Construction of civil works of proposed addition in SHB at 220 kv ss Gaunsgarh

Amount

Earth work in excavation in fdns,trenches etc in all kinds of soil where pick jumper work is not involved & not exceeding 2.00 mtr depth i/c dressing of bottom & sides stacking the excavated soil clear from the edge.

Supplying and filling of good earth

Disposal of Earth/debris

Dismantling B.W. in cement

Dismantling of 1:4:8 or 1:5:10

Scraping of Brick

Recovery of bricks

Recovery of brick bats

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Cement Concrete 1:6:12 with 40mm gauge stone aggregate

Cement Concrete 1:8:16 with 40mm gauge stone aggregate

Cement Concrete 1:2:4 with stone aggregate

RCC M-20 machine mixed and vibrated excluidiing steel reinforcment & shuttering in fdn.

RCC M-20 machine mixed and vibrated excluidiing steel reinforcment & shuttering in superstr.

DPC 7.5 Cm thick of CC 1:2:4 with 2- coats of bitumen 20/30 penetration @1.65 kg/sqmtr laid hot & sanded

DPC 4.0 Cm thick of CC 1:2:4 with 2- coats of bitumen 20/30 penetration @1.65 kg/sqmtr laid hot & sanded

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:5

First class Brick work laid in cement sand mortar 1:4 in foundation & plinth

First class Brick work laid in 1:4 in 1st storey up to 4.00 mtr above plinth level

Extra for c above 4 meters (where any single storey exceeds 4 metres in height) for every additional height of 2 metres or part thereof for Brick Work/ Concrete Block/ Clay Block.

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16

Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 2.5 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)

Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.UPVC 110 mm bend

Base course of floor consisting of 100 mm thick CC 1:8:16 & 100 mm thk sand filling using mechanical mixer for mixinf of material.

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ).Size 600x600 mm

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours

Coloured glazed tiles 20 cm x 20 cm and 5 mm thick in skirting and dado on 12 mm thick cement plaster 1:3 in baseand jointing

12.5 mm thick cement plaster 1:4

12.5mm thick cement plaster 1:5

12.5 mm thk. Cement plaster 1:6 inside the SH Building

20mm thick cement plaster 1:4 in two coat work

20 mm th. Cement plaster 1:5

20 mm thk. Cement plaster 1:6

10 mm th. Cement plaster 1:4

20mm thick cement plaster in damp proof course 1:3 with two coats of bitumen at 1.65Kg. Per Sqm laid hot and sanded Vertical

Bearing plaster of 10mm th cement mortar of ratio 1:3

Plinth protection in flat brick flooring in CM 1:4 on 4" CC 1:8:16 and 4" sand filling

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete

Providing and fixing aluminum work for doors, windows, ventilators and partitions Fixed portion for chowkats

Providing and fixing aluminum work for doors, windows, ventilators and partitions for shutter portion

P&F 12 mm Prelaminatrd particular board flat pressed 3 layers or graded wood particular board conforming to IS 12823 in panneling fixed in al. doors with CP brass/stailess steel screws compl;ete as per drawing

P&F glazing in aluminium doors windows ventilators shutters & partitions as per architectural drawings and the directions of engineer incharge

Providing & fixing aluminium sliding bolts ISI marked anodized transparet or dyed to required colour or shade with nut & screws etc.complete:250 mm x 16 mm

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 metres

Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work.

Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and tothe entire satisfaction of engineer-in- charge.

Wiring fan point (With fan box)

Wiring light point

Wiring 6Amp. wall socket point

Wiring 16/20Amp. power plug control point

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq.mm, 1100volts grade

Overall size 2.5sq.mm (Un-sheathed)

Overall size 4sq.mm (Un-sheathed)

Supply & erection of Heavy gauge welded conduit pipe 25mm dia. (ISI marked 1.60mm thick) On Surface

Supply and erection of switches, sockets, power switch and sockets and other accessories Ceiling rose (flush piano type)

MCB Single Pole 0.5-4amp. (10kA, Curve- C)

Sheet metal double door S.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating MCB's/ RCBO/ RCCB's, 16 way each

Miniature circuit breaker triple pole 0.5 to 4amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply

Providing and laying, jointing, fixing and testing ISI marked GI pipe lines as per ISI 4985-2000 15mm 3/4” dia

Providing and laying, jointing, fixing and testing ISI marked GI pipe lines as per ISI 4985-2000 20 mm dia

Providing, fixing and jointing Union Couplings in G.I. Pipe lines. i)1/2” dia (15mm) i/d pipe line

Providing, fixing and jointing Union Couplings in G.I. Pipe lines. ii)3/4” dia (20mm) i/d pipe line

20mm i/d Gun Metal peet valve heavy pattern.

Providing, fixing and jointing gun-metal peet valves (Heavy Pattern) with hand wheels, on G.I. Pipe lines laid in the or inside buildings including all carriages complete. 25mm

Cutting holes upto 23cm square thorugh B.B. in mud walls for pipes, and making goo/d including repointing, replastering and finishing according to existing finish where required through wall 22.86 cm thick

Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good including repointing, replastering and colour or white washing where required Through floor or roof 15.00cm thick

Providing & Fixing in postion 15 mm i/d bib cock of best quality (as approved by the Engineer-in-charge).

Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-incharge).

PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. minimum depth of water should be 150mm with a inimum seal 50mm with 75mm i/d outlet shallow seal

Providing & fixing in position best Indian make (to be approval of the Engineer-incharge) vitreous Chinware white flat back or angular lipped front urinal size 440 x 315 x265 mm C.P. brass flexible tube connection 450 mm long.

P & F in position Chinaware Europeon type water closet P-trap or S-trap ( to be approved of the Engineer Incharge) suit consisting of 10 ltr PVC flushing cistern

Providing and fixing in position best Indian make white ordinary lavatory suites consisting of C.P. brass waste 32mm dia, pair of angle iron bracket with one C.P. brass tap complete.Size 550 mm x 400 mm

Providing and fixing in position towel rails / ring fixed in with rawl plugs embedded in walls with brass rews, complete in all respects including cutting and making good the walls etc.

Providing and fixing in position acrylic size 510x130 shelf fixed in with rawl plugs with C.P brass screws complete ncluding cutting and making good the walls etc.

Providing & Fixing in position best indian make bevelled edge 5mm thick mirror mounted on 4mm thick ardboard sheet ground fixed in position by means of 4 nos. chromium plat

Earth work in excavation for storage and sedimentation tanks, For all classes of soil except rocky.

Extra for providing & fixing PVC 32 mm dia waste pipe up to floor level & plumbing joints

R.C.C. Manhole cover 500mm i/d Heavy duty

R.C.C. Manhole cover Light duty Rectangular single/double seal pattern 450mm x 600mm clear inside opening

Construction of brick masonry inspection chambers Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal

Construction of brick masonry inspection chambers Extra for every 0.30 m depth of inspection chamber.

Providing and fixing in position best quality stainless steel sinks with complete fitting.

P & F ceiling fans standard make 1400mm sweep with regulator . Bajaj ,Crompton/G.E.C./ Philips/ GEC/Khaitan make.

Supplying and fixing exhaust fan 18” sweep of Crompton Make including louver ( MODEL T5JB1328EB) of 1x28 W T-5

Supplying and fixing General Purpose Tube Fitting of Crompton Make on wall (MODEL DIJB12414EB9)) of 1x36 W

Supply and fixing ceiling light of 2'x2' of crompton make

Supllying & hoisting of Ferro Cement Trench Covers- .65 x .65

Providing and fixing various size of cable racks

Providing and fixing Angle iron nozing of 50x50x3mm

Providing and fixing Angle iron nozing of 30x30x3mm

Providing and fixing MS Chequered Plate 5mm thick

P&F Wire guage to aluminium chowkhat with screws etc. complete in all resoectas directed by engineer incharge.

Extra Carriage of Fine sand

Extra Carriage of Cement

Extra Carriage of Steel

Landing rate including extra carriage and difference of rate of crusher 13.2/12

Landing rate including extra carriage and difference of rate of crusher 11.2/12

Landing rate including extra carriage and difference of rate of Stone ballast

Landing rate including extra carriage and difference of rate of Coarse sand

Landing rate including extra carriage and difference of rate of bricks

Landing rate including extra carriage and difference of rate of tiles

Bidder Name

Amount in Words

THE MOHAN KE UTTAR COOP L AND C SOCIETY LTD

THE JAND WALA COOP L AND C SOCIETY LTD

MS RAKSHA CONSTRUCTION CO.

THE MOHAN KE UTTAR COOP L AND C SOCIETY LTD

THE JAND WALA COOP L AND C SOCIETY LTD