REPAIR TO INTERLOCKING TILES CHEQUERED TILE OUTDOOR TILE OPEN DRAIN FENCING AT VARIOUS PLACES IN THE AREA OF AGE BR II UNDER GE EAST DELHI CANTT 10

Amount

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified.

Excavating in post holes ( or similar holes ) each n.exc 0.5 cum in soft /loose soil getting out ,returing filling in and ramming around in layers not excedding 25 cm complete all as specified

M & L for removing excavated soils exc. 500m n.exc 1.5 km complete all as specified.

Dismantling of Barbed wire galvanised 2 strand of any type and at any place fixed to wooden members steel or RCC post complete all as specified & directed.

M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified.

M & L for Brickwork with subclass‘B’ bricks, straightor curved on plan to any radius in half brick thickwalls built in CM 1:4 including demolition of existing brickwork, complete all as specified.

M & L for brick work with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of existing brickwork, complete all as specified.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe .290.Gde-E-165 complete all as specified.

S & F for 0.80mm thick mild steel, plain & black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles as required including dismantling the cold sheet as required complete all as specified

Expanded metal weight n .exc 4 kg/sqm , cut to length, Bent to shape required incl welding and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified.

S&F Galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails strain-ing bolts,including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins , etc, as directed (each line wire to be measured) complete all as specified.

S & F for 2mm thick fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc.including dismantling of old sheet complete all as specified.

S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, with self tapping screws including dismantling of old sheet complete all as specified.

18 to 20mm thick granite slab (table rubbed and polished) as in steps, jambs, pillars, window cills cooking platform and the like, bedded and jointed in cement mortar 1:4 and pointed with white cement with admixture of pigment to match with shape of Granite laid over bedding layer of 15mm thick cement mortar 1:4 including demolition of old stone slabs and tiles of any description, complete all as specified and as directed.

M&L 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in mass concreting/subbase Complete all as specified.

M&L 75mm thick cement concrete 1:3:6 type B2 using 40mm graded stone aggregate as in plinth/sub base. Complete all as specified.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand

M&L for coloured chequered Cement concret tile glazed finish 30cmx30cmx2.5cm ,machine pressed; set jointed and pointed in neat cement slurry in floors, with grey cement and pigments laid over 15 mm thick screed be in CM 1:6 complete all as specified.

M & L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces (Cement plaster 1:4) finished even and smooth without using extra cement

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:4) finished even and smooth without using extra cement

M & L preparing new plastered or unplastered surface of walls and applying 2 coats of white wash as on walls.

M & L preparation of new steel surface and apply two coatsof synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling posts or struts (wood,steel, or RCC) any section, incl taking out embedded portion & making good disturbed ground,post embedded in concrete , brick work, masonary etc.

Demolition of cement concrete in ground floors of any description and in any position not otherwise specifically provided (un reinforced) complete all as specified.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete

M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills,seismic and other similar bands, plinth courses, copings,Bed blocks,and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified.

M & L for providing precast cement concrete 1:2:4 type B0 using 12.5mm graded aggregate louvres and jallies, 40mm thick (measured solid), including all mouldings set in CM 1:4 complete all as specified

Dismantling of RCC Jalli of any description and in position and unserviceable Jalli removed from site and serviceable RCC Jalli stactaking at site after cleaning/dusting for fixing the same as directed by Engineer in Charge.

S&F of Concertina coil 900mm dia (in stretched position) hot dip galvanized steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips (18 SWG) fixed over barbed wire with angle iron including tying concertina coil with barbed wire at points wherever coil toucheds the bottom of barbed wire with the help of hog rings (14 SWG) complete all as specified and directed (Barbed wire and angle iron shall be measured and paid separately) Note: Hogging shall be fixed at a interval of 600mm c/c wherever it touches with the barbed wire and overlapping of concertina coil and Barbed wire shall be 300mm. It shall be deemed to be included in the unit rate.

S&F Precast RCC coping /post of size 600x100x50mm suitable for fixing of RCC jalli in vertically and horizontally incl necessary moulds and grooves as reqd shape and size complete all as specified and directed.

M&L Marble work (Udaipur green) 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade incl moulding the edges etc includind dismantling of old slab complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Stainless steel letter,comma,dash ,logo etc of 300mm height and 32mm depth made of 1mm thick stainless sheet with seemless welding rubbed, polished and edges made smooth with necessary fixing devices complete all as specified and directed by Engr in charge

S&F, Aluminium composite panel sheet 3mm thick of approved make joint with cilicon/adhesive as per manufacturer instrction incl with necessary MS framed work as required shape and sized by welding etc in ceiling/coloumns and in vertical surface complete all as specified and directed. Note : 1. MS framed work shall be measured and paid separately. 2. Colour and pattern of Sheet will be appoved by GE 3.The rates of necessary scafolding and working platform is included in quoted rate and work is to be carried at approximate 4mtr height.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

M & L for OUT DOOR coloured ceramic tiles 8 to 9 mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified MAKE-ENDURA BY NITCO OR EQUIVALENT

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F for Mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt weldedtubes conforming to I. S.1161- 1979 grade St.-240 including cutting etc complete all as specified. including dismantling of existing truss.

M & L Cement concrete type B-2 1:2:4 ( 40mm graded stone agregates) in surface channels and drains, complete all as specified and directed vy Eng-in-charge.

Vipul Construction (BID ID -3220573)

imran construction company (BID ID -3220560)

Singh Associates (BID ID -3217141)

M/S Chhavi Constructions Co (BID ID -3220857)

A R construction (BID ID -3220522)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3220005)

tarun construction co (BID ID -3218729)

M/S Rohit Enterprises (BID ID -3220489)

M/s. Kansal Construction Co. (BID ID -3220449)