PROVN OF CERTAIN WORKS TO ENHANCE SECURITY, PROVN OF CHAIN LINK FENCING AT ARMOURY AND DEPOSITION WORK PROVN OF CERTAIN WORKS NEAR RADAR AT N 1 SITE AT AF STN RAJOKRI UNDER GE (AF) GURGAON

Amount

Excavating in trenches, n.exc 1.5 mtr wide and n.exc.1.5 mtr in depth, for foundation etc or for shaft, wells, cesspits, manholes, pier holes, etc n.exc. 10 Sqm on plan and n.exc. 1.5 m in depth and getting out in Hard/dense soil complete all as specified and directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers of n.exc. 25 cm thick with available and approved soil/ earth complete all as specified and directed

Removing of surplus excavated soil n.exc. distance and depositing where directed by Engr-in-Charge at level exc. 250 m but n exc. 500 m above starting point complete all specified.

M & L Cement concrete type D2 1:4:8 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified & and as directed

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) complete all as specified & as directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping , kerb, benching, gola and similar items all as specified and as directed

M&L 15mm thick plastering in CM 1:4 on brick or concrete surfaces and finishing the surfaces even and fair without using extra cement complete all as specified

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of suitable primer on walls. complete all as specified and directed.

Surface Excavation in any type of soil n exc 30 cm deep and averaging 15 cm deep and getting out any type of soil complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooring etc complete all as specified and as directed

M & L Hardcore of broken stone or boulders gauge n exc 63 mm, deposited, spread and levelled in layers n. exc 15 cm thick,watered and rammed to a true surface complete all as specifed

M&L for Providing 100 mm thick PCC (cement concrete) 1:2:4, type B-2 (using 40 mm graded aggregates) as in hardstanding/ ramp /path etc Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green Complete all as specified and directed

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

M&L prepration of new Steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified

M&L PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in boundry pillar and posts etc. finished even and smooth using extra cement complete all as specified and directed.

S & F Plates ( plain or chequered square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

S & F Pre -Painting galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ clading to wall fixed with self tapping screws complete all as specified

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work etc complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh,size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and directed

Supply only Chain link MS galvanisd fencing 4 mm dia , size 100 mm x 100 mm mesh complete all as specified and directed

S&F Mild steel bolts, screwed one end,with hexagonal or square nuts and washers, the other end Exc 5 cm and n.exc 10cm long and Diameter of neck in 12 mm complete all as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc comlete all as specified and as directed.

M & L Chimney bars (staight or chamber) bearing bar, tongues, guard bars, plain, let in and fixed independently in steel frames, L or T section for supports of cantilever post and similar articles confirming to Fe-290 Gde E-165 complete all as specifed and as directed

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters; walk ways, railings, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F re-inforced punched concertina coil of 600mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/clips for tying at crossing etc complete all as specified and as directed.

Dismantling wrought iron or steel work of any description not otherwise provided for complete all as spd.

Taking down barbed wire fencing of any description and in any position fixed to RCC/steel posts complete all as specified and as directed by Engr-in-Charge (each row shall be measured separately)

S&F Mild steel bolts, screwed one end,with hexagonal or square nuts and washers, the other end Exc 10 cm and n.exc 15 cm long and Diameter of neck in 16 to 20 mm complete all as specified and directed.

M & L for Mild steel plain black sheet 1.25mm thick in wall cladding , steel gates/doors and similar work , cut to size , holes punched including round headed screws , clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams , including bending or turning up , mitred angles etc as required all as specified and as directed .

S&F powder coated anodized aluminum frame for partiton, doors, windows ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F powder coated anodized aluminum door shutters, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door,100 mm long hinges (3 Nos), 01 Nos Al Tower Bolts 200 mm long,anodized aluminum snap beading screws etc. complete all as specified.

S & F powder coated Anodised aluminium window and ventilator shutters side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining, cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100 mm long (2 nos) suitable handle 1 No Tower bolt 100 mm 1 No complete all as specified

M&L for 5.00 mm thick sheet glass ordinary quality and glazing each pane fixed with including neopune rubber gasket in aluminium frame work complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheet, cast oe extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

S & F 9 mm thick prelaminated particle board exterior grade in bottom panel of Aluminium door including rubber gasket, aluminium glazing clips complete all as specified and directed

S&F fabricated anodized aluminium grill of size 75x100mm, using 5mm dia bars fixed to frames using U/V section runners complete all as specified and as directed

S & F Cast iron body door closer hydraulically regulated, designation No .1 universal type suitable for door shutters upto 851 to 1000 mm in width and of weight 35 kg complete all as specified

M&L for machine presssd pre-cast coloured concrete interlocking paver block any shape confirming to IS-15658-2006 of 60mm thick , M-35 Grade with grey cement and pigment as approved by GE, laid over and including 25 mm thick sand cushioning etc as complete etc complete all as specified and as directed

M&L for wiring with two run single core PVC insulated, stranded, PVC sheathed copper cable conductor size 1.5 Sqmm x 3 core and drawing through Steel conduit & fixing on wall/pole including connected to street light & earth dolly complete all as specified and as directed.

M&L for bracket for street light fitting/ flood light made of 40mm bore medium grade GI tube bent to shape required, Sutable for fixing on wall/ pole including fixed with bolts, nuts, washers duly painting the bracket with two coats of aluminium paint over a coat of zinc chrome primer complete including taking down the existing bracket and refixing and connecting up the light fitting etc all as directed.

Supply and Fixing LED street light luminaire IP-66 grade of proterction with 24 High power LED of 45 watt rating and extendable upto 48 watt rating with unique peanut lens to ensure uniform distribution complete all as specified and as directed . Make: SSK SLF-BO-45 W make of Syska or its equivalent in approved makes

Supply and Fixing in replecement circular LED Flood with innovative finless designand excellent indirect light IP-66 grade of proterction with LED 120 Watt with resistance to impact and corrosion. Glare free and better uniformity Milky version. complete all as specified and as directed . Cat Part No. SSK BLS-N120 W make of Syska or its equivalent in approved makes Note : Any reducer to suit the manufacturer mounting dia for fixing of fitting to existing bracket shall be deemed to be included in the rates quoted by the Contractor.

M&L for point wiring with PVC insulated and unsheathed cable 1.5 Sqmm (nominal area) ISI marked multi-stranded copper conductor single core including 20mm dia medium grade PVC conduit concealed in wall / false ceiling, concealed terminal boxes not less than 1.6 mm thick of required size with top cover 2.8 mm thick of plastic laminated sheet (Hylum) of required colour complete metal flush terminal boxes with all accessories including 1.5 Sq mm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly including colour coding of cable shall be Phase - Red, Neutral- Black and Earth- Green complete all as specified and directed by Engr-in-charge for:-

One light/fan point/Exhaust fan controlled by one way switch 6 amps.

One 5 pin, 5 Amp switch socket out let on the same board with other switches.

One 5 pin, 5 Amp switch socket out let on the independent board.

M&L for point wiring with PVC insulated and unsheathed cable 2.5 Sqmm (Nominal area) stranded copper conductor single core including ISI marked 20 mm dia medium grade PVC conduit for point wiring, concealed in wall /, galvanised steel concealed terminal boxes not less than 1.6 mm thick of required size with top cover 3 mm thick of plastic laminated sheet (Hylum) of required colour with all accessories including 2.5 Sqmm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly for one 5 pin, 15 Amps switch socket out let point on an independent board including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green complete all as specified and directed by Engr-in-charge.

M&L switch piano flush type, 5 Amps, single pole, one way complete all as specified and directed by Engr-in-charge.

M&L switch piano flush type, 15 Amps, single pole, one way complete all as specified and directed by Engr-in-charge.

M&L socket outlet, flush type, 5 pin, 5 Amps, multipurpose complete all as specified and directed by Engr-in-charge.

M&L socket outlet, flush type, 2 in 1, 3 pin, 5 and 15 Amps complete all as specified and directed by Engr-in-charge.

S&F ceiling rose, surface bakelite, size as per relevant IS, three terminals complete all as specified and directed by Engr-in-charge.

M&L for point wiring with PVC insulated and unsheathed cable 4 Sqmm (Nominal area) stranded copper conductor single core including ISI marked 20 mm dia medium grade PVC conduit for point wiring, concealed in wall /, galvanised steel concealed terminal boxes not less than 1.6 mm thick of required size with top cover 3 mm thick of plastic laminated sheet (Hylum) of required colour with all accessories including 4.0 Sqmm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly for one 5 pin, 15 Amps switch socket out let point on an independent board including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green complete all as specified and directed by Engr-in-charge.

S&F MCB DB sheet enclosure, double door, single pole and neutral 240V with 200 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 4 way complete all as specified and directed by Engr-in-charge. Make :

S&F in repair MCB, single pole & neutral, 240 Volts (16 to 40) Amps,10Ka complete all as specified and directed by Engr-in-charge.

S&F in repair MCB, single pole, 240 Volts (05 to 30) Amps,10Ka complete all as specified and directed by Engr-in-charge.

S&F LED light fitting 1x18 watt,6500K ,4 feet long, surface mounted with accessories prewired including 1x18 watt LED tube connecting up with twin core twisted flexible copper conductor cable 0.5 sqmm complete all as specified and directed by Engr-in-charge. Make : Havells cat part no LHEXBLP7UN1W018 or equivalent in approved makes.

Removing excavated soil to a distance exceeding 250 m but n exc 500 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick but n exc one brick complete all as specified and directed.

S&F 50 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings, complete all as specified & as directed.

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed.

M&L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft & loose soil complete all as specified and as directed.

Amount of Sch of Credit is Rs. 2,970.00.

M/S Rohit Enterprises

Shiv Shakti Builders