Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.5 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹41.0 L+₹25,475.50 (0.63%)Rejected-AOC | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹42.0 L+₹1.3 L (3.22%)Rejected-AOC HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹42.8 L+₹2.1 L (5.17%)Rejected-AOC H NO 400 FLAT NO 13 A SEMATILLA DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹44.9 L+₹4.2 L (10.3%)Rejected-AOC | L5 | Rejected-AOC Higher bid value |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
17 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
REPAIR MAINT OF BR WKS IN BLDGS OF GROUP III UNITS LOC UNDER AGE BR I AT RMS
2023_MES_597398_1
8528/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹80,000
21 Jun 2023
22 May 2023
19 Jun 2023
22 May 2023
17 Jun 2023
5 Jun 2023
22 May 2023 - 29 May 2023
Amount
Dismantling Asbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering complete all as specified and directed by Engr-in-Charge.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.
S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S & F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Eng-in-Charge.
Disamantling wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets complete all as specified and directed by Engr-in-Charge.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) non asbestos fibre cement reinforced multipurpose board, pre-primetered self embossed, textured designer board E-Board Classic fixed or laid/inserted to timber/ GI frame work with screws to be fixed in ceiling flat or sloping and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre both ways, size of grid 605 x 605mm fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified.
S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed by Engr-in-Charge.
M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed by Engr-in-Charge.
M&L for second class hardwood plain fillets exc 13sqcm and not exc. 25sqcm, square or rectangular in section, wrought, secured with nails or brads etc complete all as specified and directed.
S & F in repairs 12mm Prelaminatd particle board, interior grade, prelaminated on both sides with decorative choice lamination , fixed with screws (fixing in existing alu door shutter) etc complete all as specified and directed.
M&L for prelaminated particle board 19mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination as in pelmet boxes or in narrow widths not exceeding 15 cm each, rebated or flat edged including 6mm thick teak wood lipping allround etc complete all as specified and directed.
Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excl ashlar facing etc complete all as specified and directed.
M&L for brick work with sub class B bricks straight or curved on plan exc 6 m mean radius in CM 1:6 etc complete all as specified and directed.
M&L for brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and directed.
Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.
Demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing complete all as specified and directed by Engr-in-Charge.
M&L for GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and directed by Engr-in-Charge.
M&L 10 mm thick plastering in CM 1:6 on the other side of lathing finished even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:4 using water proofing compound @ 3% by wt of cement surface finished even and smooth (without using extra cement) (WPC will be measured and paid separately) etc complete all as specified and directed.
Supply only Integral water proofing compound etc complete all as specified and directed.
M&L for prepration of new plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer over 1.5mm thick of wall care putty on wall surfaces complete all as specified and directed.
M&L for applying two coats of oil bound distemper over a coat of primer on new plastered surfaces of walls including preparation of surface complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer of approved shade on walls all as specified & directed by Engineer-in-Charge
M&L for Preparation of old decorated plastered surface of any description and applying one coat of plastic emulsion paint complete all as specified and as directed.
M&L for complete removal of exisitng treatment of old decorated surfaces of wall applying two coats of oil emulsion distemper over a coat of primer over a coat of wall care putty(1.5mm thick) to achieve smoothness of wall surfaces complete all as specified and directed.
Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded agg in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
M&L for cement concrete type C2 1:3:6 (40 mm graded agg) as in surface channels and drains etc complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds etc complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping including necessary formwork complete all as spfd and directed
M & L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes etc complete all as specified and directed.
M & L for chequered cement concrete tiles of Size 25mm thick any description jointed and pointed in neat cement slurry in floors with grey cement and pigment etc complete all as specified and directed.
M & L for PCC 1:4:8 type D-2, 100 mm thick (using 40 mm graded stone aggregate) as in hardstanding etc complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed.
M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&Lfor Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
All as per item No 38 here-in-before but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat etc complete all as specified and directed.
M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 300mm X 200mm X 7-8mm thick as in dado/skirting set and jointed in neat cement slurry and pointed in matching pigment over and including 10mm thick CM (1:4) backing coat etc complete all as specified and directed.
Dismantling timber scantlings unframed work 40 sqcm and over in section in any position complete all as specified and directed.
M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid, jointed with grey cement and no pigment complete all as specified including preperation of formation bed over 25 mm thick sand cusion and pointed in colour cement mortar 1:3 etc complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description etc complete all as specified and directed.
S&F 2nd class hard wood scantling as in purlins rafters & framed work etc clean sawn complete all as specified and directed.
S&F for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated confirming Fe 410-W (Gde-E- 250) quality- A etc complete all as specified and directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specified and directed.
S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde-E- 250) quality-B etc complete all as specified and directed.
S&F steel work in tubular trusses, post, purlins including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 complete all as specified and directed by Engineer - in – Charge
Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specifed and directed.
Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specifed and directed.
Taking down shutter not exceeding 1 Sqm each
Taking down shutter of any description exceeding 1.0 Sqm but nexc 2Sqm each etc complete all as specified and directed.
S&F anodised aluminium powder coated any colour frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified etc complete all as specified and directed.
S&F for anodised aluminium powder coated any colour window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.
S&F for anodised aluminium powder coated any colour door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw etc.complete all as specified.
S&F Sheet glass 4.8mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane etc complete all as specified and directed.
S & F for 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple etc complete all as specified and directed.
M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and directed.
S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed.
M&L for Granite (of any type) tiles 18-20mm as in platform thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with nosing laid over 10 mm screed bed in CM 1:4 complete all as directed by Engr-in-Charge.
M&L for 35 mm thick 2nd class hardwood factory made plain framed Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated ,supplied and fitted to chowkats complete all as specified and directed.
M/L 35mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified.
M/L 30mm thick 2nd class hard wood factory made Glazed and skelton window and ventilator shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified.
M/L 30mm thick 2nd class hard wood Glazed and skelton window and ventilator shutter, open rebated and prepared to receive glass, gauge etc. with plain chamfered or rounded, mitred and rebated without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified.
S & F,Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification and drawing complete all as specified and directed.
S&F for steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded etc complete all as specified and directed.
All as per item No 70 here-in-before but without glazing bars
S&F for steel ventilator with top hung shutter including hinges, steel peg stay etc complete all as specified and directed.
S&F Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and directed.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc complete all as specified and directed.
M&L for PCC type B-0, 1:2:4 using12.5 mm graded stone aggregates as in bands, bed blocks, fixing hold fasts, filling of door frames etc complete incl necessary formwork etc complete all as specified and directed..
S&F for mild steel conforming to Fe 410-0 or Fe 310-0 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; hand made sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles etc complete all as specified and directed.
S & F guard bars to windows, plain, let in and fixed independently in steel frames including welding etc guard bars and similar work conforming to Fe-290 Grade E-165 etc complete all as specified and directed.
M & L for 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cup board shutters, partitions, shelves and similar work with teak wood beading at the edges complete all as specified and as directed.
S&F 40mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised etc complete all as specified and directed.
M&L butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm long size etc complete all as specified and directed.
M&L butt hinges, medium weight 75 mm long size etc complete all as specified and directed.
S&F Butt hinges, medium weight, cold rolled mild steel, 50mm size etc complete all as specified and directed.
S&F continuous (Piano) hinges mild steel 30 mm width bright finish or electro galvanised etc complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long etc complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long etc complete all as specified and directed.
S&F 150mm long aluminum hook and eye, complete all as specifed and directed.
S&F Aluminium handle cast type anodised 150 mm long etc complete all as specified and directed.
S&F 125mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed.
S/F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long) etc complete all as specified and directed.
S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete specified and directed
S&F Aluminium, anodised, barrel tower bolt 150mm long of extruded section and fixed etc complete all as specified and directed.
S&F 40 mm cupboards knobs fixed with nut screw and washer of mild steel, bright finished etc complete all as specified and directed.
S&F Extruded aluminum alloy handles, fabricated type, anodised 100 mm size etc complete all as specified and directed.
S&F in repairs Mortice lock,vertical type Brass 2 levers, size 100 mm etc complete all as specified and directed.
S&F in repairs Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws 100mm size etc complete all as specified and directed.
S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. fixed in repairs etc complete all as specified and directed.
S&F in repair for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F in repair floor door stopper overall length of cover plate 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and directed.
M&L for double action floor spring hydraulically regulated made upof minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stain less steel sheet cover governing pivot made of brass other parts made of mild steel heavyduty and fixed etc complete all as specified and directed.
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work etc complete all as specified and directed.
Dismantling boarding any description fixed in any position with nails complete all as specified and directed.
M & L for 25mm thick second class hard wood boarding , plained one side with butt joints as in eaves boards complete all as specified and directed.
M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified & directed
Taking up or down steel tubing and connections with all fittings for 15 mm bore GI tubing etc complete all as specified and directed.
Taking up or down steel tubing and connections with all fittings for 20 mm bore GI tubing etc complete all as specified and directed.
Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing etc complete all as specified and directed.
Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing etc complete all as specified and directed.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore etc complete all as specified and directed.
S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore etc complete all as specified and directed.
Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and directed.
S & F in repairs vitreous china bowl urinal flat back size of 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed.
S&F in repairs vitreous china squatting pan 'orissa' pattern size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe)complete all as specified and directed.
S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing, flushing cistern and flush pipe including EWC Seat cover complete all as directed.
S&F in repair PVC low level flushing cistern 10 ltr capacity syphonic action type white body with MS bracket , inlet ball valve, float handle and flush pipe (for EWC or WC) etc complete all as specified and directed.
S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and directed.
S& F in repairs Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spfd & directed.
S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure screwed both ends for iron pipes or for Unions and fixed .
S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers etc complete all as specified and directed.
S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, etc complete all as specified and directed.
S&F in repairs CP wall mixer (3 in 1) complete all as specified and direcated and as approved by GE.
S&F in repairs CP Central hole basin mixer fancy type 15mm dia all as specified and directed.
S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.
Supply and fixing of soap-dish chromium plated etc complete all as specified and directed.
S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) etc complete all as specified and directed.
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc complete all as specified and directed.
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and directed.
S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc complete all as specified and directed.
S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and directed.
S&F of 110mm dia PVC (SWR) bends etc complete all as specified and directed.
S&F of 110mm dia PVC (SWR) coupler etc complete all as specified and directed.
S&F of 110mm dia PVC (SWR) junction single,(Single T) equal or unequal etc complete all as specified and directed.
S&F of 110mm dia PVC (SWR) junction double, (double T), equal or unequal etc complete all as specified and directed.
S&F 75mm PVC(SWR) bends any radius with acess door etc complete all as specified and directed.
S&F 75mm PVC(SWR) bends any radius etc complete all as specified and directed.
S&F of 75mm dia PVC (SWR) Vent cowl etc complete all as specified and directed.
S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof etc complete all as specified and directed.
S&F in repairs low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm 32/40mm dia bore.including all accessories etc complete all as specified and directed.
S&F in repairs cast iron or mild steel Hat pegs and coat hooks, solid body, 175mm to 250 mm etc complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and directed.
Hacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty etc complete all as specified and directed.
S & F sheet glass 4mm thick ordinary quality and glazing with oil putty / beads in square not exc 0.50 Sq.m in each pane, all as specified and directed.
S & F sheet glass 4mm thick ordinary quality and glazing with oil putty / beads in square exc 0.50 Sq.m in each pane, all as specified and directed.
S & F 4mm thick figured glass panes pinheaded and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes all as specified & directed
S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane etc complete all as specified and directed.
S&F for galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.
S&F in repairs, galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.
M & L for roof treatment (for staircase/tank portion of bldgs) including the following :- (i) Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. (ii) M & L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in top of roof. (iii) Screed bed or bedding layer or mortar 15mm thick layer of cement mortar 1:4 for laying floor finishes. (iv) Applying two coats of Aluminium Paint on top of membrane @0.10 Kg/Sqm. (v) Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces. (vi) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric laid on primed surface by forced application complete all as specified
M&L for disconnecting existing tanks capacity exc 500 Ltr & n exc 1000 Ltr, setting a side (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately) etc complete all as specified and directed.
M&L for dismantling water tank of exc 500 ltr and not exc 1000 ltr Capacity etc complete all as specified and directed.
S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve of size 20mm, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. .
S&F 10 mm thick solid PVC insulation panels placed in false ceiling , fixed with screws in ceiling over and incluiding GI grid frame work including taking down and complete fixing arrangment as per specification all as directed by Engineer-in-Charge. (Make : Rajashri or equivalent as approved by GE)
Taking down rolling shutter of size exc 1.5 Sqm n.exc 12 Sqm complete all as specified and directed.
S&F in repair steel rolling shutters gear operated type with bevel gear box and crank handle of thickness of laths 1.25mm, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, eracted in position as indicated etc complete all as specified and directed.
S&F ball bearing for rolling shutters etc complete all as specified and directed.
S&F safety lever locks mild steel with 4 levers for rolling shutters etc complete all as specified and directed.
Taking down shutter and resecuring or easing and adjusteding and fixed in same opening of any discription exc 1 Sqm but not exceeding 2 Sqm each etc complete all as specified and directed.
Taking down shutter and resecuring or easing and adjusteding and fixed in same opening of any discription not exceeding 1 Sqm each etc complete all as specified and directed.
Ms ARENKOKLA CONTRUCTION
Shri Atoshe Tuccu
M/S ARVIND GROUP OF CONSTRUCTION & INFRASTRUCTURE
KAILASH KUMAR LADHA
SHRIi Bachulal shah
Kalim sons
commercial enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .