REPAIRS / CLEANING OF SEWAGE LINES AND REPAIRS OF PERIMETER WALL INCLUDING ANGLE IRON BARBED WIRE FENCING AT CERTAIN PLACES AT AF STN MADH ISLAND UNDER GE AF THANE

Amount

M&L for two labour for cleaning /clearing of blockage of manholes, gully traps, floor traps, vertical soil/waste pipe of different dia (upto four storey bldg) and sewage line the area of the AFS Madh Island (Domestic / Technical area). a) The labour (02 nos) will report daily at 0845 hrs on all working days including Sundays and holidays at complaint cell centre and attend complaints given by Engr -In- Charge . Complaints needs to be cleared within 24 hrs after receiving the complaints. The contractor will deploy requisite labour and supply all T&P ( mechanical Iron rods, knot ropes , bamboo etc.) scaffolding ladders any other materials required to clear the blockages at the site without any extra cost .Labour for cleaning of sludge from sewage lines (any dia) to manhole is included in quoted rates. In case any labour does not report to Engineer In Charge for the whole day or found missing more than half an hour on any day, Panel recovery @ RS.860/- per head per day shall be made proportionally from contractor's dues. b) The recovery will be made from the contractor @250 Rs per complaint which are not cleared within 24 hrs from the date and time of receipt of complaints. Decision of Engr-In- Charge is final in this respect. Two persons will be provided by the contractor at site. The above item includes conveyance cost of labour with their tools to travel from pocket to pocket to attend complaints including removal of sludge from the site outside MOD land to a distance not exc 5km (The department shall not be liable to provide any kind/form of transportation to the labour). (c) Registers of labour attendance and complaints shall be maintained by contractor at their own cost, which shall be kept in the custody of MES Department(complaint cell) duly signed by contractor's representative ,JE(civil) and Engineer in charge. Note: For more details Please ref PS Clause No 40.

Opening of cover ,de-watering and taking out sludge from septic tank of any size and removing sludge out side MD land and cleaning the septic tank as per BMC rules and placing cover in original position,complete all as specified and directed by Engr-in-Charge.

Opening of cover ,de-sludging ,Cleaning of gully trap and refixing in the position, complete all as specified and directed by Engr-in-Charge..

Opening of cover ,de-watering and taking out sludge from manhole not exc 1.50m in depth ,complete all as specified and directed by Engr-in-Charge.

Opening cover ,de-watering and taking out sludge from manhole exc 1.50m in depth ,complete all as specified and directed by Engr-in-Charge.

Demolition of brick masonary built in cement mortar including all quions, arches, pillars etc but including ashlars facings, dressed stone work and pre cast concrete articles all as specified and directed by Engr-in-Charge and getting out in hard dense soil.

M&L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in benching and coping ,complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. ,complete all as specified and directed by Engr-in-Charge.

M&L for brickwork with subclass ‘B’ brickwork straight on plan exc 6m mean radius with old size bricks built in CM 1:4 ,complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick on other than fair faces of brick work/stone surface in cement mortar 1:4 mixed with water proofing compound including finished even and smooth with using extra cement for manholes ,complete all as specified and directed by Engr-in-Charge Note :- WPC will be measured and paid separaterly.

Supply only integral water proofing compound ,complete all as specified and directed by Engr-in-Charge

M & L ,PVC (SWR) multi floor trap plain of 63mm outet Dia with grating including jointing with solvent cement ,complete all as specified and directed by Engr-in-Charge

M & L ,PVC (SWR) multi floor trap plain of 75mm outet Dia with grating including jointing with solvent cement ,complete all as specified and directed by Engr-in-Charge.

M & L , PVC (SWR) Gully Trap 125/110 mm ,setting and jointing with solvent cement,complete all as specified and directed by Engr-in-Charge

M & L PVC (SWR) Nahani trap plain of Dia 75mm with grating including jointing with solvent cement ,complete all as specified and directed by Engr-in-Charge.

S & F in repair PVC SWR pipes single socketed, in any length with rubber ring joints laid in trenches or in floors 110mm dia ,complete all as specified and directed by Engr-in-Charge.

S & F in repair PVC SWR bends of 110mm bore ,complete all as specified and directed by Engr-in-Charge.

S & F in repair PVC SWR bends of 75mm bore ,complete all as specified and directed by Engr-in-Charge.

S & F in repair PVC SWR branch piece doule Y equal or unequal 75 mm bore ,complete all as specified and directed by Engr-in-Charge.

S & F in repair PVC SWR branch piece ,single y equal or unequal of 75mm bore ,complete all as specified and directed by Engr-in-Charge.

S & F in repair PVC SWR branch piece single Y equal or unequal 110 mm bore ,complete all as specified and directed by Engr-in-Charge.

S & F PVC (SWR ) Couplers 75mm bore,complete all as specified and directed by Engr-in-Charge.

S & F PVC (SWR) Couplers 110mm bore ,complete all as specified and directed by Engr-in-Charge.

S & F PVC (SWR) reducer 110mm bore ,complete all as specified and directed by Engr-in-Charge.

S & F in repair PVC SWR branch piece doule Y equal or unequal 110 mm bore, complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description as in any position & removing Demolition materials , complete all as specified and directed by Engr-in-Charge.

M&L for providing precast cement concrete type B1 1:2:4 (20mm graded stone aggregate) in apex stones,etc including chamfers,weatherings throating etc and setting in mortar 1:4 (for manholes etc.) ,complete all as specified and directed by Engr-in-Charge.

M&L for TMT steel bars 6mm dia to 8mm dia & over cut to length bent to shape required including cranking bending spirally for hoping for columns and binding with MS wire not exc than 0.9mm dia. ,complete all as specified and directed by Engr-in-Charge.

Excavation in trenches n. exc 1.5m wide and n. exc 1.5m depth for foundation etc and getting out in hard/dense soil ,complete all as specified and directed by Engr-in-Charge.

Demolition PCC and taking up break/decayed drain pipe (Salt glazed ware, AC or Reinforced concrete) 150 mm dia pipe from Cement mortor and depositing the debries where as directed to a distance n exc. 50m ,complete all as specified and directed by Engr-in-Charge. .

Demolition PCC and taking up break/decayed drain pipe (Salt glazed ware, AC or Reinforced concrete) 100 mm dia pipe from Cement mortor and depositing the debries where as directed to a distance n exc. 50m ,complete all as specified and directed by Engr-in-Charge.

S&F 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed as specified and directed by Engr-in-Charge ,complete all as specified and directed by Engr-in-Charge.

S&F 100mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed as specified and directed by Engr-in-Charge ,complete all as specified and directed by Engr-in-Charge.

M&L concrete bed of cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) to drain pipes including packing under ,and hunching against the sides of pipe after they are laid and tested for bore of pipe is 150mm complete all as specified.

M&L concrete bed of cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) to drain pipes including packing under ,and hunching against the sides of pipe after they are laid and tested for bore of pipe is 100mm complete all as specified and directed by Engr-in-Charge.

Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm and directed by Engr-in-Charge.

Removing excavated material (Soil) exc. 500m but n exc. 1.50 km distance and depositing where directed by Engr-in-Charge.

M & L For cleaning of OH PVC Service Tank internally by bailing out of water/sludge from bottom of sump, removing all scale, dirt, alges and other growths from entire surfaces of tank and from mouths of circulating pipes by rubbing with wire brushes and by high pressure cleaning method with roatary sets with approved detergents and sucking all dirty water by a vaccum cleaners, disinfecting the tank with approved chemical/bleaching powder for making the surfaces bacteria free and cleaning with fresh water, all as direced by Engg-in-charge. (a) Overhead reservior upto 500 Liters of capacity

ditto as item No 38 above but exc 500 ltr of capacity and n.exc 1000 ltrs capacity and directed by Engr-in-Charge.

S&F in repairs CI water tanks cover including locking device suitable for water tank of any capacity and having wt. not less than 13 Kg complete as per approval of BMC and directed by Engr-in-Charge.

Dismantling fencing wire/wire mesh of any type and directed by Engr-in-Charge.

M& L dismantling wrought iron or mild steel work of any description ,angle iron posts or struts embedded in concrete, any section, including taking out embedded portion and making good disturbed portion,including-removing wire fencing of any type, complete all as specified and as directed at site

Fixing only angle iron fixed independently without connecting plates, etc shape as directed by Engr-in-Charge/GE including fabrication etc completes and directed by Engr-in-Charge.

M&L for joist,channel ,angle or tee sections fixed independently ,without connecting plates as in post, struts in fencing including necessary drilling holes, notching for wires etc (cut to ordinary lengths ie with in 20mm of the length indicated) Fe-410-W(Gde-E-250) quality-B (Angle Iron. 50X50X6mm)

Demolition of cement concrete unreinforced of any description and in any position not otherwise provided for etc completed

M&L for walling of random rubble, uncoursed ,well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M & L for Walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in CM 1:6 Except stones complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in bed block,coping, kneelers, apex stone,bed plates etc ,complete all as specified and directed by Engr-in-Charge.

M&L for broken glass coping with minimum 10kg/sqm of bottle or thick glass on top of walls emebeded in 25mm layer of cement mortar CM 1:3 etc ,complete all as specified and directed by Engr-in-Charge.

M&L for racking out joints/pointing to random rubble or polygonal rubble uncoarsed or brought up to course built in Cement mortar etc ,complete all as specified and directed by Engr-in-Charge.

M & L for Extra over Hammer dressed facings with maximum depression on face from straight edged held against the dressed surface n,exc 20 mm to block in course masonry Granite or Trap stone (rock faced), complete all as specified and directed by Engr-in-Charge.

M&L for raised pointing to random or polygonal rubble, uncoursed rubble masonry, or brought upto courses in Cement mortor 1:4 etc complete all as specified and directed by Engr-in-Charge.

Painting to steel surface with two coats epoxy paint over a one coat of epoxy primer including preparation of new surface of any description over 10cm width or girth not otherwise described complete all as specified and directed by Engr-in-Charge.

Painting to steel surface with two coats epoxy paint over a one coat of epoxy primer including preparation of old surface of any description over 10cm width or girth not otherwise described complete all as specified and directed by Engr-in-Charge.

M&L galvanized Concertina coil in repairs, duly stretched, maintaing a dia of 600mm, concertina coil placed in Y shape angle iron post erected over boundary wall and fixed to angle iron with 3mm dia GI bearer wire, complete all as specified and as directed at site complete all as specified and directed by Engr-in-Charge.

S & F in repair,Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) etc complete all as specified and as directed at site by Engr-in-Charge.

venus enterprises