PROVIDING HOUSEKEEPING SERVICES AND CIVIL AND ELECTRICAL WORKS IN OFFICE AND COLONY AT ERPL KANPUR

Amount

Part A: Labour Wage Component & Liveries

Wages of one semi-skilled manpower to be paid monthly for housekeeping services in station. It includes Minimum basic wages (including additional payment), PF, ESI and Bonus.

Wages of One (01) unskilled manpower to be paid on monthly basis for housekeeping services in Colony. It includes Minimum basic wages (including additional payment) PF, ESI and Bonus

Providing one set of liveries to the two manpower. The contractor has to submit original bill, upon verification of which by EIC, payment will be reimbursed.

Service Charge

Part 'B': Miscellaneous Civil & Electrical works.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing ISI marked oxidised (copper oxidised as per IS:1378) M.S. tower bolt (Barrel type), black finish with necessary screws etc. complete :

Providing and fixing 35 mm thick wire mesh door shutter for entrance doors made of styles and rails of 35 mm thick 2nd class teak wood, galvanised M.S. wire mesh (gauze) of average width of aperture 1.18 mm with wire of dia 0.56 mm including necessary fittings such as heavy type oxidised brass butt hinges with necessary brass screws, anti-termite, wood borer treatment, painting/ polishing to required shade etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] : Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)

Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations]

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources]

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix : 1:4 (1 cement : 4 fine sand)

Dismantling of flushing cistern of all types (C.I./ PVC/ Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per the directions of Engineer-in-Charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing ISI marked oxidised (copper oxidised as per IS:1378) M.S. tower bolt (Barrel type), black finish with necessary screws etc. complete :

Long pattern W.C. pan of size 580 mm

Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing white vitreous china pedestal type water closet (European type) (Ref. Make: HINDWARE, Model: Cat No.-20058 or equivalent approved) with seat and lid, 10 litre low level white vitreous china dual flushing cistern (Ref. Make: HINDWARE, Model: Cat No.-21028 or equivalent approved) & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x 250 mm

External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per directions of the Engineer-in-Charge :

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste Flexible fittings complete : 40mm dia

Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour :

450 mm long towel rail with total length of 495 mm, 78 mm width and effective height of 88 mm, weighing not less than 170 gms.

600 mm long towel rail with total length of 645 mm, 78 mm width and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT pillar cock of approved quality and colour : 15 mm nominal bore, 107 mm long, weighing not less than 110 gms

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory : 80mm diameter C.I. pipe

Rewinding of ceiling/pedestal/exhaust/air circulator fans of all types/sizes/make including 1-phase and 3-phase type exhaust fans max.upto 2.2KW capacity and supply of super enameled winding wire (Devi Dayal make, ISI marked insulation materials required). This also includes replacement of single/double bearing SKF make/bushes (as per original make) and overhauling of fan and all jobs related to complete this work in totality. this also includes removal of fans from site, installation, and commissioning after testing of rewound fans and replacement of condenser, if required. this also includes transportation fronm site after dismantling to Contractor's workshop and back to site. Note: Contractor has to give guarantee for rewinding of above items for a period of six (06) months of working of fans, it has to be rewound again free of cost of contractor. the burnt winding shall be kept by contractor.

Ceiling/pedestal fans

Exhaust/air circulators fans

Overhauling of exhaust/air circulator fans of various types/sizes/make and its bearings including removal from site, cleaning, greasing after degreasing, assembling and fixing in position, testing and commissioning including transportation from site to workplace and back. All complete with labour and materials as per directions of Engineer-in-Charge.

Including supply and fixxing of bearings of SKF make (2 nos. bearings)

Overhauling of exhaust/air circulator fans of various types/sizes/make and its bearings including removal from site, cleaning, greasing after degreasing, assembling and fixing in position, testing and commissioning including transportation from site to workplace and back. All complete with labour and materials as per directions of Engineer-in-Charge.

Excluding the cost of bearings

Including supply and fixxing of bearings of SKF make and bushes (as per original make) of both sides by Contractor.

Supply and Installation of 230V, 18W, LED tube light of Philips/Havells/Crompton/Bajaj make or equivalent.

Supply and installation of 9W LED bulb of Philips/Havells/Cromton/Bajaj make or equivalent.

Supply, fixing and connection of 250V flush type/tumbler Anchor make or approve equivalent switch, socket bell push etc. on perpex sheet on MS box including supply and fixing of nuts,bolts etc. but excluding the perpex sheet all complete with labour and materials as per direction of the Engineer-in-Charge.

1 way 5/6 amps. Piano type switch with ISI mark.

1 way 15/16 amps. Piano type switch with ISI mark.

Piano type 5 pins 5/6 amps. Socket outlet

3 pins flush type 15/16 amps. Socket outlet.

Supply, fixing and connection of below given lamp holders (M/s Anchor or equivalent make) suitable for 100W GLS lamps on test lamp including supply nad fixing of nuts,bolts,screws etc. all complete with labour and material as per direction of Engineer-in-Charge. Pendent Brass Lamp holder with skirt.

Supply,fixing and connection of 250V below given mosaic wiring accessories of M/s MDS or approved equivalent including supply nad fixing of nuts,bolts,etc. complete with labour and materials as per direction of the Engineer-in-Charge.

6 amps., 1way,SP, 1 module switches

6 amps., 2way,SP, 1 module switches

16 amps., 1way,SP, 1 module switches

Two module stepped type electronic fan regulator 100W.

6 amps. 3 pins combined 2 module shuttered socket

6/16 amps. - pins combined 3 module shuttered socket.

Providing and fixing 63amps. Metal clad TP & N switch fuse unit, 415/500 V, without H.R.C. fuses including drilling holes on the board,connections,earthing the body etc. as required. A) ISI marked HRC fuses shall be used. B) TPN of English Electric/L&T/Crompton/Havells/standard make shall be used.

Providing and fixing 100 amps. Metal clad TP & N switch fuse unit, 415/500 V, without H.R.C. fuses including drilling holes on the board,connections,earthing the body etc. as required. A) ISI marked HRC fuses shall be used. B) TPN of English Electric/L&T/Crompton/Havells/standard make shall be used.

Supplying and fisxing of following rating 240V,50Hz,10KA 'L' series, miniature circuit breaker (suitable for lighting and other domestic loads and conforming to IS8828: 1996) of single poles in the existing MCB DB complete with connections, testing and commissioning etc as required. Note: ISI marked MCBs of Havells/Loadster/Indo Kopp/L&T make or equivalent shall be used.

5 to 32 Amps.

Supplying and fixing 5A to 32A rating 240/415V,50Hz,10KA 'G' series, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS8828: 1996, IEC60898:2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required. Note: ISI marked MCBs of Havells/Loadster/Indo Kopp/L&T make or equivalent shall be used.

5A to 32A, Double Pole

Supplying and fixing following rating, single pole & double pole isolator in the existing MCB DB completet with connections,testing and commissioning etc. as required. Note: ISI marked isolators sahll be used.

40A, Double Pole

Supplying and fixing following rating, three pole & four pole, 415V, isolator in the existing MCB DB completet with connections,testing and commissioning etc. as required. Note: ISI marked isolators sahll be used.

Supplying and fixing following rating, double pole (single phase neutral),240V, residual current circuit breaker (RCCB),ISI marked having a sensitivity current indicated milliamperes in the existing MCB DB completet with connections,testing and commissioning etc. as required. Note: ISI marked RCCB sahll be used.

40A, 300mA sensitivity

63A, 300mA sensitivity

Point wiring - Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade including earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit (Supply & installation of PVC conduit covered elsewhere in SOR) recessed on wall/ceiling/ false celing including supply & installation of switch boxes,junction boxes, pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC copper wire from D.B. to switchboard as required is also in the scope of the contractor: 1 light point controlled by 1 switch

Wiring with PVC insulated 2.5 sqmm copper conductor wire for fan points (1 fan point controlled by 1 modular switch) including providing space for electronic regulator in switch box, providing and fixing fan hook in the ceiling as per specifications and drawings. Ceiling fan wiring:

Wiring for 250 V single phase and neutral 6 amps modular plug point with PVC insulated 2.5 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 1.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 5 pin 6A modular socket and 10 A modular switch (1 plug point per circuit) as per specifications and drawings. 6 A plug point wiring:

Wiring for 250 V single phase and neutral 16 amps modular power plug point with PVC insulated 4 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 2.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 6 pin 16/6A modular socket and 20/10 A modular switch (1 plug point per circuit) as per specifications and drawings. 16 A power plug point wiring:

Point wiring for power plug point with 4 sq.mm stranded PVC insulated copper wire including earthing the third pin with 2.5 sq. mm copper insulated earthing wire complete with supply and fixing of recessed mounted industrial type 3 pin 32 A metal clad socket and plug, 20A MCB (Motor duty) housed in a 16 gauge M.S. Box. AC point wiring

Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of first quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including pointing the joints with white cement and matching pigment, etc. complete.

Providing and fixing Unplasticised PVC (uPVC) pipe clips (110 mm) of approved design to unplasticised-PVC rainwater pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty : Float glass panes of nominal thickness 4.0 mm (weight not less than 10 Kg/sqm)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia up to 300 mm dia for all depth.

White Vitreous China Wash basin size 550x400 mm (Ref. Make: HINDWARE, Model: Cat No.-10010 or equivalent approved) with a pair of 15 mm C.P. brass pillar taps

Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by the Engineer-in-Charge.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms : 15 mm nominal bore

GYAN ENGINEERING AND COMMERCIAL ENTERPRISES

PAL ENGINEERING WORKS

MAHADEV ENTERPRISES

Ganesh Chandra Tiwari

Prasad Engineering

M/S Satish Kumar