Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹5.1 Cr
EMD Value
₹10.2 L
Closing Date
3 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DEN/I/TSK
25 conditions · 14 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited.
The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The tenderers shall submit requisite information as per Annexure-XIVA, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Clause Regarding GST-(a) Tenderer should furnished their GSTIN numbers representing the States in which they are registered for GST, along with address of Registered Office, Place of business in State etc. (b) The contract is under GST act & rules as applicable time to time.(c) All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law.
Experience in similar nature of work- (a)The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
( i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
ii) The total value of similar nature of works completed during the qualifying period and not the payments received within qualifying period alone shall be considered. (iii) It should be noted that credentials against the work executed for private organizations shall not be considered. The credentials against similar nature of work done certificate issued from Govt/Semi-Govt Organizations and PSUs are only acceptable.
(b)In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
(i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.
Note: Separate completed works of minimum required values for each component can also be considered for fulfilment of technical eligibility criteria.
(ii)In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than 2 crore each
Note for Special Technical Criteria- Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/ last bill paid by company in support of above work experience certificate.
"No post tender correspondence will be done with the participant tenderer(s) for deficient credentials noted during scrutiny of tender/ offer nor any credential will be accepted after opening of the tender and the offer shall be decided on the basis of submitted/ credentials downloaded with offer only".
Similar Nature of Work- "PSC grider bridge on Pile/ well foundations".
27 conditions · 8 needing a document upload
The tenderer should furnish detail information in regards to Employment/Partnership etc. of Retired Railway Employee as per clause 16 of GCC -2022 and clause no. 14 of second sheet of Tender document. In case no employment/Partnership etc., NIL declaration to be submitted.
The tenderer/s shall submit a duly filled Tender Form (First Sheet) as Annexure-I of Section-VII of the Standard tender document.
Railway Boards letter No. 2020/ACII/9/6/e dtd.07.04.2022At the time of submission of Bank Guarantee, it is necessary that following details entered into SFMS by bank authority while issuing Bank Guarantee by vendors/contractors in favour of Railways. (R.B's letter No. 2020/ACII/9/6/e dtd.07.04.2022)IFSC CODE SBIN000RAILIFSC type BRANCHBANK NAME STATE BANK OF INDIABRANCH NAME RAILCITY NAME NAVI MUMBAIADDRESS SECTOR-11, CBD BELAPUR, NAVI MUMBAIDISTRICT NAVI MUMBAISTATE MAHARASHTRABG ENABLED YESThis IFSC code is only valid for BG issuance and verification in favour of Railways.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The following documents should be specified for submission along with tender:
A. List of Personnel, Organization available on hand and proposed to be engaged for the subject work.
B. List of plant Machinery available on hand own and proposed to be inducted own hired to be given separately for the subject work.
C. List of Works completed in the last three financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work, Date of actual start, actual completion and final value of contract should also be given.
D. List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.
The tenderers whether sole proprietor , a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. along with the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement , receive money, witness measurements, sign measurement books , compromise, settie, relinquish any claims, preferred by firm and also sign No Claim Certificate and refer all or any disputes arbitration.
The manual/offline mode of payment through Demand Draft, Bankers Cheque, Cash Deposit Receipt shall not be available against works tenders. The bidders will have to make all payments either through Net Banking, debit/credit etc. available on IREPS Portal. Fixed deposit Receipt (FDR) will not be accepted as EMD for tenders invited on IREPS (e-tender portal).
Tenderers intending to participate in the e-tender must make payment of the Cost of Tender Document and Earnest Money, online as per the provisions available in IREPS Works Tender Module.
For those conditions for which standard formats have been given in the uploaded document titled-Formats for uploading of various format. The information should only be submitted in these standard formats.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
In addition to General condition of contract 2014 and Indian Railways Unified standard specification Works Materials Volume I II 2010, revised upto date, special condition attached shall also apply.
Sales tax/Business tax, Royalty etc. will be recovered as per extant instruction on the subject.
Note for Commercial compliance :-
In case of items C. and D. of Commercial Compliance, supportive documents/certificates from the organizations with whom they worked/are working should be enclosed.
Certificates from private individuals for whom such works are executed being executed is not acceptable.
Eligibility criteria for works tender in respect of partnership firms:-
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
JOINT VENTURE will not be permitted for the tenders.
Any Conditional offer will be summarily rejected.
For Standard Financial criteria and Standard Technical criteria - Tenderers are required to submitted authenticated certificate along with the tenders from officers of government or semi- government/public sector undertakings under whom the work has been executed indicating there in the name of work executed, value of works/payment details and period during which completed. Such certificates should have signature and seal of the concerned officer. In the absence of such certificate the tender may not be considered.
Tender would close at the specified time and date. In case the specified date is declared a holiday, the Tender would close at the same time on the next working day.
AT Sepon- Extension of Br 53 (1*0.91m) and Br 54 (3*6.1m) for provision of two additional lines in connection with Upgradation of 'D" class station to 'B' class station.
01-TSK-ENGG-62-2026~NFR
01-TSK-ENGG-62-2026
Open
Works - General
12 Months
Tinsukia, Assam
₹0
₹10.2 L
11 Nov 2026
11 Nov 2026
19 Nov 2026
67 items across 2 schedules · ₹5,08,41,340.02 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Using Soil Class SQ1 | cum | 500.00 | 391.59 | 1,95,795 |
| 2 | Manufacturing of blanketing material by wet mixing of naturally available suitable soil including additional blending with naturally a v a i l a b l e or manufactured material as required to achieve specified gradation, in designed proportion in Pug mill or wet mix plant to have uniform gradation including all incidental transportation, laying over finished formation in uniform layer(s) with motor grader, compaction with suitable vibratory roller to specified density and finishing to correct profile, complete as per RDSO Specification No. RDSO/2020/GE: IRS-0004 with latest correction slips. | cum | 500.00 | 1,202.73 | 6,01,365 |
| 3 | Shoring with 'Z' section MS sheet piles side by side in all kinds of soil mechanically or manually as per approved drawing with contractor's own arrangement complete in all respects and removal of sheet piles after completion of the work as directed by engineer in-charge Note: Payment will be made as per actual driven length of pile. | Sqm | 680.00 | 1,025.49 | 6,97,333.2 |
| 4 | 0m to 10m | Metre | 300.00 | 1,793.75 | 5,38,125 |
| 5 | 10m to 20m | Metre | 300.00 | 1,839.1 | 5,51,730 |
| 6 | Plate size 30cm x 30cm | Each | 2.00 | 1,38,697.64 | 2,77,395.28 |
| 7 | Plate size 45cm x 45cm | Each | 2.00 | 1,58,199.8 | 3,16,399.6 |
| 8 | Plate size 60cm x 60cm | Each | 2.00 | 2,27,463.57 | 4,54,927.14 |
| 9 | Taking out 100mm dia. & 450mm long undisturbed samples of soil from bore holes, including provision of air tight containers for packing and, labeling incl. transporting the samples to laboratory. Piston sampler shall be used for extracting undisturbed samples where necessary. Samples shall be collected as per IS:2720. | Each | 10.00 | 768.18 | 7,681.8 |
| 10 | Taking out 100mm dia. & 450mm long disturbed samples of soil from bore holes, including provision of air tight containers for packing, labeling and transporting the samples to laboratory. Samples shall be collected as per IS:2720. | Each | 10.00 | 901.97 | 9,019.7 |
| 11 | Conducting standard penetration test as per IS:2131 at approximate1.5m intervals in bore holes, as directed by the Engineer in charge | Each | 200.00 | 412.15 | 82,430 |
| 12 | Moisture Content/Dry Density | Each | 2.00 | 1,057.88 | 2,115.76 |
| 13 | Atterberg Limits | Each | 2.00 | 1,157.09 | 2,314.18 |
| 14 | Specific Gravity | Each | 2.00 | 688.81 | 1,377.62 |
| 15 | Grain size analysis including Hydrometer analysis | Each | 2.00 | 1,742.72 | 3,485.44 |
| 16 | Direct Shear Test | Each | 2.00 | 2,506.37 | 5,012.74 |
| 17 | Natural Density | Each | 2.00 | 2,041.49 | 4,082.98 |
| 18 | Consolidation Test | Each | 2.00 | 2,607.84 | 5,215.68 |
| 19 | Unconfined Compression Test | Each | 2.00 | 2,855.03 | 5,710.06 |
| 20 | Tri-axial Test | Each | 2.00 | 2,735.4 | 5,470.8 |
| 21 | All kinds of soils | cum | 800.00 | 204.99 | 1,63,992 |
| 22 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) | cum | 67.50 | 3,992.36 | 2,69,484.3 |
| 23 | 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size). | cum | 40.00 | 4,171.7 | 1,66,868 |
| 24 | Providing and laying in position machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality in RCC raft foundation & Pile cap including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as p e r specifications and direction of the Engineer in charge. N o t e : 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item. | cum | 510.00 | 4,088.96 | 20,85,369.6 |
| 25 | Abutment & Pier | cum | 100.12 | 4,172.4 | 4,17,740.69 |
| 26 | Wing wall and Return wall | cum | 149.50 | 4,172.4 | 6,23,773.8 |
| 27 | 1200mm diameter | Metre | 300.00 | 7,652.01 | 22,95,603 |
| 28 | Providing, fabricating and installing permanent casing pipe for bored piles for all diameters with specified thickness of steel plate including all labour, materials, tools & complete as per approved drawing & specifications complete in all respect as per the direction of Engineer in charge. Note: Payment shall be made as per the weight of circular plate of casing pipe only. | MT | 19.80 | 1,39,982.15 | 27,71,646.57 |
| 29 | Initial load test above 100 ton and up to 250 T capacity pile | Each | 2.00 | 1,07,831.59 | 2,15,663.18 |
| 30 | Routine Load Test above 100 ton capacity up to 250 ton capacity pile | Each | 2.00 | 53,915.8 | 1,07,831.6 |
| 31 | Piles with lateral load capacity of above 50 ton and up to 100 ton | Each | 2.00 | 34,092.66 | 68,185.32 |
| 32 | Pulse Echo Test (PET) for integrity testing of piles with contractor's men, materials and machines. The rate includes cost of Inspection of site, preparation of pile head and any other unforeseen cost required for the test, submission of reports in triplicate as per satisfaction of the Engineer in Charge. | Each | 16.00 | 3,918.95 | 62,703.2 |
| 33 | Providing and casting machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix, mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants, (Cast in-Situ/Pre- cast) in bottom/top slab, side walls, toe wall and sumps haunch filling head walls, thrust bed or any other component using 20mm graded crushed stone aggregate and coarse sand of approved quality of RCC box of any size including finishing, Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability, complete as per drawings and technical specifications as directed by Engineer in charge. N o t e : 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons at the stage of Mix Design and in that case deduction shall be made as per relevant item. | cum | 160.00 | 4,497.86 | 7,19,657.6 |
| 34 | All types of bridge sub-structures, e.g. pier, abutment, wing wall, retaining wall, RCC box type foundations, Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc. up to 5m above ground level | Sqm | 483.73 | 718.9 | 3,47,753.5 |
| 35 | All types of bridge super-structures, e.g. slabs, I-girders, T-girders, Box girders etc. up to 5m above ground level. | Sqm | 475.00 | 920.38 | 4,37,180.5 |
| 36 | Supplying, spreading and compacting well graded hard stone of 63mm average size (maximum up to 80mm size) in the bottom of foundation of box culverts, bridges etc. including all lead, lift, ascent, descent etc. complete job as per directions of Engineer In- charge. | cum | 60.00 | 2,436.68 | 1,46,200.8 |
| 37 | Ordinary Portland Cement 53 grade of approved brands/makes | MT | 569.98 | 9,099.97 | 51,86,800.9 |
| 38 | Thermo-Mechanically Treated bars of grade Fe-500D or more of approved brands/makes. | Kg | 198000.00 | 113.67 | 2,25,06,660 |
| 39 | Providing and launching in position machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality for the Precast Prestressed (Post-tensioned) Concrete Girder/Box Girders/Slabs in contactor's casting yard in the vicinity of worksite, including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability, complete as per drawings, specifications and direction of the Engineer. Note: 1. Payment for Shuttering, Cement, Reinforcement, HTS cables, Sheathing, Anchorage Cones, stressing of cables, grouting of the ducts and launching of girder/slab in position shall be made extra under relevant items. However, deduction shall be made in case of slab as per relevant item. 2. For pre-cast item, loading in transport vehicle in casting yard is included and shall not be paid extra. 3. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons at the stage of Mix Design and in that case deduction shall be made as per relevant item. | cum | 60.00 | 4,088.96 | 2,45,337.6 |
| 40 | Providing, fabricating & fixing in position to exact design profiles, H.T.S. cables of all classification made from Low Relaxation strands conforming to IS:14268- latest version in Prestressed (Post-tensioned) Concrete girders/slabs etc. including supplying, cutting, making into cables with necessary spacers, colour coding, protecting with water soluble oil at all time, anchoring of cables, supplying and placing spiral corrugated type galvanized metal steel ducts sheathing made up of Cold Rolled Cold Annealed (CRCA) mild steel conforming to IS:513 of required diameter/ thickness, vent pipe, placing, bending, routing, fixing, stressing & grouting of cable ducts with cement grout, Anchorage sets in required number with provision for future prestressing if any including all lead and lift with contractor's own materials, labour, equipments etc. complete as per drawings & specifications. Rate also includes covering anchorage pads with epoxy mortar of approved quality to avoid corrosion. Cement for grouting to be paid separately. Payment shall be made in terms of weight of HTS cables as per drawing. | MT | 0.20 | 2,35,782.77 | 47,156.55 |
| 41 | Above 5 km up to 10 km | MT | 100.00 | 189.81 | 18,981 |
| 42 | Above 150 km up to 200 km | MT | 100.00 | 1,016.63 | 1,01,663 |
| 43 | Above 200 km | MT- Km | 30000.00 | 5.29 | 1,58,700 |
| 44 | Providing Flood Level Gauges on abutments and piers, made by 20mm thick 1:4 cement plaster for a width of not less than 300mm, duly engraving markings & figures in metres, divided into 10 parts commencing from under-side of girders towards bed, painting markings & figures with black enamel paint in three coats on white background including painting HFL Mark in white by side of gauge with year of occurrence with all Contractor's materials, labour, tools, scaffolding and supports, lead & lifts, curing etc. complete as per approved drawing and as directed by the Engineer in- charge excluding cost of cement which shall be paid extra. | Sqm | 5.00 | 611.17 | 3,055.85 |
| 45 | 200 MT capacity | Day | 2.00 | 1,98,255.36 | 3,96,510.72 |
| 46 | Laying of boulder apron laid in wire crates of approved size including overlaps at joints, laid with stone boulders, all loose ends to be tied with 4mm galvanised steel wire. Payment for boulders & wire crates to be done extra. | cum | 800.00 | 743.37 | 5,94,696 |
| 47 | Supplying of stone boulders weighing not less than 35 kg each at specified bridge locations. | cum | 950.00 | 1,770.51 | 16,81,984.5 |
| 48 | Manufacture and supplying Galvanized Wire Net Trungers made from 4mm galvanised steel wire @ 32 kg/10sqm having minimum tensile strength of 300 Mpa conforming to IS:280 and galvanizing coating conforming to IS:4826, woven into mesh with double twist, mesh size not exceeding 100mm x 100mm. | Sqm | 2600.00 | 497.28 | 12,92,928 |
| 49 | Providing and laying Pitching with Stone Boulders, weighing not less than 35kg each with voids filled with spalls on slopes, laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical Specifications (filter media to be paid separately under the relevant item). | cum | 250.00 | 2,579.28 | 6,44,820 |
| 50 | Providing and laying Pitching with Stone Boulders, weighing not less than 35kg each with voids filled with cement sand mortar 1:4 on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical Specifications (filter media to be paid separately under the relevant item). Rate is excluding cost of cement which shall be paid extra under relevant item. | cum | 40.00 | 3,717.45 | 1,48,698 |
| 51 | Providing and laying flooring with rubble stone, laid over 15cm thick CC 1:2:4 and the voids filled with CC 1:2:4 complete with the joints pointed with 1:2 Cement Sand mortar as per drawing and Technical specifications. Payment for cement to be done separately. Voids in the rubble stone to be taken as 35% of the gross volume of the stone layer. Note: Base concrete shall be paid extra under relevant item. | cum | 100.00 | 3,953.02 | 3,95,302 |
| 52 | Providing and laying 300mm thick (average) Dry Stone flooring with boulders of not less than 35kg each in weight, hand packed with surface levelled off to the correct section with hammer dressing as necessary on the ground including filling the gaps with quarry spalls and ordinary sand complete including cost of supply of all materials, labour, lead, lift, tools, plants, crossing of tracks and the like as per drawing and technical specification as directed by Engineer in charge. | cum | 100.00 | 3,072.68 | 3,07,268 |
| 53 | Supply and laying of quarry dust including consolidation, supply of all materials, labour, lead, lift, tools, plants, crossing of tracks as per drawing and technical specification as directed by the Engineer in charge in case loose slush is encountered at site of foundation before casting the foundation or laying the filtering media. | cum | 400.00 | 2,489.06 | 9,95,624 |
| 54 | Providing weep holes by making suitable opening or drilling in existing Brick Masonry / Plain / Reinforced Concrete abutment, wing wall/return wall with 110 mm dia UPVC pipe (working pressure 4kg/sqcm) extending through the full width of the structure complete and repairing the same with cement mortar 1:2 (1 cement : 2 coarse sand). Rate is excluding the cost of cement which shall be paid extra. | Metre | 160.00 | 529.41 | 84,705.6 |
| 55 | Providing and laying of filter media consisting of granular materials of GW, GP, SW groups as per IS:1498 (latest) in required profile behind boulder filling of abutments, wing walls / return walls etc. above bed level with all labour and material complete job as per drawing and technical specification of RDSO Guidelines. | cum | 350.00 | 2,807.07 | 9,82,474.5 |
| 56 | Providing cast in-situ plaques for bridge foundations details of size 45cmx45cmx5cm in cement concrete 1:2:4 mix using 20mm hard stone aggregate embedded in 30mm deep notch over abutment & piers, engraving the letters & figures with CM 1:3 and finished smooth including painting letters and figures with 2 coats of black enamel and plaque with white enamel with all labour, tools, cement, paint, curing etc. as a complete job. | Each | 4.00 | 2,111.54 | 8,446.16 |
| 57 | Providing Boulder Backing behind wing wall, return wall, retaining wall with hand packed boulders & cobbles with smaller size boulders toward the back including all lead, lift, labour & other incidental charges as complete work in all respect. Payment for boulder/cobbles will be done extra. | cum | 120.00 | 432.14 | 51,856.8 |
| 58 | Dewatering of natural or accumulated water from any location. Payment to be done for Horse power of pump multiplied by pumping hours. | HP Hour | 160.00 | 58.42 | 9,347.2 |
| 59 | Supplying and filling 50 kg size empty cement polythene bags with Rly. Ballast/moorum/earth/Sand/quarry dust etc. placing the filled bags on the high banks /bridge approaches/nominated place etc. dumping and spreading at the nominated locations to profile under block period with all contractor's labour, tools, plants, loading, unloading, filling, spreading including all lead/lift etc. complete and as directed by the Engineer in charge at site including crossing of track where necessary. | Each | 12000.00 | 17.83 | 2,13,960 |
| 60 | Supply, filling and stacking of sand bags layer by layer filled with Railway Sand/railway quarry dust in Contractor's empty polythene cement bags of 50 kg bags with all contractors labour, tools, plants, lead, lift etc., including stitching the same with machine using polythene thread complete as directed by Engineer-in charge at site. | Each | 1800.00 | 16.55 | 29,790 |
| Schedule total | ₹5,07,73,407.02 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
STDwithPVCason08.10.26.pdf
ATTACHMENT
ArbitrationAdvancecorrectionslip10.pdf
ATTACHMENT
GCCACSno.11_compressed.pdf
ATTACHMENT
JPOofCablecutting.pdf
ATTACHMENT
ImplementationofContractore-MeasurementBookwithcorrectionslip.pdf
ATTACHMENT
LabourLawprovisionguideline.pdf
ATTACHMENT
DLP-MaintenancePeriodguidelines.pdf
ATTACHMENT
SpecialconditionExtensionofBridge.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .