ADDN/ALTN TO BLDG NO P-332, 333 AND SPL REPAIR TO TOILET BLOCK OF BLDG NO P-638 AND SPL REPAIR TO BLDG NO P-644 AT MIL STN SGNR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

M&L glazed ceramic coloured tiles grade, (300x600)x7mm thick as on vertical surfaces like dados or skirting over and including 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in epoxy groute mixed with pigment to match the shade of tiles complete all as specified and directed.

Demolition of cement concrete(un-renforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm laid in floor set and jointed in cement slurry including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & fair and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed.

M&L for vitrified double chargede/ultracharged ceremic tiles (squre / rectangular) area of each tile size (1200 x 600mm) exceeding 0.42 sqm but not exceeding 1.0 sqm in floors etc, set and jointed in neat cement slurry and pointed in epoxy groute to match the shade of tiles including 15mm thick screed bed or bedding layerin cement mortar 1:4 for laying floor finish complete all as specified and directed.

All as per Srl item No. 5.0 here in before on vertical surface/skirting, dados etc over and including 10mm rendering in CM 1:4 complete all as specified and directed.

M&L for 25 thick cement concrete flooring type B-0 1:2:4 (12.5 mm graded stone aggregate) complete all as specified and directed.

M&L machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick screed base in cement 1:4, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing, rounding of edges (moulding of edges) and polishing complete all as specified and directed.

All as per above item No. 8 aboive but on vertical surfaces like dados or skirting over but10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in epoxy groute with pigment to match the shade of tiles complete all as specified and directed.

Demolition of cement concrete of any description and in any position for sunken portion and floor all as specified and directed.

M&L for water proofing treatment to RCC sunken slab as specified below asd as directed by engr-in-charge:- (a) 15mm plaster in CM 1:3 with WPC on raised vertical surface. (B) Cleaning the surface with wire brush/coir brush, removing loose material like dust particles ,dirt etc. (c) Creating fillet covering of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surfaces. (e) Provision of glass fibre mesh of 2x2 mm immidiately on above coating (f) Apply second coat of two component modified polymer coating after 72 hours (g) Laying concrete 1:4:8 over the coating as per requirement (h) Joining the sanitary pipe with non shrink cementatiuos grout (k) Complete the treatment to be carried out by authorised applicator of waterproofing manufacturer. NOTE : (i) The Treatment shall be carried out as per the manufacturers industries and as directed (ii) The plan area of floor shall be consider for payment. (iii) WPC shall be measured and paid saperately.

Supply only Water proofing compound complete all as specified and directed.

Dismantling brick tiles or terracing tiles , single layer on roofs complete all as specified and directed.

Demolition of old mud phuska or over roof any type of soil and any thickness, removing rubbish of the premises cleaning surface and preparing to receive new cement plaster complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded aggregate) as in roof padding/mass concrete laid to maintain slope, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M & L for applying pitch free PU based Liquid applied single component elastomeric seamless, water and vapour proof membrane system for concrete @ 2.50kg/sqm (02 coats). Typical application will include roofs, podium, balcoies, floor slabs, suspended floors, patios, bathrooms, inspection pits, swimming pool, bridge decks, conforming tensile strength (2N/sqmm) (ASTM D412)/Tear resistance (15KN/m) (ASTM D624-00) and crack bridging (ASTM C 836/ASTM C 1305 modified) 2mm. After 72 hours of curing, flood test can be carried out to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barriers placed to contain the water complete all as specified and directed by Engr-in- charge. Make :- Equivalent of Fosroc /Sika/Bostik/Choksey etc. Note : All above operations to be done by auth application of manufactu8rers & as specified and directed. (ii) Auth application shall be approved by GE before exeution of work and accordingly contractor is required to submit requisite documents of applicator from manufacturer.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm) X 8-10mm thick with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed.

Dismantling water tank capacity exc 250 ltr and n exc 1000 ltr complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank white colour 1000 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 455gms) complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frames) not exceeding 1.5sqm each complete all as specified and directed.

S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing complete all as specified and directed.

S&F PVC door Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all all as specified and directed.

S&F Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge

S&F Aluminium window and ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium snap beading screws, powder coated aluminium fitting such as SS hinges type B-21 100 mm size (2 Nos for each shutter), suitable handle 150mm long (1 No for each shutter), tower bolt 150mm long(02 nos for each shutter) of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.

S&F Aluminum Grill powder coated of approved design/pattern with aperture size 50 mm and wire dia 3 to 4mm fixed with Aluminum Frame complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

M&L for mild steel work as in frame work/guard bar for door and window and as similar work including cutting tops to shape, drilling holes, notching for wire etc conforming to Fe-290 grade E-165 complete all as specified and directed .

Taking down chowkhats or frames (without taking off shutters from the frames) exceeding 1.5sqm but n.exc 4.0sqm each complete all as specified and directed.

S & F 1.25mm thick pressed steel door frames with one or more rebates including necessary fixing lugs, lock strike plate etc., size of frame 125x60mm complete all as specified and directed.

S & F 1.25mm thick pressed steel door frames with one or more rebates including necessary fixing lugs, lock strike plate etc., size of frame 105x60mm complete all as specified and directed.

M&L for cement concrete 1:2:4 type B–0(12.5 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint (ordinary tint) over one coat of red oxide primer on new steel surface over 10 cm width or girth, not otherwise described including preparation of surface complete all as specified and directed.

S & F 2nd class hardwood 35mm thick factory made gauged skelton shutters open rebated and prepared to receive gauze etc edges of framing plain, chamfered or rounded fitted with cut and mitred beady for receiving gauze etc of 3wood rail and style as specified in SSR Part-I Section 8, cluase 8.24(a) and all as specified and directed.

S & F 2nd class hardwood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.

M&L for preparation of surfaces of new wooden Surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F 100 mm Butt hinges stainless steel with galvanised mild steel hinge pin and fixed type C-21 all as specified and directecd.

S& F 100mm size aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified & directed.

S& F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified & directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.

S & F 150mm size aluminium handles D type with back plate, anodised, complete all as specified and directed.

S&F 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor and overall length of cover plate 140 mm complete all as specified and directed.

S&F in repairs chromium plated shower rose of any colour with or without swivel joints 150mm Square including shower arm complete all as specified & directed.

S&F in repair 15 mm dia chromium plated concealed type stop valves, cast copper aloy with crutch or butterfly handles screwed down high pressure, screwed both ends for iron and fixed complete all as specified and directed.

S&F in repairs, Angle valves, chromium plated cast screwed down, high pressure copper alloy, with crutch or butterfly handles, screwed both ends for but fancy type 15mm bore iron pipe or complete all as specified and directed.

S&F in repairs SS soap dish of any size fixed with screws complete all as specified and directed.

S&F in repairs grating doom 100 mm dia of stailess steel with and without hole complete all as specified and directed.

S & F in repair stainless steel tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed.

S & F in repair stainless steel towel ring min 150mm dia including brackets complete all as specified and directed.

S&F in repairs fancy type long body bib taps,15 mm cast copper alloy, with crutch or butterfly handles, screwed down, screwed for iron pipe or brass ferrule for 15mm bore complete all as specified and directed.

S&F bib taps,15 mm cast copper alloy, with crutch or butterfly handles, screwed down, screwed for iron pipe or brass ferrule for 15mm bore complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F 15mm Brass CP basin mixer for mixing hot and cold water screwed down for iron pipe and fied complete all as specified and directed.

S&F 5mm thick & 60cm long Glass Shelf fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F push type Metropole flush valve, made of brass with CP finishing suitable for 40mm CPVC pipe complete all as specified and directed.

S&F Vitreous china premium/1st quality wash down water closet wall hung EWC white (closed pattern incl all necessary like rag bolts/gel gasket, PVC (SWR) WC connector benty type etc.) Plastic water closet soft slim seat cover, white, closed pattern with flat bottom, and cover with aluminised hinging device, icluding taking down & remove to store old EWC complete all as specified and as directed.

S&F in repair water closet vitreous china squatting pan "Orrisa pattern" size 580mmx440mm white with integral foot rests (Excl flushing cistern) including all joints and making good to the floor complete all as specified including CI 'P' trap/S trap complete all as specified and directed.

S&F, in repair vitreous china oval type wash hand basin white, 32mm bore brass chromimum plated waste coupling & 32mm bore low density ployethylene (LDPE) flush pipe of pressure rating 6Kgf/Sq cm (1.00 M long) complete, including 15mm bore 450 mm length PVC connection with PTMT nuts complete all as specified and directed.

S&F in repairs, PVC low level flushing cistern 10 lirs capacity, valve-less, syphonic action type, white, with inlet, ball valve, float, and handle including brackets, PVC connections 15 mm size with PTMT nuts of length 450 mm ,including 32mm bore flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.

S&F, in repair vitreous china wash hand basin, white flat back of size 550mm x 400mm including brackets, 32mm bore brass chromimum plated waste coupling & 32mm bore low density ployethylene (LDPE) flush pipe of pressure rating 6Kgf/Sq cm (1.00 M long) complete, including 15mm bore 450 mm length PVC connection with PTMT nuts complete all as specified and directed.

S&F in repairs low density polyethylene pipes (LDPE) 32 mm dia and 1000 mm long of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed.

S&F hat pegs and hooks (cloth hanger with six peg set each) complete all as specified and directed.

Dismantling cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if required complete all as specified and directed.

S&F of 110mm PVC drain self it pipes, single sockets ISI marked in any length jointed with solvent cement fixed in walls and the dia of pipes complete all as specified and directed.

S&F of 75mm PVC drain self it pipes, single sockets ISI marked in any length jointed with solvent cement fixed in walls and the dia of pipes complete all as specified and directed.

S&F of 110mm PVC juction single 'Tee' ISI marked jointed with solvent cement fixed in walls and the dia of pipes complete all as specified and directed.

S&F of 75mm PVC juction single 'Tee' ISI marked jointed with solvent cement fixed in walls and the dia of pipes complete all as specified and directed.

S&F of 110mm PVC sockets equal ISI marked jointed with solvent cement fixed in walls and the dia of pipes complete all as specified and directed.

S&F of 75mm PVC sockets equal ISI marked jointed with solvent cement fixed in walls and the dia of pipes complete all as specified and directed.

S&F of 100mm PVC bend equal ISI marked jointed with solvent cement fixed in walls and the dia of pipes complete all as specified and directed.

S&F of 75mm PVC bend equal ISI marked jointed with solvent cement fixed in walls and the dia of pipes complete all as specified and directed.

S&F 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls ccomplete all as specified and directed.

S&F 100mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed.

S&F 100mm bore cast iron 'Y' tee sand cast fitted with oval access door complete all as specified and directed.

M&L for PVC floor trap 100 mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed.

M&L for PVC floor trap 75mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed.

S&F 20mm bore CPVC pipes ISI marked IS 157778 with all brass fitting for hot and cold water fixed with solvent cement complete to walls and ceiling or laid in floors all as specified and directed.

S&F 25mm bore CPVC pipes ISI marked IS 157778 with all brass fitting for hot and cold water fixed with solvent cement complete to walls and ceiling or laid in floors all as specified and directed.

S&F 40mm bore CPVC pipes ISI marked IS 157778 with all brass fitting for hot and cold water fixed with solvent cement complete to walls and ceiling or laid in floors all as specified and directed.

M&L for CI floor trap 100 mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for CI floor trap 75mm with anti cockroaches grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan – necks, etc. including cleaning of any description complete all as specified and directed.

M&L bands straps supports or stays for rainwater ventilating pipes including bolts confirming to Fe 290 Gde E-165 complete all as specified and directed.

S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

Taking up or down for 20mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed.

Taking up or down for 15 mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed.

Taking up or down for 25mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed.

S&F steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed.

S&F steel water tubing galvanised 20mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed.

S&F steel water tubing galvanised 25mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed.

S&F in repairs vitreous china urinals, half stall type flat back complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including waste pipe and trap complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing 15 mm dia pipe complete all as specified and directed.

M&L for granite (of any type) 18-20 mm thick machine cut, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, rounding of edges (moulding of edges) and polishing complete laid over 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed.

M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (40 mm graded aggregate) as in plinth protection laid in bay n.exc 2.5m length complete all as specified and directed.

Demolition of RCC as in Roofs, floors, parrapet walls ( other than ground floors), beams, staircases, landing, chajjas old RCC water Tank and similar suspended work complete all as specified and directed.

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

M&L brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed.

M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) complete all as specified and directed.

M&L for RCC nominal mix 1:1 1/2: 3 (using 20mm graded aggregate ) as in slabs suppotred on walls, beams and columns complete all as specified and directed.

S & F for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

Taking down cement plaster of amy description on bricks or concrete surfaces of walls including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified and directed.

M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note : Rate of WPC is deemed to be included in quoted rates)

M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces in two layers first layer 10mm thick and second layer 5mm thick with WPC 3% by wt of cement finished even & smooth without using extra cement complete all as specified and directed.

M&L 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces on patches finished even and smooth without using extra cement in patches complete all as specified and directed.

M&L for preparation of New Plastered Internal Wall surface complete applying the following :- (a) Applying wall care putty (1.00 mm thick) on wall surface and smoothening the surface with sand papes / Mechanised sanding etc prepatory to paint as complete all as specified and directed. (b) Applying Two coat of acrylic emulsion over a coat of primer by using brush / Roller over complete all as specified. Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-charge in case of places where using of Mechanical equipment are not possible.

M&L one coat of Acrylic emulsion on newly pastered ceiling surfaces over one wall care putty(1.0mm thick) including one coat of primer and preparation of surfaces complete all as specified and directed.

M&L for prepration of New external plastered wall surface complete all as specified and applying the following :- (a) Applying wall care putty (1.00mm thick) in two coats on wall surface and smoothning the surface with sand papers / Mechanised sanding etc prepatory to paint as complete all as specified. (b) Two coat of exterior acrylic emulsion by using Roller over and incl one coate of acrylic emulsion external primer complete all as specified.

M&L for complete remfoval of existing treatment on old internal wall surfaces of any description, preperation of surface by mechanised sander having suction vaccum bag using smart periodical methodology and after preparing the surfaces applying the following:- (a) Applying wall care putty in two coats 1.00 thick each for filling to depression of scraped surface/ nail holes/ light cracks etc and smoothenign the surface with sand papers / mechanised sanding etc prepatory to paint as directed. (b) Two coasts of acrylic emulsion of approved tint over a coat of primer on old prepared surface by using paint brush/Roller. Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approal of Engr-in-Charge in case of places where using of Mechanical equipment are not possible.

M&L two coat of acrylic emulsion on old decorated surfaces of ceiling including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed.

M & L for complete removal of existing treatment of wall surfaces and applying two coat of Premium Acrylic Smooth exterior paint (Apex) with one coat of primer on external surfaces of wall including one coat of wall care putty(1.0mm thick) as per manufacturers instruction complete all as per direction of Engineer in charge. (Note : Work will be carried out by mechanical means.)

M&L for complete removal of existing treatment including filling depression of scraped surface with wall putty two coats 1.5 mm thick each on Old external wall surfaces of any desciption , prepratio of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology , complete all as specified and applying the following :- (a) M&L two coats of exterior acylic emulsion by using Airless spray / Roller over and incl a coat of acrylic emulsion external primer complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of where using of Mechanical equiment are not posiible

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S & F for 15mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F for 20mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F for 25mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L Harrison rails mild steel chromium plated with fixing brackets, stops, roolers etc 20mm bore complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. In brick walls complete all as specified and directed.

S&F Brass CP Kitchen Mixer for mixing hot and cold water screwed down for iron pipe and fied complete all as specified and directed by Engineer - in - Charge. Make: Cat No T4635A1 of Claret Collection of Parryware or equvailent from other specified makes. complete all as specified and directed.

S&F in repair sinks bowl type, made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including 40mm dia CP Brass waste fitting amd waste pipe overall size of SS sink 495mm x 420mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and as directed.

S & F in repairs stainless steel Kitchen plate rack of overall minimum size 900mm x 750 mm x 250mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick sheet fixed with rawl plug and CP steel screws complete all as specified and as directed.

S& F 18 / 19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed with screws to timber frame work/steel frame work or ply wood as in cupboard shelves including 3 mm thick teak wood lapping on edge complete all as specified and as directed.

M&L for 0.90mm thick decorative laminates 'Mica type 1 of surface finished, colour and pattern as approved, fixed with adhesive as per makers instructions complete all as specified and as directed.

S&F plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd class hard wood complete all as specified and as directed.

S&F door viewer vide angle brass with glass cap 14 mm dia complete all as specified and as directed.

S&F 25 mm size magnetic catches with Plastic body and striking plate including letting in and fixed complete all as specified and as directed.

S&F continuous (piano) hinges 20mm & 12 MM width of flap, mild steel bright finish or electrogalvanised of complete all as specified fixed with CP steel screws.

S& F Auto Closing Concealed Hinges for Half Overlay Doors with 95 Degree Opening Angle complete all as specified and as directed.

Supply & fixing hasp and staple of size 75 mm aluminium anodized safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed.

M&L PCC 1:2:4 (40mm graded stone aggregate) type B2, in foundation of posts and struts complete all as specified and as directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S complete all as specified and as directed.

M&L mild steel work as in framed work i.e. Angle iron/flat iron including caps , bases, splices, all lattice bars, cutting tops to shape, drilling holes, notching for wire etc conforming to Fe-290 grade E-165 complete all as specified and as directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L two coats of synthetic enamel over a coat of red oxide primer exc 10 cm width /girth on new steel surfaces including preparation of surfaces complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal/ square nut not exceeding 5cm long complete all as specified and as directed.

S & F for Rolled mild steel in plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk) forming holes , without any attachment conforming to Fe-290 grade E-165 complete all as specified and as directed.

S&F Curtain Rod 25mm bore dia mild steel chromium plated with fixing brackets, stops/end knob, rollers etc complete all as specified and directed.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed.

M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for Sunken cast iron prossed steel terminal boxes suitably length and thickness for mounting switch, sockets, fan regulaor with 3mm thick plastic laminated sheet cover fixed with brass screwed and cup washer duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced.

All as per Srl item No 146 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed.

All as per Srl item No 146 here in before but for one three pin socket outlet 5 Amps on same board with other switches complete all as specified and directed.

All as per Srl item No 146 here in before but for one switch socket combination 6 pin 5/15 Amps on independed board with copper conductor 2.5 sqmm alongwith 2.5 sqmm earth contunity conductor complete all as specified and directed.

S&F switch piano flush type 5/6 Amp single pole one way, one module complete all as specified and directed.

S&F switch socket combinatin 5 pin, type 5/6 Amp flush type complete all as specified and directed.

S&F replacement switch socket combinatin 6 pin, type 5/16 Amp flush type complete all as specified and directed.

S&F socket outlet 5 pin 5 Amps flush type complete all as specified and directed.

S & F in replacement modular switch 5/6 Amps single pole one way, one module including modular cover plate with frame and metal flush box complete all as specified and directed.

S&F of module switch 1 way 16 A, 1 module complete all as specified and directed.

S&F of module socket, 6/16 Amps, 2/3 pin combined 2 module complete all as specified and directed.

S & F in replacement modular switch socket combination 5 pin, type 5/6 Amps 5 in 1 flush type with frame complete all as specified and directed.

S & F in replacement modular switch socket combination 6 pin, type 5/16 Amps flush type complete all as specified and directed.

S & F modular socket outlet 5 pin 5 Amps flush type complete all as specified and directed.

S & F in replacement industrial socket metal clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed.

S & F modular stepped type, fan regulator not less than 120 watt for ceiling fan 1200/1400 sweep complete all as specified and directed.

S & F ceiling rose surface bakelite three terminals complete all as specified and directed.

S & F in replacement of existing light fitting with LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC140-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed.

S&F in replacement of existing light fitting with LED batten W LED batten with 'Eye Soft' technology & glare free diffuser for perfect application in modern homes or aluminium housing and inetgrated electronic driver, 20 watt having input voltage AC 90-300V, 50Hz, 6500 K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2mm upto ceiling rose/connector complete all as specified and directed.

S&F in replacement of existing light fitting with LED lights fittings 1 x 20W, 220V, AC, 50HZ, 6500 K decorative box type aluminium housing with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2mm upto ceiling rose/connector complete all as specified and directed.

S&F in replacement compact and decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed.

S&F Decorative wall mounting, made of polycorbonate suitable for 9W led lamp, B22 base complete all as specified and directed.

S&F in replacement of security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed.

S & F in replacement angle holder insulated body with back plate for conduit fittings complete all as specified and directed.

S & F LED lamp 9W for angle holder complete all as specified and directed.

S&F in replacement Water tight bulk heaf fitting comprision of connector galvanised plastick back plate, weather proof enamelled gallery, glass well, and including 10 watt LED lamp complete all as specified and directed.

S&F in industrial socket metal clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed.

S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6.00 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in existing PVC conduict including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour, necessary junction box and covers including necessary connections, PVC flexible pipe are used in pannel board while connection the cable complete all specified and directed. (Note : PVC cable and PVC conduit shall be ISI marked) (Note : Four length of 6 sqmm cable and two length of 6 sqmm earth cable along with PVC conduit will be measured as one running length)

S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed wire multi stranded 4.00 sqmm copper conductor single core wire connected by common earth all as specified. Including 20mm dia concealed PVC conduitm, medium grade ISI makred complete all specified and directed. (Note : PVC cable and PVC conduit shall be ISI marked) (Note : Two length of 4 sqmm cable and One length of 4 sqmm earth cable along with PVC conduit will be measured as one running length)

S & F in replacement of sub-main wiring with PVC insulated and un-sheathed 2 x 6.00 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in and including PVC "medium quality" conduite as per required including 1 x 6sqmm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour, necessary junction box and covers including necessary connections, PVC flexible pipe are used in pannel board while connection the cable complete all specified and directed. (Note : PVC cable and PVC conduit shall be ISI marked) (Note : Four length of 6 sqmm cable and two length of 6 sqmm earth cable along with PVC conduit will be measured as one running length)

S & F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed.

S & F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed.

S & F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted TPN 4 ways, 415 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed.

S & F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted VTPN 4 ways, 415 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof, IP:43 protection suitable for incorporation FP MCCB (V-Tech) N3 Frame upto 125A, isolators and including give connection with wire and cable etc complete all as specified and directed.

S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 40 Amps, single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 6 to 32 Amps, single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S & F in repairs MCB ‘C’ series type suitable for 240 volts, AC supply 5 to 40Amps, single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S & F in repairs MCB ‘C’ series type suitable for 240 volts, AC supply 6 to 32 Amps, single pole (SP) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S & F in repairs MCB ‘C’ series type suitable for 240 volts, AC supply TPN 40Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S & F in repairs MCB ‘C’ series type suitable for 240 volts, AC supply SPN 40Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S & F in repairs MCB ‘C’ series type suitable for 240 volts, AC supply 32 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S & F in repairs MCCB 4 pole 63 Amps with breaking capacity 16 KA, Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed.

M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed.

S&F heavy duty metal body exhaust fan of 250mm sweep, 240 volt, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan includign grouting of bolts and making good to disturbed wall in CM (1:4) white washing matching with existing color all as specified and directed.

S&F heavy duty metal body exhaust fan of 300mm sweep, 240 volt, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan includign grouting of bolts and making good to disturbed wall in CM (1:4) white washing matching with existing color all as specified and directed.

S&F electric water heater, storage type plastic / plastic + sheet metal with glass coating SS tank and heating element upto 2 KW capacity 25 Liter BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables in soft/loose soil etc complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removal of Excavated material n exceeding 50 mtr and depositing where directed complete all as specified and directed.

Supply and filling in Sand for Cable protection complete all as specified and directed.

Supply and lay standard size bricks subclass B type complete all as specified and directed.

Supply and laying GI pipe 50 mm light grade for cable protection in walls trenches or any situation including clamp nut bolt etc complete all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed.

Supply, layying, jointing and testing and commissioning in replacement of 16 Sqmmx2 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed.

Supply, layying, jointing and testing and commissioning in replacement of 16 Sqmm x 4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed.

Supply, layying, jointing and testing and commissioning in replacement of 35 Sqmm x 3.5 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed.

S&F in replacement High power COB LED Focussed Light 15 Watt, Track light is a mehod of lighting where light fixtures are attached any where on a continuous trak rail wihich is elecrically charged as compared to the need of routing electrical wiring to individual light position complete all as specified and directed.

S&F in replacement supply and fixing post top lantern LED type 15W, 230 volts AC outdoor type, spun aluminium landscape luminaire with high power LEDs as light source, IP 65 protection with impact and corrosion resistanct complete with driver and lamp complete all as specified and directed.

Dismantling and depositing of old unsv ceiling fans of any size in MES yard complete all as specified and directed.

Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

Hanging only ceiling fan (M.D. supply) and connectiong up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

S&F ceiling fans AC single phase 230/240 V of size 1200mm sweep without regulator having Min aire delivery 210 CFM with service value 6.00 BEE 5 star rated with bushless direct current motor (BLDC) complete with electrical connection providing three core round flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Taking down and refixing of Exhaust fans after repairing of any size complete all as specified and directed.

S&F Taking down and refixing of geysers after repairing of any size complete all as specified and directed.

S&F Rigid non-metalic PVC conduit 20mm dia inclusie of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

S&F TV socket having holes for 20mm conduit entry for tv connection complete all as specified and directed.

S&F in replacement of meter box of size (0.45cmx0.45cmx0.25cm), thickness 2.25 mm double door, made of CRCA sheet single opening with lock arrangement, transperent glass for meter reading, suitable for fixing 01 Electric meter including taking down existing electric meters, refixing them with foru single core PVC copper unsheathed wire multistranded 4 sqmm properly painting on meter box complete and fixing in wall with suitable cutting, cement work etc complete all as specified and directed.

M/s Singla Trading Comapny (BID ID -3170819)

PAREEK AND COMPANY (BID ID -3169161)