SPECIAL REPAIR TO REPLACEMENT OF LT PANEL BOARD LT DISTRIBUTION SYSTEMS AND ALLIED WORKS AND SPECIAL REPAIR TO BN STORE BLDG NO P-85 OF 164 MTN BDE CAMP AT PEDONG UNDER GE 867 EWS

Amount

Dismantling of plain or corrugated steel sheeting any gauge and thickness including Nanital or similar pattern roof covering, complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws, complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.4mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws, complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store, complete all as specified and as directed. (measured overall as fixed along the centre line over fittings and accessories)

S&F 1.25mm thick Mild steel sheet / PVC eaves gutters, 150mm dia, galvanised class 3, half round with rounded edges, complete all as specified and as directed.

S&F 150mm dia Mild steel sheet of 1.25mm thk/ PVC drop ends (for spigot or socket ends) or nozzles, complete all as specified and as directed.

S&F 150mm dia Mild steel sheet of 1.25mm thk/ PVC stop ends (for spigot or socket ends) or nozzles, complete all as specified and as directed.

Preparation of old painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying one coat of Ist grade enamel paint over a coate of red oxide primer zinc chrome, complete all as specified and as directed.

Preparation of new painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying one coat of Ist grade enamel paint over a coate of red oxide primer zinc chrome, complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not other wise specifically provided for, complete all as specified and as directed.

S&F mild steel work as in band, strap, supports or stay for rainwater, ventilating pipes incl bolts if reqd, hoocks and similar small articles conforming to Fe 290 Gde -E-165, complete all as specified and as directed.

S&F roof trusses, framed trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle channel or flat section) incl distance pieces, cleats, nut and bolts conforming to FE-410w (grade 250-E quality A), complete all as specified and as directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/ blankets any thickness, including cover fillets, complete all as specified and as directed.

S&F 605 X605 mm GI frame work for for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from suffit at approx 900 mm centre to centre with GI cleats and steel expansion fastner with and including ceiling section (not exc 1.2 m length)of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10 .5 mm fixed to the intermediate channel with connecting clieats across the intermediate channel at 457 mm centre to centre, complete all as specified and as directed.

S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long, complete all as specified and as directed.

M&L 4mm thick asbestos cement plain building boards, fixed or laid /inserted to GI snap grid framework with screw in ceilings, complete all as specified and as directed.

M&L three coats of white wash on ceiling on AC boards, complete all as specified and as directed.

Dismantling of timber in scantling 40 sqcm and over in section in any position in unframed work, complete all as specified and as directed.

M & L clean sawn 2nd class hard wood in scantling,clean sawn,fixed as scantiling, complete all as specified and as directed.

Demolition of reed, lathing, single or Double and plaster or chicken wire lathing on walls, complete all as specified and as directed.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks exc 10cm in width and setting in CM (1:6), complete all as specified and as directed.

Taking down cement plaster of any description from stone walls incl raking out joints hacking for key, scrubing down with water etc, complete all as specified and as directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6) on internel wall, complete all as specified and as directed.

M & L 15 mm thick rendering on fair faces of brick work concrete surface in CM (1:4) on externel wall with water proofing compound, complete all as specified and as directed. Note : WPC will be measured and paid separately.

Supply only integral water proofing compound, complete all as specified and as directed.

M & L for Preparing newly plastered surfaces of wall and applying two coat of distemper dry ,white or tinted over chalk whitining primer over 3mm thick layer of putty, complete all as specified and as directed.

M & L for Preparing old surfaces of wall, complete removal and applying two coat of distemper dry ,white or tinted over primer over 3mm thick layer of putty, complete all as specified and as directed.

M&L for preparing of existing surface and applying two coat of cement base paint, complete all as specified and as directed.

M&L for preparing of new surface and applying two coat of cement base paint, complete all as specified and as directed.

