CONSTRUCTION OF NEW DISTRICT COURT COMPLEX (15 COURT HALLS) IN KOPPAL TALUK AND KOPPAL DISTRICT

CONSTRUCTION OF NEW DISTRICT COURT COMPLEX (15 COURT HALLS) IN KOPPAL TALUK AND KOPPAL DISTRICT (Ground Floor)

Clearing and grubbing road land including uprooting rank

vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and t...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for pipeline trenches by mechanical means as per,drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barri...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, b...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all mate...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceedi...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings,balconies and likes, thickness upto 200 mm including cost of all materia...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Stairs (excluding landing) except spiral staircase including cost of all materials, labour complete...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for chajja, corbels etc., including edges including cost of all materials, labour complete as per speci...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed wit...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

KSRB 15.8 : Providing and fixing suitable plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chip...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops a...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyanceof all materials, labour for all items of work, HOM of equipment etc., complete as per specifica...

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drop...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja with plastering ( labour charges only ) as per specifications. Specification No.

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...

KSRRB M100-1 & M100-4.1. Conveying by Loading and unloading of moorum/debris. Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, including time for haula...

KSRB 2.5 : Earthwork excavation in all soil deposits and filling sides of foundation upto plinth in layers not exceeding 20cms. in depth, compacting each deposited layer by ramming after watering with...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargeSS Handles 300mm

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS hinges 125 mm.

Providing and Fixing MS Hold fast

Magnetic catcher triple type.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 300mm.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm.

Brass Screws of 50mm.

Nails of varying sizes.

Honne wood beading 20x20 mm

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...

Cornices and Elevation Features

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm...

Providing and supplying 'Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire rea...

Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in module size of 600 x 600 x 16mm with Exposed Grid for Hospitals,Shopping malls, Commercial establishments and office complexe...

Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced w...

Providing and laying of teak wooden polished flooring of 12mm thick, high density timber of approved colour and design with end trims, transition, profiles, beading, 15mm thick felt, and 20 micron pol...

Alluminium Expansion Joints-Expansion joints consists of aluminium base frame thickness 2mm,extruded and anodised aluminium plate of 4mm thickness width 125mm(for 25mm gap),150mm for(50mm gap),200mm (...

Wardrobe: Manufacturing, supplying and fixing wooden wardrobs of 0.60m deep using 19mm thick vinly bonded water sliding channels, shutters all-round wardrobe, lockable drawers with sliding channels, c...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

CONSTRUCTION OF NEW DISTRICT COURT COMPLEX (15 COURT HALLS) IN KOPPAL TALUK AND KOPPAL DISTRICT (FIRST FLOOR)

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all mate...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceedi...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings,balconies and likes, thickness upto 200 mm including cost of all materia...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for chajja, corbels etc., including edges including cost of all materials, labour complete as per speci...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

KSRB 15.8 : Providing and fixing suitable plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chip...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops a...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyanceof all materials, labour for all items of work, HOM of equipment etc., complete as per specifica...

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drop...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja with plastering ( labour charges only ) as per specifications. Specification No. KBS-4.21

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace /Chajjas/Sunken portion of WC:Bathroom, cold applied...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...

Bore Packing : Providing & applying high strength non shrink free flow grout (confirming to BS 1881-Part 116 : 1983)comprising of blend of portland cement, graded fillars and chemical additives which ...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargeSS Handles 300mm

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS hinges 125 mm.

Providing and Fixing MS Hold fast

Magnetic catcher triple type.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 300mm.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm.

Brass Screws of 50mm.

Honne wood beading 20x20 mm

Cornices and Elevation Features

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm...

Providing and supplying 'Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire rea...

Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in module size of 600 x 600 x 16mm with Exposed Grid for Hospitals,Shopping malls, Commercial establishments and office complexe...

Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced w...

Providing and laying of teak wooden polished flooring of 12mm thick, high density timber of approved colour and design with end trims, transition, profiles, beading, 15mm thick felt, and 20 micron pol...

Alluminium Expansion Joints-Expansion joints consists of aluminium base frame thickness 2mm,extruded and anodised aluminium plate of 4mm thickness width 125mm(for 25mm gap),150mm for(50mm gap),200mm (...

Wardrobe: Manufacturing, supplying and fixing wooden wardrobs of 0.60m deep using 19mm thick vinly bonded water sliding channels, shutters all-round wardrobe, lockable drawers with sliding channels, c...

CONSTRUCTION OF NEW DISTRICT COURT COMPLEX (15 COURT HALLS) IN KOPPAL TALUK AND KOPPAL DISTRICT (Second Floor)

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all mate...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceedi...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings,balconies and likes, thickness upto 200 mm including cost of all materia...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for chajja, corbels etc., including edges including cost of all materials, labour complete as per speci...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

KSRB 15.8 : Providing and fixing suitable plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chip...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops a...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyanceof all materials, labour for all items of work, HOM of equipment etc., complete as per specifica...

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drop...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja with plastering ( labour charges only ) as per specifications. Specification No. KBS-4.21

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace /Chajjas/Sunken portion of WC:Bathroom, cold applied...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...

Bore Packing : Providing & applying high strength non shrink free flow grout (confirming to BS 1881-Part 116 : 1983)comprising of blend of portland cement, graded fillars and chemical additives which ...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargeSS Handles 300mm

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS hinges 125 mm.

Providing and Fixing MS Hold fast

Magnetic catcher triple type.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 300mm.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm.

Brass Screws of 50mm.

Honne wood beading 20x20 mm

Cornices and Elevation Features

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make co...

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm...

Providing and supplying 'Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire rea...

Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in module size of 600 x 600 x 16mm with Exposed Grid for Hospitals,Shopping malls, Commercial establishments and office complexe...

Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced w...

Providing and laying of teak wooden polished flooring of 12mm thick, high density timber of approved colour and design with end trims, transition, profiles, beading, 15mm thick felt, and 20 micron pol...

Alluminium Expansion Joints-Expansion joints consists of aluminium base frame thickness 2mm,extruded and anodised aluminium plate of 4mm thickness width 125mm(for 25mm gap),150mm for(50mm gap),200mm (...

Wardrobe: Manufacturing, supplying and fixing wooden wardrobs of 0.60m deep using 19mm thick vinly bonded water sliding channels, shutters all-round wardrobe, lockable drawers with sliding channels, c...

CONSTRUCTION OF NEW DISTRICT COURT COMPLEX (15 COURT HALLS) IN KOPPAL TALUK AND KOPPAL DISTRICT (THIRD FLOOR)

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all mate...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceedi...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings,balconies and likes, thickness upto 200 mm including cost of all materia...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for chajja, corbels etc., including edges including cost of all materials, labour complete as per speci...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

KSRB 15.8 : Providing and fixing suitable plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chip...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops a...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyanceof all materials, labour for all items of work, HOM of equipment etc., complete as per specifica...

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drop...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja with plastering ( labour charges only ) as per specifications. Specification No. KBS-4.21

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/ Sunken portion of WC:Bathroom, cold applied...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...

Bore Packing : Providing & applying high strength non shrink free flow grout (confirming to BS 1881-Part 116 : 1983)comprising of blend of portland cement, graded fillars and chemical additives which ...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargeSS Handles 300mm

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS hinges 125 mm.

Providing and Fixing MS Hold fast

Magnetic catcher triple type.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 300mm.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm.

Brass Screws of 50mm.

Honne wood beading 20x20 mm

Cornices and Elevation Features

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make co...

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm...

Providing and supplying 'Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire rea...

Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in module size of 600 x 600 x 16mm with Exposed Grid for Hospitals,Shopping malls, Commercial establishments and office complexe...

Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced w...

Providing and laying of teak wooden polished flooring of 12mm thick, high density timber of approved colour and design with end trims, transition, profiles, beading, 15mm thick felt, and 20 micron pol...

Alluminium Expansion Joints-Expansion joints consists of aluminium base frame thickness 2mm,extruded and anodised aluminium plate of 4mm thickness width 125mm(for 25mm gap),150mm for(50mm gap),200mm (...

Wardrobe: Manufacturing, supplying and fixing wooden wardrobs of 0.60m deep using 19mm thick vinly bonded water sliding channels, shutters all-round wardrobe, lockable drawers with sliding channels, c...

CONSTRUCTION OF NEW DISTRICT COURT COMPLEX (15 COURT HALLS) IN KOPPAL TALUK AND KOPPAL DISTRICT (Terrace Floor)

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all mate...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceedi...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings,balconies and likes, thickness upto 200 mm including cost of all materia...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for chajja, corbels etc., including edges including cost of all materials, labour complete as per speci...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

KSRB 15.8 : Providing and fixing suitable plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chip...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops a...

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drop...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...

KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja with plastering ( labour charges only ) as per specifications. Specification No. KBS-4.21

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/ Chajjas/Sunken portion of WC:Bathroom, cold applied...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargeSS Handles 300mm

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS hinges 125 mm.

Providing and Fixing MS Hold fast

Magnetic catcher triple type.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 300mm.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm.

Brass Screws of 50mm.

Honne wood beading 20x20 mm

Cornices and Elevation Features

Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation o...

Alluminium Expansion Joints-Expansion joints consists of aluminium base frame thickness 2mm,extruded and anodised aluminium plate of 4mm thickness width 125mm(for 25mm gap),150mm for(50mm gap),200mm (...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges, and hire charg...

Internal Electrification Works

POINT WIRING USING COPPER WIRE WITHOUT SWITCH: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall. 1 - 2Way

Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall. 1 - 3Way

Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall. 4 - 5Way

Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall. 6 Way

Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall. 8 Way

Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall. 10 / 12 Wa...

Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall. 16 Way

Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall. 18 Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing me...

Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6 amps one way switch

Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6 amps two way switch

Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps 3 way sockets

Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. stepped fan Regulator'...

Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6/16 Amps universal so...

Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 16A one way switch

Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 32A DP switch

Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell push

Supplying and fixing one of 230 V Ding dong bell and a flush

type bell push with gang box fixed on necessary wooden or rawl

plugs using NF screws with Remote. Ding Donng bell

Extra length of GI pipe of class B 19mm dia for down rod.

Supplying And Fixing Metal Fan Box with Round Hook.

Open Conduit System: Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted...

Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of...

Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of...

Concealed Conduit System: Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The cond...

Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the ...

Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the ...

Groove Cutting in Wall: Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the tri...

Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18...

Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18...

Supplying and fixing PVC/metal conduit deep junction box. 19/20mm deep junction box

Supplying and fixing PVC/metal conduit deep junction box. 25mm deep junction box

Supplying and fixing PVC/metal conduit deep junction box. 32mm deep junction box

WIRING FOR Lighting/Power Circuits: FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 &...

FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments. 2.5...

FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments. 4 s...

FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments. 6sq...

FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments. 10s...

FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments. 16s...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 1.5 sq.mm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5 sq.mm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 4 sq.mm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 6 sq.mm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 10 sqmm

MCB DB & CABLE TRAY: Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacit...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suita...

Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suita...

Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suita...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking cap...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board. 32-40Amps 2 pole

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board. 63Amps 4 pole

Supplying of TPST with rewirable porcelain channels in SM

enclosure. Made out of 14 SWG powder coated paint of

approved colour. 63A

Supplying of TPST with rewirable porcelain channels in SM

enclosure. Made out of 14 SWG powder coated paint of

approved colour. 100A

Supply, Installation, testing & Commissioning of 63A, three phase 5pin Plug & socket outlet controlled by 63A 4pole MCB

Supply, Installation, testing & Commissioning of 32A, single phase 3pin plug & socket outlet controlled by 32A 2POLE MCB (IP45)

Supply & installation of 300 mm wide & 40mm height, 1.6 mm thick ladder type cable trays fixed with MS supports,anchor bolt etc.,complete as required at site.

Supply & installation of 150 mm wide & 40mm height, 1.6 mm thick Perfforated cable trays fixed with MS supports,anchor bolt etc.,complete as required at site.

Supply & laying of Raceways 200mm wide x 40mm Deep MS cold galvanised 16 guage made of CRCA sheet with removable type cover plate maximum length of each section shall not be more than 2.5 Mtrs. Length...

Supply & laying of Raceways 100mm wide x 40mm Deep MS cold galvanised 16 guage made of CRCA sheet with removable type cover plate maximum length of each section shall not be more than 2.5 Mtrs. Length...

Supply and laying double walled corrugated (DWC) HDPE pipe inculding all necessary connecting sockets / couplings / Tees / bends / End-caps of same materials in existing trench as per is 14930 part-11...

ELECTRICAL FIXTURES: Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 22...

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Pow...

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Po...

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree ...

Supply of round/square recess/surface mounted rolling

type LED Down light with ...... W GU 10 LED Lamp Rib

Fabricated from diecast aluminium with white powder

coated prewired to mains connector & has ...

Supply of round/square recess/surface mounted rolling

type LED Down light with ...... W GU 10 LED Lamp Rib

Fabricated from diecast aluminium with white powder

coated prewired to mains connector & has ...

Supplying & fixing - flexible LED Strip Light ..... W Power

consumption in 5 ms length CCT6500 degree K, CRI 70%.

efficacy 80 lumen per W, life 25000 burning hours and

Compliance to IS 10322/IEC 60598...

Supply and fixing of 12W LED retro fit lamp with holder

Supply and fixing of 2X22W LED Light Fixture

Supply and fixing of 18W LED Bulk Head light Fixture

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with

bracket blades complete for light duty suitable to operate on

230V 50Hz, AC Supply.

Supplying of Ceiling Fan with Capacitor rating As per

guideline of BEE 5 star rating and IS:374/79 and also

comply with IS: 1709/1984 with latest amendment, Rated

voltage 220 V/50 Hz, Rated power inpu...

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu...

Supplying wall mounting fan suitable to operate at singlephase

230v AC. supply. 400 mm Sweep

Fixing all types and all capacities of fluorescent /false ceiling /

spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated

Fixing a ceiling / Wall mounting fan of all capacities and all

types to the existing 'S'' hook with fan regulator to the existing

board together with supplying and fixing 5 A. ceiling rose,

Fixing one exhaust fan in the nitch already left in the wall with

bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

IP CCTV System, Cameras & Accessories supply, Installation, Testing & Commissioning of 4MP Lite IR Fixed-Focal Dome Network Camera, 1/3 CMOS image sensor, low illuminace, high image definition outputs...

Supply, Installation, Testing & Commissioning of 4MP IP Indoor Dome VF Camera with 1/2.8 CMOS image Sensor, 2.7mm-13.5mm Motorized lens, 2688 (H)x1520(V) resolution, 0.008 Lux @ F1.50 IR Illumination ...

Supply, Installation, Testing & Commissioning of 4MP IP Bullet VF Camera with 1/3 CMOS Image Sensor, 2.7mm-13.5mm Motorized lens, 2688 (H) x 1520 (V) resolution, 0.008 Lux at F1.5 IR Illumination Up t...

Supply Installation & Commissioning of 4MP 32x Starlight IR Wiz sense Network PTZ Camera, 1/2.8 4Megapixel STARVIS CMOS, Maximum Resolution 2560 (H) x 1440 (V), Power full 32x optical zoom, Max. 25/30...

Network Video Recorder (NVR): Supply, Installation Testing & Commissioning of 32ch NVR with Industrial embedded micro-processor, Embedded Linux operating system, 320 Mbps bandwidth, supporting resolut...

6TB HDD (Surveillance or Enterprise Grade)

24 x 100/1000 GbE Base-T 802.3at supported PoE+ Ports + 4 x 1GbE SFP Ports Managed Switch with Layer 2+ Image, 50 operating temperature support

16 x 100/1000 GbE Base-T 802.3at supported PoE+ Ports + 2x 1GbE SFP Ports Managed Switch with Layer 2+ Image, 50 operating temperature support

Supplying & Fixing of patch panel for LAN cabling .24 port 10/100/1000 patch panel

Supplying &fixing of 2mtr cat 6 Patch Cable

Supplying &fixing of I/Osocket, face plate with back box. Single I/O

Supplying & Fixing of sitch mountng rack with power manager & Cable manager. 32U with 650mm depth

Supplying & Fixing of sitch mountng rack with power manager & Cable manager. 9U with 450mm depth

Supplying & Fixing of Power strip

Supplying of shelf

Supplying & Fixing of Fan

Supplying & fixing of Castor wheels to the Shelf (set of 4)

SFP Single mode Gbs tranceiver module

Supply, Installation, Testing & Commissioning of 6 core single mode Armored Optic fibre cable OS1/OS2 - loose tube indoor/outdoor Loose Tube - 2.8 mm jelly filled loose tube with 2-24 fibres, Sheath -...

Supply and Installation of Fiber Optic Patch Chord for OFC Cable The rate shall include all mounting accessories complete as required ---- etc.,

Supply and Installation of 6P LIU For OFC Cable Termination The rate shall include all mounting accessories complete as required ---- etc

Fiber Termination box

CABLES: Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied...

Supplying and drawing UTP-CAT 6E LAN cable.

Supplying & Fixing of 32" HD TV with HDMI Cable & Acessories ( Fixing option Wall Mount & Table Mount both option required)

NETWORKING , TELECOMUNICATION & TV: Supplying and drawing UTP-CAT 6E LAN cable.

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2 Pair

Supplying & Fixing of sitch mountng rack with power manager & Cable manager. 6U with 450mm depth

Supplying & Fixing of sitch mountng rack with power manager & Cable manager. 32U with 650mm depth

Supplying fixing of Networking Switches. 24 Port 10/100/1000 Switch

Supplying fixing of Networking Switches. 24 Port Gigabyte (manageable)

Supplying fixing of Networking Switches. 16 Port 10/100/1000 Switch

Supplying & Fixing of Power strip

Supplying of shelf

Supplying & Fixing of Fan

Supplying & fixing of Castor wheels to the Shelf (set of 4)

Supplying &fixing of I/Osocket, face plate with back box. Single I/O

Supplying &fixing of I/Osocket, face plate with back box. Double I/O

Supplying &fixing of 2mtr cat 6 Patch Cable

Supplying &fixing of 3mtr cat 6 Patch Cable

Supplying & Fixing of patch panel for LAN cabling. 24 port 10/100/1000 patch panel

Supplying and fixing of modular switch / socket / stepped electronic fan regulator's / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. TV socket

Supplying & Fixing of 32" HD TV

Supplying and drawing PVC insulated gas injected physical

foam jelly flooded co-axial TV cable.RG-6.

Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 20 pair krone module with MDF BOX

Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 30 pair krone module with MDF BOX

250 Pair Krone Module with MDF BOX

Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the ...

Supply & Fixing of GbESpeed Wifi Router, PoE Support.

SFP Single mode Gbs tranceiver module

Supply, Installation, Testing & Commissioning of 6 core single mode Armored Optic fibre cable OS1/OS2 - loose tube indoor/outdoor Loose Tube - 2.8 mm jelly filled loose tube with 2-24 fibres, Sheath -...

Supply and Installation of Fiber Optic Patch Chord for OFC Cable The rate shall include all mounting accessories complete as required ---- etc.,

Supply and Installation of 6P LIU For OFC Cable Termination The rate shall include all mounting accessories complete as required ---- etc

Fiber Termination box

EPABX:- Supply,Installation,Testing & Commissioning of micro-processor based, state of the Art, Telephone PBX System , IP READY,based on Linux/GRUB compliant, integrated Software for multiTasking fo...

TELEPHONES Digital Phones

TELEPHONES Analog push button telephone with Caller ID, flash and radial

Biometric System: Supply,Installation,Testing & Commissioning of Biometric reader with 125kHz EM,

Supply & Fixing of PC , T & A Software,

PA SYSTEM: Supply, Installation, testing & Commissioning of 1.5/3/ 6W wall Speaker Complete as required

Supply, Installation, testing & Commissioning of 6Zone Voice alarm Controller with USB, MP3 Player,(Including 6Zone Button paging Station) with seamless Integration Facility with main fire alarm pane...

Supply, Installation, testing & Commissioning of Voice Command Keypad 6 Zone, with microphone assembley complete as required.

Supply, Installation, Testing & commissioning of Power Amplifier 400 W

Supply & Installation of 2Cx1.5 Sqmm

Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the ...

Supplying & Fixing of sitch mountng rack with power manager & Cable manager. 24U with 450mm depth

Supplying & Fixing of Power strip

Supplying of shelf

Supplying & Fixing of Fan

PHE Works (Water supply & Sanitary)

SANITARY FIXTURES AND CP FITTINGS: Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous ch...

Supplying, fixing, testing and commissioning of CP health faucet consisting of: 1 No. 15mm dia CP Angle cock with wall flange. PVC flexible tube of 1.00m long tube with end nuts. Hand operated spray u...

Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a Economy

Supplying and fixing of Double coat hook Fixed on the toilet Door as directed by the Engineer in charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the ...

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges an...

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 450 mm length

Providing and fixing Angle cock medium with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class

Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weig...

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having w...

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 g

Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less...

Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a Economy

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.

Supplying, fixing, testing and commissioning of portable Water Cooler (Floor mounted model) in corridors for drinking water with all the necessary accessories etc.

GI PIPES AND FITTNGS (INTERNAL AND EXTERNAL WATERSUPPLY): Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of f...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Supply and delivery at site GM (copper alloy) Gate Valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

Supply and delivery at site GM (copper alloy) Gate Valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

Supply and delivery at site GM (copper alloy) Gate Valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

Supply and delivery at site GM (copper alloy) Gate Valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

Supply and delivery at site GM (copper alloy) Gate Valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

Supply and delivery at site GM (copper alloy) Gate Valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing, fixing, testing and commissioning of lawn hydrant ball valves of brass body nickel plated with stainless steel ball, lever operated with gun metal nozzle for connecting rubber hose and ...

Supplying , installing, testing and commissioning of brass body nickel plated automatic air release valves with brass splindle, NBR and joinfraniteelastomer, staniless steel spring polypropylenic fl...

Supplying and fixing in position solid block masonry pedestals of approaximate size 300x230x230mm with brackets and G.I clamps for laying pipes on terrace. etc,. complete as directed by the Engineer i...

Providing & fixing of brassY / pot stainer screw type tested to 20 kg / sq.cm. 50 mm dia

Supply and fixing of GM ball cock with copper float(High pressure float) of approved brand of manufacture and fixed on to the inlet pipe at the underground sump tank & OHT. 32 mm dia

Providing GM (copper alloy) wheel valves/ check valve confirming to IS 778/1990 Class-I with latest amendments No. 1 and with ISI mark screwed in bonnet integral seat inside, screw, rising spindle scr...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Supplying, laying, jointing, testing and commissioning of PVC pipes class III 6 kg/cm2 waste pipe of agricultural series conforming to IS 4985 including all fittings like tees, elbows, bends, collars...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by applicati...

Providing, fixing, testing and commissioning of PVC gullytrap of 150 x 150 mm size with 100 mm dia outlet making excavation pit in all kinds of soil and laying of 100 mm thick 1:4:8 mix cement concret...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster ...

Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster ...

Earth work excavation for pipeline/cables by manual means upto 600mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, c...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, Consolidating each deposited layer by ...

PVC RAIN WATER PIPES AND FITTINGS: Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing, fixing, testing and commissioning of PVC welded rain water head / khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC sheet...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Rain harvest pit of size 1200 mm dia and 3.50 m deep is proposed to be constructed. The rain water harvest pit consists of 300 mm deep RCC precast rings along with 50mm dia holes from the invert level...

DOMESTIC WATER TRANSFER PUMPS: Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 3 HP, size 50x40 H...

Fire fighting Works

FIRE PUMP ROOM EQUIPMENT Supply, erection, testing & commissioning of Electrical Motor Driven end suction back pull out centrifugal pump capable of delivering, adequate LPM at required head. when run...

Supply, installation, testing & commissioning of Diesel Engine Driven pump, horizontal mounted, Horizontal spilt case centrifugal single stage pump, capable of delivering required flow at required hea...

Supply, Installation, testing and commisioning Electrically Driven Jockey pump of capacity 180.0 Lpm at required head end suction type bronze impeller pump oupled to electrical driven motor with suita...

Supply, erection, testing and commissioning of Fire Fighting Panel cubicle type made out of 14/16 Swg MSCRCA sheet which is derusted, degreased, phosphated and passivated with angle iron skeleton or s...

1100 V GRADE POWER / CONTROL CABLES Supplying, laying, testing & commissioning of XLPE, PVC outer sheatehed, steel armoured, aluminium conductor, 1100v grade power cables with glands etc.The cables ...

Supplying, laying, testing & commissioning of XLPE, PVC outer sheatehed, steel armoured, aluminium conductor, 1100v grade power cables with glands etc.The cables shall be laid in tray / Hume pipe / i...

Supplying, laying, testing & commissioning of XLPE, PVC outer sheatehed, steel armoured, aluminium conductor, 1100v grade power cables with glands etc.The cables shall be laid in tray / Hume pipe / i...

Supplying, laying, testing & commissioning of XLPE, PVC outer sheatehed, steel armoured, aluminium conductor, 1100v grade power cables with glands etc.The cables shall be laid in tray / Hume pipe / i...

CABLE TRAY Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 500 mm....

G.I. Earthing strips of 25mm x 6mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with neccessory accessories as required. ( Earth pit shall be execu...

G.I. Earthing strips of 25mm x 3mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with neccessory accessories as required. ( Earth pit shall be execu...

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...

Supplying installing, testing and commissioning of PN 16 CI" Non Return Valve" confirmingto IS 13039 with necessary bolts and nuts etc complete includes cost of all materials labour charges with all l...

Supplying installing, testing and commissioning of PN 16 CI" Non Return Valve" confirmingto IS 13039 with necessary bolts and nuts etc complete includes cost of all materials labour charges with all l...

Supplying, installing, testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete----etc., complete as per specificaiton with all lead a...

Supplying, installing, testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete----etc., complete as per specificaiton with all lead a...

Supplying, installing, testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete----etc., complete as per specificaiton with all lead a...

Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. 50 mm dia

Supply, Erection, Testing & commissioning of Foot Valves of Following Dimensions Including all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete wor...

Supply, Erection, Testing & commissioning of Foot Valves of Following Dimensions Including all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete wor...

Pressure Switch including Isolation Valve and forged siphon Tube including with all accssories as per IS:Spec.----etc., complete as per specificaiton with all lead and lift, loading unloading, labour,...

Pressure guage of 150 mm dia including Isolation Valve and forged siphon Tube including with all accssories as per IS:Spec.etc., complete as per specificaiton with all lead and lift, loading unloading...

Exhuast pipe for Diesel engine of 150 mm dia M.S. Medium grade with mineral wool insulation with aluminum sheet. a)150 mm dia M.S. Medium grade with mineral wool insulation with aluminum sheeting.

Exhuast pipe for Diesel engine of 150 mm dia M.S. Medium grade with mineral wool insulation with aluminum sheet. b)150mm dia M.S. Medium grade shall be laid above ground with structuralsteel supports.

Supply & Erection of Priming tank of capacity 500 liters capacity complete with all accessories. Provide SINTEX tank, with all necessary nozzles and complete MS frame work ...

HYDRANT SYSTEM Supplying, installing, testing & commissioning approved make heavy duty (Class'C') GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bend...

Supplying, installing, testing & commissioning approved make heavy duty (Class'C') GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, checknuts, u...

Supplying, installing, testing & commissioning approved make heavy duty (Class'C') GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, checknuts, u...

Wraping and Galingof U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. Including cost of materials, labour, usage charges of machinery complete a...

Wraping and Galingof U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. Including cost of materials, labour, usage charges of machinery complete a...

Supplying Installing, testing and commissioning of 63 mm dia double headed Gun mental Hydrant Valve with flanged inlet 2Nos, stop valve, spindle and cast iron hand wheel. It has a 2 Nos female instant...

Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25 mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. Complet...

Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63 mm dia x 19mm dia as per IS 903 complete including cost of materials, labour, usage charges of machinery complete as...

Supplying Installing, testing and commissioning of Reinforced Rubber Lined 2nos. RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Femal elnstantainious Gun metal cou...

Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at out...

Supplying Installing, testing and commissioning of Hose reel cabin

Supplying Installing, testing and commissioning of 19mm dia 40.0m length hose with rubber lining smooth bore, reinforced of natural/synthetic fibres, a rubber cover finish shall be smooth, fluted or f...

YARD HYDRANT Supplying Installing, testing and commissioning of 63mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a female instan...

Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at out...

Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63 mm dia x 19mm dia as per IS 903 complete including cost of materials, labour, usage charges of machinery complete as...

Supplying Installing, testing and commissioning of Reinforced Rubber Lined 2nos. RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Femal elnstantainious Gun metal cou...

Supplying Installing, testing and commissioning of 150mm dia 4way Fire brigade inlet connection with Non retrn valve of 4nos. 63mm dia. Including cost of materials, labour, usage charges of machinery ...

FIRE EXTINGUISHERS: Supply and installation of 2kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 3.6Kg, empty weight 1.6Kg, Can Height 344MM, ...

Supply and installation of 6kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5Kg, empty weight 3.5Kg, Can Height 435MM, Diameter 160 MM, Dis...

Supply and installation of 9 Lts Fire Extinguisher Aqueous Film Forming Foam Type, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5Kg, empty weight 3.5Kg, Can Height 615MM, Diameter 175 MM, Disc...

Supply and installation of 45 Lts Water Type Fire Extinguisher Stored Pressure Type, Pressure Gauge, Gross Weight 15.1Kg, empty weight 6.1Kg, Can Height 615MM, Diameter 175 MM, Discharge Time less tha...

SIGNAGES Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam bo...

SIGNAGES Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam bo...

Providing and fixing in position the signages " FIRE ORDER" it should contain the following matter on 3mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle pai...

ACTION BY SECURITY/RECEPTION UPON RECEIPT OF INFORMATION THROUGH FIRE ALARM OR FIRE DETECTORS OR BY USING PUBLIC ADDRESS SYSTEM. B a)ALERT THE OCCUPANTS BY USING PUBLIC ADDRESS SYSTEM. b)INFORM FIRE C...

CIVIL WORKS Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of s...

Supply and installation of RCC hume pipes of 300 mm dia & NP 2 Class with collars for road / below floor crossing of Fire water pipes. The rate shall includes excavation, PCC ( 1:4:8 100 mm thick)bed...

Supply and construction of PCC (1:2:4) pedastals / supports for Under ground / above ground pipes. Quoted rate shall inclusive of excavation ( if required ), chipping / chasing, shuttering, plastering...

Sealing of Fire shafts at all floor levels by using M.S. angle frame around the shaft M.S. chequered plate and PCC of 1:2:4 ( 100mm thick) on the plate for whole shaft area as per drawings and enginee...

AUTOMATIC SPRINKLER SYSTEM Supplying, installing, testing & commissioning approved make heavy duty (Class'C') GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long...

Supplying, installing, testing & commissioning approved make heavy duty (Class'C') GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, checknuts, u...

Supplying, installing, testing & commissioning approved make heavy duty (Class'C') GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, checknuts, u...

Supplying, installing, testing & commissioning approved make heavy duty (Class'C') GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, checknuts, u...

Supplying, installing, testing & commissioning approved make heavy duty (Class'C') GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, checknuts, u...

Supplying, installing, testing & commissioning approved make heavy duty (Class'C') GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, checknuts, u...

Supplying, installing, testing & commissioning approved make heavy duty (Class'C') GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, checknuts, u...

Supplying, installing, testing & commissioning approved make heavy duty (Class'C') GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, checknuts, u...

Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. 50 mm dia

Supplying, installing, testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete----etc., complete as per specificaiton with all lead a...

Supplying Installing, testing and commissioning of, pendent Type/Upright Type, Standard Response Standard Coverage, Sprinkler,K5.6(80),1/2”NPT, 68 Degree C, Chrome finish, UL listed.

Supplying, installing, testing and commissioning flow switch on sprinkler distribution header on each floor and shall be connected to fire alarm panel through cable. Cable shall be measured seperately...

Supplying, Installing, testing and Commissioning sprinkler annunciation panel with slots for each flow switch

AUTOMATIC FIRE ALARM SYSTEM : Supply, installation, testing and commissioning of addressable peer to peer Networkable analogue addressable type fire alarm control panel with minimum 1500 Character / 2...

Supply, intallation, testing and Commissioning of loop card etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of ...

Supply, intallation, testing and Commissioning of Graphical software for entire fire alarm panels including detector configuration, commissioning etc

Supply, Installation, Testing & Commissioning of Network Active Repeater Panel with 1500 Character / 240X64 Pixel / 7inch Touchscreen. The LCD shall Display all events / detectors, devices status of c...

Supply, intallation, testing and Commissioning of 'Rate of Rise Heat Detectors (Thermal Detectors): Addressable analogue type Heat Detectors with solid state design with sensing element combination of...

Supply, intallation, testing and Commissioning of Hooter storb light with minimum 85 db audiable and control relay module, power supply units etc @ 3m for Audible annunciation and 75cd flashintg at 1 ...

Supply, install, test and commissioning of Analogue addressable Manual Call Point (Resettable Type) with inbuilt isolator and LED indicator, designed for IP44 requirements and approved to operate in -...

SITC OF control module Supply & fixing of control / monitor module to monitor hooters,Mcp located at various floor.

SITC OF Relay/Fault isolation module- Analog addressable fault isolator circuit modules of wall mounted type with mounting accessories.

Supply, intallation, testing and Commissioning of Network card for fire alram panels integration

1.5GHz Intel Pentium Silver J5005 (1.5 GHz base frequency, up to 2.8 GHz burst frequency, 4 MB cache, 4 cores) processor, 4GB DDR4 RAM, 1TB 7200rpm hard drive, 27-inch screen, UHD Gr...

Supply, intallation, testing and Commissioning of 2C 1.5 sq mm armoured FRLS cables in celing with suitable clamps and screws (RED colour)

Communication Module complete with all lead & lift, as per specifications and as per directions of the Engineer in charge

Communication Module complete with all lead & lift, as per specifications and as per directions of the Engineer in charge

Providing Dual Chamber Ionisation type Smoke Detectors complete ---- Including cost and conveyance of all materials, Labour, Hire charges of Machineries and Equipment's with all lead and lifts, loadin...

Supply, install, test and commissioning of analogue addressable Multisensor having three sensors (OH2) i.e. one optical and dual heat sensor (Static and ROR both), It shall have multiple modes with mi...

SITC of Galranised M.S. Junction box size 100x100x25mm suitable for fixing of smoke detector ---- etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-c...

Interior & Furniture Works

GROUND FLOOR WAITING ROOM Metal Perforated Chair on Bench-3 Seater : Metal Perforated 3 seater Bench having of size: W 1680 mm X D 570 mm X H 850 mm Seat height 460 mm, SEAT/BACK FRAME ASSEMBLY: T...

JUDGE CHAMBER Sofa seating : Providing and placing of fully upholstered sofas with art leather finish. Two Seater (Market price)

Centre table : Providing and fixng of 10mm glass top table with lamianted wooden support base. (Market price)

Workstations: Providing and fixing CUBICLE WORKSTATIONS consisting of WINGS made out of 75mm thick MS CRCA powder coated, tile based system for main op tile finish 8mm thick MDF covered with Fabreic o...

ACCUSED ROOM/ STATIONARY Pedestal: Providing and fixing 450mmW x 450mmD x 685 mm Ht Mobile pedestal unit - Wooden with 18mm thick PLPB with edge bonded for body, Two wqual drawers and filing drawer wi...

OFFICE ROOM Chairs for office : Providing and fixing of medium back netted chairs with a five-point unit adjustable base with casters.seat pan has adjustable for forward and backward tilt angle indepe...

JUDGE CHAMBER Main Table with side: Providing and fixing free standing table for cabin table made up of 19mm laminated ply with double thk edges. The table is provided with storaged side table. Main T...

Chairs for JUDGES : Providing and fixing of High back leather chairs with a five-point unit adjustable base with casters.seat pan has adjustable for forward and backward tilt angle independent of lumb...

CONFERENCE HALL LED TV: Supplying and installing 55 inch SMART LED TV unitof sony/LG or approved make (Market price)

Conference Tables : Providing and fixing conference table consisting of 25 mm thick PLPB table topedge bounded, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, ...

Chairs for conference room : Providing and fixing of executive Conference chairs with a five-point unit adjustable base with casters.seat pan has adjustable for forward and backward tilt angle indepen...

MIATION ROOM Chairs : Providing and fixing of medium back netted chairs with a five-point unit adjustable base with casters.seat pan has adjustable for forward and backward tilt angle independent of ...

COMPUTER ROOM Computer Table: Providing and fixing STRAIGHT WORKSTATION (Frame) unit made out of 75mm thick MS CRCA powder coated, tile based system for main Top tile finish 8mm thick MDF covered wit...

Chairs for Computer section : Providing and fixing of medium back netted chairs with a five-point unit adjustable base with casters.seat pan has adjustable for forward and backward tilt angle independ...

OFFICE ROOMS Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLPB table top, 25 mm thick PLPB with edge bomded End table,18 mm thick PLPB with edge bonded ...

MAITION ROOM Meeting Table : Providing and fixing meeting table consisting of 25 mm thick PLPB table top edge bounded, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Mo...

COURT HALL FURNITURE

DIAS for Judges:Providing and fixing dias for judges in court halls of overall size 3650 x 3050 x 600 mm using 40 x 40 x 2mm slotted angle for frame work at suitable intervals usi...

Item Description : Teak wood platform:

Providing and fixing wooden platform of overall size 2450x1850x175mm using teak wood of section 50x50mm of legs, 50x50mm for horizontals both at suitable interva...

Teak Wood Witness Box : Length 4'xWidth 2.5'xHeight 4', made out of Teak wood legs (turning) size 4"x4" with side bars 3"x2". The Height from the ground shall be 6" with 18mm OST . Back

Jungle wood su...

Teak Wood Accused Dock : Of size Length 8'xwidth 3'xHeight 4' with wooden platform. Made out

of Teak wood leg size 4"x4". Side bars shall be 2"x2" . All the side shall be covered with 2"x1"

SIRASTIDAR/ E SEVA KENDRA ROOM/E FILLING STATIONARY ROOM Chairs : Providing and fixing of medium back netted chairs with a five-point unit adjustable base with casters.seat pan has adjustable for forw...

Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLPB table top, 25 mm thick PLPB with edge bomded End table,18 mm thick PLPB with edge bonded Modesty, Wire...

Godrej alhmeras: Size: 900mmX 475mmX1950mm ht.with 4 shelves. (Market price)

Pin-up and white boards: Providing and fixng of writing boards made up of 12mm ply finished with 1mm glossy white writing lamiante and the pin up board with 12mm soft board and finished with plain col...

Teak Wood Dias Reiling :- Made out of 3"x3" turning legs, affixed together in 2"x1" patti at top & bottom maintaining a distance of 12" between every leg. Further finished with 3"x1.5" pattis on top a...

Supplying, erecting, testing & commissioning of ON-LINE UPS

system suitable for operation on 230V, 50Hz, A/C supply,

with isolation transformer all accessories complete and

Excluding batteries and wir...

Supplying, installation, testing & commissioning of 12V DC, AH

batteries in poly propylene container for U.P.S. Sealed

maintenance free batteries. 75/80 AH capacity

Supplying, erecting, testing & commissioning of ON-LINE UPS

system suitable for operation on 230V, 50Hz, A/C supply,

with isolation transformer all accessories complete and

Excluding batteries and wir...

Supplying, installation, testing & commissioning of 12V DC, AH

batteries in poly propylene container for U.P.S. Sealed

maintenance free batteries. 100 AH capacity

20 kVA Modular UPS Three Phase Input, Three Phase Output(Hot Swipable with 20 kVA per module). Supply of 20 KVA UNINTERRUPTED POWER SUPPLY SYSTEM with Moudular type : - Digital Technology Three Phase ...

Supply of Battery Accessories * Battery Breaker * Intererconnecting cables between batteries. * Battery stand for housing the batteries * Cables between UPS & Batteries [5 Mtrs. Max]

CONTROL SWITCH GEARS & ACCESSORIES, LT KIOSK. Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provisi...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/ FRP/DMC ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden

Current Transformer Class 0.5 accuracy with Tape Wound.

Supplying, fixing and wiring 0 to 600V 96x96mm AC

Voltmeter on existing panel/wood board.

Supplying, fixing and wiring earth leakage relay with core

balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital ...

Supplying, fixing and wiring 0 to 1500A CT operated AC analog

type Ammeter without CT

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring 3 Phase Digital Ammeter /

WIRES & CABLES : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open ...

WIRES & CABLES : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open ...

Supplying, fixing and wiring 3 Phase TVSS

MAIN PANEL :Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissip...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC ...

Supplying and fixing angle iron frame work fabricated out of

M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying, fixing and wiring 3 Phase TVSS

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden

Current Transformer Class 0.5 accuracy with Tape Wound.

Supplying, fixing and wiring 0 to 600V 96x96mm AC

Voltmeter on existing panel/wood board.

Supplying, fixing and wiring earth leakage relay with core

balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital ...

Supplying, fixing and wiring 0 to 1500A CT operated AC analog

type Ammeter without CT

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring 3 Phase Digital Ammeter /

WIRES & CABLES Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or...

WIRES & CABLES Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or...

WIRES & CABLES Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or...

Supplying, fixing and wiring 3 Phase TVSS

APFCR PANELS : Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dis...

Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, ...

Supplying .. A rated 3Phase with Neutral bus bar arrangement using required capacity Electrolytic Al strips covered with Heat shrinkable PVC sleves mounted on Phenolic/FRP/DMC insulators which are mou...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing of Modular MCB Devices (Tripper)

With Breaking capacity of 6kA. Out Goings 100 A 25 kA

Supplying and fixing of Modular MCB Devices (Tripper)

With Breaking capacity of 6kA. Out Goings 16 - 32 A TP MCB

Supplying and fixing angle iron frame work fabricated out of

M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then ...

Fixing a shunt capacitor of ... kVAR capacity with necessary clA, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. 6 to 10 kVAR

Fixing a shunt capacitor of ... kVAR capacity with necessary clA, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. 11 to 20 kVAR

ILPB Type push button with Lanmp - ON/OFF(L&T Make)

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-1...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz

Supplying, fixing and wiring 1000/5A to 1600/5A 15VA

Burden class 1 Current Transformer

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4...

WIRES & CABLES Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or...

WIRES & CABLES Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or...

WIRES & CABLES Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or...

OUTDOOR PANEL Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dis...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz

Supplying, fixing and wiring 0 to 600V 96x96mm AC

Voltmeter on existing panel/wood board.

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital ...

Supplying, fixing and wiring 0 to 1500A CT operated AC analog

type Ammeter without CT

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring 3 Phase Digital Ammeter /

WIRES & CABLES Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or...

WIRES & CABLES Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or...

WIRES & CABLES Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or...

MAIN PANEL.1 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissi...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC ...

Supplying and fixing angle iron frame work fabricated out of

M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying, fixing and wiring 3 Phase TVSS

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden

Current Transformer Class 0.5 accuracy with Tape Wound.

Supplying, fixing and wiring 0 to 600V 96x96mm AC

Voltmeter on existing panel/wood board.

Supplying, fixing and wiring earth leakage relay with core

balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital ...

Supplying, fixing and wiring 0 to 1500A CT operated AC analog

type Ammeter without CT

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring 3 Phase Digital Ammeter /

WIRES & CABLES Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or...

WIRES & CABLES Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or...

WIRES & CABLES Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or...

Supplying, fixing and wiring 3 Phase TVSS

MAIN PANEL.2 : Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dis...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/ FRP/DMC ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying, fixing and wiring 3 Phase TVSS

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz

Supplying, fixing and wiring 0 to 600V 96x96mm AC

Voltmeter on existing panel/wood board.

Supplying, fixing and wiring earth leakage relay with core

balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital ...

Supplying, fixing and wiring 0 to 1500A CT operated AC analog

type Ammeter without CT

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring 3 Phase Digital Ammeter /

WIRES & CABLESWiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed syst...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed syst...

MAIN PANEL.3: Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat diss...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/ FRP/DMC ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying, fixing and wiring 3 Phase TVSS

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz

Supplying, fixing and wiring 0 to 600V 96x96mm AC

Voltmeter on existing panel/wood board.

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital ...

Supplying, fixing and wiring 0 to 1500A CT operated AC analog

type Ammeter without CT

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring 3 Phase Digital Ammeter /

WIRES & CABLESWiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed syst...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed syst...

LIGHTING PANEL.1 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat d...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/ FRP/DMC ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz

Supplying, fixing and wiring 0 to 600V 96x96mm AC

Voltmeter on existing panel/wood board.

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital ...

Supplying, fixing and wiring 0 to 1500A CT operated AC analog

type Ammeter without CT

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring 3 Phase Digital Ammeter /

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

LIFT PANEL .1 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat diss...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/ FRP/DMC ...

Incomer / Out Goings Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF,...

Incomer / Out Goings Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF,...

Supplying, fixing and wiring Earth Leakage Miniature Circuit

Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 32-40 A 4 pole

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz

Supplying, fixing and wiring 0 to 600V 96x96mm AC

Voltmeter on existing panel/wood board.

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital ...

Supplying, fixing and wiring 0 to 1500A CT operated AC analog

type Ammeter without CT

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring rotary selector switch suitable

Supplying, fixing and wiring 3 Phase Digital Ammeter /

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

SWITCHES, SOCKETS & ACCESSORIES 6/16A Universal Socket

Audio, Video and Accoustic Works

Supply,Installation, Testing and Commisioning of 15" 2-Way Passive Loudspeaker, 500 W Continuous, Coverage: 90 x 60 Make EV/JBL Or Equalent approved by Engg incharge

Supply,Installation, Testing and Commisioning of 12" 2-Way Passive Loudspeaker, 350 W Continuous, Coverage: 90 x 60 Make : EV/JBL Or Equalent approved by Engg incharge

Supply,Installation, Testing and Commisioning of 18" Passive Subwoofer, 400 W Continous, Wood enclosure

Supply,Installation, Testing and Commisioning of Live 2x 950W with In built DSP Complete with FIR Filters, Audio Limiters, Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load Imp...

Supply,Installation, Testing and Commisioning of Live 2x 1400W with In built DSP Complete with FIR Filters, Audio Limiters, Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load im...

Supply,Installation, Testing and Commisioning of 12 Channel Mixer, Max. 6 Mic / 12 Line Inputs (4 mono + 4 stereo) 2 GROUP Buses + 1 Stereo Bus 2 AUX (incl. FX)

Supply,Installation, Testing and Commisioning of Powered Stage Monitor Make : EV/JBL Or Equalent approved by Engg incharge

Supply,Installation, Testing and Commisioning of High Quality UHF Band Frequency Duet Wireless Microphone System, 80 Selectable UHF Channels, Easy setup of the system with Infra Red Make : AKG/Shure ...

Supply,Installation, Testing and Commisioning of High Quality UHF Band Frequency Duet Wireless Microphone System, 80 Selectable UHF Channels, Easy setup of the system with Infra Red Make : AKG/Shure ...

Supply,Installation, Testing and Commisioning of Headworn Mic.

Supply,Installation, Testing and Commisioning of Gooseneck Mic. with Base, Electret condenser, 21" mic. length, Anti Mobile & RF Interference Technology Make : AKG/Shure or Equalent Approved make

Supply,Installation, Testing and Commisioning of Pixeless Smart Podium body made with CRCA steel, duly powder coated, security lock, sliding lock cover for Touch display, space for keyboard & mouse d...

Supply,Installation, Testing and Commisioning of Interactive Tablet

Supply,Installation, Testing and Commisioning of 3D visualiser for object viewing Make: EPSON / Elmo/Wolfvision/Eqvt approved by Engineer in charge ---- etc., complete with all lead & lift, as per s...

Supply,Installation, Testing and Commisioning of Flush Mounted Cable Cubby 6 slots for vga, hdmi & audio

Supply,Installation, Testing and Commisioning of 4 x 4 VGA Matrix Switcher - Milestone

Supply,Installation, Testing and Commisioning of 4 x 4 HDMI Matrix Switcher - Milestone

Supply and laying of Speaker cables Special 16AWG shielded twisted pair copper cable Make: Kramer/Eqvt approved by Engineer in Charge ---- etc., complete with all lead & lift, as per specifications...

Supply,Installation, Testing and Commisioning of 25 mrts VGA+Audio cables Make: Extron/Kramer/Eqvt approved by Engineer in charge ---- etc., complete with all lead & lift, as per specifications and ...

Supply,Installation, Testing and Commisioning of 25 mrts HDMI cables Make: Extron/Kramer/Eqvt approved by Engineer in charge ---- etc., complete with all lead & lift, as per specifications and as pe...

Supply and Fixing of 105-inch, 21:9 ultra-wide interactive display with native 5K resolution. Built for seamless functionality in corporate spaces, the IFP105S offers an immersive sharing solution. Th...

Supply and Fixing of Ops i5,8gb,ram,256gb ssd,with Windows 10 Pro

Supply and Fixing of Ceiling suspended bracket

Supply, and Fixig of 75" 4K Interactive Display New Exterior Design with Innovative Multimedia Sound Bar USB-C for plug-and-play connectivity via a single cable Dual-pen, 33-point touch with naturall...

Supply and Fixing of Ops i5,8gb,ram,256gb ssd,with Windows 10 Pro

Supply and Fixing of Wall Mount Bracket for View Board Display

Supplying, Installation, testing and commissioning of EAGLEEYE IV USB HD 1080p video at 30 frame per second Wide field of view (72.5 Horizontal, 44.8 Vertical Field of View) with ...

Supplying, Installation, testing and commissioning of Control unit Better discussion control Controls up to 50 Discussion units 3-Band equaliser for better sound performance Audio...

Supplying, Installation, testing and commissioning of Chairman Unit Priority button for chairman microphone. Optional chime tone facility preceding chairman announcements. Moder...

Supplying, Installation, testing and commissioning of Deligates unit Compact, attractive design Built-in volume control for headphones Microphone with flexible stem and light ri...

Supplying, Installation, testing and commissioning of Mixer amplifier, 4-zone, 240W Class-D mixer amplifier, no active cooling 3 microphone inputs, one input switchable to line level with priori...

Supplying, Installation, testing and commissioning of 12W Cabinet Loudspeaker Good speech intelligibility and background music reproduction Available in black or white MDF construction

Supplying, installation, testing & commissioning of VC Communication cable and connectors

Supplying & Fixing of switch mounting rack with power manager & Cable manager as per standard specification (91/11.4) 12U with 600 mm depth ---- etc., Complete With all lead and lift and work to be e...

Supplying, installation, testing and commissioning of AmplifiersWide range of power amplifier 180W Multiple outputs - 70 V / 100 V and 8/4 ohm u Temperature controlled forced front to back ventila...

Supplying, installation, testing & commissioning of Matrix 4 in 1 out Hdmi Switcher

Supplying, installation, testing & commissioning of Hdmi Cabe 4k 10 mrts

Supplying, installation, testing & commissioning of Hdmi Cabe 4k 3 mrts

Supplying, installation, testing & commissioning of Cable Cubby with Male to Female Cables Default connnectivity :2 x Universal Power Socket, 2 x USB Charger, 2 x RJ45 Network, 1 x VGA, 1 x 3.5mm...

EXTERNAL ELECTRICAL WORKS (External Electrification, External CCTV System Works, Lighting Protection System, DG 250 kVA Works, LT UG Cable & Earthing Works and Street Light Works)

MATERIAL COST: TRANSFORMERS,HT CABLES & EARTHING SYSTEMS: 11 kV, Jointing & Cable Termination Kit as per IS-13573 Heat Shrinkable Outdoor Type Cable Termination XLPE Cable 3x95 Sqmm

Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975, 95 Sqmm, (54 GI Wires - 2.5 ...

DAS Specification Compact RMU (VCB/SF6 Type) as per IEC-62271 The DAS RMUs shall have the following in addition to the Standards: DC motors, Numerical Relays, Multi- functional meters, fault pass...

HT Metering Equipment 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Met...

Measuring Equipment HT 3 Phase 4 Wire Static Meter (CT, PT Operated) 3 x 63.5 V, 1 Amps 0.2s Accuracy Class with RS-485 & ABT features

CT PT Operated ETV Meter 0.2s Accuracy Class with

ABT feature and DLMS protocal with ToD with RS 232

Port BIDIRECTIONAL (Used for Boundary Metering)

Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014, 500 kVA, Aluminium Wdg, Star 2 (5 Star)

Transformer grounding GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg

Transformer grounding Rod Type

Grounding Material Pipe Grounding : GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

Good Quality Salt for grounding purposes packed in 50

Rod Earthing : Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as termi...

Bentonite clay slurry for earthing in 50 Kg Bag

Alkathine tube : Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr

Miscellaneous Materials Cable Covering Tile 125x250x40 mm

RCC Hume Pipe 2000 mm long 150 mm Dia

RCC Hume Pipe 2000 mm long 200 mm Dia

Collars for RCC Hume Pipe 150 mm Dia

Collars for RCC Hume Pipe 200 mm Dia

Route & Joint indicating slab with MS Anchor rod

Black Cambric tape 25 mm wide 10 mil thick and in rolls of 50 Mtr

Yellow Cambric tape 25 mm wide 7 mil thick and in rolls of 50 Mtr

Providing chain link fencing 50mm size of 8 guage properly stretched between rectangular poles and fixed with suitable bolts & nuts, the free ends shall be welded to the pole and block pipe at top and...

Spiral Earth Electrode

Caution/Danger Board

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm GI Plate

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper strip

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate

MISCELLANEOUS ITEMS Rubber mat 1100V grade ISI approved - 2 m x 1m x 10mm

Laminated Schematic with glass frame

As built drawings: Preparation and Submission of as built drawings of total work executed (5 Sets hard and 5 Sets soft copy.)

Heat shrinkable Type Terminations 3x95 to 3x150 Sqmm

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff, 3x95 to 150 Sqmm

Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from...

Erection of HT metering Cubicle on Platform.

Erection of 300 - 500 kVA Transformer

Transformer grounding GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg

Transformer grounding Rod Type

Digging of Pit for providing GI Pipe type Earthing Ordinary Soil

Digging of Pit for providing GI Pipe type Earthing Hard Soil

Spiral Earth Electrode

Caution/Danger Board

Super vision charges 10% of total HT Yard works

HT KVA Charges 1650/KVA (For 185 KVA Max Dimand)

Liasioning Charges

External CCTV System Supply, Installation, Testing & Commissioning of 4MP IP Dome /Bullet camera with 1 / 3.0 CMOS Image Sensor 2.7 mm13.5 mm, Motorized, F1.5 Lens 2688 x 1520 resolution0.005 Lux / F...

Supply, Installation & Commissioning of 4MP IP PTZ camera with 1 3 CMOS Sensor 30X Optical Zoom 16X Digital Zoom 120dB WDR Color 0.05 Lux at F1.6 0 Lux at F1.6 (IR on) IR Illumination focal length 4.5...

Supply, Installation & Commissioning of 8Channel NVR , 8Channels input,1 audio input, 1 audio output, 1HDMI, 1 VGA, Display Split 1/4/8, H.265/H.264/MJPEG/MPEG4, Resolution should supports up to 8MP, ...

4TB HDD (Surveillance or Enterprise Grade)

8x 100/1000 GbE Base-T 802.3at supported PoE+ Ports + 2 x 1GbE SFP Ports Managed Switch with Layer 2+ Image, 50 operating temperature support

Supplying & Fixing of sitch mountng rack with power manager & Cable manager. 9U with 450mm depth

Supplying & Fixing of Power strip

Supplying of shelf

Supplying & Fixing of Fan

Supplying & Fixing of patch panel for LAN cabling. 24 port 10/100/1000 patch panel

Supply & instalation of  4Port 10/100/1000 PoE+ ports with 60W power budget ,2SFP - GBIC ports

Supply & fixing of 1000BASE-SX SFP transceiver module

Supplying and drawing UTP-CAT 6E LAN cable

Supply and drawing 3C x 1 sqmm Armoured Power Cable

Supply & instalation of 6-core Outside Plant Cable - Corrugated Steel tape Armored,Loose-tube, Gel-filled, SM

Supply & Installation of Splicing Fiber Enclosure with Fiber Patch cord 1 Mtr

Supply & installation of IP67 encloser fixed on the pole with all accessories

Supply & instalation of Power Socket, MCB,Connecting Acessories for Pole

Supply & instalation of 4 Meter GI Pole & Mounting pole (100mm Dia with 5mm thickness) suitable base plate and 4Nos of.........long J bolts along with template and the pole shall be hot dip galva...

32MM dia 2.5mm thick

Lightning Protection System - (Euro System) ESE LIGHTNING ARRESTER Supply and installation of ESE lightning air

terminal with the below technical

Parameters. Stainless Steel material (304 L)

ESE LIGHTNING ARRESTER - MAST POLE ACCESSORIES Supply and installation of GI Mast Pole 5-meter length with below accessories GI Mast pole 5 meter -01 No GI Base Plate 1feetx1feet HDP Adaptor -01 No...

LIGHTNING ELECTRO MECHANICAL COUNTER Supply and installation of lightning event counter with the below technical parameters. * 6 digits Counter

* Non re-settable Electromechanical display

* IP 65 prot...

IP 65 TEST LINK BOX Supply and installation of Test link box with copper test link inside the IP 65 protected box

Supply and installation of 70 sqmm Single core

copper cable for down conductor

COPPER EARTH KITMAINTENANCE FREE ADVANCE EARTHING Supply of Maintenance free earthing system of 01 no of Copper Earth rod 17.2mm with flat terminal connection

EARTH ROD SPECIFICATION * Technology = Co...

DIESEL GENERATOR SET Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ I...

Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, a...

Supply and installation of Exhaust piping using 125MM dia of M.S. as per IS including hardwares like flanges, bends, bolts & Gaskets etc, for Connection of Exhaust Piping from DG set complete wit...

Supply and fixing of MS angle channel with anchor fasteners for supporting of exhaust / fuel piping with epoxy painting

Providing thermal cladding for 120 exhaust pipe by mineral wool wrapping with chicken mesh and Alu. sheet including bends.

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only). 19/20mm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5 sqmm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 4 sqmm

Approval charges from Electrical inspectorate

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . ...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm GI Plate

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper strip

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete. In soil (ordinary)

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete. In soil (hard)

Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.

Providing and laying in position 100mm dia stone ware pipe in existing trench.

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV. 100mm

Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, supe...

Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, supe...

8 SWG Copper wire.

LT. U.G. CABLES: Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip th...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in averag...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in averag...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in averag...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in averag...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in averag...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in averag...

Supplying and Laying Of 1C X 25Sqmm Cu. Fl. Cable

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT CABLE 2.5 to 25 Sqmm

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT CABLE 35 to 95 Sqmm

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT CABLE 120 to 240 Sqmm

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete. In soil (ordinary)

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete. In soil (hard)

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete. Cutting road surface

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete. C C. cutting

Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.

Providing and laying in position 100mm dia stone ware pipe in existing trench.

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (42/6.11). 19/20mm

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (42/6.11). 25mm dia

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (42/6.11). 32mm dia

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (42/6.11). 45mm dia

Supplying Bitumen Compound and covering the cable joint pot heads

Supplying Epoxy Resin and covering the cable Joint

Supply and wrapping the conductor with camabrick tape roll.

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 150x50mm

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 300x50mm

Heavy Duty Copper Terminal Long Barrel 35 Sqmm Copper Terminal, Apprx Wt: 17 Gm

Heavy Duty Copper Terminal Long Barrel 50 Sqmm Copper Terminal, Apprx Wt: 26 Gm

Heavy Duty Copper Terminal Long Barrel 70 Sqmm Copper Terminal, Apprx Wt: 38 Gm

Heavy Duty Copper Terminal Long Barrel 95 Sqmm Copper Terminal, Apprx Wt: 58 Gm

Heavy Duty Copper Terminal Long Barrel 120 Sqmm Copper Terminal, Apprx Wt: 64 Gm

Heavy Duty Copper Terminal Long Barrel 240 Sqmm Copper Terminal, Apprx Wt: 218 Gm

Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non- corrosive, thermally conductive, potential to permissible limits, superior...

Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non- corrosive, thermally conductive, potential to permissible limits, superior...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . ...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm GI Plate

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper strip

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8 SWG GI Wire

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8 SWG Copper wire.

EXTERNAL STREET LIGHTING:Fabricating, supplying and erection of ... ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door...

Supplying, and fixing of hot dip Galvanized M.S.Bracket suitable for out door liminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1000mm Standa...

LED STREET LIGHT Supply of LED street light with pressure die cast aluminium housing body with optimal heat sink for better thermal dissipation, Diffuser with injection moulded & is made of polycorbon...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over

existing pole / wall ceiling including clA, bolts, nuts and wiring

using suitable capacity wires.

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff ( BESCOM SR - 2021-2022 ). LT Cable 2.5 to 25 Sqmm

Supplying and drawing Flexible Multicore Cable manufactured

with electrolytic grade flexible copper with low conductor

confirming to IS 8130-1984 and (Virgin) PVC insulation

sheathed suitable for work...

Supplying and drawing Flexible Multicore Cable manufactured

with electrolytic grade flexible copper with low conductor

confirming to IS 8130-1984 and (Virgin) PVC insulation

sheathed suitable for work...

Supply and laying double walled corrugated (DWC) HDPE pipe inculding all necessary connecting sockets / couplings / Tees / bends / End-caps of same materials in existing trench as per is 14930 part-11...

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete. In soil (ordinary)

Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.

ELECTRICAL FIXTURES:Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffu...

LED Post Top Lantern Garden:Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare c...

Supply of LED Bollard light fitting of ...W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injectio...

Compound Wall & Gate

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all mate...

Providing and removing centering, shuttering, strutting, propping & removal of form work etc., for edges of slabs and breaks in floor including cost of all materials, labour complete as per specificat...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Ruled / Flush pointing on Sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 (One lime: 1.5 surkhi (50% red and 50% light yellow surkhi ) :1/2 marble dust). ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Providing and fixing M. S. Grill over Compound wall as per using 16mm x 16mm M. S. Square rod at 150mm c/c spacing and 6mm x 40mm M. S. flats at horizontal and 6mm x 12mm M. S. flat for ornmental d...

Providing and fixing M.S Gate as per Chief Architect Drawing, using 50mm X 50mm 14 guage M.S hollow pipe frame wprk bent to ornamental shape as shown in the drawing and 35mm X 6mm and 16mm X16mm squar...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

KSRRB M100-1 & M100-4.1. Conveying by Loading and unloading of moorum/debris. Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, including time for haula...

Sump Tank (50000 Ltrs Capacity) - 2 Nos

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings,balconies and likes, thickness upto 200 mm including cost of all materia...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation o...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

C.I Manhole cover with frame 610x455mm size.(38 Kgs)

STP 100 KLD Works

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings,balconies and likes, thickness upto 200 mm including cost of all materia...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceedi...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace /Chajjas/Sunken portion of WC:Bathroom, cold applied...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace /Chajjas/Sunken portion of WC:Bathroom, cold applied...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete.

Providing and fixing of Manhole covers with 600 x 600mm RCC cover with MS l angle frame of size 50 x 50 x 6mm thick.

KSRB 12-6.3 : Providing cast iron footrest and fixing in manhole with M 10 cement concrete block of 20x20x10 cms, using 20mm and down size metal of size including cost of materials, labour charges cur...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mount...

Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 m² and upto 16.80 m² in the area including cost of materials, labour, usage charges of...

Mechanical Equipment

Supply & delivery of mechanical fine bar screen0.6 x 0.7m, 10mm opening MOC: SS304

Supply & delivery of mechanically operated grit chamber with all accessories for the tank size of 0.6 m x 3.00m

Supplying, delivery of air blower with motos, acoustic enclosure with all accessories.

Capacity: 80m3 at 0.75Kg /cm2.

Make: A1 blowers with Kirloskar motor

Supply and delivery of submessible pump

cap: 18m3/hr at 7m head

Supply & delivery at site sludge collection pump

capacity: 15m3 at 7mtrs head

supply & devlivery of screw pump with motor capacity: 3m3/hr @5m head,

Supply & delivery at site centrifuge SS304 solid bowl type, cap = 10kg per batch

Supply & delivery at site polyelectrolite dosing tank agitators slow speed SS304 with motor,

Supply & delivery at site polyelectrolite dosing pump, mechanically actuated diaphragm type metering

Supply, delivery at site & installation of service water pump with 10m3/hr @25MWC, CI submerssible type

Supply, delivery at site , installation and commissioning ovear head HDPE 500 ltr capacity level controller

Supply, delivery at site , installation and commissioning of sumerssible pump, cap: 0.25m3/hr

For interconnecting pipings, valve, hose pipe and fittings

Supply & deliver at site air master/gurusons/ forbes marshal make glycerene filled stainless steel pressure gauge

Errection of electromechanical components

SBR Components: Control panel, electrical cable, connectors, tray, etc.,

Rainwater Harvesting pits & Chambers

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications,including setting out,shoring, strutting, barricading, caution lights, ...

Providing & filling boulders to required depth in pit including cost of all materials, labour with all lead & lifts etc., complete as per drawing and Technical Specification.

Providing & 40mm jelly to required depth in pit including cost of all materials, labour with all lead & lifts etc., complete as per drawing and Technical Specification.

Providing & filling 20mm jelly to required depth in pit including cost of all materials, labour with all lead & lifts etc., complete as per drawing and Technical Specification.

Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete.

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Borewell with Motor - 2 Nos

Geophysical investigation of site for sinking Borewell for supplying drinking water to Habitation either through the Handpump, MWS or PWSS by vertical sounding by adopting veener sounding by adopting ...

Yield Testing of Borewell at final depth with a minimum of 10 hrs continuously with the help of pump testing unit including the cost of transportation charges, and cost of consumables (P35, I N...

Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation...

Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation...

Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation...

Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation...

Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation...

Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation...

Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation...

Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe

grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and

latest ammendments, electrical resistance welded steel tubes,...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Supply of PPR Plain Union confirming to IS 15801-2008 and DIN Standards 8077/8092. PPR Plain Union 50mm

KSRB13-9 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure of outside diameter raising mains & exposed distribution pipes with special f...

KSRB13-1.1 : Providing and fixing to wall, ceiling and floor galvanised / mild steel tube nominal bore with fittings (medium grade weight 1.27 kg/mtr) B class including cost of all materials, labour c...

Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 50mm nominal bore including cost of ali materials, labour and HOM of equipments with all leads comp...

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.1x3x2.5 ...

INDOOR TYPE PANEL BOARD : Supplying of panel board units fabricated out of 2 mm thick sheet metal to operate on 3 Phase / 4 Wire 50 Hz / 400 / 440 Volts AC Supply - 6 to 10 HP 30 Amps etc., complete a...

Erection, electrification and commissioning works of pumpset including aligning and balancing with all necessary erection of materials and labour including supply and erection of two pair of supportin...

Erection of Panel board and meter board units with all necessary materials and labour including providing cement concrete foundation bed etc., complete for Indoor type etc., complete as per directions...

Supplying and fixing polished wood board made of not less than 15mm thick plank on both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered inverted wood...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Covered Parking for 4 Wheelers

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

Landscape & Plantation

Clearing and grubbing road land including uprooting rank

vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable...

Providing & laying Mexical grass/lawn , (including earth work, providing good earth ,farm yard manure, spreading etc. & maintaining the plants for one year complete)

Providing & fixing Modren concrete bench( 3 seater)

KSRRB M300-7.1. Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 m...

KSRRB M300-7.2. KSRRB M300-7.1. Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4....

KSRRB M300-9. Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfillin...

Transformer & DG Yard - Civil works

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 12.67.2 25mm dia heavy pip

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

Flag Pole - Civil Works

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Stairs (excluding landing) except spiral staircase including cost of all materials, labour complete...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joi...

Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyanceof all materials, labour for all items of work, HOM of equipment etc., complete as per specifica...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

KSRRB M100-1 & M100-4.1. Conveying by Loading and unloading of moorum/debris. Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, including time for haula...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating

each deposited layer by ramming and...

Providing and fixing M.S. Block pipe of 38mm dia, of heavy guage of 14 including removing the bends, cutting the pipe, and fixing pipe in between the existing two verticle poles (M.S. rectangular pole...

Security Room - 2 Nos

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all mate...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceedi...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings,balconies and likes, thickness upto 200 mm including cost of all materia...

Providing and removing centering, shuttering, strutting, propping & removal of form work etc., for edges of slabs and breaks in floor including cost of all materials, labour complete as per specificat...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Stairs (excluding landing) except spiral staircase including cost of all materials, labour complete...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

KSRB 15.8 : Providing and fixing suitable plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chip...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja with plastering ( labour charges only ) as per specifications. Specification No.

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after

watering with a lead upto 50 m, and lift upto 1.5...

Door Fixtures Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargeSS Handles 300mm

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS hinges 125 mm.

Providing and Fixing MS Hold fast

Magnetic catcher triple type.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 300mm.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm.

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all mate...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceedi...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Pump Room - 2 Nos

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all mate...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceedi...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings,balconies and likes, thickness upto 200 mm including cost of all materia...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja with plastering ( labour charges only ) as per specifications. Specification No.

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after

watering with a lead upto 50 m, and lift upto 1.5...

Door Fixtures Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargeSS Handles 300mm

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS hinges 125 mm.

Providing and Fixing MS Hold fast

Magnetic catcher triple type.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 300mm.

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm.

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all mate...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all mate...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceedi...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceedi...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings,balconies and likes, thickness upto 200 mm including cost of all materia...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings,balconies and likes, thickness upto 200 mm including cost of all materia...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...

Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyanceof all materials, labour for all items of work, HOM of equipment etc., complete as per specifica...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace /Chajjas/Sunken portion of WC:Bathroom, cold applied...

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped...

Estimate for Shifting of Existing 11 KV Line F-6 Basapur And F-1 Kamanur IP Feeder Passing over on District Court Kushtagi Road koppal in O&M II Section of Koppal Sub Division. ( Under Self Execution Work )

200004-PSC Pole-8.0M Long,200 kg WL

200105-RCC Pole-9.0M Long,145 kg WL

201050-Design ,Fabrication ,Galvansin

27901201-2 pin cross arm with pole clam

27901205-11 kV Horizontal cross arm wit

2791002-DP Structure with 9 Mtrs RCC P

279149-11kV G.O.S.Mounting H-Frame se

2811101-Guy with Complete set

2811103-Earthing Materials Type for gr

281674-G.I.Grounding pipe, B-Class, 4

281683-Spiral Earth Electrode

283006-33KV Pin Insulators (Shell Onl

283008-11kV, 5KN Composite/Polymeric

283018-DISC Insulators 90kN, Ball &

283320-Silcon rubber composite insula

283434-33kV Polymer Pin Insulator

284108-Rabbit ACSR Conductor

304212-11kV G.O.S 200A Single break

736002-Supply Of Galvanised Bolts & N

821939-Base Concreting 1:4:8, 500X650

821940-Base Concreting 1:2:4, 500X500

821941-Coping 1:2:4(as per actuals)

Assembling and errection of towers including tightening of bolts and nuts including loading,unloading at store and site (Including the Wt. of stubs)

Concreting for tower 1:1.5:3

Foundation of lattice tower construction of RCC footings/pedestals using M25 grade concrete and Fe550d steel

reinforcement including the cost of excavation, providing bed concrete (1:2:4) and backfil...

Foundation: M+6 Tower for Road Crossing

Engineering supply of all labours,

materials and construction of RCC Footings of any depth,

pedestals including the cost of Excavation, Concreting ,

Releasing Of Fixing of V-Shape/Horizontal cross arm including single top support Braces and Insulators fixing.

Releasing Of Ordinary Soil

Releasing Of Rabbit ACSR

Releasing Of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth

Rivetting of tower bolt ends by heating using dry- Acetylene gas and hammering to destroy threads so as to make the tower members theft - prrof (Bolts at nodal points only to be selected and rivetted ...

Setting up of stubs templates and from one location to another location

Sorting of tower parts made of fabricated angle iron

Same as above but erection of RCC/PCC/PSC poles of 7.5 to 8 mtr long in pit of 1.5 mtr depth.

Erection of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth

Fixing of 2 Pin cross arm with insulator and Braces fixing

Fixing of V-Shape/Horizontal cross arm including single top support Braces and Insulators fixing.

Same as above using RCC poles 9 mtr to 10 mtr long

Errection of H Frame.

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

Providing GI Pipe Earthing for lightning arresters Transformer Neutral and Transformer Metal parts (Excluding digging of pits)

providing spiral earth electrode type earthing along with pole (without charcoal, salt etc.,)

For Rabbit ACSR

Fixing of GOS including wiring (11kV SB 200A)

c) 8mtrs support (400x400x1680mm)

b) Pole based for 9mtrs square pole (650x650x150mm)

c) 8mtrs support (400x400x1680mm)

Area Specific - Kalyana Karnataka

Area Specific - GST

GST 18percentage For Labour

Supervision charges @ 5percentage

Government electrical Inspectorate charges as per Actuals

Estimate for Arranging Power Supply 350 KW HT Installation at District Cort Kushtagi Road koppal in O&M IV Section of Koppal Sub Division. ( Under Self Execution Work )

200120-Pre-Stressed Tubular Spun Pole

27901203-4 pin cross arm with pole clam

279013-11kV Special 3pin X arm - MS

2791002-DP Structure with 9 Mtrs RCC P

279149-11kV G.O.S.Mounting H-Frame se

2811101-Guy with Complete set

2811103-Earthing Materials Type for gr

281683-Spiral Earth Electrode

283006-33KV Pin Insulators (Shell Onl

283008-11kV, 5KN Composite/Polymeric

283018-DISC Insulators 90kN, Ball &

283056-33KV PIn Insulators (Pin Only)

283320-Silcon rubber composite insula

284108-Rabbit ACSR Conductor

287402-11kV 3 Core XLPE UG Cable-120

288304-3X240 Sq.mm (Heat Shrinkable o

288334- 3X240 Sq.mm (Heat Shrinkable

304212-11kV G.O.S 200A Single break

Releasing Of Fixing of 4 Pin cross arm with insulator and Braces fixing.

Releasing Of Fixing of V-Shape/Horizontal cross arm including single top support Braces and Insulators fixing.

Releasing Of Ordinary Soil

Releasing Of pole Upto 63 kVA with 9 mtrs. RCC pole

Releasing Of Rabbit ACSR

Releasing Of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth

Releasing Of Same as above using RCC poles 9 mtr to 10 mtr long

Releasing Of Stringing of conductor wren, squirrel, weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.

Erection of 11mtr long Concrete spun pole in a pit of 2.5 mtr depth.

Fixing of 4 Pin cross arm with insulator and Braces fixing.

Fixing of V-Shape/Horizontal cross arm including single top support Braces and Insulators fixing.

Same as above using RCC poles 9 mtr to 10 mtr long

Errection of H Frame.

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

Providing GI Pipe Earthing for lightning arresters Transformer Neutral and Transformer Metal parts (Excluding digging of pits)

providing spiral earth electrode type earthing along with pole (without charcoal, salt etc.,)

For Rabbit ACSR

Laying of cable for HT Cable 3x95 to 150 sq.mm

3x95 to 3x150 sq.mm

3x185 to 3x240 sq.mm

Fixing of GOS including wiring (11kV SB 200A)

2811103-Earthing Materials Type for gr

309218-11 KV, 350 MVA, 800A Outdoor T

321474-500 Kva,Aluminium wdg,star 2(5

358207-11 Kv Class HT Metering Cubica

358356-11kV HT Metering Panel 3 CT 3

821942-Fencing for DTC of 1 Nos inclu

Construction of platform (1.5x1.5x1.2) mtr in size stone, for erection of transformers/Heavy equipment including all materials

Providing GI Pipe Earthing for lightning arresters Transformer Neutral and Transformer Metal parts (Excluding digging of pits)

d) Erection of 300-500 kVA Transformer on Transformer structure.

Erection of HT metering Cubicle on Platform.

200105-RCC Pole-9.0M Long,145 kg WL

278911- Barbed wire (10 mts.)

27901201-2 pin cross arm with pole clam

27901203-4 pin cross arm with pole clam

2811101-Guy with Complete set

283003-1.1kV Pin Insulator (Shell on

283053-1.1kV Pin Insulator (G.I Pin

283158-NO.8 Strain Insulator

284108-Rabbit ACSR Conductor

289027-PVC Wire-25 Sq.mm

358078-SMC Street lighting metering B

778040-PVC Pipe-40 mm dia

Erection of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth

G.I. Barbed Wire (12 mtrs/1kg)

Fixing of 2 Pin cross arm with insulator and Braces fixing

Fixing of 4 Pin cross arm with insulator and Braces fixing.

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

For Rabbit ACSR

Surveying for construction of HT and LT Lines duly furnishing single line diagram indicating pole locations

GST 18percentage For Labour

Government electrical Inspectorate charges as per Actuals

Supervision charges@5percentage

Statutory charges as per actuals (Inspectorate charges, civic body charges etc.,)

Area Specific - Kalyana Karnataka

Area Specific - GST