Development and Beautification of C.D.A.O Campus, Subarnapur including a Design of External Facade, Boundary Wall, Main Gate, Land Scaping etc. District-Subarnapur

Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of the materials for reuse and removingb the debris within 50m lead

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately.

Dismantling brick or stone masonry in lime or cement mortar upto 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead

Scraping old paint with scrapers, sand papering and washing with soap water or soda including scafolding charges upto 5m height.

Scraping old paint with scrapers, sand papering and washing with soap water or soda including scafolding charges upto 5m height upto 8m height.

Finishing exterior walls with Weather Seal Coat Paint of approved shade on new work two coats to give an even shade complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC.

In ground floor

In first floor

Supply and fixing of MCM Modified Clay Material - MCM A Series Brick - 240 x 60 mm of PHOMI make as per company standard dimension, pattern, colour as specified, manufactured through unfired patented manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation - Class A— ASTM E84- 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge.

Supply and fixing of MCM Modified Clay Material - MCM R Series Brick (087089) - 222 x 63 mm of make, as per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation - Class A— ASTM E84- 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge.

Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling with a lead of 50m and making up the trenched to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth,sludge or manure).

Supplying and stacking of good earth at site including royalty and carriage(earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment).

Rough Dressing the trenched ground including breaking clods

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Fine dressing of the ground

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Plantation of Trees, Shrubs and Hedge/Ground Covers at site i/c watering and removal of unserviceable material as per direction of officer in charge including cost of material. (Rate of material as per Quotation)

Kamini mini (Murraya paniculata)

Table palm (Livistona chinensis)

Creeping Fig (Ficus Pumila)

Oriental Thuja Platycladus orientalis with Pod

Kashmiri Gulab

Mini Ixora

Singapore ixora

Spathodia (21 size pkt)

Supplying, fitting and fixing of French type drainage using 75 mm outside diameter P.V.C. S.W.R. S/S Pipe (ISI Type–A) laid to proper grade, with filter media consisting of 20 mm down–sized hard granite chips packed around the pipe, including provision of 75 mm dia plain bends for joining adjacent PVC pipes, 75 × 75 × 75 mm dia PVC SWR Tees for outlet connections, and providing and fixing geotextile (standard non–woven) for lining and wrapping of the drain media; complete with cost, conveyance, royalty and taxes of all materials, cost of all labour with T&P, excavation of trench to required size and depth, backfilling, watering, ramming and finishing the work etc. complete, as directed by the Engineer–in–Charge.

Clearing grass and removal of rubbish up to a distance of 50m outside the periphery of the area.

Earthwork in excavation of foundation in all kinds of soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 m in depth including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work etc. complete as per the direction of the EIC.

For ordinary compaction by Power Road Roller per day (Ordinary compaction by Power Road Roller) 708 cum

Supplying and spreading 40mm to 20 mm size granite metal filter in horizonatal fiter zones and filter blankets including levelling etc complete within initial lead as directed by EIC.

Supplying, Filling sand in foundation & plinth well watered and rammed including cost, conveyance, taxes, royalty of sand, labour & T&P etc. complete as per specification and direction of the EIC.

Cement Concrete (1:4:8) by using 40 mm size hard granite crusher broken stone metal of approved quality and from approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work etc. complete as per the direction of the EIC.

Plain cement concrete (1:2:4) using 12 mm size hard granite crusher broken chips of approved quality and form approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work etc. complete as per the direction of the EIC.

Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.

Supplying, fitting and fixing of R.C.C. (1:2:4) fencing posts with chips 1.68m long 13cm*13cm at bottom and 8cm*8cm at top and 30cm*30cm*8cm base finished smooth.

Labour for fixing barbed wire fencing and post by means of staples and straining hooks by means of tying with G.I. wire and including cost of staples, hooks and tying wires

Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.

Reinforced Cement Concrete M20 grade 20mm & down graded size hard granite crusher broken chips of approved quality and from approved quarry including centring, shuttering, lowering, laying concrete, watering and curing etc. complete for required levels laid in layers including cost, conveyance, royalty and taxes of all materials and cost of labour, T&P required for the work etc. complete as per specification and direction for the EIC.

Column base, frustum, plinth band

Column and beam (Ground Floor, upto 3.3 m height)

Column and beam (1st floor, above 3.3 m height)

Supplying MS round / deformed / tor steel reinforcement bars (of only manufacturing companies such as SAIL / RINL / TATA / JINDAL STEEL / SHYAM STEEL) (of approved grade) of required diameters of approved quality including straightening, cutting to size, bending, and binding, lifting and placing in position as per design, complete including cost of bars, binding wires 18 gauge, including cost of all materials , labour, conveyance, loading and unloading, taxes, cess, royalties. sundries, tools and plants etc. complete as per the direction of the EIC. (Linear measurement will be taken and quantity will be calculated on standard weight for all heights)

Providing Fly Ash brick masonry work using 230 mm X 110 mm X 80 mm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand) (Using Branded Cement), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc., complete as per the direction of the EIC.

Plinth & Foundation work

Superpstrucutre work in ground floor

Superpstrucutre work in second floor

Fixing Granite Tiles above 0.4 Sqm (20 mm thick) in Dado, Skirting and rises of steps on 12 mm thick cement mortar [1:3] joined with neat cement slurry mixed with pigment to match the shade of the Tiles including rubbing and polishing complete including rubbing and polishing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

In ground floor (upto 3.3 m)

In first floor (Above 3.3 m elevation from ground)

Supplying, fitting and fixing of powder coated M.S. collapsible gate/Window grill/Ventilator/Railing etc made out of M.S. square bar / M.S. flats / M.S. angles/MS pipe as per approved drawing and design, cutting to required size and welding properly, finished smooth and sand papering, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T&P etc. as required for the work complete as per direction in all floors.

Entrance Gate

Others

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wihout charcoal and salt) as required.

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marke

d mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. [Group-C]

Point wiring for 15/16 amp socket outlet with 2*4 Sq-mm FR PVC insulated single core multi strand coppor conductor of ISI marked in reces 20 mm dia non-metalic PVC flexible conduit with modular switch, phenolic laminated sheet suitable size ISI marked modular box and earthing point with 1*2.5 Sq-mm FR PVC insulated single core multistrand coppor conductor for loop earthing etc as required. (Make of wire Finolex/Anchor/V-guard/Finolex/Greatwhite etc)

Suppying and fixing Porcelain 22"x 16"(550x400) Wash Hand Basin with approved make & model with CI brackets painted white including cutting holes in walls for pillar taps and making good the damages with supply of wooden plugs, screws and cement etc including fixing Chromium Plated waste pipe of 32 mm nominal diameter, Chromium Plated Pillar taps & Chromium Plated Angle Valve of 15 mm dia nominal bore with approved make & model, 15 mm dia PVC inlet connection pipe as per P.H specification including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work complete as per the direction for the EIC.

Providing and fixing 10 litre capacity - White P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete

Providing and erection of MS Angle fabricated trusses and purline as per the drawing & design approved by deppt with hoisting joists and trusses and placing in position

Providing & fixing Pre painted G.C.I. Sheets in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC.