Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.0 Cr
EMD Value
₹2.0 L
Closing Date
23 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of 24x7 PHC Building at Pua of TARAVA Block under National Health Mission in the Sonepur district of Odisha (Scope of work in addition to above is uploaded separately along with this NIT)
NBCC/ODISHA/ZO/NHM/NIT/22-23/38
NBCC/ODISHA/ZO/NHM/NIT/22-23/38
Open Tender-Domestic
Civil Works General
Sonepur, Odisha
₹11,800
₹2.0 L
23 Feb 2023
8 Feb 2023
23 Feb 2023
23 Feb 2023
9 Mar 2023
Head Description of Item Unit Qnty. Rate Amount
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift and
stacking the soil upto a lead of 100 metre and
including dewatering, removing slush, shoring
and strutting (as required), complete as per
specification and as directed by the Engineer-In-
Filling in foundation trenches and plinth, with
excavated earth including laying the earth in
layers not exceeding 23.5 cm thick ramming &
watering with all leads & lifts including cost of all
labour,T&P completed as directed by the
Engineer-in-charge.
Supplying and filling sand in foundation and over
areas including watering, ramming, consolidating
and dressing, labours, tools, taxes etc. all
complete as per the specification and direction of
Engineer-In-Charge.
Diluting and injecting chemical emulsion for PRE
CONSTRUCTIONAL Anti-termite treatment and
creating a continuous chemical barrier under
and all-round the column pits, wall trenches,
basement excavation, top perimeter of building,
expansion joints, over the top surface of
consolidated earth on which apron is to be laid,
surroundings of pipes and conduits etc.
complete as per specifications (plinth area of the
building at ground floor only shall be measured
Providing and laying plain cement concrete 1:3:6
(1 cement : 3 sand : 6 stone agregate 40mm
nominal size) as levelling course in floor and
plinth including tempering, curring, shuttering
etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement: 2 sand: 4 stone aggregate
12mm nominal size) as levelling course in
foundation and plinth etc. including tempering,
curring, shuttering etc.complete all depth and
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
First class Fly ash Brick masonry using bricks
of size 25 cm. x 12 cm. x 8 cm. having crushing
strength not less than 75 kg. Per. Sqr. Cm. in
cement mortar of mix( 1:6) with ordinary
Portland slag cement(PSC) and screened &
washed sand for mortar after immersing the
bricks for 6 (Six) hours in water before use in
Foundation & Plinth including splays cutting,
9 3 circular moulding, corbelling, chamfering and 0 0.00 0.00 0.00
similar such type of works, watering and curing
etc. including cost, conveyance, loading,
unloading, royalties and taxes of all materials,
cost of all labour, scaffolding, sundries, T&P
required for the works etc. complete in all
respect as directed by the Engineer-in-Charge.
Fly Ash. brick masonry of size 25 cm. x 12 cm.
x 8 cm. having crushing strength not less than
75 kg. Per Sqr. Cm. in cement mortar of mix
(1:6) with approved grade cement and screened
& washed sand for mortar after immersing the
bricks for 6 (Six) hours in water before use in
Superstructure including splays cutting, circular
moulding, corbelling, chamfering and similar 0 0.00 0.00 0.00
such type of works, watering and curing etc.
including cost, conveyance, loading, unloading,
royalties and taxes of all materials, cost of all
labour, scaffolding, sundries, T&P required for
the works etc. complete in all respect as
directed by the Engineer-in-charge
Half brick work with Fly Ash brick masonry in
cement mortar (1:4) in super structure having a
crushing strength of not less than 75 kg./sqcm
with dimensional tolerance ± 2% including splays
cutting circular moulding chamfering and
corbelling and similar such type of works with all
necessary projections watering and curing after
14 3 immersing the bricks in water at least for six 0 0.00 0.00 0.00
hours before use including cost, conveyance,
royalties and taxes of all materials with all
labour,labour cess and T & P required for the
work complete in all respect as per direction of
Engineer-in-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying Reinforced
cement concrete of M-20 grade as per approved
designs and drawings having a minimum
compressive strength (in work test) 200 Kg. /
Square cm. in 15 cm. cubes at 28 days after
mixing and test conducted in accordance with
I.S. 516 using 12 mm. to 20 mm. size black
hard crushed broken granite stone chips and
screened and washed sharp sand for mortar of
approved quality from approved quarry, washed
and cleaned ( 20mm. size chips not to exceeds
25 % ) to be mixed in concrete mixture with
Portland slag cement (PSC) including hoisting,
lowering, laying and compaction concrete by
using vibrators, watering and curing for 28 days,
16 3 centering and shuttering then after dismantling 0 0.00 0.00 0.00
and removing debris from the work site and
finishing the exposed surface smooth providing
grooves or beads wherever necessary including
cost, conveyance, loading, unloading, royalties
and taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S. rods
or tor steel tying the grills and placing in proper
19 3 b) Column up to plinth Cum 18.87 13590.30 2,56,402.72
21 3 f) Column above plinth Cum 19.87 13590.30 2,69,999.84
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of make including bending,
binding, welding and joining if necessary and
tying the grills and placing in position as required
for R.C.C. Work and for providing fan hooks as
required, hoisting, lowering, laying including
cost, conveyances, taxes of M.S. Rod or tor
steel and binding wires of 18 to 20 gauge and
labour required for the work for bending, binding
31 3 and tying the grills in all floors (Linear 0 0.00 0.00 0.00
measurement will be taken and quantity will be
calculated basing on the standard weight of
B.I.S. for M.S. Rods or tor steel only. Wastage if
any, including weight of binding wire will not be
considered for measurement) etc. complete as
per specification & direction of Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
34 3 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all floors
and all heights.
16mm cement plaster to inside of brick surfaces
with cement mortar of mix 1:6 (1 cement : 6 fine
37 3 sand) including necessary scaffolding, curing 0 0.00 0.00 0.00
etc. all complete at all floors and all heights.
39 3 Terrace floor Sqm 35.03 258.42 9,053.10
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
cement mortar of mix 1:4 (1 cement : 4 coarse
sand) including necessary scaffolding, curing
etc. all complete at all floors and all heights.
42 3 Terrace floor Sqm 20.34 203.55 4,140.21
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4
43 3 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P etc.
required for the work all complete incl. rubbing
as per direction of the Engineer-in-charge.
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes laid
on 12 mm thick cement mortar (1:3) (1
45 3 cement : 3 course sand) and filling joints with 0 0.00 0.00 0.00
slurry including cost of all materials, labour
T&P etc. required for the work all complete incl.
rubbing as per direction of the Engineer-in-
Supplying, fitting & fixing of 8-10 mm thick &
size of 600x600 mm vertified floor tile of matt
finish with veilcraft (VC/FT ) shield( Scratch
free/stain free) with water absorption limit
between 0.08% to 3% and conforming to IS :
15622:2006 (Group B Ib). laid on 20 mm thick
cement mortar (1:4) (1 cement : 4 course sand)
47 3 and filling joints with white cement of approved 0 0.00 0.00 0.00
quality including cost of all materials, labour T&P
etc. required for the work all complete as per
direction of the Engineer-in-charge (for New
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of 8-10 mm thick and
size of 600x600 mm vertified wall tile of in
dadoes, skirting and risers of steps of laid on 12
mm thick cement mortar (1:3) (1 cement : 3
course sand) jointed with slurry mixed with
49 3 pigment to match the shades of the tiles etc. 0 0.00 0.00 0.00
complete including cost of all materials, labour
T&P etc. required for the work all complete as
per direction of the Engineer-in-charge.
Providing and fixing seasoned sal wood work in
frames at any locations including doors,
windows,cupboard, clerestory and other frames
fixing in position including cost of hinges, M.S.
flat (30mm x 6mm) hold fasts lugs or dash
fasteners of required dia and length as per
drawing / specification, at all floors and all
Factory made 30mm/32mm flush door shutter
(Laminates both side of frame) with all labour,
iron fittings, and wooden hinged cleats etc fitted
and fixed complete in all respect.
Providing & fixing of Factory fabricated
WINPLUS® Aluminium Door Systems - For
sliding windows, made from 6063 alloy and T-6
tempered aluminium profile, in approved shade
of hybrid /purepolyster surface coating (50-
60micron Powder Coat), mechanically mitred &
jointed with casted / aluminium extruded corner
cleats along with Sliding window Flush Lock,
Bearing Rollers , Siliconised Weather strip and
5mm ET 125 toughened glassas infill shall be
fitted into Shutter using siliconised microwave
treated EPDM gaskets excluding taxes of all
materials and cost of all labours required for the
work etc. complete in all respect as desired by
the Engineer in charge. Note - conveyance, T&P
and scaffolding are not included herein.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing factory made 2 track 2 panel
KOMMERLING uPVC white colour sliding
window comprising of uPVC multi-chambered
frame having section Frame 58mm x 49mm,
Window sash: 37mm x 61mm, made out of lead
free green profiles with corners fusion welded,
fully reinforced with Galvanized steel 1.5/2.0
mm. The windows profile should fulfill the
requirements of Viny 2010. The physical
properties of the profiles like Vicat softening
temperature, density, tensile strength, hardness,
weatherability, impact strength and Modulus of
Elasticity should be tested in accordance with
ASTM/DIN-ISO standards and the thermal
conductivity as per IS standards. The window
57 3 comprising of uPVC extruded glazing beads of 0 0.00 0.00 0.00
appropriate dimension, EPDM gasket, G.I
fasteners 100 x 8 mm size for fixing frame to
finished wall, plastic packers, plastic caps and
necessary stainless steel screws etc. After fixing
frame the gap between frame and adjacent
finished wall shall be filled with weather proof
silicon sealant over backer rod of required size.
The sash will be fitted with 5mm clear glass (
float ).complete in all respect as per specification
and direction of the Engineer in Charge. etc.
Supplying and Fixing of M.S. Grills, M.S.Doors,
M.S. Gate etc including cost,conveyance of all
materials,priming,and labour for fitting fixing
etc.complete as per the instruction of Engineer-
Priming one coat with wall cement primer (water
bound) to make an even finished surface in all
floors and heights to wall surface of approved
make and shade including sand papering,
applying putty wherever necessary & cost of
scaffolding, staging charges with cost,
conveyance, taxes of all materials, cost of all
labour,labour cess T&P etc. complete as per the
direction of the Engineer-in-charge.
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand papering,
66 6 polishing the surface, cost, conveyances of all 0 0.00 0.00 0.00
materials and cost of all labour,labour cess with
T&P etc, complete as per specification &
direction of Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface smooth
and even by sand papering to receive painting in
walls, at all heights with staging wherever
necessary with cost, conveyance, taxes of all
materials, cost of all labour,labourcess, all T&P
etc. required for the work complete in all respect
as per the direction of the Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make to inside surface of walls finished with
Acrylic Wall putty (water based) of make and
finished smooth & even surface to receive
painting using roller to the final coat including
cost of scaffolding staging charges with cost,
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc. complete
for all floors as per specification & direction of
the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
74 6 Terrace floor Sqm 55.37 100.54 5,566.68
Painting two coats with approved Enamel Paint
75 6 on wood work over a coat of Wood Primer in 0 0.00 0.00 0.00
Painting two coats with approved Enamel Paint
on Steel work in Ground Floor
79 6 Terrace floor Sqm 4.01 173.22 694.63
Supplying, fitting and fixing of Stainless steel of
304 grade in hand ralling using 50mm dia of
2mm thick circular pipe with Balustrade of size
32mm X 32mm X 2mm @ 0.90mtr. C/C and
stainless square pipe bracing of size 32mm X
80 6 32mm X 2mm in 3 rows in stair case as per 0 0.00 0.00 0.00
approved design and specification, buffing,
polishing etc with cost, conveyance, taxes, all
materials, labour, T&P etc. required for the
complete in all respect.
2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
82 6 granite crusher broken chips on new work in 0 0.00 0.00 0.00
84 0 Sub-Total of Civil Works 0 0.00 0.00 1,39,93,725.24
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and fixing
rotational moulded polyethylene cylindrical
vertical water storage tanks conforming to
IS:12701/1996 including cutting holes through
the tank and fixing mild steel tubes and fittings
and providing extra sockets and jam nuts, fixing
ball valve etc. including hoisting upto a height of
5 metres above ground level and placing the
tank to the required position and providing 5.40
mtr. lengthx0.25 mtr width KB brickwork in
cement mortar (1:6) of 0.46m height in staging
86 146 and 0.13mtr thick circular protection wall of 0 0.00 0.00 0.00
0.46mtr height to support the tank,12mm thick
cement plaster in cement mortar (1:6) over brick
work, RCC slab of size 1.60mX1.60m and
0.10m thick ,RCC beam of 0.25mx0.30m and
3.40m average length in cement concrete (1:2:4)
using 12mm size crusher broken hard black
granite chips and required steel reinforcement
including centering and
shuttering,watering,curing ,cost of all
materials,conveyance of all materials to worksite
, payment of royalty, all taxes etc.all complete
as per approved drawing , P.H. specification and
direction of Engineer-in-charge
2000 liters capacity PVC water storage tank
supplying all materials, labour, T&P and cutting
holes through existing brick work including
making good the damages in cement mortar
(1:4) for taking G.I. Pipes and fittings/ P.V.C.
pipes and fittings including watering, curing, cost
& conveyance of all materials to worksite,
payment of royality, taxes etc. all complete as
per direction of Engineer-in-charge.
Supplying all materials , labour, T&P and cutting
holes in RCC floors and roofs upto 19cm thick
for passing P.V.C pipes and G.I fittings etc. ,
and repairing the holes after insertion of pipe etc.
with cement concrete (1:2:4) including finishing
complete so as to make it leak-proof as per
P.H. specification and direction of Engineer-in-
Supplying all materials, labour, T&P and cutting
grooves in pucca floors and walls for taking
G.I./P.V.C. pipes and making good the damages
including watering , curing , cost & conveyance
of all materials to worksite, payment of royality,
taxes etc all complete as per direction of the
Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing
vitreous china water closet, squatting pan
(Indian type W.C pan/Orissa pattern squatting
pan) duly embedded in cement concrete (1:5:10)
using 4cm size hard granite metal including
fixing a pair of vitreous china 250mm x 130mm
x30mm footrest, fixing 100mm dia HCI 'p' or 's'
91 7 trap (with/without 50mm dia horn) for water 0 0.00 0.00 0.00
colset squatting pan including jointing the trap
with pan in cement mortar (1:1) cutting the floor
and mending good the damages , cost &
conveyance of all materials to worksite, payment
of royality , taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
92 8 580mm size Orissa pan Each 4.00 2940.80 11,763.18
Supplying all materials , labour, T&P and cutting
holes through existing brick or laterite masonry
93 9 wall for taking U-PVC pipes and fittings Each 30.00 210.28 6,308.28
including making good the damages etc. all
complete as per P.H. specification and direction
of Engineer-in-charge
Supplying all materials , labour, T&P and cutting
of RCC chajja for taking HCI or U-PVC pipe and
fittings including making good the damages etc.
all complete as per P.H. specification and
direction of Engineer-in-charge
Supplying all materials labour T&P filling sand in
95 11 lavatories well watered and rammed including 0 0.00 0.00 0.00
lead of materials to work site.
Supplying all materials, labour, T&P and
providing cement concrete ( 1:2:4 ) with 12mm
size crusher broken hard black granite chips
97 13 including watering, curing,cost of all materials, 0 0.00 0.00 0.00
conveyance of all materials to work site with
payment of royalty, all taxes etc all complete as
per P.W.D specification and direction of
Engineer-in-charge
Supplying all materials, labour, T&P and
providing and fixing ceramic tiles in floors,
treads or steps and landing on 25mm thick bed
of cement mortar (1:1) ( 1 cement : 1 sand )
jointed with neat cement slurry mixed with
pigment to match the shades of the tiles
including watering, curing,cost of all materials,
99 15 conveyance of all materials to work site , 0 0.00 0.00 0.00
payment of royalty, all taxes etc all complete as
per P.W.D specification and direction of
Engineer-in-charge ( ceramic floor tiles of
premium grade having thickness 7mm to 8mm
conforming to IS 13755 of size 30cmx30cm
make to be pre-approved by the Engineer-in-
101 17 Ground floor Washrooms Sqm 44.27 1418.01 62,775.13
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials,labour,T&P and providing
12mm thick cement plaster(1:4) on brick work
including watering,curing,cost of all materials,
102 18 conveyance of all materials to worksite,payment 0 0.00 0.00 0.00
of royalty,all taxes etc.all complete as per PWD
specification and direction of the Engineer-in-
Ground floor - (Qnty same as Wall Tiles in G.F)
Supplying all materials, labour, T&P and
providing and fixing porcelain glazed tiles in dado
skirting on 12mm thick cement plaster (1:3)
jointed with neat cement slurry mixed with
pigment to match the shades of the tiles
including watering, curing,cost of all materials,
conveyance of all materials to work site ,
104 20 payment of royalty, all taxes etc all complete as 0 0.00 0.00 0.00
per P.W.D specification and direction of
Engineer-in-charge( ceramic wall tiles of
premium grade having thickness 6.5mm to
6.7mm conforming to IS 13753 of size
30cmx45cm make to be pre-approved by the
Engineer-in-charge )
Providing fitting, fixing of Aluminium door with
anodized AL. door section of 9202 as vertical
member,9201 as top and 9200 as middle bottom
107 23 member with frame section No. 9221 and Sqm 24.57 6065.64 1,49,032.69
tapered clip no. 4660 and the frame to be
completed by means of jointing angle No. 1855
Including all Cost of Labour. T&P hire charges of
drilling machine. labour charges etc. complete.
Supplying all materials, labour, T&P and laying in
trenches (to level or slope) unplasticized P.V.C.
pipe conforming to IS 4985/2000 of the following
out side dia for class- 3 (0.60mpa ) including
jointing with supply of approved solvent cement
108 24 by non-heat application method/as per 0 0.00 0.00 0.00
manufacture's specification, provoding and
laying in trench cement concrete (1:4:8) with
40mm size hard granite metal in the type C-1
standard bedding surrounding or encasing
including concrete for bedding and curing etc all
complete as per P.H. specification and direction
of the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials ,labour ,T&P and
constructing Inspection Chamber of inside size
760mmx760mmx460mm with cement concrete
(1:3:6) using 40mm size crusher broken hard
black granite metal on bed , KB brick work in
cement mortar (1:6) in foundation and plinth,
moulding and shaping the channel inside and
benching with cement concrete (1:2:4) using
12mm size crusher broken hard black granite
111 27 chips, 12mm thick cement plaster (1:3) with 0 0.00 0.00 0.00
cement punning to inside, cement flush pointing
(1:3) to outside, R.C.C cover slab (1:2:4) using
12mm size crusher broken hard black granite
chips with R.C.C man hole cover, earth work in
excavation in all kinds of soil and refilling the
cavity around the chamber including
watering,curing,cost of all materials, conveyance
of all materials to worksite, payment of royalty,all
taxes etc.all complete as per approved
drawing, P.H specification and direction of
Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia RCC
Supplying all materials labor T&P and
constructing MH chamber of sizes earth work in
excavation in all kinds of soil CC(1:1:8) with
black granite chips size 46mm brick work with
K.B. brick having crossing strength not less than
C.P(1:8) inside MH chamber over benching with
113 29 cement slush pointing (1:3)outside the MH 0 0.00 0.00 0.00
chamber providing painting MS or CI step iron
RCC(roof of slab with CC(1:2:4)with black
granite chips size 12mm bending binding tying
the grills placing of the reinforcement providing
RCC color of required size refilling the cavity
around the MH chamber with excavated earth
including channeling the bed of MH etc all
complete as per PH specification.
MH size 0.91m x 0.91 m with 0.45 m (18” dia
Supplying all materials labour T&P and
constructing 1.40m dia x 2.00 m deep soak way
pit with dry brick having crossing strength not
less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6)
for the remaining 0.4572mm height of wall at top
CC(1:3)inside and outside inside fill with dry
115 31 brick khoa size 38mm ,CM thick RCC perforated Each 2.00 22144.35 44,288.70
slab to a height of 1.9012m from bottom covered
by means of 50mmthick RCC wall cover in
pieces filled with iron plugs including earth work
in excavation refilling of cavity around the pit and
painting the iron works complete as per PHD
design and specification including carriage of all
materials to site.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials ,labour ,T&P and
constructing gully trap chamber of inside size
250mmx250mm with 8cm thick RCC precast
cover slab in cement concrete (1:2:4) mix using
12mm size crusher broken HG chips, foundation
concrete (1:4:8) using 40mm size crusher
116 32 broken HG metal on bed and around trap, KB Each 6.00 1647.04 9,882.26
brick work in cement mortar (1:6) in foundation
and plinth and inside 12mm thick cement
plastering (1:3) finished with a floating coat of
neat cement including fixing 100mmx100mm
size HCI gully trap, 150mmX150mm size CI
grating etc.all complete as per drawing,
specification and direction of Engineer-in-charge
117 33 2 no 50 users RCC septic tank 0 0.00 0.00 0.00
Earth work in excavation of foundation in all
kinds of soil within 50m initial lead and 1.5m
118 34 initial lift including rough dressing & breaking Cum 55.89 249.40 13,939.23
clods to maximum 5cm to 7cm and laying in
layers not exceeding 0.30m in depth and as per
direction of the Engineer-in-Charge.
Extra lifts of 1.50 mtr or part thereof over the
initial lift of 1.5 mtr in all kinds of embankments
and road works and ordinary earthwork in
Supplying all materials, labour, T&P and
providing shoring and shuttering foundation
120 36 trenches, pits etc with close wooden planks or Sqm 91.58 320.61 29,361.10
sheets shuttering etc all complete as per
direction of the Engineer in charge.
Supplying all materials, labour, T&P and filling in
foundation and plinth with sand well watered and
rammed including conveyance of all materials to
worksite, payment of royalty, taxes etc.all
complete as per direction of the Engineer in
Supplying all materials, labour, T&P and
providing cement concrete (1:3:6) with 4cm size
hard granite metal including watering, curing,
122 38 conveyance of all materials to worksite, payment Cum 6.16 5515.79 33,977.28
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
Supplying all materials, labour, T&P and
providing cement concrete (1:1.5:3) with 12mm
size hard broken granite chips for R.C.C works
including hoisting, laying, watering, curing,
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
Supplying all materials, labour, T&P and
providing M.S reinforcement for R.C.C work
including cutting, bending, binding, and tying the
124 40 grills and placing in position including cost of Qntl 32.70 10156.97 3,32,132.85
binding wire 18 to 20 gauge, conveyance of all
materials to worksite, payment of royalty, taxes
etc all complete as per specification and
direction of the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing rigid and smooth centering and
shuttering for R.C.C works including false work
and dismantling them after casting including
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
R.C.C floor and roof slabs, landings, balconies,
126 42 projecting sunshades and chajjas up to 4.30 mt Sqm 16.00 515.54 8,248.67
R.C.C beams,columns,girder and bressmer etc.
Supplying all materials, labour, T&P and
providing 6mm thick cement plaster (1:4) on
RCC work including watering, curing,
128 44 conveyance of all materials to worksite, payment Sqm 79.36 188.56 14,964.44
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
Supplying all materials, labour, T&P and
providing cement punning including watering,
curing, conveyance of all materials to worksite,
129 45 payment of royalty, taxes etc all complete as per Sqm 79.36 38.94 3,090.28
specification and direction of the Engineer in
Supplying all materials, labour, T&P and
providing 12mm thick cement plaster (1:4) on
brickwork including watering, curing,
130 46 conveyance of all materials to worksite, payment Sqm 10.56 182.43 1,926.44
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
Supplying all materials, labour, T&P and
providing brick work with K.B bricks having
crushing strength not less than 75kg/cm² with
dimensional tolerance ± 8 percent in cement
131 47 mortar (1:4) including watering, curing, Cum 1.20 5157.78 6,189.34
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
Supplying all materials, labour, T&P and making
MS step iron in 20mm diameter MS steel bars
132 48 and fixing into walls of man hole/septic tank duly Each 16.00 297.12 4,753.98
embedded in cement concrete (1:3:6) complete
as per specification and direction of the Engineer
Filling in foundation and plinth with excavated
materials, moorum including watering and
ramming as directed by the Engineer in charge
134 50 Pump House of size 8'-0''x8'-0'' (Internal) 0 0.00 0.00 0.00
Earth work in excavation of foundation in all
kinds of soil with in 1.5m initial lift including
dressing and leveling of bed and breaking the
clods and the excavated materials with in 50m
initial lead as per direction of Engineer in charge.
Supplying all labor T&P & filling sand in
foundation and plinth with well watered &
rammed etc. all complete as per direction of EIC.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labor T&P providing CC
(1:4:8) with 4 cm HG metal including watering
curing lead of all materials to site etc. complete.
Supplying all materials labour T&P and providing
1st class Fly Ash brick work in CM (1:6) in F&P
including watering and curing and lead of
materials to site.
Supplying all materials, labour, T&P & providing
2.5cm thick D.P.C. flooring with cement
139 55 concrete (1:2:4) 12mm hard broken granite Sqm 4.03 344.09 1,386.67
chips including conveyance of all materials,
watering curing payment of royalty taxes etc. all
complete as per direction of Engineer-in-charge.
Supplying all materials, labor T&P providing CC
(1:2:4) with 4 cm HG metal including watering
curing lead of all materials to site etc. complete.
Supplying all materials labour T&P and providing
141 57 1st class Fly Ash brick work in CM (1:6) in Cum. 6.68 4929.10 32,926.36
Super Structure including watering and curing
and lead of materials to site.
Providing C.C. (1:1½:3) with 12mm size hard
granite chips of RCC work including hoisting
and laying and curing with lead of all materials
Supplying all materials, T&P and providing MS
reinforcement for RCC work including cutting,
143 59 bending, binding and tying the grills and placing Qtl 1.22 10156.97 12,391.50
in position including cost of binding wire 18 to 20
Supplying all materials labour T&P and providing
12mm thick C.P (1:6) including watering curing
and conveyance of all materials to site.
Rigid & smooth centering & sheltering for RCC
work including falls work & dismantling than
after casting including cost of materials in
RCC floor, roof slab chhaja up to 4.430 m height
Supplying all materials, labour, T&P & providing
2.5cm thick A.S. flooring with cement concrete
147 63 (1:2:4) 12mm hard broken granite chips Sqm 5.76 356.71 2,054.67
including conveyance of all materials, watering
curing payment of royalty taxes etc. all complete
as per direction of Engineer-in-charge.
Supplying all labor T&P & filling foundation and
plinth with excavated materials well watered &
rammed etc. all complete as per direction of EIC.
Supplying all materials labour T&P providing on
two coats of white washing ceiling
150 66 Same as Plaster Area Sqm 62.15 14.63 909.38
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying fitting, fixing in position angle iron
window frame made out of 35mm x 35mm x
5mm, M.S. angle with required nos. of hinges
and steel shutter made out of 25mm x 25mm
x3mm, M.S. angle fitted with 20 gauge G.P.
151 67 sheet/ steel plate and welded with tower bolt, K.G. 103.00 101.57 10,462.16
handle hold fast & M.S. flat of 19mm x 3mm &
welded with entire grill on windows and one coat
of red oxide primer and fixing with C.C. (1:3:6)
using 12mm size HBG CB Chips and making
good to the damages and finishing the exposed
surface smooth with watering curing etc. as per
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
PVC pipes conforming to ASTM-D-1785/89 of
152 68 the following nominal bore, tube fittings and 0 0.00 0.00 0.00
clamps including making the wall good. ceiling
and floor, testing all complete as per
specification and direction of the Engineer in
charge.(Oriplast/Supreme/Finolex)
153 69 20mm dia PVC ASTM pipe (sch-80) Mtrs. 50.00 160.36 8,018.10
154 70 25mm dia PVC ASTM pipe (sch-80) Mtrs. 150.00 220.54 33,081.30
155 71 32mm dia PVC ASTM pipe (sch-80) Mtrs. 80.00 289.93 23,194.08
156 72 40mm dia PVC ASTM pipe (sch-80) Mtrs. 75.00 381.26 28,594.35
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes conforming to IS:15778,
having thermal stability for hot & cold water
supply, including all CPVC plain & brass
threaded fittings including fixing the pipe with
clamps at 1.00 m spacing. This includes jointing
of pipes & fittings with one step CPVC solvent
cement and testing of joints complete as per
direction of Engineer-in-Charge
Supplying all materials, labour T&P and fitting
and fixing brass/CP fittings of the following
nominal bore with supply of all joiniting materials
including cost & conveyance of all materials to
worksite, payment of taxes etc. all complete as
per P.H specification and direction of the
Engineer-in-charge.
160 76 15mm dia CP angle stop cock Each 26.00 1016.33 26,424.68
161 77 15mm dia CP two in one bib cock Each 6.00 1480.90 8,885.40
162 78 15mm dia CP Bib cock Each 6.00 1306.73 7,840.39
163 79 15mm dia CP Long Body Bib cock Each 16.00 1713.24 27,411.87
164 80 15 mm dia CP Bib cock Elbow Action Each 10.00 2700.43 27,004.30
165 81 20mm dia CP concealed stop cock Each 4.00 894.56 3,578.23
166 82 25mm dia brass full way valve Each 8.00 1094.21 8,753.71
167 83 32mm dia brass full way valve Each 10.00 1601.85 16,018.50
168 84 40mm dia brass full way valve Each 4.00 2034.32 8,137.28
169 85 15mm dia CP Health faucet Each 6.00 1945.47 11,672.80
170 86 15mm CP Extension piece Each 64.00 69.97 4,478.34
172 88 15mm size C.P. flange Each 64.00 47.55 3,043.46
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fitting
and fixing U-PVC SWR soil waste ventilating
pipes and fittings of the following outside
diameter conforming to ISI No 13592/1992 to
walls with nails, bobbins and wooden plugs or
laying in trenches including jointing with supply
173 89 of approved rubber lubricant by non-heat 0 0.00 0.00 0.00
application method/as per manufacturer's
specification, testing, earthwork in excavation in
all kinds of soil and refilling of trenches , cost &
conveyance of all materials to worksite, payment
of taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
177 93 110mm U-PVC Plain bend Each 20.00 273.76 5,475.20
180 96 110mm U-PVC offset without ear Each 20.00 480.73 9,614.64
Supplying all materials, labour, T&P and fixing
the following vitreous china Wash Down Water
Closet (European type W.C pan) with integral
‘P’or ‘S’ trap to the floor with wooden plug and
chromium plated pedestal screws including
185 101 jointing the trap with soil pipe in cement mortar Each 1.00 14170.27 14,170.27
(1:1), fixing plastic seat and cover for wash
down water closet with chromium plated brass
hinges and rubber buffers including polishing etc
all complete as per specification and direction of
the Engineer in charge.SINGLE PIECE-WATER
COLSET P TRAP - LYS-WHT-0204P
Supplying all materials, labour, T&P and fixing
the following vitreous china Wash Down Water
Closet(European type W.C. pan)with integral 'p'
or 's' trap to the floor with wooden plug and
chromium plated pedestal screws including
jointing the trap with soil pipe in cement mortar
186 102 (1:1) fixing plastic seat and cover for wash down 0 0.00 0.00 0.00
water closet with chromium plated brass hinges
and rubber buffers including polishing , cost &
conveyance of all materials to worksite, payment
of royality, taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
European water closet with 's' trap
plain(Hindware/Parryware/Neycer make)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour T&P and and
fixing 12.50 liters/10 liters capacity low level
flushing cistern with a pair of cast iron or M.S.
brackets complete with fittings such as siphonic
arrangements 15mm nominal size brass/pvc ball
valve with polythene float CP brass
handle,unions and couplings for connection with
188 104 inlet, outlet and overflow pipes, 32mm dia CP 0 0.00 0.00 0.00
long flush bend, 15mm dia pvc inlet connection
pipe including cutting holes and making good the
same and connecting the flush bend with cistern
and closet and connceting the inlet pipe with
suupply main , cost & conveyance of all
materials to worksite, payment of taxes etc. all
complete as per P.H specification and direction
of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia
189 105 CP long flush bend ( Slimline-white-Parryware Each 9.00 1844.22 16,598.00
Supplying all materials, labour T&P and fixing
wash basins with hole for pillar taps with cast
iron or M.S.brackets painted white including
cutting holes in walls and making good the
damages with supply of wooden plugs, screws
and cement etc, fixing pedestal for wash basin
recessed at the back for the reception of pipes
and fittings, fixing PVC waste pipe of 32mm
nominal diameter for wash basin including brass
190 106 check nut complete, fixing pillar taps capstan 0 0.00 0.00 0.00
head screw down high pressure lettered 'Hot'
and 'Cold' with long screws, shanks and back
nuts of 15mm dia nominal bore, fixing 15mm dia
PVC inlet connection pipe and making
connection with pillar cocks and supply mains
for wash basin, fixing 32mm dia CP brass
waste, cost & conveyance of all materials to
worksite, payment of taxes etc. all complete as
perP.H specification and direction of the
Engineer-in-charge
550mmx400mm W.H.basin
(Hindware/Parryware/Neycer make)with 15mm
dia C.P.pillar cock with PEDESTRAL
Supplying all materials, labour, T&P for fitting &
fixing Kitchen sink of all standard sizes with a
192 108 pair of bracket, C.P. waste, trap & P.V.C. waste Each 4.00 5789.08 23,156.32
pipe & painting brackets including supply of
cement concrete & mortar etc. all complete. 24”
x 18” x 10” sink
Supplying all materials, labour, T&P and fixing
standard sized CP towel rail complete with CP
193 109 brass brackets fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws as per specification and direction of the
Engineer in charge
194 110 25mmx600mm long CP towel rail Each 11.00 824.70 9,071.72
Supplying all materials, labour, T&P and fixing
standard sized glass-shelf with CP brass
brackets and guard rail complete fixed to
wooden plugs with CP screws as per
specification and direction of Engineer in charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
197 113 600mmx125mm plate glass shelf Each 14.00 707.29 9,902.09
Supplying all materials, labour, T&P and fixing
mirror of superior glass mounted on 6mm.thick
A.C. sheet or ply wood sheet and fixed to
wooden plugs with CP screws and washers
complete as per specification and direction of
Engineer in charge.
600mmx450mm size B.E mirror (swivelled type)
Supplying all materials, labour, T&P and fixing
CP soap holder complete with CP brass
200 116 brackets fixed to wooden plugs with CP screws 0 0.00 0.00 0.00
as per specification and direction of the Engineer
Supplying all materials labor T&P & Fitting &
fixing CP shower with rim with supply of red lead
and yarn nail complete as per direction of
Engineer in charge.
Supplying all materials, labour, T&P and
providing fitting and fixing (Aqua guard) pure
chill 120 PSS UV of size 750 x 570 x 1350mm
hight with water storage capacity 120 liter's
204 120 along with 3 noa of faucets 2 for cold water and 0 0.00 0.00 0.00
1 for normal water including a flow of 1.5 ltr per
munite etc all complete as per approved drawing
, specification and direction of the Engineer in
205 121 Aqua guard pure Chill 120 PSS UV Each 2.00 119528.10 2,39,056.20
Construction of 1 nos production well including
206 122 scientific source finding through consolidated 0 0.00 0.00 0.00
and unconsolidated rock with down the ODEX
drilling rig with PVC, GI, MS pipe and installation
of submersible pump set with all accessories.
Labour for drilling a perfectly vertical bore hole of
specified dia for a specified depth below ground
level through consolidated and unconsolidated
rock with combination drilling rig as required to
suit the site condition as per the direction of
Engineer-in-charge including supply of own rig
with its accessories, tools and plant and
consumables etc. for lowering of 200mm
207 123 /150mm dia M.S. Pipe / PVC casing fitted with 0 0.00 0.00 0.00
socket and with or without well screen as per the
necessity for sub-medium hard and boulder
formation (M.S./PVC casing pipe if required to
prevent collapse of over burden is to be provided
by contractor including lowering and withdrawing
after completion of the tube well) 200mm dia x
400mm dia in over burden position inlcluding
packing of gravel supplied by Contractor for
400mm bore only etc as per direction of
Engineer incharge.
208 124 Drilling for 200mm dia bore 0 0.00 0.00 0.00
211 127 Drilling for 150mm dia bore 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Lowering the following size of G.I. / PVC / M.S.
housing pipe with or without slotted pipe as per
the necessity for ground level upto 45 mtr depth
and fitted and fixed up perfectly vertical position
213 129 including cutting and threading of pipes and 0 0.00 0.00 0.00
slotted pipes and supplying and fixing all jointing
materials, tools and plants etc all complete and
keeping the top of the casing pipe threaded
including plugging tube wells to prevent entry of
foreign materials.
Lowering 200mm dia M.S.ERW pipe casing pipe
cleaning and developing the tube well with
supply of compressor worked till clear and
adequate discharge in obtained from the tube
well including supply and use of all necessary
equipment and labour as per direction of
Engineer-in-charge.
Supplying all labour, materials and T&P for
providing sanitary sealing by cement concrete
218 134 grouting of annular space around M.S. casing No. 1.00 1902.11 1,902.11
pipe uptp 5 mtr below groun dlevel to plug the
bore hole excluding cost of cement etc all
complete as per direction of EIC.
Supplying all materials, labour, T&P and
providing, fitting and fixing submersible pump
with squirrel cage induction type submersible
type submersible electric motor to run on 3
phase/1 phase line voltage ranging from 320 volt
to 450 volt conforming to IS: 8034/89 with
219 135 following specifications with suitable control 0 0.00 0.00 0.00
panel, jointing with GI/PVC/HDPE pipes,
electrification, testing, commissioning, trial
running, conveyance of all materials to worksite,
payment of taxes etc all complete as per
specification and direction of the Engineer in
charge (Texmo/Crompton Greaves/Kirloskar
2 H.P. Single phase/ three phase 7 stage
head renge of 20 to 35 mtr with discharge
capasity 145 to 110 L.P.M With outlet dia 25
221 137 DOL Control panel Each 2.00 4490.49 8,980.98
222 138 40mm dia steel short piece Each 2.00 179.71 359.43
224 140 50mm size CI bracket Pair 1.00 107.73 107.73
226 142 20mm dia rigid UPVC pipes Mtr 90.00 8.14 732.78
227 143 Steel rope with cover Mtr 90.00 31.51 2,835.54
Labour charges for lowering including
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
HDPE pipes and pipe fittings conforming to IS:
229 145 4984/2000 (10kgf/sqcm) of the following nominal 0 0.00 0.00 0.00
bore with clamps and jointing by Fusion welding
method including testing, making good the wall,
ceiling and floor all complete as per specification
and direction of the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
231 147 Sub-Total of Plumbing Works 0 0.00 0.00 34,50,672.30
232 0 Electrical Works 0 0.00 0.00 0.00
Point wiring in Recessed wirring to light point/
fan point/ exhaust fan point/ call bell point with
1.5 sq.mm FRLSH/LSZH PVC insulated copper
conductor of ISI marked
20 mm dia PVC flexible non metallic conduit
FRLS type ISI marked with 6A modular type((
falme retradant type)) switch ISI marked , and
ceiling rose ISI marked of modular type G.I box
with metallic cover plate (both side) falme
retradant type) of suitable size, modular box
with 1.5 sq. Mm FRLS PVC insulated single core
233 1 multistandard copper conductor as earth wire 0 0.00 0.00 0.00
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY AS
FOLLOWS ,complete suitable for
Office.(Maximum 02 nos point in one circuit).All
the switches & sockets should be warrantied for
a replacement period of 10 years against defects
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked
20 mm dia PVC flexible non metallic conduit
FRLS type ISI marked with 6A modular type((
falme retradant type)) switch ISI marked , and
ceiling rose ISI marked of modular type G.I box
with metallic cover plate (both side) falme
retradant type) of suitable size, modular box
with 1.5 sq. Mm FRLS PVC insulated single core
237 4 multistandard copper conductor as earth wire Nos 15.00 1200.06 18,000.90
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY AS
FOLLOWS ,complete suitable for
Office.(Maximum 02 nos point in one circuit).All
the switches & sockets should be warrantied for
a replacement period of 10 years against defects
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying ,fixing of 6A Plug on the same board
in existing switch board with complete fitting by
01 no of 6A switch & socket (modular type)( (
falme retradant type)) & other required
accessories of ISI marked as approved as per
direction of Engg. -in -Charge. , complete suitable
for for HOSTEL.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10 years Nos 31.00 227.74 7,059.94
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period for
acceptance of materials.
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( ( falme retradant
type)) with suitable size modular box & cover(
falme retradant type) including supplying of all
required accessories of ISI marked as approved
as per direction of engg-in-charge.. , complete
suitable for Residence.(Maximum 02 nos point
in one circuit).All the switches & sockets should
239 4 be warrantied for a period of 10 years against Nos 66.00 597.08 39,407.28
manufacturing defects against which ncessary
test report & Warrnaty certificate to be
submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
Supplying,fixing of 1x16A Plug on the separate
board with complete fitting by 01 no of 16A
switch & socket(modular type)( falme retradant
type)) with suitable size modular box & cover(
falme retradant type) including supplying of all
required accessories of ISI marked as approved
as per direction of engg-in-charge.. , (For
equipement power)All the switches & sockets
should be warrantied for a replacement period of
10 years against defects with ncessary test
report & Warrnaty certificate to be submitted to
the department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Receass wiring for circuit/submain wiring with
the following mentioned size PVC FRLSH/LSZH
insulated, copper conductor, single core cable
or equievalant reputed make A catagory ISI
marked as approved, in recessed PVC conduit
241 4 Heavy duty FRLS of mentioned size as required 0 0.00 0.00 0.00
as per direction of Engg.-in-Charge. Ncessary test
report & Warrnaty certificate to be submitted to
the department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5 sq.
mm copper wire for earth continuty conductor.
242 4 In 20 mm dia non metallic heavy duty flexible Mtr 211.00 153.40 32,367.40
conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5 sq.
mm copper wire for earth continuty conductor in
243 4 20 mm dia non metallic heavy duty flexible Mtr 233.00 169.92 39,591.36
conduit.(BDB to LSB/LIGHT CKT/5A
PLUG/INVERTER POINT TO EACH QTR)
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core 2.5
sq. mm copper wire for earth continuty
conductor .in 25 mm dia non metallic heavy
duty flexible conduit(LDB to LSB/5A SOCKET)
2 nos single core 4 sq. mm copper wire for phase
and neutral and 01 no of single core 1.5 sq. mm
copper wire for earth continuty conductor in 20
mm dia non metallic heavy duty flexible conduit
.(PDB to PSB/ GAYSER POINT/AC POINT/ROOM
LIGHT CONTROL TO CORRIDOOR POINT/DG
PANEL ESSENTIAL LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for phase
and neutral and 02 nos of single core 2.5 sq. mm
copper wire for earth continuty conductor in 32
246 4 mm dia non metallic heavy duty flexible Mtr 35.00 287.92 10,077.20
conduit.(PDB to PSB/GAYSER. POINT/AC
POINT/DG PANEL ACCL TO EACH QTR
ESSENTIAL LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for phase
and neutral and 01 no of single core 2.5 sq. mm
copper wire for earth continuty conductor in 25
mm dia non metallic heavy duty flexible conduit
.(LFDB TO LBDB) (2X6+1X2.5)
4 nos single core 6 sq. mm copper wire for phase
and neutral and 02 nos of single core 2.5 sq. mm
copper wire for earth continuty conductor in 32
mm dia non metallic heavy duty flexible
conduit.(LFDB TO LBDB/power unit/point)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core 4 sq.
mm copper wire for earth continuty conductorin
32 mm dia non metallic heavy duty flexible
conduit .(LFDB TO FLOOR PANEL TO TPN BDB
light ) (4X10+2X4)
Supplying and fixing 20 amps, 240 volts, SPN,
industrial type socket outlet, with 2 pole and
earth metal enclosed plug top along with 32
amps. C-series, SP MCB, in sheet steel enclosure,
on surface or in recess, with chained metal cover
for the socket outlet, and complete with
connections, testing and commissioning etc. as
required as per direction of Engg.-in-Charge.. .
250 4 ,All the Components should be warrantied for a Nos 13.00 723.34 9,403.42
replacement period of 5 years against defects
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying and fixing following size/ modules, GI
box along with modular base & metallic cover
plate (both side) plate for modular switches in
recess etc as required as per direction of Engg.-in-
Charge..All the Components should be
warrantied for a replacement period of 5 years
against defects with ncessary test report &
251 4 Warrnaty certificate to be submitted to the 0 0.00 0.00 0.00
department for genuinity of product & to avail
free aftersales service within warranty period for
acceptance of materials.
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI marked
along with accessories in surface/recess 0 0.00 0.00 0.00
including cutting the wall and making good the
same in case of recessed conduit as required as
per direction of Engg.-in-Charge .
Supply and fixing modular type indicator on the
existing switch box/cover . Equievalant higher
model of equievalant reputed make & model A
catagory ISI marked as approved as required as
per direction of Engg.-in-Charge.All the
258 4 Components should be warrantied for a Nos 6.00 121.54 729.24
replacement period of 5 years against defects
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and installation of AC starter Modular
type, Eequievalant reputed make & model A
catagory ISI marked as approved coil voltage-415
Volt A.C. & O/L range of 9-14A range on mod Box
of suitable size including modular coveras
required as per direction of Engg.-in-Charge .All
259 4 the Components should be warrantied for a Nos 13.00 724.52 9,418.76
replacement period of 5 years against defects
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supply and fixing CALL bell (Ding dong type)
/Buzzer on the existing switch box/cover. .as
required as per direction of Engg.-in-Charge.All
the Components should be warrantied for a
260 4 replacement period of 5 years against defects Nos 6.00 240.72 1,444.32
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
S/F of Bakelite angle holder/batten holder of ISI
marked conforming to IS-1258/1987 in place of
ceiling rose as per direction of Engg.-in-Charge
.All the Components should be warrantied for a
261 4 replacement period of 5 years against defects EACH 21.00 70.80 1,486.80
with ncessary test report & Warrnaty certificate
to be submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying,fixing of Blanking plate(modular
type)( falme retradant type)) in existing switch
box(anti bactorial & falme retradant type)
including supplying of all required accessories
of ISI marked as approved as per direction of
engg-in-charge.. complete suitable for IPH
standard hospital.It should be warrantied for a
262 4 period of 10 years against manufacturing defects Nos 23.00 49.56 1,139.88
against which ncessary test report & Warrnaty
certificate to be submitted to the department for
genuinity of product & to avail free aftersales
service within warranty period for acceptance of
263 4 Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0.00 0.00
Supplying, installation, of exhaust fan of heavy
duty 300 mm sweep (Make-Equievalant higher
model with 5 star rated of of exhaust fan in the
264 4 existing wall, including fixing & conntection as Nos 12.00 3648.56 43,782.72
required as per direction of Engg.-in-Charge.
Replacement Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1400 mm sweep white/milky
colour ceiling fan including wiring the down rod
of standard length (upto 30 cm) with 1.5 sq mm
PVC insulated, copper conductor, single core
cable etc. as required.(With fan Regulator) as
required as per direction of Engg.-in-
Charge.Replacement Warranty will be 5 years.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, testing and
commssioning of 1200 mm sweep white/milky
colour ceiling fan including wiring the down rod
of standard length (upto 30 cm) with 1.5 sq mm
PVC insulated, copper conductor, single core
cable etc. as required as per direction of Engg.-in-
Charge,Replacement Warranty will be 5 years..
.(With fan Regulator)
Supplying and fixing of Energy efficient
surface mounted square shape 18 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20 watt
and lumen output of 1500 lumens, , CRI not less
than 80,CCT of 6000 degree K,THD less than
267 4 10%, with electronic driver, internal surge Nos 55.00 1788.88 98,388.40
protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs
warranty) and all other accessories suitable for
operation on 220 V to 240 V supply as required
as per direction of Engg.-in-Charge. ( Make :
(Make: wipro LD80-171-60-XX-SM or similar
model of LT/Trilux
/Philips/Panasonic/HALONIX or equievalant
reputed make & model A catagory ISI marked as
approved).The luminaire should be Replacement
Warranty will be
SITC of energy 5 yearsLED tube light fittings
with decorative alluminium batten and LED tube
light having power rating not more than 20 watt
and lumen output not less than 2200 lumen
268 4 complete with electronic driver and all other Nos 25.00 938.10 23,452.50
accessories with diffuser having 5 years
warranty i/c connection etc as required as per
direction of Engg.-in-Charge. . The luminaire
should be Replacement Warranty will be 5 years
.SITC of Sleek LED 10-12 watt mirror light fitting
with extruded polycarbonate housing,High
optically efficient diffuser,above wash basin
complete with all accessoriesetc. directly on wall,
including connection with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable
and earthing etc. as required as per direction of
Engg.-in-Charge.
The luminaire should be Replacement Warranty
will be 5 years
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt
and lumen output not less than 2600 Lumen (
120 lumens/watt ) of size240 x240 x 40 mm ,
,CRI not less than 80,CCT of 5700-6500 degree
270 4 K,THD less than 10%, with Non integrated Nos 28.00 2357.64 66,013.92
isolated driver (protects the output /secondary
side from any disturbance on the input / primary
side ensuring safe operation), all other
accessories , life : 50,000 burning hours (5 years
warranty) , Internal surge protection of 3 KV
suitable for operation on 230 V, 50 Hz supply as
required as per direction of Engg.-in-Charge. The
luminaire should be Replacement Warranty will
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, testing and
commssioning of 400 mm sweep wall fan
including wiring with 1.5 sq mm PVC insulated,
271 4 copper conductor, single core cable etc. as Nos 6.00 2542.90 15,257.40
required as required as per direction of Engg.-in-
Charge.Replacement Warranty will be 5 years.
Supplying and fixing extra conduit down rod of
20 cm length G.I. pipe 15 mm dia, heavy gauge
including painting etc. as requiredas required as
272 4 per direction of Engg.-in-Charge . Nos 35.00 37.76 1,321.60
(Note : More than 5 cm length shall be rounded
to the nearest 10 cm and 5 cm or less shall be
ignored)of ISI mark as approved.
SITC of energy efficient LED 45W for lighting
from top having power rating not more than 45
watt and lumen output not less than 4500 lumen
complete with electronic driver and all other
accessories with diffuser having 2 years
warranty i/c connection etc as required as per
direction of Engg.-in-Charge. The luminaire
should be Replacement Warranty will be 5 years
274 4 .BDBS,DB,AC DB,FLOOR PANELS,MCBS 0 0.00 0.00 0.00
Supplying and fixing of following mentioned
way, three pole/single pole and neutral, sheet
steel,double door MCB distribution board, 415
volts/240 volts shall be as per IEC 61439-
3,integrated door earthing system offering
additional safety to the user,High quality
polyurethane Gasket,the box and cover shall be
fabricated to withstand IK09,the DB should be
properly pre-treated with 7 tank process and
duly powder coated, phosphatized with powder
coated finish, on surface/recess, complete with
275 4 terminal blocks,with suitable size FR PVC 0 0.00 0.00 0.00
insulated copper conducter up to terminal
blocks, tinned copper busbar, neutral busbar,
earth bar, din bar. or equievalant reputed make
& model A catagory ISI marked as approved. as
per direction of Engg.-in-Charge. The
Distribution boards should be Replacement
Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB Horizontal
Type as per IEC 61439-3 suitable for Flush
mounting and Surface mounting with 100A
Copper Bus Bar for each phase, with neutral Bus
276 4 bar, Earth Bar & Cable ties for cable Nos 2.00 2553.52 5,107.04
management, prefitted masking sheet, IP43-IK09
with metal door(FOR LIGHT,POWER INDOOR,3-
PH,POWER LOAD) Warranty on DB is 2 years.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply and fixing of 12 way DD single pole and
neutral sheet steel MCB distribution board 250V
on surface/recess complete with tinned copper
bus bar, neutral bus bar, earth bar, din bar,
detachable gland plate, interconnections,
277 4 phosphatized and powder painted including Nos 2.00 2244.36 4,488.72
earthing etc. as required (but with out MCB/
RCCB/ Isolator) (ALL LIGHT WITH
CORRIDOOR/COMMON AREA,EM LIGHT,UPS
LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
278 4 door)(only each EM. CONNECTION UPS LOAD) Nos 2.00 1923.40 3,846.80
Supplying and fixing 20 amps rating, 240 volts, C
series, Double poles MCB of in the existing MCB
DB complete with connections as per direction of
Engg.-in-Charge. The MCB should be
Replacement Warranty will be 5 years .MCB
279 4 should have the fault indication system in Nos 2.00 395.30 790.60
different colour for ON, OFF & TRIP condition or
Mid trip position for Trip conditions for easier
identification of fault.Warranty on MCB is 5
Supplying and fixing 6 amps to 32 amps rating,
240 volts, C series, single poles MCB of or
equievalant reputed make & model A catagory ISI
marked as approved. the existing MCB DB
complete with connections as per direction of
280 4 Engg.-in-Charge. The MCB should be Nos 45.00 155.76 7,009.20
Replacement Warranty will be 5 years.MCB
should have the fault indication system in
different colour for ON, OFF & TRIP condition or
Mid trip position for Trip conditions for easier
identification of fault.Warranty on MCB is 5
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA in the existing MCB DB in the
existing MCB DB complete with connections as Nos 2.00 1990.66 3,981.32
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5 years
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA in the existing MCB DB in the
existing MCB DB complete with connections as Nos 2.00 2270.32 4,540.64
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5 years
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA or equievalant reputed make &
model A catagory ISI marked as approved in the
283 4 existing MCB DB in the existing MCB DB Nos 2.00 3114.02 6,228.04
complete with connections as per direction of
Engg.-in-Charge.(for power BDB & AC ODU, 8
way TPN BDB IC).The RCCB should be
Replacement Warranty will be 5 years
284 4 (Earthing) INSTALLATION 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
S/IT/C of materials and installation of pipe earth
electrode made out of 50mm dia class B G.I. pipe
of 3.0 metre long with arrangements for fitting/
termination of G.I. flat / wire with G. I. nut
bolts & washers including cost of burnt wood
charcoal, salt, foreign soil, water pouring
arrangements, brick masonary enclosure on top
285 4 with removable RCC cover complete with labour Nos 4.00 3701.66 14,806.64
for excavation of pit in all kinds of soil & rock as
required and as per direction of Engineer-in-
charge.The entire earthing system should be
Replacement Warranty will be 5 years
Providing and fixing 4 mm dia copper wire on
286 4 surface or in recess for loop earthing as Mtr 122.00 112.10 13,676.20
required.as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper strip
on surface or in recess for connections etc. as
required as per direction of Engg.-in-Charge.
CABLING AND END TERMINATION MAIN AREA
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property AL.
conductor power cable of 1.1 KV grade of
following size cables as per direction of Engg.-in-
289 4 Charge. Ncessary test report & Warrnaty 0 0.00 0.00 0.00
certificate to be submitted to the department for
genuinity of product & to avail free after sales
service within warranty period for acceptance of
4core x 16 sq mm (MDB TO FDBL/FDBU
4 core x 4 sq mm (for small power/LIGHT TO
292 4 3.5core x 70 sq mm (To power MDB) Mtr 155.00 450.28 69,792.81
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
25 SQ. MM direct in ground in the trench in one
294 4 horizental formation including excavation ,sand Mtr 65.00 151.04 9,817.60
coushing protection covering and refilling the
trench etc as required as per direction of Engg.-in
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
295 4 25 SQ. MM direct in ground in the EXISTING Mtr 33.00 48.38 1,596.54
PIPE etc as required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding 25
296 4 SQ. MM but not exceeding 400 SQ. MM direct in Mtr 25.00 66.08 1,652.00
ground in the EXISTING PIPE etc as required as
per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
25 SQ. MM in open duct etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding 25
298 4 SQ. MM in open duct 400 SQ. MM direct in Mtr 12.00 53.10 637.20
ground in the EXISTING PIPE etc as required as
per direction of Engg.-in -charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
299 4 25 SQ. MM in surface with shaddle and screw etc Mtr 15.00 94.40 1,416.00
as required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
300 4 120 SQ. MM From 25 SQ. MM in surface with Mtr 23.00 149.86 3,446.78
shaddle and screw etc as required as per
direction of Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs for
following mentioned size cable.as per direction
of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia G.I.
pipe (medium class) in ground complete with G.I
304 4 fitting incl. trenching(75 mm depth)and refilling 0 0.00 0.00 0.00
as per direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground complete
306 4 with fitting incl. trenching(75 mm depth)and 0 0.00 0.00 0.00
refilling as per direction of Engg.-in-Charge.
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by 2mm
CRCA steel sheet duly derusted & pented by
simens gray powder cote paint is designed as
309 4 G.A drawing as per direction of Engg.-in-Charge. Set 1.00 99774.90 99,774.90
Warrentee period of replacement of panel &
accessories must be 5 years & compelete test
certificate must be submitted along with panel
board including component list.
In commer Main- 01 number of 125(80-125)
Amps 4P MCCB with Rom & sprader link,25 Ka &
01 nos of40A 4P O/L changeover switch for DG 0 0.00 0.00 0.00
& Servo with 40A 4P MCB. . (Icu=100%Ics)with
shunt trip.with axulary for BMS
Busbar- 04 numbers of 200Amps Electrolytic
copper busbar duly sleeved by color coaded PVC
sleeve & supported by suitable size DMC
Busbar DG - 04 numbers of 60 Amps Electrolytic
copper busbar duly sleeved by color coaded PVC
sleeve & supported by suitable size DMC
Out going- (i) 63A 4P MCB 6 NOS FOR POWER
Out going- (ii) 06 nos 32A 4P MCB LIGHT BDB
314 4 AC IDU BDB/LIGHT BDB,LIFT,WATER,solar,ups 0 0.00 0.00 0.00
Out going- (iii) 06 no 32A 2P MCB LIGHT BDB
315 4 AC IDU BDB/LIGHT BDB,LIFT,WATER,solar,ups 0 0.00 0.00 0.00
Instrument- (i)3 numbers phase indicating lamp
with toggle switch & HRC fuse.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
(ii) 01 set of digital type multifunction meter
317 4 with CT for voltage,current,frequency,PF,THD 0 0.00 0.00 0.00
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of equievalant reputed
make & model A catogory, ISI marked as
approved .The Load bearing capacity of the
Cable Trays should be minimum of
104.8Kg/meter at the span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray must
be 5 years & compelete test certificate must be
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , FLOOR RACE WAY WITH JUNCTION with
internal dimensions of size 54mm(H) x
200mm(W), of equievalant reputed make ISI
marked as approved .The Load bearing capacity
of the Cable Trays should be minimum of
104.8Kg/meter at the span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required.
10 KVA UPS SYSTEM(OFFICE & EMERGENCY
Supply ,installation ,testing & commissioning of
10 KVA ON LINE UPS SYSTEM WITH suitable
size battery bank, rated of battery & isolation
transformer, IGBT based inverter system with
inbuilt isolation transformer & automatic phase
sicuency corrector of 3ph in put to 3 ph
output,415V,protection for fault by
OL,UV,EF,GF,OC,Ph. Sicuency release of
equievalant model of or equievalant reputed
make A catogory, ISI marked as approved )
including supply of rack inverter stand with
sufficient backup upto 30 MINUTES with all
required accessories to complete the job
including all connection.LOAD OF CONF.) as per
direction of Engg.-in-Charge. Warrentee period
of all accessories & component & system must
be 5 years & compelete test certificate must be
submitted along with ups including component
322 4 list & SLD.
20 KVA DG WITH AMF PANEL 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply, Transportation, erection, testing and
commissioning of 3 Phase, 415V, 50Hz, water
cooled multi cylinder diesel generator set with
alternator of 20 KVA with suitable AMF panel
out put contineous rating directly coupled
Engine and Alternator with guard and mounted
on a common base plate of Robust construction
and complete without AMF panel having IP-52
protection, Acoustic Enclosure as per CPCB
323 4 norms , sound absorbing material, to restrict 0 0.00 0.00 0.00
sound level up to 75 dB up to 1 mtr distance and
as per CPCB norms etc as per following
specifications mentioned below.
A. Alternator as per direction of Engg.-in-Charge.
Warrentee period of panel must be 5 years &
compelete test certificate must be submitted
along with DG set including component list &
smoke exhaust system drawing,certified ISO
ALTERNATOR:The alternator of the output
rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F.
lagging at 1500 RPM. The alternator is self
324 4 excited, self regulated, and shall confirm to IS: 0 0.00 0.00 0.00
13364 of 1992 with regulation of +5% from no
load to full load. degree of protections shall be
ENGINE: Diesel Engine . Diesel Engine start,
developing suitable BHP output at 1500 RPM
with mechanical / electronic governing so as to
enable the alternator to give 20 KVA continuous
output at 0.8 P.F. lagging at NTP conditions. The
diesel engine shall be capable of providing 10%
O/L for 1 Hr for every 11 Hrs of continuous
325 4 running at full load. The engine with 1st filling of 0 0.00 0.00 0.00
oil and Diesel etc.
01. Exhaust pipe of required size and length with
insulation or clading.
02. Diesel tank suitable for 8 to 10 Hours running
03. Residential Silencer.
04. SMF Batteries with leads as per the
Manufacturer standardsBase Plate of required
BASE PLATE: Common
size for mounting of Engine Alternator Set
326 4 fabricated from MS Channerl and vibration 0 0.00 0.00 0.00
damping arrangement with cushy foor mounting
including paintng etc. as required.
FOUNDATION: Suitable size Cement Concrete
(1:2:4) foundation duly plastered and finished
with neat coat Cement as required along with
smoke exhaust system piping including base
frame of structure & lightening protection
327 4 system. *It also includes 2 nos GI pipe earthing 0 0.00 0.00 0.00
for body and 2 nos copper plate earthing for
neutral, control cable of 15mtr 2.5sqmm 6core ,
civil foundation work.
(The Manufacturing of DG set shall not in any
case be more than six months old from the date
of award of work)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
AMF PANEL: Cubical, Compartmentalized, AMF
Panel Baord with all Power & Control
Contractors, Switches, Meters and other
328 4 accessories, Internal Wiring, connection, inter- set 1.00 734769.48 7,34,769.48
connection etc. for Trouble Free smooth function
for 20KVA DG Set complete with Battery Charger
& leads as required.
329 0 Sub-Total of Electrical Works 0 0.00 0.00 23,90,481.35
Supply of A,C with indoor and outdoor unit
332 3 1.5 TR high wall split A.C Each 3.00 55445.84 1,66,337.52
333 4 2 TR high wall split A.C Each 3.00 65711.84 1,97,135.52
334 5 REFRIGRANT PIPING 0 0.00 0.00 0.00
Supply,installation of hard/soft copper
refregrant piping,complete with fitting of
bends and other nesessary material to
complete the job.
336 7 1 TR to 3 TR high wall split A.C mtr 12.00 988.84 11,866.08
Supply,installation & fabrication of MS base
frame for both indoor and outdoor unit and
other nesessary material to complete the job.
339 10 1 TR to 3 TR high wall split A.C no 16.00 1984.76 31,756.16
Supply,installation & fabrication of Insulated
341 12 drain water piping from indoor to 0 0.00 0.00 0.00
nearestdrain point separate to all and other
nesessary material to complete the job.
343 14 SHEET METAL WORKS 0 0.00 0.00 0.00
Supply,laying of control cable and other
nesessary material to complete the job.
346 17 For 1 TR to3 TR high wall split A.C mtr 22.00 145.14 3,193.08
347 18 Sub-Total of HVAC Works 0 0.00 0.00 4,13,139.24
348 1 Firefighting Works 0 0.00 0.00 0.00
349 2 EXTINGUISHER SYSTEM 0 0.00 0.00 0.00
Portable Fire Extinguisher System Supplying,
installation, testing and commissioning of CO2
type Fire Extinguisher 4.5 kg capacity confirming
to IS: 2878 made from ISI marked seamless
cylinder confirming to IS: 7285, fitted with ISI
350 3 marked controlled valve confirming to IS: 3224, Nos 4.00 12302.68 49,210.72
high pressure 1mtr discharge hose & horn
complete with initial gas charged with carrying
handle & wall mounting bracket as per direction
of Engineer-in-charge.
351 4 FIRE SIGNAGES SYSTEM 0 0.00 0.00 0.00
Providing and installing in position the following
type of sign boards made out of 3mm thick
"Opaque" PVC foam board with computer cut, 0 0.00 0.00 0.00
PVC non-reflective self adhesive vinyle painted
foam board, complete with mirror fasteners.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing the signages "Fire Exit, Fire
Exit Arrow Down,Fire Exit Arrow Left,Fire Exit
Arrow Right" of 1.5in height letters in white with Nos 6.00 1080.88 6,485.28
green back ground.The size of the board shall be
25cm x 15 cm and shall be fixed at the height of 2
354 7 Sub-Total of Firefighting Works 0 0.00 0.00 55,696.00
355 Grand Total 2,03,03,714.13
355 Grand Total 2,03,03,714.13
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ SON 008 NHM.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Drawings Sonepur PHC.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .