S/R such as construction of construction of RCC box culvert (1X2X2)at Ch. 18/900 Km of Gunupur-Padmapur road during 2025-26

Dismantling and removing of RCC columns / beams slab including stacking the useful materials for reuse and removing the derbies within 50m lead including cost, conveyance, of all materials with all labour and T&P required for the work etc. complete as per standard specification and direction of Engineer-in-charge.

Dismantling and removing of CB Brick / Stone masonary in C.M/L.M up to 3.0 m height including stacking the useful materials for reuse and removing the derbies within 50m lead including cost, conveyance, of all materials with all labour and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.

Earth work in excavation for road work in all kinds of soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and disposal of soil using tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and disposal of soil with in all lifts and leads upto 1000m as per clause No.-301 of MoRT&H including cost, conveyance, of all materials with all labour and T&P required for the work etc. complete as per standard specification and direction of Engineer-in-charge.

Back filling of suplus excavated eart behind structures by manual means with initil lead 50 m and lift of 1.50mtr complete as per drawing andtechnical specification including cost, cnveyance and with all leads and lifts, royalities and taxes of all materials and labour, T&P etc. complete n all respect as per specification and direction of the Engineer-in-charge

Construction of embankment with approved materials obtained from borrow pits for side of drain by hydraulic excavator with all leads and lifts and transporting to site by mechanical means with a lead of 5 km spreading ,grading to required slope by means of Dozer as per requirement ,watering ,compacting by PRR etc as per Table 300-2 & 305 of MORT&H including cost & conveyance , royalties of earth with all labour with T&P required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge.

Sand filling in road & foundation of structure road trenches etc. quarrying, collecting, supplying good quality river sand as per clause No.401.4 and Section 2100 of MORT & H specification for road and bridge works (4th revision) laying in 15 cm (6'') thick layers watering to complete saturation & well rammed and dressed to proper grade and camber including cost, conveyance, royalties and all EMF,DMF and aditinal charges of all materials, all labour and T&P required for the work etc. complete as per the direction of the Engineer-In-Charge

RCC M-15 grade of CD & structure work using 40 mm to 10 mm size crushed stone aggregates mixed by concrete mixer laying in layers and compacting by vibrator and all leads and lifts as per approved Drawing and Techinical specifications and as per section 1700 & 2100 of MORATh specifications for road and Bridges works ( 5th Revision) including cost, conveyance, royalty, EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete as per drawing and Tecnical Specification and as directed by the Engineer-in- Charge.

RCC M-25 grade in different items using 20 mm to 10 mm size crushed stone aggregates mixed by concrete mixer laying in layers and compacting by vibrator and all leads and lifts as per approved Drawing and Techinical specifications and as per section 1700 & 2100 of MoRATH specifications for road and Bridges works ( 5th Revision) including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials and labour with T&P,Cess required for the work etc. complete as per drawing and Tecnical Specification and as directed by the Engineer-in- Charge. A) in Foundation raft of RCC Box culvert

B) In Substructure

C) In Superstructure

Steel reinforcement works in structure & CD work using HYSD (uncoated reinforcement bars of FE-500) steel of approved manufacturer as per section 1600 &section 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)

RCC M-30 grade wearing coat including of CD work with formwork using 20mm to 10mm hard black granite Crusher broken agreegates as per relevant clauses of Section 1200 & 2300 of MoRTH Specifications for Road & Bridge works (4th Revision) & including cost, conveyance, royalty and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete as per drawing and Tecnical Specification and as directed by the Engineer-in- Charge.

Providing Weep Holes with 100mm diameter A.C./PVC Pipe, fixing with cement motar in plain/ reinforced cement concrete as persection. 2200 & clause No.2706 of specification for Road and Bridge works of Ministry of Road Transport & Highways (4th Revision) &including cost of all materials, labour, T&P, EMF,DMF and aditinal charges royalty etc. complete in all respect and as per direction of the Engineer-in -chief.

Providing metal spall backing to weep holes of abutments, Deep drain with HB stone aggregates of using 50mm metal in rear side as per approved design and specification, including removal of clogged materials from weep holes and cost conveyance, EMF,DMF and aditinal charges royalities of all materials with cost of all labour, T&P,Cess and machineries required for the work complete in all respects as directed by the Engineer-in-charge.

Painting on concrete surface providing & applying two coats of water based cement paint to unplastered surface after cleaning the surface of dirt, dust ,oil ,grease,effloresence with cost conveyance and taxes of all materials and labour with T&P,Cess required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge

Painting Two coats with any approved Sinthatic Enamel paints of approved colour, shade over a coat of primer on any elevtion on road kerb,parapat & guard post ncluding cost of Paint conveyance,,Royalty, EMF,DMF and aditinal charges of materials, cost of labour, machinery T&P,Cess etc complete as per standard specification and Section-803. of MoRT&H specification for Road & Bridge direction of Engineer-in-charge..

Please Enable Macros to View BoQ information