Loading
Loading…
Loading…
Tender Value
₹1.9 Cr
EMD Value
₹3.7 L
Closing Date
5 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TRD
15 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where : V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility criteria :The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar Work :- Execution of any 25KV or 2 x 25 KV OHE Work. (Authority : PCEE/NWR office letter no.NWR-HQ0ELCT(TR)/22/2020 Part-(1) dt.13.02.2023
The contractor should have valid electrical contractor license issued by government. Note: The submitted/ uploaded license must be valid on the date of tender opening to consider as eligible offer.
6 conditions · 3 needing a document upload
The Bid Security shall be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90 days beyond the bid validity period.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Documents to be submitted by tenderers as per status of their firms and are mandatory. These documents are listed below - a)HUF:(i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. b)Partnership firm (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar.(ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm.(iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. c)Company registered under Companies Act 2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company(ii) A copy of Certificate of Incorporation(iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. d)LLP (Limited Liability Partnership): (i)A copy of LLP Agreement(ii) A copy of Certificate of Incorporation(iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP.(iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. e) Registered Society & Registered Trust: (i) A copy of Certificate of Registration(ii) A copy of Memorandum of Association of Society/Trust Deed(iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust.(iv) A copy of Rules & Regulations of the Society (f) Joint Venture : All documents as mentioned in Para 17 of the tender form ( second sheet).
Tenderer should submit /upload document of Firm details as per 'Annexure-I' of Tender Document
Uploaded scanned copies of applicable document as mentioned above the original instruments (Hard Copy) will be asked later by Sr. DEE/TRD&GSU/Ajmer office if required.
All the bidders/tenderers should ensure that they are GST Compliant and their quoted tax Structure/rates are as per GST law.
TRD work in c/w the provision of a shunting neck connected with pit and sick lines and an engine holding line connected with ART line at Udaipur station.
DRM-TRD-12-2026-27~NWR
DRM-TRD-12-2026-27
Open
Works - General
9 Months
Ajmer, Rajasthan
₹0
₹3.7 L
11 Sept 2026
11 Sept 2026
21 Sept 2026
119 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,85,80,451 | ||
| — | 2.00 | — | — | ||
| Preparation of design and drawing for over head equipment and verification of purchaser modification in plan | — | — | — | 43,282 | |
| — | 350.00 | — | — | ||
| Concrate for foundation and plinth in all type of soil and rock | — | — | — | 27,73,750 | |
| — | 62.00 | — | — | ||
| Supply of rolled or fabricated and galvanized traction mast, TTC, Portals, AT masts, feeder mast, bridge masts, DA, SPS etc | — | — | — | 82,07,250 | |
| — | 62.00 | — | — | ||
| Erection of rolled or fabricated and galvanized traction mast, TTC, Portals, AT masts, feeder mast, bridge masts, DA, SPS etc. | — | — | — | 6,38,786 | |
| — | 12.00 | — | — | ||
| Supply of material for Guy rod assembly | — | — | — | 1,45,692 | |
| — | 12.00 | — | — | ||
| Erection of material for Guy rod assembly | — | — | — | 21,216 | |
| — | 90.00 | — | — | ||
| Supply of Single bracket assembly | — | — | — | 29,55,240 | |
| — | 90.00 | — | — | ||
| Erection of single bracket assembly | — | — | — | 2,21,220 | |
| — | 200.00 | — | — | ||
| Supply of Large span wire (130sqmm) | — | — | — | 1,22,000 | |
| — | 200.00 | — | — | ||
| Erection of Large span wire (130sqmm) | — | — | — | 5,400 | |
| — | 10.00 | — | — | ||
| Supply of Large span wire Ending clamp (130 Sqmm) | — | — | — | 11,920 | |
| — | 10.00 | — | — | ||
| Erection of Large span wire Ending clamp (130 Sqmm) | — | — | — | 1,180 | |
| — | 1.00 | — | — | ||
| Supply of material for overhead equipment with complete fitting. (W/O Contact & catenary wire ) | — | — | — | 59,310 | |
| — | 1.00 | — | — | ||
| Erection of material for overhead equipment with complete fitting. | — | — | — | 56,043 | |
| — | 10.00 | — | — | ||
| Supply of material for regulating equipments (ATD) | — | — | — | 7,82,040 | |
| — | 10.00 | — | — | ||
| Erection of Material for regulating equipments (ATD) | — | — | — | 70,480 | |
| — | 4.00 | — | — | ||
| Supply for material for termination of Double conductor of overhead equipment | — | — | — | 69,032 | |
| — | 4.00 | — | — | ||
| Erection for material for termination of Double conductor of overhead equipment | — | — | — | 10,356 | |
| — | 1.00 | — | — | ||
| Supply of material for anticreep with galvanized steel wire. | — | — | — | 52,294 | |
| — | 1.00 | — | — | ||
| Erection of material for anticreep with galvanized steel wire | — | — | — | 4,396 | |
| — | 8.00 | — | — | ||
| Supply of material for solid core cut in (9 tonne) insulator | — | — | — | 90,584 | |
| — | 8.00 | — | — | ||
| Erection of material for solid core cut in (9 tonne) insulator | — | — | — | 7,648 | |
| — | 6.00 | — | — | ||
| Supply of material for suspension insulator | — | — | — | 66,708 | |
| — | 6.00 | — | — | ||
| Erection of material for suspension insulator | — | — | — | 3,906 | |
| — | 6.00 | — | — | ||
| Supply of material for post insulator | — | — | — | 52,968 | |
| — | 6.00 | — | — | ||
| Erection of material for post insulator | — | — | — | 3,672 | |
| — | 2.00 | — | — | ||
| Supply of material for section insulator assembly | — | — | — | 1,78,920 | |
| — | 2.00 | — | — | ||
| Erection of material for section insulator assembly | — | — | — | 9,628 | |
| — | 2.00 | — | — | ||
| Supply of material for single pole isolator without earth assembly | — | — | — | 1,85,018 | |
| — | 2.00 | — | — | ||
| Erection of material for single pole isolator without earth assembly | — | — | — | 9,010 | |
| — | 10.00 | — | — | ||
| Supply of material for Copper jumper | — | — | — | 71,630 | |
| — | 10.00 | — | — | ||
| Erection of material for Copper jumper | — | — | — | 5,410 | |
| — | 100.00 | — | — | ||
| Supply of Structure bonds | — | — | — | 1,06,000 | |
| — | 100.00 | — | — | ||
| Erection of structure bonds | — | — | — | 36,000 | |
| — | 50.00 | — | — | ||
| Supply of Longitudinal Bonds | — | — | — | 28,350 | |
| — | 50.00 | — | — | ||
| Erection of Longitudinal Bonds | — | — | — | 18,100 | |
| — | 50.00 | — | — | ||
| Supply of Transverse & special Bonds | — | — | — | 45,000 | |
| — | 50.00 | — | — | ||
| Erection of Transverse & special Bonds | — | — | — | 21,750 | |
| — | 5.00 | — | — | ||
| Supply of material for single earth electrode | — | — | — | 18,040 | |
| — | 5.00 | — | — | ||
| Erection of material for single earth electrode | — | — | — | 8,250 | |
| — | 24.00 | — | — | ||
| Supply of material for solid copper busbar 18mm | — | — | — | 44,352 | |
| — | 24.00 | — | — | ||
| Erection of material for solid copper busbar 18mm | — | — | — | 3,696 | |
| — | 2.00 | — | — | ||
| Supply of material for solid copper busbar connectors:- Bus splice | — | — | — | 7,502 | |
| — | 2.00 | — | — | ||
| Erection of material for solid copper busbar connectors:- Bus splice | — | — | — | 106 | |
| — | 60.00 | — | — | ||
| Transfer of OHE from one support to another support | — | — | — | 3,70,080 | |
| — | 5.00 | Each Span | — | ||
| Slewing of OHE | — | — | — | 26,245 | |
| — | 10.00 | Each Span | — | ||
| Supply of material for New dropper and re-adjustment of dropper | — | — | — | 42,520 | |
| — | 10.00 | Each Span | — | ||
| Erection of material for New dropper and re-adjustment of dropper | — | — | — | 5,320 | |
| — | 30.00 | — | — | ||
| Dismantling of Mast / Upright by gas cutting | — | — | — | 38,940 | |
| — | 2000.00 | — | — | ||
| Transportation charges for OHE material | — | — | — | 28,000 | |
| — | 7.00 | — | — | ||
| Dismantling of ATD (Regulating equipment) with counter weights. | — | — | — | 59,507 | |
| — | 50.00 | — | — | ||
| Breaking of Foundation | — | — | — | 1,58,800 | |
| — | 9.00 | — | — | ||
| Dismantling of guy rod with termination. | — | — | — | 11,538 | |
| — | 70.00 | — | — | ||
| Dismantling of existing cantilever assembly | — | — | — | 1,07,380 | |
| — | 3.00 | — | — | ||
| Construction of TSWR as per approved sectioning diagram and ACTM | — | — | — | 32,046 | |
| — | 200.00 | — | — | ||
| Fabrication and supply of traction SWR diagram boards of size approx 4'x3' or 6'x4' or 5'x4' on suitable acrylic FRP sheets framed in teak wood/ metal frame as per approved SWR diagram with coloring as per code of section. | — | — | — | 1,82,000 | |
| — | 20.00 | — | — | ||
| Dismantling of Portal, fabricated steel other than Mast/Upright | — | — | — | 1,67,280 | |
| — | 220.00 | — | — | ||
| Supply of 50 mm x 6mm MS flat earth bus | — | — | — | 58,520 | |
| — | 220.00 | — | — | ||
| Erection of 50 mm x 6mm MS flat earth bus | — | — | — | 19,140 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
DRM-TRD-12-2026-27.pdf
ATTACHMENT
Scheduleofratescopeandspecification.pdf Schedule scope and specs
ATTACHMENT
GCCforWorks.pdf
ATTACHMENT
GCCSC12.pdf
ATTACHMENT
Scheduleofratescopeandspecification.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .