Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.0 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹23.4 L+₹1.4 L (6.49%)Rejected-Finance FLAT NO 03 PANCHAVATI BUILDING ADARSH NAGAR CHICALIM GOA 403711 | SOUTH GOA | GOA | 403711 | L2 | Rejected-Finance NOT BEING L1 | |
| 3 | L3₹23.6 L+₹1.6 L (7.17%)Rejected-Finance | L3 | Rejected-Finance NOT BEING L1 | |
| 4 | L4₹25.0 L+₹3.1 L (13.9%)Rejected-Finance C2 PAIXOMONTIRO APTS BEHIND NSD ALTO DABOLIM VASCO DA GAMA GOA 403 801 | SOUTH GOA | GOA | 403801 | L4 | Rejected-Finance NOT BEING L1 | |
| 5 | L5₹25.1 L+₹3.1 L (14.1%)Rejected-Finance BLDG NO XI 74 NEAR VALLARAM KULLANGARA TEMPLE KUNHIMANGALAM KOVVAPPURAM PO KANNUR DIST KERALA 670309 | KANNUR | KERALA | 670309 | L5 | Rejected-Finance NOT BEING L1 |
Tender Value
₹26.8 L
EMD Value
₹53,600
Closing Date
7 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (I) (CG) Goa
Garrison Engineer (I) (CG) Goa HQ Coast Guard DHQ-11 Chicolna PO- Bogmalo Goa 403806
PROVISION OF GARBAGE BINS AND TEMPORARY COLLECTION CENTRE AT TRV CHICOLNA GOA UNDER GE(I)(CG) GOA
2023_MES_593322_1
8340/GOA/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
TRV CHICOLNA GOA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (I) (CG) Goa
₹53,600
Yes
27 Jun 2023
4 May 2023
10 Jun 2023
4 May 2023
7 Jun 2023
19 May 2023
4 May 2023 - 11 May 2023
Amount
SCH A PART-I [GARBAGE BIN] Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/distegrated rock complete all as specified and directed. [Total Quantity= 90.00 (Sch A Part-I) + 60.00 (Sch A Part-III) = 150.00 Sqm]
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. manholes, N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/disintegrated rock complete all as specified and directed. [Total Quantity= 25.00 (Sch A Part-I) + 40.50 (Sch A Part-III) + 28.00 (Sch A Part V) = 93.50 Cum]
M & L Plain cement concrete 1;3:6 type C-2 using 40mm graded stone aggregate in foundation, filling and mass concrete complete all as specified and directed.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in soils complete all as specified and directed. [Total Quantity= 20.00 (Sch A Part-I) + 35.00 (Sch A Part-III) + 11.43 (Sch A Part V) = 66.43 Cum]
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed. [Total Quantity= 5.00 (Sch A Part-I) + 5.50 (Sch A Part-III) + 14.91 (Sch A Part V) = 25.41 Cum]
M & L hardcore using broken stone/boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete as specified and directed. [Total Quantity= 10.00 (Sch A Part-I) + 20.00 (Sch A Part-III) = 30.00 Cum]
M & L Plain Cement concrete (1:3:6), type C2, 75mm thick, using 40mm graded stone aggregate as in sub base complete all as specified and directed.
M & L providing 50mm thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in floor, laid in bays,finished the surface even and smooth with using extra cement complete all as specified and directed
M & L Plain Cement concrete (1:2:4), type B1, 75mm thick, using 20mm graded stone aggregate as in sub base complete all as specified and directed.
S & F Glass dividing strips 3mm thick and 38mm wide as in floor etc complete all as specified and directed. [Total Quantity= 30.00 (Sch A Part-I) + 65.00 (Sch A Part-III) = 95.00 RM]
M & L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar of type C1(using 20mm graded stone aggregates) 1:3:6 setting in cement mortar 1:6 complete all as specified and directed. [Total Quantity= 25.00 (Sch A Part-I) + 41.30 (Sch A Part-III) = 66.30 Cum]
M & L rendering 15mm thick on fair faces of brick wall or stone surfaces manhole/drain in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. [Total Quantity= 130.00 (Sch A Part-I) + 150.00 (Sch A Part-III) = 280.00 SQM]
M & L Plain cement concrete 1:2:4 , type B0 using 12.5mm graded stone aggregates as in for coping including weathering slightly round or champhered angles and throating including necessary formwork complete all as specified and directed.
S & F mild steel work (grade E-250) Gde E-165 framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and directed. [Total Quantity= 251.00 (Sch A Part-I) + 750.00 (Sch A Part-III) = 1001.00 Kg]
S & F Mild steel, plain, black sheet of 1mm thick as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
M & L two coats of Synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and directed. [Total Quantity= 105.00 (Sch A Part-I) + 100.00 (Sch A Part-III) = 205.00 Sqm]
SCH A PART -II [PATH] M & L applying Two or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. [Total Quantity= 130.00 (Sch A Part-I) + 160.00 (Sch A Part-III) = 290.00 Sqm]
M & L excavation over areas not exceeding 1.50m deep and and getting out in soft/disintegrated rock complete all as specified and directed.
M& L Plain cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate of 100mm thick as in sub base complete all as specified and directed.
M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed.
M & L Providing precast Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerbs etc set in cement mortar 1:6 complete all as specified and directed.
Removing excavated materials exceeding 50m but not exceeding 250m and depositing where directed to a level n exc 1.50m above the starting point in rocks complete all as specified and directed.
SCH A PART- III [Temporary Collection Centre] M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M & L 100mm thick Plain Cement concrete, type B-2, 1:2:4 (using 20mm graded stone aggregate) complete all as specified and directed.
M & L Plain Cement concrete (1:3:6), type C2, 100mm thick, using 40mm graded stone aggregate as in sub base complete all as specified and directed.
M & L providing 40mm thick Plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in floor, laid in bays, finished the surface even and smooth with using extra cement complete all as specified and directed.
M & L 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall, finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.
Supply only integral water proofing compound for plastering / concrete work, complete all as specified and directed.
M & L Mild steel, plain, black sheet 1.6mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
M & L applying two coats of distemper oil emulsion over a coat of 2mm thick putty on plastered surfaces with 1st quality including preparation of surface complete all as specified and directed.
M & L Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in Cement mortar(1:6) complete all as specified and directed.
M & L Glazed ceramic colour tiles (300x200) x7mm thick in skirting/dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in Cement mortar(1:4) complete all as specified and directed.
S & F 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and celing or laid in floors etc complete all as specified and directed.
All as per item No. 35 above but 20mm bore complete all as specified and directed.
S & F vitreous China wash basin white flat back, size 630 x 400 mm including PTMT waste coupling 32mm dia (minimum weight 45 gm), chain and plug and porcelain stopper etc complete all as specified and directed.
S & F Pillar cock of 15mm bore, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.
S & F Rolled mild steel roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, etc of FE-410W (Gde-E-250) quality B complete all as specified and directed.
S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers an one hexagonal or square nut, n exc 5cm long of 5 to 10mm diameter shank in mm complete all as specified.
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding, fixed with self tapping screws complete all as specified and directed.
S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in cladding to wall, fixed with self tapping screws complete all as specified and directed.
M & L Providing 40mm thick Plain cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as plinth protection using extra cement complete all as specified and directed
SCH A PART- IV [ E/M PART] M&L Point wiring complete with 1100volt grade PVC insulated unsheathed multistranded 1.5 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC conduit medium grade of suitable size concealed in wall including provision of 1.5 sqmm PVC unsheathed copper conductor and connected to earth dolly, including provision of modular metal fush box module include modular white cover plate with frame top cover for housing switches sockets etc concealed on wall complete all as specified and directed for the following :-
(a) One light point controlled by one way switch 5/6 Amp
(b) One socket point 6 Pin 5/6 Amp on same board
(c) One socket point 6 pin, 5/6 Amp on Independent board
All as per item No 44.00 here-in-before but with PVC FRLS insulated unsheathed multi stranded copper conductor of size 4 sqmm, 1100V grade for 6 pin 6/16Amps switch socket on independent board with PVC FRLS insulated unsheathed copper conductor of size 4 sqmm using as earth continuity wire and connected to common earth dolly complete all as specified and directed.
S & F Modular switch 1 way 6A, 1 module complete all as specified and directed.
S & F Modular switch 1 way 16A, 1 module complete all as specified and directed.
S & F Modular socket 6 A, 6 pin, 3 module complete all as specified and directed
S & F Modular socket 16 A, 6 pin, 3 module complete all as specified and directed
S & F Modular white cover plate with frame 1 module complete all as specified and directed
S & F Modular white cover plate with frame 3 module complete all as specified and directed.
S & F Modular white cover plate with frame 6 module complete all as specified and directed.
S & F Modular metal flush box 1/2 module complete all as specified and directed
S & F Modular metal flush box 3 module complete all as specified and directed
S & F Modular metal flush box 6 module complete all as specified and directed
S & F in repairs LED tube light fitting 1 x 18 W, 230V wall mounted integrated batten, 4 ft LED module fixed on wall/surface/ceiling shall confirm to IS 16103 and shall bear BIS certification marking complete with all accessories internally pre- wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed. [Model:- Luker cat part No LT518ECL or similar make mentioned in Particular specification]
S & F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
M & L MCB distribution board, double door CRCA steel sheet enclosure powder coated, SPN 8 Way as in replacement with 200 Amp rated bus bar complete all as specified and directed.
M & L Isolator SPN 20-40 Amp, 240 Volt as in replacement complete all as specified and directed.
M & L MCB SP 6-32A, 240 Volt 'B' Curve as in replacement complete all as specified and directed.
M & L Sub main wiring as of PVC FRLS insulated unsheathed two single core 4.00 sqmm copper multi stranded conductor including one run of single core copper conductor of size 4.00 Sqmm FRLS as earth wire drawing in existing concealed complete all as specified and directed. [Note:- 2 run of main wire, one run of earth wire shall be measured in one run]
M & L Earthing complete with galvanized iron earth plate electrode 600x600 x6.0mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level ,connected to galvanized iron strip of size 32x6 mm as earthing lead by means of nuts and bolts check nuts and washers of galvanized iron connected to test point, GI tubing 40mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt,Ci cover with suitable handle,PCC pit 1:2:4 including earth work in any type of soil and connecting to earthing test point/panel and testig on completion all as shown on electrical plate No -3 of SSR 2009- Part 1 complete all as specified and directed.
SCH A PART-V [ EXTERNAL ELECTRIC SUPPLY] Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2.0 core complete all as specified and directed.
Supply/ Lay dry river sand/ M sand in trenches for cable protection complete all as specified and directed. [Note:- Punned thickness only will be measured & Paid]
Supply and lay cable cover LV type 1 flate size 250X150X40mm for cable protection complete all as specified and directed.
SCH A PART-VI [ EXTERNAL WATER SUPPLY] Supplying and laying 25mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.
Supplying and fixing CPVC Ball Valve 25mm outer diameter complete all as specified and directed.
M/s. P S REDDY
M/S Kartik Enterprises
M/S P S BABU
RS ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .