SPECIAL REPAIR TO BLDG NO-P-128, P/129 AND P/134 AT HAMID ENCLAVE IN THE AREA OF AGE B/R -II UNDER GE PANAGARH

Amount

B/R PORTION

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc ,complete all as specified and as directed.

M&L for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius,built in cement mortar (1:4) ,complete all as specified and as directed.

M&L for Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:4) ,complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone walls and ceiling ,chajja, landing etc including racking of joints hacking for key scrubbing down with water etc ,complete all as specified and as directed.

Roughening/cleaning surfaces of roof with wire brush, sweeping clean and washing down with water to remove dust etc ,complete all as specified and as directed.

Brushing neat cement slurry @ 3 KG of cement per sqm mixed with water proofing compound ,complete all as specified and as directed.

M&L for cement concrete type B0 1:2:4 (12.5mm graded agg) in padding for levelling course of roof, rounded or chamfer edge sloping, coving all around at the junction of parapet and the roof slab etc concrete mixed with water proofing compound ,complete all as specified and as directed. Note: WPC measured and paid separately.

Supply only water proofing compound, complete all as specified and as directed.

Providing water proofing treatment with 3mm thick APP (Atactic polypropylene) modified polyester (bituminous) membrane miniumum weight 3kg/sqm reinforced with polyster non wove fabric wt not less than 150gms/sqm flammable polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane, after applying a coat of bituminous primer @ 0.25 Kg/Sqm over roof (An overlap of 100mm and 150mm shall be provided on sides and ends respectively) ,complete all as specified and as directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified and as directed.

M&L for Rendering 5mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on ceilling surface in cement mortar (1:3) ,complete all as specified and as directed.

M&L for Rendering 15mm thick in cement plaster on fair faces of brick work in cement mortor 1:4, finished even and smooth (without using extra cement) on walls ,complete all as specified and as directed.

M&L for applying three coat of white wash on new surface of ceiling ,complete all as specified and as directed.

M&L for applying one coat of white wash on old surface of ceiling ,complete all as specified and as directed.

M&L for applying two coat of white wash on old surface of wall ,complete all as specified and as directed.

M&L for Two coats of Oil bound destemper on wall surface including wall care putty over chalk whiting and completely removal of existing surface ,complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over chalk whiting ,complete all as specified and as directed.

M&L for applying three coat of white wash on surface of wall ,complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm agg.) in plinth protection finished even and smooth without using extra cement ,complete all as specified and as directed.

M&L for Polythenen film ,black 50 micron laid in floors ,complete all as specified and as directed.

M&L for 40mm thick cement concrete type B1 1:2:4 (20mm graded agg) as in flooring including finishing the cement concrete surface even and smooth without using extra cement ,complete all as specified and as directed.

M&L for 25mm thick cement concrete type B1 1:2:4 (12.5mm graded agg) as in sub base and over 15mm thick screed bed in cm in 1:6 ,complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (squre/rectangular) area of each tile exc 0.18 sqm but n exc 0.36 sqm in floors etc as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match ,complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (squre/rectangular) area of each tile exc 0.06 sqm but n exc 0.11sqm in floors etc as in floors and over 15mm thick screed bed in cm 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match ,complete all as specified and as directed.

M&L for Glazed white ceramic colour tiles of size 300x200x 6 to 7mm laid on vertical surface such as dado/skirting over 10mm rendring im CM 1:4 cement mortar bed set jointed in neat cement slurry and pointed in white or coloured cement ,complete all as specified and as directed.

M&L for providing Granite(of any type) as in cills,jambs, cooking platform etc 20mm thick laid over cement screed and jointed with gray cement slurry and pointed with adimixture of pigment to match the shade of granite including grinding and polishing ,complete all as specified and as directed.

Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises for minor repairs to floor in patches ,complete all as specified and as directed.

Taking down chowkhats or frame not exceeding 1.5 Sqm each with shutter(s) (without taking off shutters from the frame) ,complete all as specified and as directed.

Taking down chowkhats or frame exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter(s) (without taking off shutters from the frame),complete all as specified and as directed.

M&L for Factory made, 35 mm thick, panelled shutter second class hard wood, plain framed, hammer marked, with lock rail . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated ,complete all as specified and as directed.

M&L for Factory made, 35 mm thick, skleton shutter second class hard wood, plain framed, hammer marked, with lock rail . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated ,complete all as specified and as directed.

M&L for plain solid straight chowkhats 2nd class hard wood and frame,wrought ,framed rebated on the solid ,rounded or chamfered put together with glue pinnedat jpints ,complete all as specified and as directed.

S&F steel window with side hung shutter including projection type hinges with steel handle and steel peg stay complete with glazing bars doveted or welded ,complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges,steel peg stay ,complete all as specified and as directed.

M&L for frame work such as grill, gates etc with ends of bars shoulder and riveted or forged into spike,framed guard bars and similar work conformed to Fe-290, Gde E-165 ,complete all as specified and as directed.

M&L for preparation of new steel surface of any description exc 10cm width or grith and applying two coat of synthetic enamal paint over a coat of red oxide primer ,complete all as specified and as directed.

M&L for fillet 2nd class hard wood exc 13 & 25sqcm squre or rectanglular in section clean secured with nails ,complete all as specified and as directed.

Dismantiling fillet ,rail,post of any descriptionin any position ,complete all as specified and as directed.

Dismantiling boarding of any description fixed in any position ,complete all as specified and as directed.

M&L for prelaminated particle board 18mm thick,interior grade,prelamited one side with decorative choice otherside balanceing white lamination fixed with nails ,complete all as specified and as directed.

S&F in repair's 40mm dia brass cubboard knobs fixed with nuts screw and washer folished ,complete all as specified and as directed.

S&F aluminium alloy anodised tower bolt 100 mm long ,complete all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type 100mm long ,complete all as specified and as directed.

S&F 75mm stainless steel butt hinges type D22 ,complete all as specified and as directed.

S&F 100mm long haps and staple safety type aluminium anodised pin including ,complete all as specified and as directed.

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames/ glazed with putty or fixed with beads ,complete all as specified and as directed.

S&F in repair's 3mm thick glass sheet ordinary quality and glazing with in square, n exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator ,complete all as specified and as directed.

S&F in repair's Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples ,complete all as specified and as directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door opening ,complete all as specified and as directed.

S&F factory made solid PVC door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifiecation & drawing.

S&F aluminium anodised tower bolt of extruded section of length 150mm ,complete all as specified and as directed.

S&F mild steel anodised butt hinges 100 mm long ,complete all as specified and as directed.

S&F aluminium anodised handle of extruded section of length 150mm ,complete all as specified and as directed.

Cutting holes in brick wall exc half brick but not exc one brick for inserting hold fast and macking good dismanteled portion in cm 1:4 or cement concret 1:2:4 type B-I ,complete all as specified and as directed.

S&F hold fasts inserted brick wall ,complete all as specified and as directed.

S&F in repair's Aluminium Curtain Rods 20mm dia Decorative type with a pair of brackets, powder coated of approved pattern and colour ,complete all as specified and as directed.

S&F in repair's mild steel spring for doors 300mm, ordinary rat rail rod pattren springs including roller and roller plate ,complete all as specified and as directed.

S&F in repair's aluminium anodised door stopper with rubber foot , ISI marked and fixed with standard aluminium screws ,complete all as specified and as directed.

M&L for Two coats of synthetic enamel paint over one coat of wood base primer of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces ,complete all as specified and as directed.

S&F in repair's CP Stop/angle valve, any description, suitable for 15mm bore pipe ,complete all as specified and as directed.

S&F in repair's Bib taps, cast copper alloy , chromium plated fancy type, long body with wall flange screwed down, suitable for 15 mm bore pipe, complete all as specified and as directed.

S&F in repair's PVC connections 15 mm bore with PTMT nuts of length 450 mm ,complete all as specified and as directed.

S&F in repair's Stainless steel towel rail 20mm dia D type solid 60cm long between flanges of approved make and pattern, fixed to walls with screws, complete all as specified and as directed by Engr-in -Charge.

S&F in repair's PVC low level flushing cistern of 10 litre capacity, white (to match the EWC/IWC) including brackets , with inlet ball valve float, handle,flush pipe etc. ,complete all as specified and as directed.

S&F in repair's vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, excluding flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface ,complete all as specified and as directed.

S&F in repair's Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes ,complete all as specified and as directed.

S&F GI Tubes 15 mm bore, ‘medium grade’ with all fittings and fixed to walls and ceilings or laid in floors ,complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store ,complete all as specified and as directed.

S&F in repair's Stainless steel swivel shower arm 15mm size ,195mm long with bend 45 degreeel with flang fixing with 15 mm bore pipe ,complete all as specified and as directed.

S&F in repair's Stainless steel grating doom 100mm dia fixing in floor ,complete all as specified and as directed.

S&F in repair's CI soil waste and vent pipe of 100mm dia in any length with or without ears,with cement joints fixed in wall ,complete all as specified and as directed.

S&F in repair's bends 100mm dia disminishing pieces or taper ,complete all as specified and as directed.

S&F in repair's CI soil waste and vent pipe of 75 mm dia in any length with or without ears,with cement joints fixed in wall ,complete all as specified and as directed.

S&F in repair's bends 75mm dia disminishing pieces or taper ,complete all as specified and as directed.

Taking down CI pipes any langth , including all fittings,complete all as specified and as directed.

S&F in repair's kitchen sink made of stainless steel 1mm thick with plugs, washers and wastes; including bedding in cement mortar & providing cantilever brackets and west pipe, overall size 495mm x 420mm and bowl size 410mmx 330mm x160mm ,complete all as specified and as directed.

Demolition of cement concrete below or above ground level n.exc 15 cm thickness and removal of soil to outside MD land as directed by Engr-in-Charge

M&L for kota stone slab 20-25 mm thick in over cement screed base laid and jonted with gray cement slurry over screed bed 20mm thick cement mortor 1:4 mixed to match the shade of the slab including rubbing and polishing ,complete all as specified and as directed.

M&L for kota stone slab 20-25 mm thick as in vertical surface like riserof step,dado etc in over cement screed bed 1;4 base laid and jonted with gray cement slurry mixed to match the shade of the slab including rubbing and polishing ,complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor, etc laid dry or laid dry and pointed and removing of debries of M D land ,complete all as specified and as directed.

M&L for hardcore broken stone or boulder of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ,complete all as specified and as directed.

M&L for cement concret type D-2 1:4:8 (40mm graded stone aggregate) 100mm thick , as in sub base ,complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size conformed to IS 15658-2006 of 60mm thickness M-35 grade ,complete all as specified and as directed.

M&L for sand cushion filling for floor,foundation etc including watering and consolidation ,complete all as specified and as directed.

S&F in repair's Kitchen plate rack made of stainless steel not less than 1 mm thick with fixing acessories of size 600mm x 600mm x 250mm ,complete all as specified and as directed.

E/M Portion

Taking down carefully aluminium/copper conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing ,complete all as specified and as directed.

Material and labour for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. ,complete all as specified and as directed.

All as per item No.2.02 here-in-before but One 3 pin 5 Amps socket outlet points on independent board , complete all as specified and as directed.

All as per item No.2.02 here-in-before but 5 Amp socket on same board with other switches ,complete all as specified and as directed.

Material and labour for wiring for socket outlet on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR cable earth wire and connecting to earth dolly and brass screws, washers etc. ,complete all as specified and as directed.

Supply and fixed switch piano flush type, single pole , 5/6 Amps, one way ,complete all as specified and as directed.

Supply and fixed switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch ,complete all as specified and as directed.

S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V, complete all as specified and as directed. Note: For Same Board only

Supply and fix switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch , complete all as specified and as directed.

Supply & fix ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps ,complete all as specified and as directed.

Supply & fix stepped type electronic fan regulator flush type 240 Volts ISI marked ,complete all as specified and as directed.

Supply & fix Bell push , flush type , 5 amp ,complete all as specified and as directed.

Supply & fix Buzzer, Ding dong, AC 230 Volts, single pole 230 volts ,complete all as specified and as directed.

Supply & fix lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings ,complete all as specified and as directed.

Supply and fix in repair's two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified.

Supply and fixing Bldg security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and as directed.

Supply and fix in repair's 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection ,complete all as specified and as directed.

Supply and fix 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection ,complete all as specified and as directed.

Supply and fix Surface mounted type decorative light fitting 1 x 10W LED 6k 230V AC, 50Hz with all accessories, complete all as specified and as directed.

Supply and fix LED Bulb 15 Watt suitable for baten holder, complete all as specified and as directed.

Supply and fix in repair's bracket made out of galvanized tube 25mm dia bore (light grade) 1.0 meter long, and band as required,with MS clamps,nuts and boltswith two coat of red primer and one coat of sliver paint, complete all as specified and as directed.

Supply and fix in repair's epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact ,complete all as specified and as directed.

Supply and fix Vertical distribution board , double door, TPN 6 way with IP 54 multiphase outgoing suitable for mounting MCCB 100 Amps as incomer with Bus bars, Neutral links with all accessories , complete all as specified and as directed.

Supply and fix in repair's MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection, complete all as specified and as directed.

Supply and fix in repair's MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection ,complete all as specified and as directed.

Supply and fix MCCB of 4 pole , 415volts of capacity 100 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessry connection, complete all as specified and as directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and as directed and testing on completion.

Supply and fix in repair's service earth continuity conductor or main earthing lead of 4 mm dia GI earth lead with clamp, connection ,complete all as specified and as directed.

Supply & fix ceiling fan 1200mm size , star 5 rated, ISI mark, 240V, 50 Hz ,complete all as specified and as directed.

S&F Metallic ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size ,complete all as specified and as directed.

Taking down of AC ceiling fan of any sweep & any height and opening the fan and oiling, greasing and replacement of unserviceable accessories and servicing, complete overhauling and re-assembling and testing complete for efficient functioning and hanging it back in position including provn of 0.5 Sqmm copper flexible twin twisted cable (length not exceeding 0.5 metre) from ceiling rose to fan ,complete all as specified and as directed. Note : Accessories such as Capacitor shall be measured and paid under relavtive item here-in-after.

M&L for painting of ceiling fans upto 1400mm sweep carefully, dismantling fan blades and paint with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc ,complete all as specified and as directed.

Supply only capacitor 2.5 MFD ,complete all as specified and as directed.

Supply and fix Geyser 25 Ltrs including cold and hot connection pipe of 600mm long with accessories, complete all as specified and as directed

S&F in repair's rotational moulded polyethylene water storage tanks of 500 Ltrs Capacity (Cylindrical, vertical with closed top with three layered) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting, complete all as specified and as directed by Engineer in Charge .

Supply and fixing of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete including taking down old unserviceable float valve ,complete all as specified and as directed.

S&F in repair's 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe ,complete all as specified and as directed.

Supply & fix in repair's 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as specified and as directed.

Schedule of Credit

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

S. D. Construction Co.