Estimate for construction of Gauge Hut at Rohti Pull and Bhore Shyphon

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Cement concrete 1:3:6 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

PLASTERING & POINTING 12.5 mm thick cement plaster 1:4

Supplying, fitting and placing HYSD bar reinforcement in substructure complete as per drawing and Technical Specifications

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications