15th Finance Commission 2024-2025 (Tied Grant First Installment) in Vadakku Valliyur Special Grade Town Panchayat

Amount

Earth work excavation for foundation in all type of soils as may be directed except in hard rock requiring blasting and also including refilling the sides of foundations with excavated soil in layers of 15cm thick well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead of 10m and lift of 2mts. for ordinary soil, cost including all costs etc., complete as per standard specification.

Collection, supply and filling with well gravel sand in foundations, pavement and basement, in layer of not more than 15cm thick, well ramming and consolidating etc., complete, cost including all costs etc., complete as per standard specification.

Plain cement concrete of mix 1:4:8 (one cement four M-sand eight course agreegate using hard broken granite stone jelly of 40mm gauge for foundation levelling course including shuttering dewatering wherever necessary and laid in layers of not more than 15cm thick etc., complete cost including all costs etc., complete as per standard specification.

Supplying, fabrication and placing in position mild steel or deformed steel bars for all reinforced cement concrete terms of steel transporting straightening, cutting, bending, cranking, binding, welding, etc., including cost of binding wire M.S. chairs laps to fix the reinforcement in all positions, all labour and materials etc., complete cost including all costs etc., complete as per standard specification.

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.

Supplying and erecting centering for sides and soffits including support and strutting upto 1.00 m high for plain surface with all cross bracing using mild steelsheet of 90cm X 60cm and stiffened with welded mild steel angle of size 25mm X 25mm X 3mm for boarding laid over silver oak ( country wood) joists of size 10cm X 6.5cm cost including all costs etc., complete as per standard specification. 1. Basement

2. Column

3. Roof and Column

Random Rubble Masonry using CM 1:5 (One part of cement & five parts of sand) mix using rough stones and bond stones for foundation and basement and including pointing above G.L including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing the concrete etc., complete as per standard specifications and as directed by departmental Engineers.TNBP No:35H

Brick work in cement mortar 1:5 (one cement, five M-sand) using III class country bricks of size 0'- 8 3/4" x 0'-4 1/4" x0' 2 3/4" from approved kiln with best quality and strength including all cost and conveyance of all materials and labour charges and all other costs etc., complete as per standard specification. 1. Upto Basement

2.Above Basement

Special ceiling plastering and finishing the exposed surfaces of all RCC items of works with cement mortar 1:3 (One cement and three sand) of 10 mm thick including hacking the surface and providing necessary cement mortar nosing, beading as per size and specification wherever necessary using the same mix in all floors etc., cost including all cost and conveyance of all materials to site, labour charges and other incidental charges etc., complete complying with std specification.

Plastering in cement mortar 1:5 mix (one Cement and five sand) of 12 mm thick etc., cost including all cost and conveyance of all materials to site, labour charges and other incidental charges etc., complete complying with std specification.

Weathering course concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) over the RCC roof slab in the propotion of brick jelly to lime being 32:121/2 by volume and laid over in a single layer and consolidated to the required design and finished thickness , beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wetted by sprinkling lime jaggery water as per standard specification,etc.complete as directed by the departmental officers.TNBP No:44-I

Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Supplying and fixing M.S Grill to doors, special windows and ventilators etc using 20mmx6mm as directed by the departmental officers inclusive of cost of MS grill including one primer coat of red oxide and fixing in position etc. including cost and conveyance of all materials and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers.(as per the schedule of rate)TNBP No:86 & 86-A

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections.Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wallusing self expanding nylon plug and driving ms electroplated screws into plug.

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 16 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.as per (SD 38)

Supplying, laying and jointing PVC pipes and GI specials as follows (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. 1.110mm PVC pipe

2. 110mm PVC Elbow

3. 110mm PVC Tee

4. 32mm PVC Pipe

5. 32mm PVC coupling

6. 32mm PVC Elbow

7. 25mm PVC Pipe 10kg

8. 25mm PVC Elbow

9. 25mm x 20mm PVC Reducer

10. 20mm PVC Pipe

11. 20mm PVC Elbow

12. 15mm dia brass CP screw down tap

Supply and delivery and fixing of 2000 lit HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Painting Two coats with approved plastic emulsion paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete.

Painting new iron works with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in all floor etc., complete as per standard specification.

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains, cost including all costs etc,., complete as per standard specification. SD 65

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator) etc., complete cost including all costs etc., complete as per standard specification. (SD-23)

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL.(SD 83)

Supply and fixing of single box type 4’40 w fluorescent fitting complete with copper choke and condenser with TW Round on wall and with tube with PVC unsheathed leads from tennauble to the nitting SD 88 ISI make with standard specification.

Drilling of 150mm deepborewell in hard rock area any reuired depth in officials inlcuding cost and conveyance and all labour charges thereforeetc completd

Supply and fixing 160mm dia PVC 6kg/cm2 casingpipe including cost and conveyance including erection charges etc completed

Supply and fixing of 50lpmx60m submersible motor including cost and conveyance and all labour charges etc completed

Supply and delivery of Panel Board including all cost and conveyance etc., complete.

Labour charges for Erection of Submersible motor including all costand conveyance etc., complete.

VELMURUGAN (BID ID -1229199)