Estimate for Repairing and Replacing of gates and gearing system of Cross regulator at RD 266739 of Sirhind feeder

Providing and Fixing of Gate wheel assembly complete in all respects and to entire satisfaction of Engineer in-charge.

Providing Gun Metal Bush Assembly complete in all respects and to entire satisfaction of Engineer in-charge

Providing of roller pin in position complete in all respects and to entire satisfaction of Engineer in-charge. (upto 75 mm /above 75 mm Dia.)

Providing of Hook pin in position complete in all respects and to entire satisfaction of Engineer in-charge. (upto 75 mm /above 75 mm Dia.)

Threading of pins, complete in all respects and to entire satisfaction of Engineer in-charge upto 75 mm

Providing hollow bulb seal and fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in-charge. (100/44 mm)

Providing fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in-charge. (75 x12 mm)

Providing and Fixing Stainless Steel nut and bolts of all sizes and length required complete in all respects.

Providing & fixing clamp plate for seals complete in all respects.

Providing and Fixing bottom & side seal square Bar support

Providing and Fixing skin plate for Gates (10 mm)

Providing and fixing horizontal & vertical stiffner on Gates

Providing and fixing Hook Plates on Gates

Providing and fixing stiffener Angle on Gates

Providing and fixing of Gate wheel cover Plate 10 mm

Fillet welding with strength steel rods complete in all respects and to entire satisfaction of engineer incharge

Dismantling of central drive unit & rope drum at site complete in all respects.

Dismantling of damaged wire rope/de-linking gates and Hoist Mechanism complete in all respect and to entire satisfaction of engineer in- charge

Supply of installation of new steel wire rope in position including linking gate and host mechanism for smooth balance operation including oiling and greasing complete in all respects as per specification 637 IS Code 2266 and to entire satisfaction of engineer-in-charge. (Size 20-30 mm dia.)

Providing & fixing U-Clamps for steel wire ropes.

Overhauling of gate mechanism of all types including dismantling, greasing, oiling and re-installation of mechanism complete in all aspects. (more than 10 feet upto 30 feet width of gate)

Painting two or more coats of anticorrosive bitumastic paint to give an even shade

Appling Priming coat with metal primer on new steel or iron work including preparation of surface

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic, plastered or concrete surfaces to give an shade.

Scrapping , brushing to remove paint to bare metal surface

Commissing and testing of gates at site complete in all respects and to entire satisfaction of Engineer incharge

Dismantling, loading/ unloading and refitting of gates at site with the help of 35 tonne capacity crane.

Removing, providing & fixing bearing bracket, complete in all respects

Removing, providing & fixing bearing, complete in all respects

Drilling/Boaring hole including rimming complete in all respects and too enitre satisfaction of Engineer Incharge.

Any Other Item(CSR+SP)

JAGIR SINGH CONTRACTOR

M/S DARSHAN SINGH CONTRACTOR

ANJU INDUSTRIES

Vishalsood Govt contractor