SPECIAL REPAIR TO OR MD ACCN BLDG NO 31 NEAR IHC AND OTHER SANCTIONED WORKS AT AMRITSAR CANTT

Amount

B/R PORTION Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc

Dismantling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed

All as per Srl item No 3 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 2 shall be reused after necessary cleaning of mortar)

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement complete all as specified and directed

All as per Srl item No 5 above but in CM 1:6 but other than fair finishes.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed .

M&L for two coats of white wash on old/new plaster surface of ceiling including prepration of surface.

M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved over a coat of cement primer complete all as specified and directed.

All as per srl Item No 9 here-in-before but on old surfaces after complete removal of existing treatment on walls.

M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of oil bound distemper of shade as approved over a coat of primer complete all as specified and directed.

All as per srl Item No 11 here-in-before but on old surfaces after complete removal of existing treatment on walls.

M&L for two coats of whitewash on plaster surfaces of wall of old/new surfaces after complete removal of existing treatment on walls.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

All as per Srl item No 14 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed

Material and labour for Box type steel window made of ERW tube P-section of size 60mmX25mm double frame, comprises of glazed Skelton & gauzed shutter of ERW tube P-section size 50mmX20mm with one/two Nos openable leaf consisting of two nos sash bar of T-section 20mmX3mm welded to frame with one No vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixtures like Handle, Tower bolts, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD 1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1 complete all as specified and directed. (a)Hold fast,150mm long of 12mmX3mm MS flat-04Nos per window (b) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (c) MS Tower bolt 150mm long-02 Nos/leaf (d) Z Section stopper 20mmX25mm,100mm long -01 No per leaf (e) Cleat 55mm long of hollow square 15mmX12mm-02 Nos per leaf Note:- 1. Wire guage, Sheet glass, guard bar and painting shall be measured and paid separetely. 2. Mode of measurement for this item shall be for window portion only excluding ventilator portion where ever shown in drawing.

S&F MS box type window/ventilator fixed type with glazing bar without wire work and glass as per Drg No CE JZ-70/06-07 dated 07.06.07 with guard bar including priming coat complete all as specified and directed

S & F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specifica-tion & drawing.

S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges with primer complete all as specified and directed.

S&F IInd class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply on both faces. (The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated) complete all as specified and directed

S&F 25 mm thick flush shutter, soild core construction, with block board core and pluwood face panel commercial type on both sides complete all as specified.

S&F MS framed work as door, chowkhats, and grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing complete.

M&L two coats of synthetic enamel painting over one coat of red oxide on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces

All as per srl item No. 24 above but one coat on old painted surfaces.

M&L two coats of synthetic enamel painting over one coat of primer on wooden surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces.

All as per srl item No. 26 above but one coat on old painted surfaces.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face &2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing.

S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including wooden beading fixed nails including hacking at old glass complete all as specified and directed

All as per Srl item No 32 above but figured glass pin head type & glazing with oil putty

S&F 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast or ectruded sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as spd and directed.

S&F 150 mm long aluminum anodized barrel tower bolt of extruded section and fixed all as spd and directed.

S&F extruded Aluminium alloy handles fabricated type size 150mm.

S&F MS 300mm long ordinary rat tail stove enameled black door springs including rollers and roller plate Complete.

Supply only butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed

S&F 100mm long Hasp and staple , safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust , etc. and Brushing neat cement slurry with 3.0 Kg of cement per Sqm.

S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:4 & complete all as specified and directed.

All as per item No 42 but on vertical surfaces but on rendering 15mm thick in CM 1:4.

S&F glazed ceramic dark coloured tiles 300x450mmx6-7mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 15mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

S&F in repair vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110mm bore complete Make CERA/HINDWARE/PARRYWARE

Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket complete all as specified and directed

Supply only Flush pipe of polythylene of low or high density or PVC,32mm dia for low level cistern.

S&F in Repair vitreous China wash basin white,flat back size550x400mm including PTMT waste coupling 32mm bore,waste PVC pipe complete, Pillar Tap complete Make CERA/HINDWARE/PARRYWARE

S&F PVC connection 15mm size with PTMT nuts of length 600mm.

Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr and S&F rotational moulded polythene, triple layers white in color, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

Taking down or up steel tubing 15mm bore and connections and supplying, fixing and testing galvanised steel tubing 15mm bore “medium grade” with all fittings complete fixed to wall/ ceiling or laid in floors complete all as specified and directed

All as per Srl item No 51 above but 20mm bore of pipe

S&F in repair stop valves, 15mm bore cast copper alloy, screwed down chromium plated , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair for 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed

S&F in repair Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed, fancy type.