Taking down chowkats frames but with shutters (with out taking off shutter from the frames) exc 1.5 sqm but not exc 4.00 sqm each, complete all as specified and as directed.

Taking down chowkats frames but with shutters (with out taking off shutter from the frames) n.exc 1.5 sqm each, complete all as specified and as directed.

S&F steel ventilator fixed type with glazing bar, complete all as specified and as directed.

S&F steel window with side hung shutter, incl projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded, complete all as specified and as directed.

M&L for Mild steel work as in guard bars for window frames, L or T section supports for sheleves etc.and similar articals confirming to FE-290 GDE E-165, complete all as specified and as directed.

S & F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane, complete all as specified and as directed.

S&F Pressed steel door frames of size 125x60 mm for door with one or more rebates including necessary fixing lugs, hings, lock strike plate etc, complete all as specified and as directed.

S & F 30mm thick flush door shutters , solid core construction with black board core and plywood face panels,commercial type on both face complete all as specifiedhard & fitted to chowkats, complete all as specified and as directed.

S&F 200mm size aluminium anodised barrel tower bolts of extruded sections, complete all as specified and as directed.

S & F 150mm size aluminium handle cast type anodised, complete all as specified and as directed.

S & F 250 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed, complete all as specified and as directed.

S&F in repairs 20mm dia curtain rails, mild steel, chromium plated with incl fixing brackets, stops, rollers etc, complete all as specified and as directed.

M&L prepration of newly wooden surfaces of any description & applying two coats of synthetic enamel paints over one coat of pink primer incl prepration of surfaces, complete all as specified and as directed.

Demolition of cement concrete(Unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level), complete all as specified and as directed.

M&L 75 mm thick PCC type C-2, 1:3:6 (40mm graded stone aggt) as in path, plinth protection etc, complete all as specified and as directed.

Forming construction joint (dummy) joints 65mm deepx 10mm wide filled with sealing compound grade A, complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement morter bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and as directed.

M & L machine cut kota stone slab flooring 20-25 mm thich over cement screed base includind 15 mm thick sreed bed or bedding layer of cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match tis shade of the slab including rubbing and polishing, complete all as specified and as directed.

M & L machine cut kota stone slab flooring 20-25 mm thich in riser of steps, skirting, dado and pillar over cement screed base includind 10 mm thick sreed bed or bedding layer of cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match tis shade of the slab including rubbing and polishing, complete all as specified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and as directed.

M&L for reinfored cement concrete (nominal mix) in 1:2:4 type B1 (using 20mm graded aggregate) as in beams, lintels over 1.5m span, complete all as specified and as directed.

M&L for reinfored cement concrete (nominal mix) in 1:2:4 type B1 (using 20mm graded aggregate) as in slabs supported on walls, beams, columns and shelves and the like, complete all as specified and as directed.

Formwork to sides and soffits of pillars, posts, piers, columns etc, complete all as specified and as directed.

Formwork to sides and soffits of lintels, shelves including suppotrts, beams etc in rough finished and flat surfaces of concrete, complete all as specified and as directed.

M&L for mild steel deformed TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally etc and binding with M.S. wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed.

All as per item no.54 but 5mm dia & over upto and incl 10mm dia in stirrups, spacers and binders, complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work, complete all as specified and as directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc, complete all as specified and as directed.

S&F in repair of 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F in repair PVC (SWR) bends 110mm dia, complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and as directed.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 3.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 3.0 mm thick Laminated sheet top covers etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly, complete all as specified and as directed. Make : Polycab/Havells/RR Cables/KEI

All as per item No 61 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on same board.

All as per item No 61 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board.

All as per item No 61 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.

Supply and fix switch piano flush button, single pole, 5 amps, one way, complete all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal, complete all as specified and as directed.

Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type, complete all as specified and as directed.

Supply and fixing switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type universal, complete all as specified and as directed.

Supply and fixing energy efficient LED tube lights fitting 4", 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED light fitting 1x9W/10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unsv fitting, complete all as specified and as directed.

S&F lamp/angle holder insulated body with back plate for batten fitting, complete all as specified and as directed.

S & F in LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 12 W, complete all as specified and as directed.

S&F LED security light suitable for 35 W LED with pressure di cast housing with epoxy power coated drak graphite grey colour finish , Prismatic ploycarbonate cover with individual LED lenses, IP65 by using 25mm dai GI bracked fixed on wall by means of nuts, botls and clamps, complete all as specified and as directed.

M&L Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the concealed to wall/ceiling including one run of 4 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor, complete all as specified and as directed. NOTE : Two runs of single core 4 sqmm and one run of 4 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC, complete all as specified and as directed.

Supply and fix MCB single pole (SP), 10 kA of 5 -32 Amps capacity 240 Volts, 'C' curve, complete all as specified and as directed.

Supply and fix MCB single pole neutral, 10 kA of 40 Amps capacity 240 Volts, 'C' curve, complete all as specified and as directed.

Excavation in trenches in hard/dense soil not exc 1.5 mtr wide and not exc 1.5 mtr deep in for lying of electric cable, pole foundation and stays etc and getting out, trimming the sides, forming bottom surfaces to required level, complete all as specified and as directed.

Returning filling including spreading leveling watering and well ramming in layers not exc 25 cm in soft/ loose soil, complete all as specified and as directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and as directed.

M&L for sand cushioning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches, complete all as specified and as directed. Note :- Only Punned layers shall be measured.

Supply and laying reinforced precast concrete cable cover class LV type 1 flaat size 250mmx150mmx40mm laid in trenches for cable protection, complete all as specified and as directed.

M&L for brick protection over cables inside the trench by using common burnt clay building bricks,locally available best quality, complete all as specified and as directed.

Cutting existing metal road/PCC foot path not exc 0.45 m width and not exc 0.60 m in depth including all connected earth work and making good disturbed surfaces to match with the existing surface in similar specification and finish, complete all as specified and as directed.

S&F GI Pipe 25 mm dia bore light grade with all fittings for passing of cables fixed to pole / wall / laid under floor or roads including all fixing accessories, complete all as specified and as directed.

All as per item No 85 here – in – before but for 40mm dia complete all as specified and directed.

All as per item No 85 here – in – before but 80 mm dia complete all as specified and directed.

Supplying , Laying in trenches XLPE insulated,sheathed, armoured,heavy duty electric power cable 70 Sqmm 3.5 core with aluminium conductor multy stranded. Suitable for 1100 Volts grade, icluding necessary cable glands and aluminium lugs and having cross sectional area of following sizes, complete all as specified and as directed.

All as per item No 88 here – in – before but 50 Sqmm 3.5 Core omplete all as specified and directed.

All as per item No 88 here – in – before but 25 Sqmm 3.5 Core complete all as specified and directed.

All as per item No 88 here – in – before but 16 Sqmm 4 core complete all as specified and directed.

All as per item No 88 here – in – before but 10 Sqmm 4 core complete all as specified and directed.

All as per item No 88 here – in – before but 10 Sqmm 2 core complete all as specified and directed.

Supply, fabricate, erect, connect, test and commissioning of factory made, CPRI approved, cubical type, Outdoor type LT panel board, double door, totally enclosed, dust, weather and vermin proof 1100 Volt, 3 phase, 4 wire system, 50 HZ , 415 volt supply made out by 3.15mm thick CRCA sheet for load bearing and 2mm thick for non load bearing, fully compartmentalised, with IP - 65 protection, painted with powder coated paint, and 4 side slanting canopy type roof on top, danger notice board, Suitable size of angle iron padastal frame with nut and bolt (65 x 65 x 6mm) 600mm hight above ground level including PCC work and dismantling of old LT panel and refixing existing cable connection with new cable lugs as per conforming to IS-2417 of 1962, complete including the following accessories for each set, complete all as specified and as directed.(Loc- Sikkim sqd area). (a) 4 Nos bus bar of equal size made out of copper bus bar of suitable size with PVC insulated coloured heat shrinkable type sleeves, of rating 400 Amps, for looping and branch connection system, mounted on non cracking resin type insulators - 01 Job. all outgoing mccb shuld be connected through adiquated size of bus bars. Make of MCCBs from Legrand/ Schneider/ Siemens. (b) TPN, 4 Pole, MCCB ( Thermal magnetic protection) 250 Amps, 415 Volt, 50KA - 01No. (incoming) (c) TPN, 4 Pole, MCCB ( Thermal magnetic protection) 160 Amps, 415 Volt, 50KA - 02No. (Outgoing) (d) TPN, 4 Pole, MCCB ( Thermal magnetic protection) 100 Amps, 415 Volt, 50KA - 02No. (Outgoing) (e) TPN, 4 Pole, 'C' curve MCB 63 Amps, 10 KA - 01No. (Outgoing) (f) TPN, 'C' curve MCB 32 Amps, 10 KA - 01No. (Outgoing) (g) SPN, 'C' curve MCB 32 Amps, 10 KA - 01No. (Outgoing) (h) Indication lamps R, Y & B - 01 Set (i) Provisioning of copper tinned cable glands for incoming and outgoing cables - 01 Job. (j) Provision of 3 phase, 3 display multi functional meter. with CTs and PTs (V, A, W, PF, VA, WH) Legrand 414991 -01 set

Supply, fabricate, erect, connect, test and commissioning of factory made, CPRI approved, cubical type, Outdoor type LT panel board, double door, totally enclosed, dust, weather and vermin proof 1100 Volt, 3 phase, 4 wire system, 50 HZ , 415 volt supply made out by 3.15mm thick CRCA sheet for load bearing and 2mm thick for non load bearing, fully compartmentalised, with IP - 65 protection, painted with powder coated paint, and 4 side slanting canopy type roof on top, danger notice board, Suitable size of angle iron padastal frame with nut and bolt (65 x 65 x 6mm) 600mm hight above ground level including PCC work and dismantling of old LT panel and refixing existing cable connection with new cable lugs as per conforming to IS-2417 of 1962, complete including the following accessories for each set, complete all as specified and as directed.(Loc- HQ 164 BDE) (a) 4 Nos bus bar of equal size made out of copper bus bar of suitable size with PVC insulated coloured heat shrinkable type sleeves, of rating 400 Amps, for looping and branch connection system, mounted on non cracking resin type insulators - 01 Job. all outgoing mccb shuld be connected through adiquated size of bus bars. Make of MCCBs from Legrand/ Schneider/ Siemens. (b) TPN, 4 Pole, MCCB ( Thermal magnetic protection) 200 Amps, 415 Volt, 50KA - 01No. (incoming) (c) TPN, 4 Pole, MCCB ( Thermal magnetic protection) 160 Amps, 415 Volt, 50KA - 01No. (Outgoing) (d) TPN, 4 Pole, MCCB ( Thermal magnetic protection) 100 Amps, 415 Volt, 50KA - 02No. (Outgoing) (e) TPN, 4 Pole, 'C' curve MCB 63 Amps, 10 KA - 01No. (Outgoing) (f) TPN, 'C' curve MCB 32 Amps, 10 KA - 01No. (Outgoing) (g) SPN, 'C' curve MCB 32 Amps, 10 KA - 01No. (Outgoing) (h) Indication lamps R, Y & B - 01 Set (i) Provisioning of copper tinned cable glands for incoming and outgoing cables - 01 Job. (j) Provision of 3 phase, 3 display multi functional meter. with CTs and PTs (V, A, W, PF, VA, WH) Legrand 414991 -01 set

Supply, fabricate, erect, connect, test and commissioning of factory made, CPRI approved, cubical type, Outdoor type LT panel board, double door, totally enclosed, dust, weather and vermin proof 1100 Volt, 3 phase, 4 wire system, 50 HZ , 415 volt supply made out by 3.15mm thick CRCA sheet for load bearing and 2mm thick for non load bearing, fully compartmentalised, with IP - 65 protection, painted with powder coated paint, and 4 side slanting canopy type roof on top, danger notice board, Suitable size of padastal frame 600mm hight above ground level including PCC work and dismantling of old LT panel and cable connection as per existing all as per conforming to IS-2417 of 1962, complete including the following accessories for each set, complete all as specified and as directed. (a) TPN, 4 Pole, MCCB ( Thermal magnetic protection) 100 Amps, 415 Volt, 50KA - 01No. (incoming) (b) 4 Nos bus bar of equal size made out of copper bus bar of suitable size with of rating 200 Amps, for ou going looping and branch connection system, mounted on non cracking resin type insulators - 01 Job. (c) Provisioning of copper tinned cable glands for incoming and outgoing cables - 01 Job. (d) Indication lamps R, Y & B - 01 Set

Supply, erection, testing and commissioning of outdoor type LT Bus Bar Chamber box in replacement, platform mounted, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos stepped type Aluminium bus bars 400Amps capacity for looping & branch connection system .The chamber shall be painted with powder coated paint. The bus bar chamber shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 (a) The bus bar chamber shall be made out of 3.0mm thick CRCA mild steel sheet and 3.00mm thick gland plate , front door (01 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and angle iron padastal frame 600mm high above ground level. The bus bar chamber shall be provided with ventilation facility in the form of louvers for better heat dissipation. (Note : The bus bar chamber Box shall be designed in such a way that adequate workable space is made available inside the compartments and the size of the chamber shall not be less than 600mm height (without base frame & canopy), 500mm width and 400mm depth).

Supply and fix outdoor type pole mounted LT Bus Bar Chamber box, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos stepped type Aluminium bus bars 200Amps capacity for cable connection system including necessary clamps for fixing arrangements .The chamber shall be painted with powder coated paint. The bus bar chamber shall be provided with suitable lockintg arrangements and fixing arrangements in steel tubular pole, complete all as specified and as directed. (a) The bus bar chamber shall be made out of 1.5mm thick CRCA mild steel sheet (Note :The bus bar chamber Box shall be designed in such a way that adequate workable space is made available inside the compartments and the size of the chamber shall not be less than 320mm height 290mm width and 200mm depth).

Earthing with GI earth plate electrode 600x600x6 mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron strip of 32mm x 6mm earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth strip protected by GI Pipe 40mm bore (light grade), including concrete pit using PCC (1:3:6) type C-1,precast RCC (1:1.5:3) type A-1 cover slab with one handle for lifting, funnel with wire mesh, 20mm bore galvanised or steel pipe (light grade) for watering, charcoal & salt in alternative layers including necessary excavation and earth work in any type of soil complete all as shown in electrical plate No. 3 of SSR-2009 Part I, complete all as specified and as directed.

Earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point, complete all as specified and as directed.

M & L for junction box hot press moulded SMC of 295 x 195 x 100mm and outside dimention 32 with locking arrangements consisting of necessary suitable arrangements for incoming & out going cables with cable glands & having TPN Bus bar 100A amps capacity with necessary base insulator and including necessary flat iron clamps with nuts, bolts & washers, complete all as specified and as directed. Make- Sintex Industries Ltd or equivelent make.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

APARAJITA GROUP OF CONSTRUCTION (BID ID -3140561)

ANTHONY PRADHAN (BID ID -3140533)

MS BRAHMA CONSTRUCTION (BID ID -3140556)

RAMESH GURUNG (BID ID -3140535)

M/S JAYSHREE CONCERN (BID ID -3140547)

HEM RAJ GURUNG (BID ID -3140550)

DEEP CHANDRA JOSHI (BID ID -3140538)

G K SUTHAR (BID ID -3140551)