REPAIR MAINT OF INTERNAL ELECTRIFICATION WORK INCL REPLACEMENT OF UNSV WIRING DBs

Amount

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing all as specified and directed.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall/Surface on wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for One light / bell / buzzer point controlled by one, one way switch 06 Amps.

All as per srl item No 02 here-in-before but Point wiring surface on wall for One light / bell / buzzer point controlled by one, one way switch 06 Amps.

All as per srl item No 02 here-in-before but one fan point controlled by one, one way switch 06 Amps.

All as per srl item No 02 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch.

All as per srl item No 03 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch.

All as per srl item No 02 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch.

All as per Serial Item No 02 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

All as per Serial Item No 03 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

Supply & fixing switch piano flush type, 06 Amps, single pole, one way, 250 volts complete all as specified & directed.

Supply & fixing bell push, flush type, 06 Amps, 250 volts with switch frame complete all as specified & directed.

Supply & fixing switch piano flush type, 16 Amps, single pole, one way, 250 volts with switch frame complete all as specified & directed.

Supply & fixing socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 250 volts with socket frame complete all as specified & directed.

Supply & fixing socket outlet 2 in 1, 3 pin, 06 Amps and 3 pin, 16 Amps, flush type, 250 volts with socket frame complete all as specified & directed.

Supply and fixing in repair ding dong bell, AC, 230 volts, single pole complete all as specified & directed.

Supply and fixing ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, socket type, humfree, AC, 230 volts, 100 watts, duly ISI marked with and including white surround complete all as specified & directed.

Supply and fixing ceiling rose, 6 Amps, 250 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified & directed.

Supply and fixing lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting including 7W LED bulb complete all as specified & directed.

Supply and fixing LED bulb 9W inverter type upto 4 hrs back up, 6500K and remove the UNSV bulb and all as specified and directed.

S&F in repair 5W LED T5 TL fitting (1 fit) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete.

S&F in repair 10/12W LED T5 TL fitting (2 fit) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete.

Supply and fixing in repair on wall / ceiling LED batten lighting fixture 20 watts LED 6500K (4'), with Polycarbonate housing and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block, including taking down of existing u/s light fitting complete all as specified and directed.

Supply and fixing in repair on wall / ceiling LED batten lighting fixture 20 watts LED 4000K (4'), with Polycarbonate housing and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block, including taking down of existing u/s light fitting complete all as specified and directed.

Supply and fix LED crystal glass tube 20 Watt light double side connection ultra bright with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders.

Supply and fixing in repair on wall energy saving, eco friendly LED bulk head fitting 10Watt, IP 65surface mounted with ABS body & polycarbonate diffuser, etc and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete all as directed

Supply and fixing in repair decorative wall mounting light fixture with textruded glass difuser suitable for up to 40 watt mini glass lamp, lamp holder, including 9 Watts LED bulb of 6500 K of B22 base cap and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete all as specified and directed.

Supply and fixing in repair 12 Watt round LED panel recess mounting downlight in 4000K with integraed driver to delivered superior light output and uniformity utilising the latest LED technology, ceiling cutout 145mm mm dia hight max 35mm recess luuminaries all as specified and directed.

Supply and fixing in repair ultra bright compact 6 Watt round LED downlighter with high efficiency LED,s idealy suited for low ceiling areas to give glare light IP-54 in 4000K with integraed driver to delivered superior light output and uniformity utilising the latest LED technology, ceiling cutout 95 mm mm dia hight max 83 mm recess luuminaries all as specified and directed.

Taking down of existing u/s recess light fitting and supply & fixing recess mounting 36 Watts in natural white, 2x2 LED flat panel complete with envornmental friendly, ultra modern recess mounting luminaries with high brightness SMD LEDs as light source suitable for ceilings high etc including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as directed

Taking down of existing u/s Post top light fitting and supply & fixing new generation post top, energy saving envornment friendly long life aesthetically design with symetrical light distribution, spun alluminium landscape luminaire with high power 15 Watt LEDs as light source suitable size medium grade galvanized iron pipe up to length of 0.5 Mtrs and necessry plain cement concrete (1:3:6) type CI (using 20mm graded aggregate) as in copings incl necessary form work complete all as specified & directed by Engr-in-charge.

Taking down of existing u/s highbay lights and Supply and fixing in repair energy saving flood light 150 watts LED 5700K die-cast aluminium IP 66 flood light with high power LEDs as light source, comprising with electronic driver and all accessories complete, arrangements for mounting of fitting i.e. bracket, clamps, nuts, bolts and washers etc all as per site requirement including connecting up with provision of PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections complete all as directed.

Supply and fixing in repair energy saving security light fitting of 45 watts LED environmental friendly pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 40 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two SC, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

All as per srl item No 32 here-in-before but for 02x04 Sqmm for phase & neutral and 01x 2.5 Sqmm for continuous earth wire.

M & L for connecting cable from looping box/ junction box with two single core PVC insulated cable with 1.5 Sqmm (Nominal area) multi stranded copper conductor cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 1.5 Sqmm connected to common earth dolly and drawing into rigid PVC conduit incl. making good the disturbed surfaces complete.(Note : PVC conduit and its accessories including 2 runs of cable & 1 run of earth continuity conductor cable unsheathed shall be measured and paid as single unit).

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fixing in repair sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed.

Supply and fixing in repair sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 04 ways with 200 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed and comprising of the following:-

Supply and fixing in repair MCB, SP, AC, 240 volts of 06 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fixing in repair MCB, DP, AC, 240 volts of 40 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fixing in repair MCB, DP, AC, 240 volts of 63 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and fixing Ventilating fan wall mounted type of 250 mm sweep, 240 volts, AC, 50 Hz capacity, cutting of hole in wall, making of wooden frome, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed by Engineer - in - charge.

Supply and fixing Ventilating fan wall mounted type of 200 mm sweep, 240 volts, AC, 50 Hz capacity, cutting of hole in wall, making of wooden frome, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed by Engineer - in - charge.

Supply & fixing in repair MCCB, 400 Amps, 04 pole, AC, 415 Volts of 36 KA breaking capacity complete all as specified & directed.

Supply & fixing in repair MCCB, 125 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed.

Supply & fixing in repair MCCB, 100 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed.

Supply and fixing or passing through pipe, 10 Sqmm, 2 core, 1100 Volts grade, heavy duty, multi-stranded, PVC insulated, aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed service cable for service connections from existing LT Panel/Pole to DB/busbar chamber including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Taking down carefully existing electric meter any type any make after disconnecting the electric connections and refixing with and including new Polycarbonate thermoplastic meter box with transparent hinged lid with sealing provision, internally embedded gasket of size 217 x 253 x 115 mm suitable to accommodate single phase KWH meter and connecting up including making good the disturbed surfaces all as directed by Engineer - in - charge.

Supply & fixing in repair switch piano flush type, 06 Amps, single pole, one way, 250 volts complete all as specified & directed.

Supply & fixing bell push, flush type, 06 Amps, 250 volts with switch frame complete all as specified & directed.

Supply & fixing in repair switch piano flush type, 16 Amps, single pole, one way, 250 volts with switch frame complete all as specified & directed.

Supply & fixing socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 250 volts with socket frame complete all as specified & directed.

Supply & fixing in repair socket outlet 2 in 1, 3 pin, 06 Amps and 3 pin, 16 Amps, flush type, 250 volts with socket frame complete all as specified & directed.

Supply and fixing in repair ding dong bell, AC, 230 volts, single pole complete all as specified & directed.

Supply and fixing in repair ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, socket type, humfree, AC, 230 volts, 100 watts, duly ISI marked with and including white surround complete all as specified & directed.

Supply and fixing in repair lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.

S&F electronic energy meter current rating 10-60 amps, 3x240 V, 50Hz, AC, three phase, four wire, LCD display, Class 1.0 accuracy (PPEM 01) in built CT operated as per IS-13779, made out of FR polycarbonate, dust proof, good mechanical strength incl connection and depositing old meter to MES store complete all as directed

S&F electronic energy meter current rating 10-60 amps, 240 V, 50Hz, AC, single phase, two wire, LCD display, Class 1.0 accuracy (SPEM 36) as per IS-13779, made out of FR polycarbonate, dust proof, good mechanical strength incl connection and depositing old meter to MES store complete all as directed

S&F in repair of 3mm thick plastic laminated sheet cover with brass screws , cup wahser and cutting of grooves for switchs,scoket and regulator etc complete for following sizes.

S&F, testing and commissioning of common area lighting panel for high rise buildings, with contactor, analog time switch, MCB rating 40 A suitable for 3 Phase 415 Volts and having over and under voltage protecction relay to protect the contactor coil, with panel locking facility, wall mounted type incl necessary cable lugs, necessary copper wirinng to connect exist TPN DB with remove UNSV DB/panel complete all as specified and directed.

S&F in reapirs of garden light fitting 10 watts, IP65 rated Inverted Pyramid Tripod type LED Bollard with soft 360 deg light distribution with tapping from nearest electrical point incl provn of copper wire, PVC conduit,necessary brick/PCC work finishing with fair cement for base fitting all as specified and directed.

S&F for LED Based Outdoor Weatherproof Aviation Obstruction Lighting Luminaire wiith Inbuilt AC-DC Converter 48V / 160 – 230 VAC Housed in Die-Cast Aluminium (LM 6) / Aviation Orange Finish Ultra Violet Stabilised Acrylic Lens for directing light Built in Photo Controller / Built in SS Bird Spike Solid State high flux Light Emitting Diode / Intensity: 32.5 Candelas Life: >50000 Hrs / Sealed with EPDM Gasket Power Supply: AC-DC Converter 48V / 160 – 230 VAC Standards: Confirms to ICAO Annex 14-6, FAA AC No. 70/7460-IG, Radio Interference: BS 800/EN 55014 Connections, necessary welding, clamping,mounting with 32mm dia GI pipe, 1.2 mtr height,1.5 sqmm copper wire with 20mm PVC conduit fixing on work portions upto nine storeys height bldg incl taking down UNSV complete all as specified and directed.(Make: ITPC AOL30/ Inpocon Aviator/ Kratos)

"M&L for servicing, descaling with descaling agents (chemical solvents) for removing all silt/ rust of the solar water heater 500/ 300 LPD capacity solar water heating system and making good any leakages, cutting/ brazing of copper tubings, replacement of gaskets and minor spares/ parts for functioning of complete system (rubber gaskets 63mm dia, flange brass dia 63mm, hose clamps of suitable size, flange pieces, glass rubber beedings with nut, bolts and if any minor spares etc required) including testing complete all as specified and directed [Note :- (a) Rates of spares/ parts as mentioned above and any civil work for MS structure base fixing complete, are deemed to be included in the quoted rate. (b) Replacement of copper tubing of size 12.5mm to 20mm dia will be measured and paid seperately. (c) Contractor or his rep will attend & rectify the complaints with material and labour within 24 Hrs of intimation of breakdown/ complaint. In case the contractor or his rep will not rectify the complaints within 24 Hrs, a penalty of Rs 600/- per Job/ 24 Hrs shall be imposed to the contractor and shall be deducted from his dues.]"

M&L for hose pipe (EPDM) size 25mm inner dia and 36mm outer dia suitable for solar hot water system incl taking down unsv complete all as specified and directed.

M&L for toughened glass 2000 mm x 1000 mm suitable thickness as exist size ISI marked suitable for solar hot water system incl taking down unsv complete all as specified and directed.

M&L for solar plate collector flat type of capacity 100 ltrs, ISI marked incl cover plate, collector box, absorber, suitable insulation incl taking down unsv complete all as specified and directed.

M&L for cylindrical type hot water tank of capacity 500 ltrs made of stainless steel sheet 1mm thick including insulation with PUF 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thsick sheet incl taking down unsv complete all as specified and directed.

M&L for cylindrical type hot water tank of capacity 300 ltrs made of stainless steel sheet 1mm thick including insulation with PUF 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thick sheet incl taking down unsv complete all as specified and directed.

M&L for taking down hot water tank 300/500 ltrs capacity and replacement of PUF insulation 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thick sheet and refixing the same complete all as specified and directed.

M&L for temparature gauge ISI marked dial type haveing range 0 to 100 ºC incl taking down unsv complete all as specified and directed.

M&L for water make up tank of 15 ltrs capacity made of 1.6mm thick mild steel sheet, painting 2 coats of synthetic enamel paint surface & inner surface shall be painted with 02 coat of black bituminous paint incl taking down unsv complete all as specified and directed.

M&L for PVC ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, ISI marked,15mm bore complete assembly screwed for iron pipe and fixed and taking out UNSV complete all specified and directed.

M&L for lagging to hot water pipes all round with nitryl rubber insulation 9mm thick with 26 SWG aluminium cladding system only for open surface 15 to 32mm bore pipe work portion upto eight storeys height high rise bldgs and conforming to IS 9842 complete incl taking down unsv complete all as specified and directed.

M&L for MS angle iron,flats,plates,clamps including nuts,bolts,washers, welding,bending,drilling holes for bolts in any shape or size as indicated or directed of making staging of the hot water tank and applying two coats of aluminium paint over a coat of red oxide zinc chrome primer including preparation of steel surface including taking down old unserviceable one complete all as specified and directed.

Supply and laying galvanised steel water tubing medium grade 15mm bore ISI marked screwed socketed joints complete with all tube fitting (such as bends,elbow,tees,short pieces,connectors,caps,plugs and unions,etc) and fixing complete with clips,wall hookswooden plugs,etc.,also cutting,screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting complete all as specified and directed.(Note:- laying of pipe line on wall/floors/terrace of high raise buildings up to the 8 th floor by using with suitable clamps, jointing material and necessary accessories and T&P complete necessary arrangement like scaffolding to carry out the work).

All as per above item but 20 mm dia.

Supply and fixing gunmetal gate valve 15mm dia screwed down high pressure with iron wheel head ,screwed both ends for iron pipe including taking out unserviceable valve complete all as specified and directed.

All as per above item but 20 mm dia.

Supply and laying galvanised steel water tubing medium grade 50mm bore ISI marked screwed socketed joints complete with all tube fitting (such as bends,elbow,tees,short pieces,connectors,caps,plugs and unions,etc) and fixing complete with clips,wall hookswooden plugs,etc.,also cutting,screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting complete all as specified and directed.(Note:- laying of pipe line on wall/floors/terrace of high raise buildings up to the 8 th floor by using with suitable clamps, jointing material and necessary accessories and T&P complete necessary arrangement like scaffolding to carry out the work).

Supply and fixing gunmetal gate valve 50mm dia screwed down high pressure with iron wheel head ,screwed both ends for iron pipe including taking out unserviceable valve complete all as specified and directed.

Supply and fixing in repair of 300mm dia, 900 RPM, exhaust fan, heavy duty with louver shutter, frame, blades complete and unsv Ex fan depositing in E/M store yard all as directed

Supply and fixing in repair 15Watt round LED panel recess mounting downlight in 5700K with integraed driver to delivered superior light output and uniformity utilising the latest LED technology, ceiling cutout 145mm mm dia hight max 35mm recess luuminaries all as specified and directed.

"Supply and fixing in repair for copper tubing 12.5mm to 15mm dia for solar hot water system incl taking down unsv complete all as specified & directed"

"Supply and fixing in repair for copper tubing 20mm dia for solar hot water system incl taking down unsv complete all as specified & directed"

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - Rs. 119795.00

The new hut furnitures

M/s Krishna Construction Co.

V M CONSTRUCTION

Shiv Enterprises