S&F in repairs SS curtain rod 25mm bore with fixing brackets stops rollers including fancy type SS knobs two Nos to each curtain rod.

S&F in repairs 100mm dia CP grating with or without hinge type or hole type complete all specified and directed.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories

S&F 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge Make:-supremo,Finolex,Jyoti.

All as per item No 60 but laid in trench or in floor

S&F 110mm bore PVC (SWR) bends any radius With access door

Dismantling Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed by Engr-in-Charge

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating complete all as specified and directed

M&L for applying evenly a tack coat of Industrial bitumen 85/25 at the rate of 1.2 Kg per sqm over 0.30 Kg/Sqm of bituminous primer on roof including cleaning of surfaces complete all as specified.

S&F (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in complete all as specified and directed.

M&L 40mm thick brick tiles laid on m ud mortar and jointed grouted, flush pointing in Cement Mortar (1:3) mixed with 5% crude oil over and including 80mm thick average consolidated thickness mud phuska on flat roof including 25mm thick mud plaster complete all as specified and directed

All as per item No 68 here-in-before but except brick tile

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate as in plinth protection finishing fair and even.

M&L for Chequred cement concrete tiles 30 cm x 30 cm x 25 mm thick set and jointed and pointed in neat cement slurry in floors with grey cement and no pigment over screed bed 15 mm thick in CM 1:6.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement morter 1:4 , all as specified and directed.

Demolition reinforced roofs, floors (other than ground floors), beams staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition)

M&L for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in chajjas, facia and the like complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and directed

S&F 75/110mm bore( SWR) vent cowl

M&L 110mm bore PVC (SWR) floor trap ,plain with grating including jointing with solvent cement

S&F in repairs CP shower 125mm fancy type with CP arm complete all as specified and directed.

M&L for machine cut green marble with granite polished top 16 to 18 mm thick over and incl 15mm thick cement screed in CM(1:6) laid and jointed in neat cement slurry with pigment to match the colour of stone on cooking platform, etc. including moulding the edges of stone ,grinding,polishing complete all as specified and directed.

S & F sink with drainage board made of stain less steel 1mm thick with plug washer and waste coupling, waste pipe including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowel size 410mm x 330mm x 160mm (Make NIRALI) complete.

S&F stainless steel plate rack size 75cm x 75cm made out of 1mm thick sheet wt. not less than 7.50 kg each fixed to wall complete all as specified and as directed.

S& F 18 mm thick PVC board as in shelves for kitchen cabinets etc all as specified.. Make Rajshri/ Sintex

S& F 5 mm thick PVC board as in back side of for kitchen cabinets etc all as specified.. Make Rajshri/Sintex

S& F 18 mm thick PVC shutters one side prelaminated of any shade for kitchen cabinets etc all as specified.. Make Rajshri/Sintexx

S& F 40mm long self closing type hydraulic steel hinges complete all as specified

S&F 75 to 80 mm long stainless steel handle complete all specified.

M&L for 75mm thick Cement concrete type D-2 , 1:4:8 (40 mm graded aggregate) as in sub base of floor.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.

M&L for Hardcore of broken bricks gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface.

M&L for Machine pressed precast concrete interlocking paver block any shape and sze confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment.

M&L for 25 mm Sand filling under floors or in foundations including watering and consolidation

Excavating in post holes( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watring, and removing surplus soil to a distance n.exc 50 m and making good surface

M&L for PCC 1:3:6 Type C-1 Cement concrete in foundations, filling and mass concrete

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Fixing only chain link fencing including line wires, any mesh , size and type to any type of standards , rails , straining bolts, etc. including provision of binding wire

Supply of chain link MS galavanised fencing any size or type weight less than 4 Kg/Sqm complete all as specified and directed

S&F mild steel flat iron work,, fencing rod weeping in fencing mesh including drilling holes, notching screws all as specified and directed

S&F Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut , exc 10 but n exc 15cm long

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Hard / Dense soil complete all as specified and as directed.

M&L Damp proof course 40mm thick in cement concrete 1:2:4 Type B-0 (Using 12.5mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified.

M&L RCC 1:2:4 (Nominal Mix) using 20 mm graded stone aggregates as in beams,lintels.

M&L RCC 1:2:4 (Nominal Mix) using 20 mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Fair finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc.

Fair finished flat form works to soffits of suspended slabs such as roof slabs, floor slabs, landings,chajjas and similar work; not exceeding 200mm thick (Horizontal or sloping)

S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified

S & F powder coated Anodised Aluminium window and ventilator shutters, side hung up without sach bars, aluminium sections weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing anodised snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 Nos), hinges type B-21 100 mm long (02 Nos) suitable handle (01 Nos) complete all as specified

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exc 0.5 sqm in each pane complete all as specified and directed.

M & L for returning, filling in, incuding spreading, levelling, watering and well ramming in layers n exc 25 cm

Formwork to sides of fair finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M&L RCC 1:2:4 (Nominal mix) using 20 mm graded stone aggregates as in column footings, plinth beams

Supply and fixing light shade vitrified ceramic tiles 10mm thick ( square/ rectangular )polished, area of each tiles not exceeding 0.36 sqm as in floor set jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including15mm thick bedding layer in cement mortar 1:6 complete all as specified

All as item No 117 above but on vertical surface as in dado/skirting , step, risers, treads etc over and including 10 mm thick bedding layer in cement mortar 1:4

Material and Labour for preparation of new plastered surfaces and applying 2 mm thick cement based wall care putty on wall.

Supply and fixing aluminium door closer hydraulically regulated designation No 3 universal type suitable for door shutter of 861 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.Make:- SANDHU/ EVEREST

Supplying and fixing 150 mm size brass handles, cast type polished bright complete all as specified.

S & F brass mortice lock, 4 levers, vertical type of size 100 mm

S&F GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixe to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre.

Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified.

M&L Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions and preparing seamless face by putty.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing comple pointed in white or coloured cement to match over and including screed bed 15 mm thick in CM (1:4) all as specified.

M&L for machine cut kota stone slab skirting / dado 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completings in dado/skirting set and jointed in neat cement slury and pointed in coloured cement to match over and including 10mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

M&L for PCC 1:3:6 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed

S & F frame work such as grills/guard bars grating etc with ends of bars complete all as specified and directed.

S & F for structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy bracket framing , (Beam, Tee, angle, channel or flat sections) including distance pieces, cleats etc of Gde Fe-410 W (Gde-E-250) quality B

M & L for PCC type B-0, 1:2:4, (using 12.5 mm graded aggregate) as in copings, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating as directed

S&F in repair vitreous china wash down water closet wall mounted patern including vitreous china low level flushing cistern, (coupled type) including trap set, seat cover and conection to trap, flushing pipe, etc. complete including making good to floor fixing bolt all as specified and directed. (Make Cera, Jonson, Parry Ware)

S&F vitreous wash hand basin of size 550 x 400 with pedesatal pattern Oval type incl waste coupling,PVC waste pipe, china & porcelain stopper incl MS brackets complete all as specified and directed.

M & L for 100 mm dia cast iron floor trap with CP grating with hole including jointing to waste pipe fixed in cement concrete B-1 (1:2:4) using 20 mm graded stone aggregate complete all as specified and directed.

S&F sand cast iron soil waste pipes 75/100mm dia in any length with or without ears with cement joints laid in trenches or in floor all as spd & directed.

S& F 15MM Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S & F galvanised iron tubing, 15 mm bore medium graded, including all fitting and fixedcomplete concealed or exposed to walls or ceiling or laid in floors complete all as specified and directed.

All as per srl no. 137 but 20 mm bore.

M & L RCC class NP3 150mm diameter pipes laid on 150mm thick PCC bed (PCC 1:4:8) with excavation in any type of soil, in any type of soil, including manholes/drop manhole of standard size made of brick masnory/RCC/Precast RCC with SFRC ventilating cover and frame, including all items and activities to execute and make sewer line functional

M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete , using extra cement, including forms, moulds, mitred / stopped ends etc

M& L for providing precast cement concrete work Type B1, 1:2:4 (20 mm graded aggregate) in cover slab, for manholes, area drain etc, and similar articles with plain faces and set in CM 1:4 complete

M & L for cement concrete type C2 1:3:6 (40 mm graded aggregate) in surface channels and drains

M&L for cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) in benching to drain bottom

M & L for brickwork with sub class "B" bricks, laid on edges in floors bedded and jointed in CM 1:6 and pointed in CM 1:3.

E/M PORTION M & L Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded with FRLS copper conductors conforming to IS specifications, drawn through and including conceled conduit concealed/ fixed on wall / ceiling with suitable clamps, screws, etc or concealed in wall including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded FRLS copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-Make of wire :- Finolex /Polycab/RR Kabel

As per srl no 145 One socket outet point 5 amps on the same board.

As per srl no 145 One 3 pin 5 amps switch socket on independent board.

All as per item No 145 herein before but with cable 2.5 sqmm (nominal area) multistranded copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continous earth wirte PVC insulated 1.5 sqmm copper multistranded conductor connecting to common earth and earth dolly complete all as specified and directed Note for items Nos 2&3 :- (a) The wiring shall be done in proper colour coding using red,yellow and blue for phase,black for neutral and green for earth leads.

Supply and fix switch piano one way 5 A, SP, 230 Volts.Make Anchor/SSK/Plaza

Supply and fix Socket outlet 2 in 1, 3 pin 5 Amps Flush type. Make Anchor/SSK/Plaza

Supply and fix Switch outlet 2 in 1, 3 pin15 Amps Flush type. Make Anchor/SSK/Plaza

Supply and fix stepped type electronic fan regulator flush type all as specified and directed. Make Anchor/SSK/Plaza

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant/batten fittings complete all as specified and directed

Supply and fix wall/ceing mounting LED 18 Watt PC Diffuser tube light fitting complet with all aceesories 1x18W LED suitable for domestic application 240Volts 50HZ including one tube rode and internally pre-wired with 1.5 sqmm twin twisted flexible copper conductor and complete . Make Philips/Wipro/CG

S&F energy saving new generation 10 watt LED, 6000k bulk head luminaire with opal diffuser light fitting complete with all acessories and connection complete. Make Philips/Wipro/CG

S&F Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s etc complete all as specified. (Note : cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) Make Schneider/Legrand/Siemens

S&F MCCB Incomer distribution board double door vertical type made out of CRCA MS sheet surface with insulated material like polyester or with epoxy powder coating surface mounting TPN 4 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and IP 43 - IK 09 protection with and incl 100 amp 36 kA 4 pole MCCB with thermal - magnetic setting and Icu = Ics = 100%(Note : The cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) Make Legrand/Schnieder/Hagar

S & F in repair MCB double pole, 240 volts, 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make Schneider/Legrand/Siemens

S & F single pole and neutral enclosure 32 A ,230 V with a two pin and earth plug and socket complete with one double pole MCB 32A compl;ete all as specified and directed. Make Legrand/Siemens/Schiender.

Supply and fixing MCB 32 Amp TPN 415 volt AC supply rupturing capacity not less than 10 KA complete all as specified and directed by Engineer-in-Charge.Make: C&S/Legrand/Schneider.

S & F in repair MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make Schneider/Legrand/Siemens

S & F sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 ampere rated bus bar, 240 volts fixed sunk / flush to the wall or niche complete all as specified and directed. Make : Legrand/Schneider/Hagar

Material and labour service connection PVC cable 10 Sqmm 2 Core incl GI wire and PVC conduit for fixing in wall /pole incl connection completed all specified and directed.

Supply, installation, testing and commissioning of Air Conditioner, Hot and Cold Split type, (Indoor, outdoor unit), single phase, rotary compresser and condenser coil of copper having cooling capacity 4500 K Cal per hour (1.5 ton), BEE rating 3 star or above refregirent type R410A/R32 with cordless remote control unit complete all as specified and directed. Make - Voltas; Smsung, LG(LS-H18VNXD)

Supply, Installation & testing of voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 150V to 285V with output voltage stabilized at 230V with accuracy of + 2.5% with time delay system and of caapcity 4KVA complete all asspecified. Make Voltas, V-Guard ( VND 500 ), Microtek

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded FRLS copper conductor cable conforming to IS specifications, 2 runs of 4 sqmm including 1 run of 2.5 sq mm single core multistranded copper conductor, PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed including taking down all sub main wiring . Make of FRLS wire; Polycab/Havells/RR Cable,Make of PVC Pipe - Polycab/FInolex/Kalinga premium. Note : 2 Run of 4 sqmm, Run of 2.5 sq mm and 1 run of PVC conduit will be mesuared as 1 unit.

Supply and fix 1200mm sweep complete with down rod and electronic type regulator incl fitting and fixer as per site riqurement and cmplt accessories to 230 volts single phase 50 hz ac supply and connection up with incl two core PVC sheathed copper conductor all as specified and directed. BEE 5 star Rated. Make Havells/Khaitan/CG

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm dia complete all as specified and directed. Make: JINDAL/TATA/PRAKASH

Supply and fixing of Gun-metal, globe or gate valves of size 25 mm dia , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M/L for road cutting, including excavation returning filling in, spreading leveling, well ramming in layers, soiling with broken boudders/ stones, WBM 7.5 cm thick coarse aggregate received from dismentling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled & compacted for road patch repair work.

M&L for Sand cushioning to UG cable above and below the cable in trenches/ducts complete all as specified and directed by Engineer-in-Charge. Note:- Thickness after punning down shall only be measured.

M&L for one layer of brick class ‘B’ laid flat across the cable for protection cover on the top of the sand cushioning complete all as specifiedand directed by Engineer-in-Charge.

M&L for 50mm full circle fountain using GI pipe 50mm size including 1/8" steel nozzles 20 in number with overall dia of the circle as 3 mtr , complete assembly all as directed and specified

S&F submersible 36 LED RGB spot light for underwater pool pond fountain outdoor landsczpe waterproof spot lamp 3.5 US plug

S&F non clog open well horizontal type submersible motor pump set suitable for 415 V TPN System Capacity 1.5 HP with 3 mtr cable make Kirloskar/KSB/Crompton Greaves

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 16 sqmm 4 core with cable gland complete all as specified and directed by Engineer-in-Charge. Make: Havells/Polycab/RR Kabel

M&L for earthing complete with galvanised steel earth plate electrode 600mmx600mmx6 mm thick burried in ground vertically to a depth not less than 2.25 meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15 cm thick layers of common salt and charcoal dust starting FRLSom ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth lead of size 4 mm by means of galvnised nuts, bolts and washers. GI wire of 4 mm dia laid in 15 mm dia light grade GI pipe as protection FRLSom top of the plate up to test point (cost of protection pipe up to 7.5 meters FRLSom earth electrode will be included in the rates quoted by the contractor (b) Watering pipe GI light grade 20mm dia FRLSom top of the earth electrode up to MS funnel with brass wire mesh embeded in floor of PCC earth pit. (GI watering pipe should properly tightned on GI plate & Funnel and embeded in PCC floor of earth pit) (c) PCC earth pit 30cmx30cmx30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 1 Nos MS handles suitable for carrying of pit cover. (d) Angle Iron FRLSame Made of 40x40x4 mm size angle iron for holding earth pit cover. Note :- The cost of excavation, earth work, watering pipe, metal test point, MS funnel with brass wire mesh and RCC pit with pit cover have already been included in the rates. No extra cost shall be paid to the contractor against these items.

S&F DOL Motor starter panel for 1.5 HP ,415 Volt motor complete all as specified and directed.

Material and labour for Submersible cable 2.5 sqmm 3 core copper conductor to run from starter to motor (cable chall run through flexible conduit in exposed area) including provision of water proof/tight jointing with submersible motor complete all as specified and directed

S & F Socket 16 Amp multipurpose shutter type fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring). Make: Havells/Cona/Anchor

S&F bell push, flush type, single pole 5 amps complete all as specified and directed. Make: Havells/Cona/Anchor

S & F Ceiling rose, surface bakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thick bakelite, laminated hylem sheet of appropriate size & MS box of suitable size and making good surface as original by plastering and whitewash/colour/distemper etc complete all as specified. Make: Havells/Cona/Anchor

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole fixed over and including pressed steel sunk box of size 175 X 100 mm duly covered with 3 mm thick bakelite sheet complete all as specified and directed.Make: Havells/Cona/Anchor

S & F GI pipe light grade 50 mm bore for cable protaction fixed to pole/along wall/ under road/across nallah or drain inclusive of all fittings such as tees bends, elbows, reducer, bell mouth tube ends and all fixing accessories such as couplers hook, nuts, saddlers, pipe hook etc complete all as specified and directed.

Supply and fixing wall mounted LED batten extruded aluminium heat sink provided for efficient heat dissipation and intigrated electronic 12 watt LED 6000K (2 ft.) and making all electric connections complete all as specified and directed .Make :Havells/Bajaj/Philips

Taking down old unserviceable point wiring FRLSom existing conduit (light, fan, socket or power point etc) complete such as switches, ceiling rose, pendent, regulator and socket etc and removing the material FRLSom site and making good the disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, whitewash/colour/distemper etc complete all as complete all as specified and directed.

M & L for sub main wiring with 1100 volt grade two single core PVC insulated and unsheathed cable with stranded copper conductor 6 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 4 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed. Make of FRLS Wire Finolex/RR Kabel/Polycab

ESS KAY BUILDER

Ghuman Builders

m/s inder construction co

m/s. gopal krishan

Harai Sharan Govt Contractor