capacity of Box Files ...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and laying in position Reinforced cement concrete for all Foundation works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Shuttering Work for combined Footing
Shuttering Work for retaining wall
Shuttering Work for Slab
Supplying, fitting and B32placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, t...
Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation o...
Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Supplying and fixing of heavy duty SFRC manhole cover with frame 560MM size for underground tank.
Providing and fixing of PVC Rungs footrest in under ground tanks / manhole using M20 concrete bed blocks for masonry walls or during construction for RCC surfaces, including cost of materials, labour,...
UGT/OHT (inside) waterproofing with Anti-microbial Coating Providing and Applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, a...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...
Concrete, Formwork & reinforcement
Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine a...
Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and laying in position Reinforced cement concrete for all Foundation works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Addtionalities for Form Work for Combined Footing @3%
Addtionalities for Form Work for Wall@ 10%
Addtionalities for Form Work for Roof Beam, Lintel Beam @ 60%
Addtionalities for Form Work for Roof Slab @ 50%
Supplying, fitting and B32placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, t...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation o...
Providing and fixing of PVC Rungs footrest in under ground tanks / manhole using M20 concrete bed blocks for masonry walls or during construction for RCC surfaces, including cost of materials, labour,...
Supplying and fixing of heavy duty SFRC manhole cover with frame 560MM size for underground tank.
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and laying in position Reinforced cement concrete for all Foundation works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed...
Addtionalities for Form Work for Isolated Footing @8%
Addtionalities for Form Work for Columns @ 70%
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height The g...
Addtionalities for Form Work for Plinth Beam @ 50%
Addtionalities for Form Work for Columns @ 70%
Supplying, fitting and B32placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, t...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Supplying heavy gauge PVC conduit pipe ……mm dia......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc. and running before concreting the slab...
Supplying heavy gauge PVC conduit pipe ……mm dia......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc. and running before concreting the slab...
Supplying heavy gauge PVC conduit pipe ……mm dia......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc. and running before concreting the slab...
Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc. and fixing using inverted wood plugs in case of RCC ce...
Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc. and fixing using inverted wood plugs in case of RCC ce...
Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc. and fixing using inverted wood plugs in case of RCC ce...
Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc. and fixing using inverted wood plugs in case of RCC ce...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc By groove cutting in the wall and fixing by bracing U or J hooks and cem...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc By groove cutting in the wall and fixing by bracing U or J hooks and cem...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc By groove cutting in the wall and fixing by bracing U or J hooks and cem...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc By groove cutting in the wall and fixing by bracing U or J hooks and cem...
Supplying and fixing PVC/metal conduit deep junction box.
a) 19/20mm deep junction box
Supplying and fixing PVC/metal conduit deep junction box.
b) 25mm deep junction box
Supplying and fixing PVC/metal conduit deep junction box.
c) 32mm deep junction box
Extra for Groove cutting in brick wall/cc floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing the wall upto wall surface complete
a) upto 50mm conduit in CC Floor
Supplying PVC flexible conduit pipe….mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm..using NF ...
Supplying and fixing Metal fan box with round hook
Point wiring using copper wire without switch
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS m...
Point wiring using copper wire without switch
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS m...
Point wiring using copper wire without switch
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS m...
Point wiring using copper wire without switch
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS m...
Point wiring using copper wire without switch
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS m...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Supplying and Drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (virgin) PVC insulation and she...
SWITCHES, SOCKETS & ACCESSORIES
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cu...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc. complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc. complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc. complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc. complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc. complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc. complete on the existing met...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc. complete on the existing met...
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
a) 6 Amps one way
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
b) 6 Amps Two way
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
c) 6Amps 3way socket
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
d) Stepped fan regulator Two modu...
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
e) 32A,DP,Switch
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
f) 16Amps one way switch
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293
g) 6/16Amps universal socket
CONTROL SWITCH GEARS & ACCESSORIES
Supplying push button operated, direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic therm...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts ,nuts etc. with provision for fixing suitable type capacity MCB'S single phase /...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts ,nuts etc. with provision for fixing suitable type capacity MCB'S single phase /...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts ,nuts etc. with provision for fixing suitable type capacity MCB'S single phase /...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts ,nuts etc. with provision for fixing suitable type capacity MCB'S single phase /...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.
a) 40Amps 2 pole
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.
b) 32-40Amps 4 pole
Supplying and fixing angle iron frame work fabricated out of M.S angle iron ….and M.S flat with bolts, washers etc… and painted with 2 coats of red oxide and then two coats of approved paint.
EARTHING AND L.T U.G CABLES
Supplying fixing and wiring earth electrode for grounding of DG Sets etc using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reducer f...
Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required.
Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required.
b) 600x600x3mm GI Plate
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc..
Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and ...
Labour charges for laying of 1.1 KV class UG cable in the existing trench GI pipe / stoneware pipe / on wall / on pole as required.
On wall / Structure.
a) 2.5 sqmm to 25 sqmm
Supplying and fixing of heavy duty cable glands suitable for UG cable of1.1 KV class (metal only)
Aluminium End Terminal (Lug)
a) 2.5 to 10 sq.mm
Supplying and termination of Heavy Duty Copper Terminal long barrel.
a) 25 sq.mm Long barrel
Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.
Fixing all types and all capacities fluorescent /false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23 / 0.00076 " twin twisted PVC insulated wires, requi...
Using 2 Mtr long 19mm 18SWG enamelled braised conduit of two nos rod pendent with ball socket with check nuts all nickel painted.
Extra length of GI pipe of class b 19mm dia for down rod.
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing a 5 amps ceiling rose, necessary...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.
FIRE SAFETY WORKS
Supplying of two buckets standalong with buckets
Supplying of HAND GLOVES
Supplying of first aid box
Supplying of SAFETY MASK
Supplying of FIRST AID CHART with lamination
Supplying and installation of RUBBER MAT 1mtx1mt-10mm Thick
FIRE EXTINGUISHERS - Supply & Providing 4.5Kg C02 Gas Type aluminium body Squeeze grip Fire Extinugisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 11....
LIGHT FIXTURES , FANS
Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications.
Supplying of 2' feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8 Power Input : 220-240V @ 50 Hz & power fac...
Supplying of 2' feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8 Power Input : 220-240V @ 50 Hz & power fac...
Supply of round/square recess/surface mounted rolling type LED Down light with.....W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swi...
Supply of round/square recess/surface mounted rolling type LED Down light with.....W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swi...
Supply of 2'X2' LED recessed / surface luminaire with watts system wattage Housing shall be with pressure die cast aluminum alloy with corrosion proof resistant polyester powder coated Driver operates...
Supplying exhaust fan of 1440RPM heavy duty with bracket blades complete for lighting duty suitable to operate on 230V 50Hz, AC supply. 12" sweep (300mm)
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power inpu...
Supplying of Surface / recess mounting non integrated type LED down light …W luminaire comprising of pressure decast/extruded aluminum housing, with spring loaded false ceiling clamps, LED of Power...
Supply of 2'X2' LED recessed / surface luminaire with watts system wattage Housing shall be with pressure die cast aluminum alloy with corrosion proof resistant polyester powder coated Driver operates...
Fabricating supplying and mounting MS box made out … SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front ...
Supplying and fixing angle iron frame work fabricated out of M.S angle iron… and M S flat …….With bolts, washers etc. and painted with 2 coats of red oxide and then two coats of approved paint
Supplying …….amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator w...
Supplying of multi function Meter digital three line back light LCD type display of voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 ...
Supplying, fixing and wiring 50/5 to 400/4Amps 5VA burden Current Transformer Class 0.5 accuracy with tape wound.
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V AC, 50Hz 12/24V DC
Supplying, fixing and wiring 3 Digit Digital Ammeter/Voltmeter
Supplying of on load change over switches 4 poles, AC-23A
Duty, 415V, 50Hz, AC Supply (Open Execution)
Supply and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete Protection of overload and short circuit with thermal m...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
UPS, BATTERIES.
Supplying, erecting, testing and commissioning of ON-LINE UPS System suitable for operation on 230V Input and 230V, Output, 50Hz, A/C supply with Isolation Transformer all accessories ...
Supplying installation testing and commissioning of 12V DC, AH batteries in poly propylene container for U.P.S sealed maintenance free batteries
100 AH Capacity
CAMERAS & ACCESSORIES
Supply, Installation, Testing & Commissioning of 1/3" progressive scan CMOS, Fixed 4.0 megapixel, IP based Colour camera, Up to 30 m IR range, Color: 0.01Lux, 1000TVL, Digital WD...
Supply, Installation, Testing & Commissioning of 8port 10/100/1000 Smart POE Switch with 4 SFP (192W)for camera connection including all necessary accessories.
Supply, Installation, Testing and Commissioning of NVR (Networkable Video Recorder) 8Channel NVR, Up to 8ch IP cameras input, Up to 5 Megapixels resolution recording, HDMI and VGA output at up to 1920...
Supply, Installation, Testing & Commissioning of HDMI, Display Monitor 32" high resolution, Monitor with all mounting bracket accessories
Supplying and drawing UTP-CAT 6E LAN cable.
NETWORKING AND COMMUNICATION :
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 Su...
Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable.
Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable.
Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable.
Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable RG-6.
Supplying and Fixing of MDF Krone junction box with KRONE module / Telephone cable termination.
Design, supplying, erecting testing and commissioning of - passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without mac...
AIR CONDITION WORKS - Supplying erection, testing, commissioning of cassette type split air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air...
Installation charges of split/cassette type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support up to 4.0 ton split/cassette type A/C.
Supplying and installation of insulated refrigrent copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas ...
Extra for fabrication supply and fixing of stand fabricated using slotted angle/L.angle of size 6mmx50mm for mounting out door/indoor A C unit/Batteries
Providing and fixing wash basin with C.I brackets, 15 mm C.P brass pillar taps, 32 mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wall...
Providing and fixing wash basin with C.I brackets, 15 mm C.P brass pillar taps, 32 mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wall...
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting...
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting...
Providing and fixing CP Health faucet with flexible hose,CP Bibcock with 2 in 1 connectvity, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete...
Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931
Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931
Providing and fixing C.P brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
Providing and fixing C.P brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete...
Supplying , shifting to the place of installation and fixing testing and commissioning of stainless steel soap dish 150 x 150mm including cutting and setting in walls with cement joints and making goo...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making goo...
Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class ( Premium...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P brass flush pipe, spreaders wit...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P brass flush pipe, spreaders wit...
Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.
Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Providing & fixing, testing and commissioning u PVC multi inlet floor trap 75mm dia conforming to IS 13592 with required P C C support placed to required level as per site condition complete..
Supplying and fixing PVC 'P' trap 110mm dia, of self cleansing design with or without vent arm complete including cutting and making good the walls and floors
Providing & Fixing in position heavy duty C P grating 125mm dia, with frame of below mentioned sizes including jointing and fixing material complete
Providing and grouting sleeves made in beam/ slab to draw waste and soil lines at all floor level of the below mentioned sizes , including condcting water ponding test to ensure zero leakage with all ...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
20mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
20mm nominal bore
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing o...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
20mm nominal bore
Providing and fixing Brass full way valve gate with C.I wheel of approved quality (screwed end) :
25mm nominal bore
Providing and fixing Brass full way valve gate with C.I wheel of approved quality (screwed end) :
32mm nominal bore
Providing and fixing Brass full way valve gate with C.I wheel of approved quality (screwed end) :
40mm nominal bore
Providing and fixing Brass full way valve gate with C.I wheel of approved quality (screwed end) :
50mm nominal bore
Providing and placing on terrace, polyethylene water storage tanks As per IS 12701 Marked with cover and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flo...
Supplying & fixing suction Y'/ pot stainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots 50 mm dia
Supplying , fixing, testing and commissioning of PVC welded rain water head / khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC sheet...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments.
110mm dia PVC couplers
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments.
110mm dia PVC couplers
Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 160 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 160mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 160 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Providing And fixing Square mouth stone ware gully trap SP-1 Complete With CI Grating Brick Masonry Chamber 100x100mm Size P trap With Non modular common burnt bricks of designation 3.5, with water ti...
Constructing brick masonry chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I cover with frame (light duty) 455x610 mm internal di...
Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock...
DOMESTIC WATER TRANSFAR PUMP
Supplying, installing, testing and commissioning of submersible / Mono blockelectrical driven pump 1set (1 working & standby) domestic water pumps for pumping domestic wa...
Providing and fixing gun metal non- return valve of approved quality
32 mm nominal bore
Providing and fixing gun metal non- return valve of approved quality
40 mm nominal bore
Construction of brick masonry catch basin chamber chambers of internal clear dimension as mentioned below by using first class table moulded modular bricks 230 mm thick wall in cement mortor joints in...
Construction of percolation well / rain water harvest pit of 2 m dia and 3m deep with precast RCC rings, coveringthe top with RCC slab including supply and fixing 600 x 600 RCC MH cover CI / MS rungs ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW4 Yeluvalli.docx
Tender Document • 0.57 MB
Self declaration format.docx
Others - Self Declaration Format • 0.02 MB
Banker Certificate Format.pdf
Others - Banker Certificate Format • 0.02 MB
NIT Yeluvalli.docx
Instructions to Tenderers • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .