GE/BAS-60/2025-26 Special repair to building No T-63, T-64, T-65 and P-83A at Janglote under GE Basoli

Amount

Excavation in trenches n exc 1.5 m wide and nexc 1.5 m in depth for foundation of pole/stay and laying of UG cable/GI pipe and getting out in any type of soil complete all as specified and directed.

M&L returning, filling and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5mtr above the starting point , complete all as specified and directed.

M&L TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed .

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.

Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter decorative type, of 30 mm size comprising of virgin polymer of K value 58-60 ,calcium carbonate and natural fibre and non toxic additives minimum compressive strenth 50 N/ sqmm ,modulas of elasticity 850 n/ mm2 and resistance to spred of flame of Class A cateegory with property of being termite /borer proof ,water /moisture proof and fire retardant . WPC to be Laminated with PVC foil of minimum 14 microns thick of approval design pasted with hot melt adhesive on both faces of shutter and fixing with stainless butt hinges of required size with neccessary full body threated star headed counter sunk s.s screw shall ,all as per direction of enginner In charge.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete of frame size 105 x 60 mm complete all as specified and directed .

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete of frame size 125 x 60 mm complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F For Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with sash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a) complete all as specified and directed.

S&F steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.

S&F For Powder coating aluminium window and ventilator shutters, side hung type without sash bars, with double side shutters wire gauged shutter & glass glazed shutter aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 No), hinges type B-21 100mm long (4 Nos) suitable handle (4 No), tower bolt (4 Nos) Incl 5mm thick Glass and GI Wire Mesh complete all as specified. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.) complete all as specified and directed.

S&F For Powder Coating aluminium single or double leaf door shutter in single or two panels with standered aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clilps,rubber neoprene packing , handles 2 Nos in each door hinges,powder coated snap beading screws etc in partition of partly glazed (5mm thick tinted) and partly prelaminated board 12mm thick (bothside) including locking arrangement, using following section of Jindal or equivalent make complete all as specified and directed by Engineer-in-Charge. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)

S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F For MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F for 100 mm butt hinges,Stainless steel complete all as specified and directed complete all as specified and directed.

S&F stainless steel barrel tower bolts 150 mm long of extruded section fixed with stainless steel screws, ISI marked, complete all as specified and directed.

S&F Stainless steel handle,150 mm size. complete all as specified and directed.

S&F aluminium alloy, anodised ,sliding door with hasp and size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed.

Supply & fixing 100mm size hasp and staple aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S & F floor stopper 150mm length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

Supply & fixing Windows/ ventilators fabricated from roll framed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.60mm incl painting, with Frame section 72mm x 55mm, Mullion section 72mm x 50mm, Shutter Frame 47mm x 20mm, incl 5mm plain/figured float glass and wire mesh,handle, lock and other accessories with powder coated guard bars Grill of size 10mm sq. MS Bars and 6mm x 12mm MS flat fixed using fasteners etc complete all as specified and directed. Make:ECO – 4000 Series Windows (Double Rebate) NCL Windoors, Tata, JSW or its equivalent.

S&F Aluminum door closer hydrulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg. complete all as specified and directed.

S& F mild steel Peg set of six hooks size 50mm to 60mm complete all as specified and directed.

M&L for preparation of treated/un-treated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and dispose off rubbish to a distance not exc 50m complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed .

Material and labour for plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M & L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg), top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed.

M&L for roof treatment with the following specification - Removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished. NOTE :- MOU to be submitted by the contractor beore starting of work with the authorised applicator by the OEM of APP membrane duly recommended by Engineer-in-charge

M&L For 15mm thick screed bed or bedding layer in CM 1:4 with Water proofing Compound at roof top surfaces for smoothening surface of laying APP Membrane complete all as specified and directed.(Note :- WPC shall be measured and paid separtely).

M&L For Preparation of Roof Surfaces and two coat of Aluminium Paint on APP Membrane of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

Supply and fixing for 18 to 20mm thick (weight not less than 10.5 Kg/Sqm) including magnetic catch PVC Unltra Violet chemical, glosymate finish 100% termite/water proof, fire retrandent eco friendly solid board both side decorative choice laminate as in kitchen cabinet, loft cupboard etc fixed with screws to steel/ timber frame work etc complete all as specified and directed by Engineer-in-Charge.

S & F continiuous (piano) hinges, mild steel, bright finish or electro galvanised width of flaps (when open) in 30mm complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F PVC (SWR) Bends in any radius 110 mm bore with access door in repair complete all as specified and directed.

S&F PVC (SWR) Bends in any radius 75 mm bore with access door in repair complete all as specified and directed.

S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed

S&F in repairs for 110mm dia bore PVC SWR branch piece single (Double Y) equal or unequal complete all as specified and directed.

S&F in repairs for 75mm dia bore PVC SWR branch piece single (Double Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) Vent cowl 110 mm bore in repair complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank, non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical tanks with closed top,specific wt shall be 25 gm/ltr), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank, non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical tanks with closed top,specific wt shall be 25 gm/ltr), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

S&F in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type long body with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and directed.

Supply and fixing Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partitions as per sample. The over all size (75x75x25cm) fixed with steel fastners or steel screw complete all as specified and directed .

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Sinks made of stainless steel 1 mm thick kitchen with plugs ,washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe overall size 495mm X 420 mm bowl size 410mm X 330mm X 160 mm all complete (sink to be fixed in granite after cutting the granite stone to required shape ) complete all as specified and directed.

S&F in Repair Stainless Steel Kitchen Sink with double bowl of overall size 1120mm x 460mm bowl size 410mm x 330mm x 160mm,1mm thickness with plug washers,and waste pipes, incl bedding in CM to drwaf wall or incl fixing cantilever brackets and connecting union to pipe complete all as specified and directed.

S&F in repair flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed. Cera Cat Part No: Congo B1010112 or equivalent in Jaquar/Prayag/ Kohler.

S&F in repair Vitreous china wash basin white , flat back size 300 X 300 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed

S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc, complete all as specified and directed. Cera Cat Part No: COVYNA S3010109 or equivalent in Jaquar/Prayag/Kohler.

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

Supply and fixing in repair stainless steel curtain rods 20mm dia powder coated with brackets, corner & fineals complete all as specified and directed.

Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete of any description complete all as specified and directed.

M&L for 75 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 10mm thick rendering/screeding on fair faces of brick/concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed.

M&L for cutting, grinding & polishing over terrazzo, marble/ kota stone flooring/ skirting/ dado etc., complete all as specified and directed.

M&L for Premium Quality Durastone / Endura heavy duty vitrified tiles of size 300 mm x 300 mm x 10mm to 12mm thick as in floors and skirting set and jointed in neat cement slurry and pointed in white cement to match the surface complete over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed .

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n . Exc 0.38 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L For Non-skid Ceramic tiles 8 to 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match includingTaking down cement plaster/tile on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles. complete all as specified and directed.

M&L for Machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes including Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

M&L for Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed

M&L Terra kota tiling 10mm thick set and jointed with grey cement with pigment and pointed with neat cement slurry in chajjas over 15mm thick screed bed in CM 1:4 over PCC coping 1:3:6 type C-1 (using 20mm graded agg) , complete all as specified and directed

M&L Granite of black Colour any type 20mm thick machine cut as in cooking plateforms and over 20 mm screed bed in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling Stone Slabs and Tiles of any description or thickness in floors, apron etc Laid bedded and pointed in any mortar. complete all as specified and directed.

Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform and other similar situations etc complete all as specified and directed.

M&L machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment over and including 50mm thick layer of sand filling complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6, on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement, preparation of new plastered surfaces of walls and applying 3mm thick wall care putty and two coat oil emulsion distemper on walls including taking down old cement plaster on walls complete all as specified and directed .

M&L for rendering 15mm thick in cement mortar 1:6, on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement, preparation of new plastered surfaces and applying three coats of white wash on walls including taking down old cement plaster on walls complete all as specified and directed .

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed

M&L For preparation of new Plastered surfaces and applying two coats of Acrylic emulsion ( Apex ) over a coat of primer/ wall putty complete all as specified and directed.

M&L For complete removal of existing treatment and preparation of old plastered surfaces and applying two coats of Acrylic emulsion ( Apex ) over a coat of primer/ wall putty complete all as specified and directed.

S&F in repair stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. complete all as specified and directed .

S&F long shank concealed type stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. complete all as specified and directed .

S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed.Cat Part No: F7020111AB or equivalent in Jaquar/Prayag/Kohler.

S&F CP Soap dish fancy type complete all as specified and directed.

M&L for concrete bed to drain pipes laid in trenches incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregates) for 150mm bore of pipe complete all as specified and directed

M&L for Reinforced concrete pipes150mm, class NP3, laid and jointed complete with collars bed complete incl testing all as specified (Concrete to be measured and paid for separately) complete all as specified and directed

M&L Cement concrete M-10 (Nominal mix), type C-2, 1:3:6, (using 40 mm graded crushed stone aggregates) in surface channel and drain etc complete all as specified and directed

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement including mixing of WPC complete all as specified and directed. (Note: WPC shall be measured and paid seperately as supply only}.

M&L for Reinforced cement concrete M-20 (Nominal mx) using 20mm graded crushed stone aggregates as in slabs/shelves, supported on walls, beam and columns in floors, and in shelves and the like complete all as specified and directed

M&L precast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in man hole covers set in cement mortar 1:6 including necessary form workcomplete all as specified and directed . (Note: Steel reinforcement shall be measured and paid for separately under respective items.)

M & L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed

M&L 75 mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement. complete all as specified and directed

M&L for rendering 5 mm thick in CM (1:3) finished surface even and smooth w/o using extra cement in ceiling. and applying three coats of white wash on ceiling complete all as specified and directed

M&L for preperation of old plastered surface and applying two coats of white wash on ceiling complete all as specified and directed

M&L for preperation of old plastered surface and applying two coats of white wash on wall complete all as specified and directed

Supply only integral Water Proofing Compound. complete all as specified and directed

M&L for complete removal of existing surfaces of walls and applying 1mm thick wall care putty and two coat oil emulsion distemper on walls complete all as specified and directed .

Taking down ,dismantling of broken/loose portion of chajja , facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (including white wash /colour wash or cement base paint) chajja upto 2nd floor complete all as specified and directed

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws Incl Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering complete all as specified and directed

M&L for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws Incl Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering complete all as specified and directed

Dismantling of ceiling asbestos cement board any thickness including cover fillites.complete all as specified and directed

S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips.complete all as specified and directed

Dismantling of wrought iron or mild steel work of any description not otherwise provided for. complete all as specified and directed

S&F For Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using FE 410-W (Gde-E-250) Quality A.complete all as specified and directed

Supply and laying for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade, of size 25 Sqmm, 4.00 core and taking down old/brunt out electric cable any size and rating complete all as specified and directed. Note: Earth work including excavation, returning filling, removing, sand cushioning, GI pipe,brick covering for mechanical protection of cable etc will be measured and paid separately under respective items of BOQ

Supply and laying for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade, of size 16 Sqmm, 2.00 core and taking down old/brunt out electric cable any size and rating complete all as specified and directed. Note: Earth work including excavation, returning filling, removing, sand cushioning, GI pipe,brick covering for mechanical protection of cable etc will be measured and paid separately under respective items of BOQ

Supply & laying of approved quality sand under cable upto 15cm before laying the cable and 8cm over the cable after laying, punned down to overall thickness of 18cm in trenches for cable cushioning complete all as specified and directed. (Punned thickness shall be measured)

Material and labour for well burnt, old size Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable with width equal to length of brick complete all as specified and directed .

Supply and laying in trenches/under roads/under floor/on walls in new position tubing GI Light grade of 40 mm nominal bore of pipe with screwed sockets joints (such as bends, elbow, tees, etc) complete all as specified and directed.

Suppy and fix gate valve 20mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipe complete all as specified and directed..

Suppy and fix gate valve 25mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipe complete all as specified and directed..

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in trenches including taking down existing galvanised iron pipe complete all as specified and directed

S&F of 25mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in trenches including taking down existing galvanised iron pipe complete all as specified and directed

Cutting and screwing existing steel tubing of 50 mm dia for alterations or addition complete all as specified and directed.

Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed.

M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) in and including PVC concealed conduit having thicknes 1.8mm with all fittings, pressed sunken box thickness of sheet not less than 2mm thick suitable for modular switches and sockets, including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping as required and making good disturbed surface area and white wash /colour wash to matching with the existing colour complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)(Make of 1.5 sqmm copper wire (b) Rate for cutting chases for conduit and flushing metal boxes including making good the distrubed wall deemed included in quoted rates. (c) Modular switchs ,sockets ,cover plates and all connected accessories shall be paid seperatly in respective items .

All as per item No 124 but for one bell/buzzer point controlled by one push button on the same board with other switch complete all as per specified and directed.

All as per item No 124 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed.

All as per item No 124 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed.

M & L for Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit with sunken box suitable for modular switches and sockets for 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour and complete all as specified and directed. Note : (a) Insulation test of point wiring (b) colour coding is to be maintained (Ph-Red, N-Black,Earth- Green).

M & L for flame proof point wiring with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable 1100 volts grade drawn through in and including metallic rigid steel concealed conduit with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable 1100 volts as earth continutiy wire terminated in flame proof bend ,elbow etc complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)(Make of 1.5 sqmm copper wire (b) Rate for cutting chases for steel including making good the distrubed wall deemed included in quoted rates.

Supply and fixing LED light fittings 1 x 30 watt flame proof ,CMRI certified recommended for gas /vapour group of IIA & IIIB ,Zone 1 & 2 and IP-65 protection with die cast aluminium housing with heat resistant toughened glass ,with LED light fixtures driver ,holder connector etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing for Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

S&F modular switches one way 6 amps one module complete all as specified and directed .

S&F modular switches one way 16 amps with indicator one module complete all as specified and directed .

S&F modular socketes out let 6 amps 5 pin shuttered socket2 module complete all as specified and directed.

S&F modular socket outlet 16 amps, 3 Pin Shuttered Socket, 2 module complete all as specified and directed

S&F modular white cover platewith frame 8 modular complete all as specifed and directed.

S&F modular white cover platewith frame 6 modular complete all as specifed and directed.

S&F modular white cover platewith frame 3 modular complete all as specifed and directed.

S&F modular white cover platewith frame 2 modular complete all as specifed and directed.

Supplying&Fixing modular Bell push, 6 amp two module complete all as specifed and directed.

S&F modular fan step regulator,120 W two module complete all as specified directed.

Supply and fixing hook with clamp and nut ,bolt for hanging of ceiling fan of 1200/1400 mmm sweep complete all as specified and directed.

S & F for lamp holder/batton holder/angle holder insulated body(Metal ring) with bakelite back plate suitable for batten fittings complete all as specified and directed.

S&F in replacement electric bell ding dong AC single phase 220 volts, complete all as specified and directed

S&F ceiling rose surface 65x50mm three terminal with bakelite back plate complete all as specified and directed.

Supply and fixing of Environmental friendly, ultra modern, pre die cast aluminium housing ,energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs. suitable for 10W IP-66 of make : Havells ,cat part no :HEXAFT10WLED857SSYMBOPC/Crompton, cat part no : CIS-306-10-57-SL-DP-NBK/Orient ,cat part no :LIBHP-10-C-V1 complete all as specified and directed.

Supply and fixing LED light fitting mirror type Surface mounting General Purpose LED Battens in Extruded Aluminium housing with suite variety of application areas with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete of Make : Havells, cat part no: LUMILINEPLUSBS10WLED865SPCSSIND/Crompton ,cat part no : TCS-108-10-65-SL-DP-NWH/of make Orient ,cat part no: LBLN-10-C-SQ complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose of make : Philips ,cat part No :BN170C LED20S-6500 PSU L120 /Havells ,Cat part no : LUMILINEPLUSNEOBS20WLED865SPCSSIND/Crompton ,cat part no : CCS-100-20-65-HL2-DP-NWH/ Orient ,cat part no :LBLN-20-C-SQ-AL complete all as specified and directed by the Engr-in-charge.

Taking down old /unserviceable ceiling light any type and rating and Supply and fixing ultra modern recess mounting luminarie suitable for armstrong/grid/POP ceiling of auditorium complete with separate electronic driver and high brightness SMD LEDs suitable for 36 watts LED ,5700K ,of fixture size 595x595 mm of Make: Crompton part No. LCTLRNE-36-FO-CDL/Phillips, cat Part No: RC383B LED 28S-6500 PSU OD WH PIR/Bajaj,Cat Part No.: BZRSQL 43L LED GX PRO WH complete all as specified and directed .

S&F for LED Bldg security lights of 35 Watt. 230 V having pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W IP65 protection, IK07 rating, inbuilt electronic driver with PF>0.95 incl Gl bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable . Make of street light fitting - Bajaj, cat part no :ENXT P 35L WH PO PC SD/Havells ,cat part no :ENDURASUNDOWNSL35WLED765PASYBOPC/Wipro ,cat part no : LR08-501-XXX-57-XX/Crompton ,cat part no : TRP-400-35-57-SL-LM-NSR complete all as specified and directed.

M&L for SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed.

S&F MCB SP 6-32 Amps with 10KA breaking capacity of 'B' series in distribution board complete all as per specified and directed.

S&F in replacement MCBs single pole and neutral (SPN)/isolator 40 Amps with 10 KA breaking capacity of 'B' series in distribution boards complete all as specified and directed.

S&F in replacement sheet metal powder enclosure powder coated versatile double door Triple pole and neutral (TPN) distribution board for MCB provisions 415Volt, 50Hz AC supply for 04 way. fitted with copper bus bar rated 200amps, neutral link , earth bar complete all as specified. and directed.

Supply and fixing in repair/replacement MCB, TPN 415 volts, 63 Amps ,(Ics=100%Ics)capacity complete all as specified. and directed.

S&F sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as per specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire .)

Ashoka Engineers (BID ID -3430149)

KHOSLA ENGINEERS BUILDERS (BID ID -3430148)

Standard engineers (BID ID -3430111)

MANOTRA BUILDER (BID ID -3429574)