Himachal

Active

Works

Civil Works

Restoration of rain damages of LWSS Dawandhar in GP Jaunaji Tehsil and Distt. Solan.

HP Irrigation and Public Health

Solan, Himachal Pradesh

Amount: ₹12.0 LCloses: 12 Oct 20265d left

Timeline

Published1 Oct 2026
Closes12 Oct 2026
Bid Opening12 Oct 2026

Tender Value

₹12.0 L

EMD Value

₹24,000

Closing Date

12 Oct 2026, 11:00 am5d left

Tender Inviting Organisation

Name

Executive Engineer

Address

Jal Shakti Division Solan

Work Description

SH Providing, laying and jointing of rising main 65mm dia

Tender Information

Tender ID

2026_HPIPH_144774_1

Reference Number

11364-463 dated 29.09.2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

30 days

Location

Solan

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer tender notice

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredEarnest Money as mention above deposited online and no exemption shall be allowed. (.pdf)

RequiredCost of tender Form as mentioned above deposited online (.pdf)

RequiredDSC Authorization letter (.pdf)

RequiredCertificate of contractor registration with H.P. Jal Shakti Vibhag in appropriate class and late (.pdf)

RequiredPAN card, EPF registration, GST registration and contractor shall have filed Income Tax Return (.pdf)

RequiredUndertaking that contractor have carefully studied all the terms and conditions stipulated in th (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹24,000

Important Dates

Last Activity

1 Oct 2026

Published

1 Oct 2026

Bid Opening

12 Oct 2026

Download Starts

1 Oct 2026

Download Ends

12 Oct 2026

Submission Starts

1 Oct 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (3 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Excavation in drains and channel etc in earth work in all kinds of soil such as kankar, moorum shingles conglomerate saturated soil and decomposed soft and hard rock hard rock including including dressing of sides and beds, disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and then returning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance and as per the direction of Engineer-in-charge.	370.44	P/Cum	1.25	₹463.05
2Providing, laying, jointing, testing & commissioning at site in trenches bevelled ended BIS marked G.I pipe conforming to BIS 1239-1990 (Part-1) & specifications or latest with upto date amendments of following dia (heavy class) having wall thickness and per Rmt weight as mentioned below & capable of withstanding required test pressure as prescribed in BIS code in random lengths of 5.5 to 6.5 mtr. The pipes ends shall be bevelled suitable for butt welding including the cost of jointing with butt welding conforming to IS 816-1969 with electrodes as per IS 814-1991 including required number and size of MS nuts and bolts as per IS: 2712-1998 including 99% butt welded joints. The welding of flanges to be done on both faces in two layers on outer face & one layer on inner face to make the joints leak proof, tail pieces, tees, bends and other specials manufactured from parent pipes as applicable to the particular reach & of approved specification as per site conditions and cutting of pipes wherever required as per site requirement including carriage in all leads and lifts and as directed by Engineer-in-charge. All the joints shall be butt welded except 1% , joints which shall be flanged with flanges of suitable flange table. The laying shall conform to BIS 5822-1994 and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respects or latest with upto date amendments to the entire satisfaction of Engineer-in-charge.
2.01	Dia of pipe 65mm	980	P/Rmt	1.25	₹1,225
3Providing and welding M.S. plate flanges at suitable point, conforming to following tables as per IS 6392-1971 (Latest with up to date amendments) as per IS:6392-1971 (Latest with upto date amendments) and welding of MS Flanges with G.I. Pipes/ MSERW pipes in three layers on both faces to make the joint leak proof (The cost of providing and laying of G.I. Pipes/ MSERW Pipes to be measured and paid for separately). The welding of flanges should conform to IS 816-1969 with electrode as per IS : 814-1991 and required number of nuts & bolts conforming to IS: 1364. The thickness of gasket not less than 3.00mm conforming to IS : 2712-1998. The work shall be done as per entire satisfaction of Engineer-in-Charge within all leads and lifts. (Flange 65mm dia of various table as under).
3.01	Flange Table:- 17	10	P/Pair	1.25	₹12.5

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.36 MB

Work Item Documents

Form_6.pdf

Tender Documents • 0.83 MB

Terms_and_conditions.pdf

Tender Documents • 0.34 MB

BOQ_215396.xls

BOQ • 0.35 MB

Form_8.pdf

Tender Documents • 1.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Excavation in drains and channel etc in earth work in all kinds of soil such as kankar, moorum shingles conglomerate saturated soil and decomposed soft and hard rock hard rock including including dressing of sides and beds, disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and then returning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance and as per the direction of Engineer-in-charge.

370.44

P/Cum

1.25

₹463.05

2Providing, laying, jointing, testing & commissioning at site in trenches bevelled ended BIS marked G.I pipe conforming to BIS 1239-1990 (Part-1) & specifications or latest with upto date amendments of following dia (heavy class) having wall thickness and per Rmt weight as mentioned below & capable of withstanding required test pressure as prescribed in BIS code in random lengths of 5.5 to 6.5 mtr. The pipes ends shall be bevelled suitable for butt welding including the cost of jointing with butt welding conforming to IS 816-1969 with electrodes as per IS 814-1991 including required number and size of MS nuts and bolts as per IS: 2712-1998 including 99% butt welded joints. The welding of flanges to be done on both faces in two layers on outer face & one layer on inner face to make the joints leak proof, tail pieces, tees, bends and other specials manufactured from parent pipes as applicable to the particular reach & of approved specification as per site conditions and cutting of pipes wherever required as per site requirement including carriage in all leads and lifts and as directed by Engineer-in-charge. All the joints shall be butt welded except 1% , joints which shall be flanged with flanges of suitable flange table. The laying shall conform to BIS 5822-1994 and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respects or latest with upto date amendments to the entire satisfaction of Engineer-in-charge.

2.01

Dia of pipe 65mm

980

P/Rmt

1.25

₹1,225

3Providing and welding M.S. plate flanges at suitable point, conforming to following tables as per IS 6392-1971 (Latest with up to date amendments) as per IS:6392-1971 (Latest with upto date amendments) and welding of MS Flanges with G.I. Pipes/ MSERW pipes in three layers on both faces to make the joint leak proof (The cost of providing and laying of G.I. Pipes/ MSERW Pipes to be measured and paid for separately). The welding of flanges should conform to IS 816-1969 with electrode as per IS : 814-1991 and required number of nuts & bolts conforming to IS: 1364. The thickness of gasket not less than 3.00mm conforming to IS : 2712-1998. The work shall be done as per entire satisfaction of Engineer-in-Charge within all leads and lifts. (Flange 65mm dia of various table as under).

3.01

Flange Table:- 17

P/Pair

1.25

₹12.5